Need help exporting to QuickTime!

Here's what I'm trying to do: export a presentation, with audio narration imported from AIFF files for each slide, to a QuickTime movie that runs, start to finish, without any key clicks and with my audio and animation/transition timings intact. I can't figure out how to do this. Keynote wants either manual advance or auto advance based on a universal transition/animation timing (no good).
I've built my entire Keynote presentation and recorded the audio narration (with effects) using GarageBand. I've added the audio to each slide individually after exporting them as AIFFs from GarageBand. I've worked out all the animation timings, and set the automatic transition timing for each slide (sadly I had to do this manually - Keynote can't figure out that I really don't want the slide transition after the last animation, but after the audio clip attached to that slide ends sigh).
When I view the presentation, it looks (and sounds) great. It runs through the entire presentation automatically, the timings are all correct, and the audio sounds good. But I can't export to QuickTime and emulate what I'm seeing when I run it in Keynote. Is there any way to do this in Keynote so I don't have to rely on a screen capture program? Any advice appreciated...

I tried a new experiment with a fresh, new Keynote presentation. Plain white background. Three words that animate, each On Click. Move In, Bottom to Top. .2 second speed. Dragged my WAV narration file to the slide. Recorded the presentation, animating each word manually at the appropriate point in the narration. Playing back the recording in Keynote looks and sounds as intended. Exported to QuickTime. Narration starts, first animation doesn't appear in time. As soon as first animation appears, audio cuts off completely. Other two animations appear, with no audio.
I even tried a different font this time (a standard OS X font). This can't be a problem with my presentation file.
Something is wrong with the QuickTime exporting function. I'd love to know if anyone has had success (visuals and audio in sync) exporting to QuickTime after importing your narration (or sounds) by dropping an audio file on the slide.

Similar Messages

I need help exporting pages newsletters as single page PDF's or as a .jpeg for an online photo book.

need help exporting pages newsletters as single page PDF's or as a .jpeg for an online photo book.

No same idea: 1. Look 2. Try.
This is in Mavericks:
Peter

I need help exporting Apple Mail messages to Outlook for MAC 2011

Good morning,
I need help exporting Apple Mail messages to Outlook for MAC 2011. Please....

It is possible to do this without external tools, but it is a tremendous faff. See
http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macoutlook/import-ema il-from-mail-to-outlook-2011/5e858173-e1f4-4adc-99d7-253cc467169d?page=2 for details.
The easiest way, however, is to use Mail Exporter Pro https://itunes.apple.com/us/app/mail-exporter-pro/id675131616?mt=12 which will convert the email for you from one format to the other, and comes with an excellent manual.
A third possibility is to connect Apple Mail to an email account via IMAP (this doesn’t have to be your usual account, you can just create a Gmail account for the purpose) . Copy all the messages into it and they will be uploaded. Then connect Outlook 2011 to the same account, via IMAP again, and let the messages download, then copy them to wherever you want to keep them and disconnect from that account. This is slow but preserves the attributes of your email (e.g. read/unead) better than any other method.

Need Help Exporting Previous Recipients to File

Need help exporting "Previous Recipients" to file not to Contacts. Sorry if this is a duplicate, I can't find this answer
anywhere for Maverick. Thanks.

Hi,
This'll do what you're after:
$out = @()
$mbxs = Get-Mailbox -Identity '*smith*'
foreach ($mbx in $mbxs) {
$whenCreated = $mbx.WhenCreated
$out += Get-MailboxStatistics -Identity $mbx.SamAccountName |
Select DisplayName,TotalItemSize,ItemCount,LastLoggedOnUserAccount,LastLogonTime, @{n="WhenCreated";e={$whencreated}}
$out | Sort DisplayName | Export-Csv .\mbxStats.csv -NoTypeInformation
Don't retire TechNet! -
(Don't give up yet - 12,950+ strong and growing)

Need help need help exporting epub to iTunes Producer

Need help need help exporting epub to iTunes Producer. Nothing will load only get that little spinning wheel.

It's not necessary to post a second time. I'm locking this version so others may reply at the first thread you created:
Hi I created a EPUB with indesign cc and I'm trying to submitted it to iTunes Producer

NEED HELP EXPORTING...

Can anyone help?
I am new to Final Cut Pro 6 and I have just finished my first video for my company that we plan to put on our website. The video uses 4 Video Tracks and 5 Audio Tracks. Currently I have the the video finalized and save in final cut pro. I would like to export the video to a wmv format (what the 3rd party video host is asking for) at 300 kb/sec rate.
When I go to File>Export>Using Quicktime Conversion>
and change the format to WINDOWS MEDIA and hit save.. I get an error stop sign with an exclamation point saying 'Inconsistent Audio Sample Rate-- The media you are exporting contains audio with multiple sample rate'
What do I need to do to correct this so I can export it as a wmv?
Whoever can help thank you I am very VERY frustrated and need to get this done.
Victoria
Any help is appreciated.
Please email me too at [email protected]

don't double post. I find them VERY frustrating. See solution in reply to your first post.

