NEED HELP FAST! iv turned my iphone on and the apple sign has come up but thats all thats happening?
how can i turn my iphone on, iv pressed the button on the top of the phone but nothing happens all that has come up is the apple sign, i really need my phone on, as i cant take the sim card out and put in another phone because its too small!
Hold the HOME and SLEEP buttons until an Apple logo appears (10-15 seconds). If that doesn't fix it you will have to connect it to iTunes to restore it. If you have a problem with restoring, see:
iPhone and iPod touch: Unable to update or restore
Similar Messages
-
Hey guys, i need HELP !!!My iphone 6 just gave stolen .... But i hope that can take all the photo back... Total is almost 3000 pc ... But my icloud storage just 5gb only ... If there have any ways to let me get back those photo ? Those photo really mean a lot to me .... Have alot of memory with family ... It's very meaningful !!! Please kindly help me !!! Thanks
Please please help me, if you know how.
-
i was updating to ios7 and my phone turned off and now it wont turn back on. it shows the apple sign but it slowly fades away and so on. Help!
Hello there, RFJA2211.
The following Knowledge Base article offers up some great troubleshooting steps for unexpected power off of your iOS device:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
My Ipod will not turn on. I held down the power and home button for several seconds, and the apple sign shows up. Itunes doesn't even recognize my Ipod. HELP!!!!
How do I restore my Ipod when Itunes doesn't even recognize it???
I don't care even if I loose all my songs and apps, I just want me Ipod to work again!!!
PLEASE HELP!!!! THANKS IN ADVANCEI ended up on this link, which related to my problem:
http://support.apple.com/kb/ht1808
When I got to step #3 (While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.) my Ipod would not turn on, and Itunes did not recognize my Ipod. :S -
I can't turn my iPhone 4 and the Hold button is stuck, any advices?
I can't turn my iPhone 4 and the Hold button is stuck, any advices? And my iPhone has been in charge for few hours and nothing happens.
Try a reset: hold down the sleep/wake button and the home button at the same time for about 10 seconds, until an Apple logo appears on the screen.
-
Will a factory unlocked iphone 4s from the apple retail store come with a simcard.
Will a factory unlocked iphone 4s from the apple retail store come with a simcard.Furthermore will my new phone need to be activated in store or can i do it myself
No. You'll need to get a SIM from your carrier. Since you won't have a SIM, there will be no way to activate the iPhone at the store, so you'll have to do it yourself.
Regards. -
Hi, I dropped my i-phone 4 down the toilet 6 days ago and have left it in rice to dry out. When i try turning it on there is no power. I connected to charger and the apple sign appears. After a while it shows iOS6 on screen and then asks me to connect to i-tunes however my i-phone does not appear on i-tunes. Can you advise me what to do next?
Make an appointment at the genius bar and take your credit card. An out of warranty replacement is $199 for a 4S, $149 for a 4.
-
my ipad give me the apple sign without running up it appears all the time in the screen , i tries to reset my ipad , but still in this problem , can you please help me?
You may want to look at this about using recovery mode to restore your iPad.
http://support.apple.com/kb/ht4097 -
i was updating my iphone 4 and and it frozzen on loading bar and the apple sign how do i fix it
http://support.apple.com/kb/HT1808
-
I was trying to fix the internet on my iPhone so I turned it off and back on, then it still wouldn't work so I i turned my iPhone off and now it won't turn back on. Now when it's plugged into the wall or the computer the Apple Logo comes up for about 6 seconds and turns off, then back on for another 6 seconds then turns off again and it just repeats, and it really frustrates me. What can I do to fix it?
I had a similar issue with my phone.....it just shut off and wouldn't come back on even thought it was charged. My daughter toggled the mute switch several times and then she pressed and held down the home and lock buttons. It worked......would be worth a shot.
-
I was using my iPhone 5 and the screen now has black
I was using my iPhone 5 and my screen now has black and white lines on it. I'm unable to do anything on it. Any suggestions please?
Sounds like you'll have to take it in to the Apple store for service. This happened to my wife's iPhone and they just replaced it.
-
Need help with my iTunes on iPhone 5 and Macbook Pro
Need help with my iPhone 5 and my Macbook Pro. I was purchased some music on itunes at my mac. Some reason I deleted those music from both on Mac and iPhone 5. Today, I went to my iPhone iTunes store inside of iCloud to redownload my puchased. But those song won't able to sync back to my iTunes library on my Mac. Can anyone help me with that ??....
You've posted to the iTunes Match forum, which your question does not appear to be related to. You'll get better support responses by posting to either the iTunes for Mac or iTunes for Windows forum. Which ever is more appropriate for your situation.
-
I need help to be able to see if I can fix this or something.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Is it pretty striaght forward or can I just power off my old phone and activate our new ones?
Thanks for taking the time to reach out, Iowan83! I am excited to see you activate the new phones as well! There will be instructions in the box that will direct you to call an automated system for the terms and conditions to be accepted. From there you will simply turn off old phone and turn on each device, then follow on screen prompts. Please feel free to reach back out if you need any additional support.
Thank you,
YaleK_VZW
Follow us on Twitter @VZWSupport -
Please help!
I'm sorry, you are correct I am trying to restore my ipad because it stopped working. We thought the battery was dead so we plugged it into the wall charger. All it does when plugged in is flash the apple logo like it is going to start up and then shut off. It repeats this every few seconds while it is plugged into the wall. I let it charge overnight and still nothing.
When I hold the power button and the home button down together while the ipad is plugged into the wall, it does flash then after I release the power button the connect to itunes screen comes on. But when I connect it to my computer it goes blank. itunes does not recongnize my ipad when I plug it into the computer. I have used the same cord to plug in my other devices and itunes recongnizes them so it isn't the usb cord.
It seems as if my system has crashed and I think this may just be an apple service trip for me. But thanks so much for the advice. =D
Maybe you are looking for
-
I have a 2g iPod Touch. I verified that I coudl connect via wifi from home and from a public wifi location before leaving on a trip to UK. However once I left I could never get net access on nay public or pasword wifi spot. I could get connected acco
-
the email address is alread in use or you may already have an apple id associated with this email address. please try again or sign in using your existing apple id............ PLEASE HELP ME
-
Odbcad32.exe errors when creating DSN using 9i client and 9.02.00.65
Hi, I am about at the end of my rope. I have a brand new Windows xp sp2 machine. I have tried installing, uninstalling deleteing all registry keys, deleting directories, installing the full 92010NT_CLT then installing just the run time, then installi
-
How to Declare Arrays in bpel and use them as acollection
Hi, I Am new to Bpel, I had created an empty Bpel Process and configured file adapter to a directory, In my text file i have 3 records with four columns, each column seperated by ',' and each record seperated by "EOL(end of line)", Below is the xsd f
-
Unable to print,photocopy and scan
Hi there, My printer unable to work after the paper jam occur . It still not working even the paper jam was removed. How I can solve this problem? is that my printer was broken?