Need help exporting .mov files for editing in PE3

hi,
i'm trying to export HD .mov files from an Aiptek GO-HD camcorder that seems to record in QT format with some funky codecs. I need to export it into a format that i can edit on a PC using Premier Elements 3.0. The few tests i've run have shown a huge increase in size when exporting from .mov to .avi (100m to 30 GB).
Does anyone have any suggestions or experience doing this?

You just need to open the .mov file with Elements.
You don't need to convert it using QuickTime Pro
first.
Premiere may "convert" it to some other format to
allow editing (I don't know) and that would only take
some time at import.
HD files are anywhere from 10 to 60 MB's per second
(some even higher) so a DV version will drastically
increase in file size.
What, besides editing, is the goal of your work?
that doesn't work with this camcorder. apparently the encoding is called QT, but it really isn't. i have to export into something else in order to edit.
the goal of my work is to convert choppy family video into something clean that i can share with friends and family via CD / DVD (not streaming on net).

I need help with my QuickTime!

Well, my quicktime on the internet doesnt work. All i can do is hear the audio, even for videos on the apple website. I see the quicktime logo while its loading, but then the audio player/bar thing (that normally is under the viewer while playing videos) appears in the middle and I see no video. Whats wrong?

Hi -
Hard to say what it might be. Try deleting your Quicktime preferences (it's at User/Library/Preferences/com.apple.quicktimeplayer.plist) then launch the app again and see if things improve. If not, try downloading the app itself from the Apple site and then reinstalling it...
http://www.apple.com/quicktime/download/
Sometimes Quicktime needs help via 'plugins' to view certain content. You might try installing this plugin, although you should be able to see all the content on the Apple site without any special add-ons...
http://perian.org/
Are you using a browser other than Safari?

Need help exporting animation to Wordpress (I've looked at all the tutorials I could find).

Alright, I've been working on a slide show animation for sometime now, but I need to export it to wordpress and I can't exactly understand how to do it correctly. I've even used the edge wordpress plugin, but it doesn't seem to work at all (I tried on two different sites, first seems to be a projram script error, the other site didn't upload anything). I've done a few of the tutorials floating around but none of them make sense to me, I don't know exaclty which parts of code to edit and in which clients to work them in. If someone could help make these five hours of confusion make sense for me that that would be amazing.
Where should I start on trying to get my animation to wordpress?

I've come with the same issue myself. I love Adobe Edge and i find it dead easy to make wonderful stuff there, though making it work in Wordpress has become a challenge. I followed the instructions in this video and in this guide and they seem to work only if you happen to use wordpress with a plain theme with no fancy jquery animations and functionality using these libs. I tried intergrating an Edge animation in my wordpress site, though because i happen to use a theme with a slider which uses jquery, when following the instructions step by step then neither the slider worked neither the edge animation itself. I found somewhere that you need to edit some .js libs using the noconflict mode though that did not work either (it was an example for joomla).
I tried installing the Edge Suite wordpress plugin which is still in developing stage. You need to export your Edge composition using the File > Publish tool found in edge in order to import the .aom files. Unfortunatelly no luck with that. I'm still looking for a solution in order to make animations for my website. I sent a tweet to Adobe Edge and they refered me to the support forums. Uhg!
I'm sure there's a workaorund using the .js libraries. Im not experienced with them so i'll have to wait for a solution to come about. I'm sorry for not helping though be sure to check the links above

I need help export on dvd premiere pro cs4

Hi, I am a new consumer of Premiere Cs4 and I need help. I have used, in my life, only simple authoring programs as well as Pinnacle studio and now I have some problems with Premiere. I hope that someone help me and it answer my simple questions.
1) In studio I knew, in real time, how much space the project occupied on the DVD but in premiere? How I can know speedily how much space occupied my project? I have noticed that the space occupied is visualized in encore but it is the unique methods for to have this information?
2) Because the space occupied from the project not change when I change the preference of project? An example: I create a project and I export it in encore. I set bitrate 8 and the project occupied 50mb. If I change the bitrate, an example 6, the space occupied not change! Why?
thanks

Projects don't have a bitrate. You choose your desired bitrate when you export.
You will find links to many
free tutorials in the PremiereProPedia that will quickly show you how things are done in Premiere Pro.
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

Need help w/ iTunes + Quicktime

I just recently downloaded the new version of iTunes (without any success) and now I can't access iTunes or Quicktime. I am also having trouble uninstalling Quicktime from my computer. Here's what I have done, so far.
1)I have uninstalled iTunes
2) I tried to uninstall Quicktime, but when I go to remove/add programs, I don't see a "remove icon". It only says the program is "rarely used". What to do?
3) When I click on the start menu and go to program, Quicktime is on the list, but when I hold the cursor over the QT icon and click on the uninstall option I get this message: "This action is only valid for products that are currently installed". This leads me to believe that Quicktime is actually not on my computer. But how can I be sure? What to do?
4) I have also had no success when I try to reinstall any version of iTunes + Quicktime or iTunes as a stand-alone program. I am simply stumped and need help.
TIA...Rick

Try and use Microsoft's Cleanup Utility and then reinstall Quicktime/iTunes:
http://support.microsoft.com/kb/290301

I'm kinda new to FCP and need help exporting as widescreen

Hi people,
Please help me if you can!
I've been editing a video in FCP, it was shot in 16:9 and I've been editing in 16:9. The movie looks great when I view it in FCP.
However, when I export and select 'DV PAL 48 KHz Animorphic' the finished .MOV isn't widescreen, it's stretched and doesn't look right.
Can anybody suggest any ideas?
THANK YOU

You can use "export using quicktime conversion". Under video, select PAL DV. Then under size select custom and force the size to be 854 x 480. That will make your final .mov file display as 16x9.
or...
if you have quicktime pro you can take the original clip you exported earlier and open it, hit command J, then under the video track you will see controls on how to display your video. Make the ratio equal to 16:9 and hit save.

Need help exporting HDV 1080i60 - please help!

OK, I'm a video editor, and I've been cutting standard-def stuff for years now. I've literally just started editing HDV material. Here's my problem:
-Imported HDV 1080i60 footage from a Sony V1U camera, via firewire.
-Edited the project natively, in HDV 1080i60 sequences, everything went smoothly. Playback looks great, everything is swell.
-Exported MPEg2 for DVD delivery, and again, everything looks great.
-When I export the sequence using either Compressor or Export to Quicktime, using the HDV 1080i60 settings, the resulting Quicktime clip cannot playback without stuttering. It's a 20 minute clip - the resulting Quicktime file is about 5GB. The video quality is fine - but I can't get it to play back without the stutter. It basically looks like I'm trying to play a video file without sufficient RAM. But I doubt that's the case. I've got 4GB of RAM, and like I said, the video plays fine in Final Cut Pro.
Any help would be greatly appreciated. I'm trying to deliver the final Quicktime file to my client on a hard drive, so they can playback the HD material on their own computer. Thanks in advance!

I think what is going on is that your machine doesn't have the horsepower to play the QT file back without dropping frames. Your client's machine will probably have the same problem. FCP degrades its display without dropping frames to maintain speed, QT always attempts full resolution, and drops frames to compensate.
Check the playback frame rate in the Quicktime viewer. If it is anything less than 30FPS, QT is dropping frames to maintain real time audio playback. The solution is to create a more forgiving movie.
Try 720p24, for the most benign files. These will even play on a Mac Mini without stuttering.

Need help exporting large file to bitmap format

I have a large file that I need to export to a bitmap format and I am experiencing unknown "IMer" errors, memory and file size limitations.
The file contains only one artboard of size around 8000 pixels by 6000 pixels. I can successfully export as a png at 72dpi giving me a 100% image of my AI file. However I need to export an image at 200% of the AI file. If I export as a png at 144dpi to achieve this I get the following error(s)
"The operation cannot complete because of an unknown error (IMer)" or "Could not complete this operation. The rasterised image exceeded the maximum bounds for savung to the png format"
I have tried exporting as tiff, bmp and jpeg but all give "not enough memory" or "dimensions out of range" errors.
Does anyone know the limitations with AI for saving large files to bitmap format?
Does anyone have a workaround I could try?

You could try printing to Adobe Postscript files.
This will actually save a .ps file and you can scale it to 200% when doing so. You'll need to "print" for every image change.
Then open a Photoshop document at your final size (16000x12000 pixels) and place or drag the .ps files into the Photoshop document.
I just tested this and it seems to work fine here. But, of course, I don't have your art, so complexity of objects might factor in and I'm not seeing that here.
And you are aware that Photoshop won't allow you to save a png at those dimension either, right? The image is too large for PNG. Perhaps you could explain why you specifically need a png that large???

Need help exporting Quicktime on FCE 3.5.1

I edit HDV on FCE 3.5.1 and every time i export Quicktime, it comes out looking squeezed and not widescreen, and only saves as Quicktime movie and not FCE movie file like it used to when i first got it. and also how can i export for ipod in widescreen format as well because it it doesn't do that any more, has this got to do with my last update? because i can't seem to import LiveType to FCE anymore it keeps giving me an error report, so i'm going crazy trying to figure this out can someone please help.

What format are you working in exactly? 1080i HDV is squeezed. You can change the display in QuickTime to 1920. You may need the QuickTime Pro player for that.
"only saves as Quicktime movie and not FCE movie file like it used to when i first got it"
Don't know when you first got it but in early versions of FCE the export function was called Final Cut Movie. It's now called QuickTime Movie. Either function does the same thing.
iPod compression was changed in QuickTime. You'll have to export for either iPhone or iPod and change the output size to a widescreen format.
You'll probably need to completely uninstall and reinstall LiveType. Not the LT media content, just the application and preferences and receipts.

Need help exporting to QuickTime!

Similar Messages

Maybe you are looking for