Need help fast, project due in Three days...

I made a really basic video on iMovie for school, my very first movie, and am having some problems with the quality. The movie was all finished then I shared it, or exported, or whatever to the desktop as and mpeg. The quality though was all pixelated and blurry after it finished. I can't burn it directly with iDvd because my laptop does not have a dvd burner. I need to save it in a good quality format, burn it and turn it into a dvd on my desktop. What is the best way to save my movie without damaging quality, because one of the requirements is to not have blurry images. If you could give me all the settings of what you guys use or any other tip I would appreciate it.

Another option would be to creat your idvd on your present mac but when you come to the point where you are going to burn the disk, make a disk image (under the file tab). This is a smaller file and you can transfer it to another computer and burn it using apples disk utility.
Another simple way is to connect two macs together via a firewire cable. Boot your mac holding down the "T" key until you see a yellow symbol on a blue background appear. On the other machine you should see your hard drive appear on the desktop. Open your hard drive and get you imovie file or disk image out and add it to the 2nd mac. Close your hard drive and THIS IS IMPORTANT Eject it by dragging it to the trash. It is now safe to disconnect your two machines.

Similar Messages

Need help asap, project due monday!

Hey everyone,
I'm a college student and I have a final project due on monday.
I'm running into a MAJOR issue which I've never had before. I know this is probably a noobie issue but any help would be fantastic.
I have text on it's own layer, typed it directly into flash, there are two text fields on this layer. I created at motion tween to move the text from the center of my stage to the top of my stage at about halfway on my scene1 timeline and then it sticks there til the end of that scene. My issue is, my text will display and animate when I run the timeline in flash. But when I hit CTRL Enter for the preview, it's no where to be found. I've even tried embedding the text to see if that would help! Kinda freakin' out here, so any help would be great. Does anyone know why this is happening?
I'm using Flash Professional CS5 with an ActionScript 3.0 file.
Kindest Regards,
Dingo

post a link to your .fla and i'll take a look

Need help asap, project due on monday!

Hey everyone,
I'm a college student and I have a final project due on monday.
I'm running into a MAJOR issue which I've never had before.
I have text on it's own layer, typed it directly into flash, there are two text fields on this layer. I created at motion tween to move the text from the center of my stage to the top of my stage at about halfway on my scene1 timeline and then it sticks there til the end of that scene. My issue is, my text will display and animate when I run the timeline in flash. But when I hit CTRL Enter for the preview, it's no where to be found. I've even tried embedding the text to see if that would help! Kinda freakin' out here, so any help would be great. Does anyone know why this is happening?
I'm using Flash Professional CS5 with an ActionScript 3.0 file.
Kindest Regards,
Dingo

Hey everyone,
I'm a college student and I have a final project due on monday.
I'm running into a MAJOR issue which I've never had before.
I have text on it's own layer, typed it directly into flash, there are two text fields on this layer. I created at motion tween to move the text from the center of my stage to the top of my stage at about halfway on my scene1 timeline and then it sticks there til the end of that scene. My issue is, my text will display and animate when I run the timeline in flash. But when I hit CTRL Enter for the preview, it's no where to be found. I've even tried embedding the text to see if that would help! Kinda freakin' out here, so any help would be great. Does anyone know why this is happening?
I'm using Flash Professional CS5 with an ActionScript 3.0 file.
Kindest Regards,
Dingo

My computer freezes and stops working I NEED HELP FAST I bought it 3 days ago from BestBuy brand new

my computer i bought 3 days ago from BestBuy brand new in the box freezes and stops working or not responding and lags all the time and i always have to push the power button on the computer for me to restart it because i cant do anything on my computer i cant use ctrl + alt + del or click on anything and i spent $965 on my HP Pavilion HPE Series h8-1224 computer with 10GB ram and 2TB HDD and 1024MB Video memory with windows 7 home premium 64bit...I need help on how to stop my computer from freezing up or lagging or not responding all the time because i dont know what program i installed last before it happened or what i did wrong i dont know i just want my pc running perfect forever

I did the First step and reinstalled everything and then its starting to happen again everytime i right click on the desktop or type anything or do anything on my desktop it freezes up or lags or the whole intire scrren goes away and all i see is my wallpaper on my computer and i try press Ctrl + Alt + Del it takes long then it says could not start Ctrl + Alt + Del and i try pressing Ctrl + Shift + Esc for task manager it that doesnt come up man i had it for 10 days now **bleep** is wrong with this new desktop cuz i had another HP desktop for 6 years then it died on me but this computer only 10 days and im already having problems what els can i do i already restored my pc and it formated my 2TB hard drive this gotta stop man its pissing me off i cant do anything

NEED HELP SCHOOL PROJECT DUE TOMORROW @ 7:45

I need someones help. I had to make a movie for my ap world history class, and @ the last process, which is audio entending(something like that) it freezes or known as not responding. Why does it keep doing this? Is there a SOLUTION?

You give too little details.
iDVD can appeear to be frozen, but it still works. This is especially true for the audio encoding. Depending on the complexity and duration of your project, as well as the power of your machine, the encoding phase can take long hours.
I understand you don't have time for experimenting, so here's what you can try:
- open Font Book;
- select all fonts that have a dot on the right;
- do Edit>Resolve Dupplicates.
Then try again with iDVD and your project. This time leave enough time, even if a right-click in the iDVD's icon in the Dock tells it's not responding.
And check you have enough free space: at least 10% of the HDD (general rule for Mac OS X), or 10 GB (some even say 20 GB).

Need Help Fast Please

Why does this code not do what I want to happen?
I have a 7 non functional buttons above the buttons for the days in the month and I would like to be able to layout the buttons starting on the day that the month begins and ending where it ends.
Like in the microsoft windows calander.
Any ideas as to how I'd do this?
I need help fast. Please.
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.io.*;
import java.util.*;
public class MyDairy extends JFrame
     //Initilises Global Variables
     myHandler H = new myHandler();
     monthHandler J = new monthHandler();
     openHandler O = new openHandler();
     String monthName;
     JComboBox months;
     static String[] daysOfWeek = {"Sun", "Mon", "Tue", "Wed", "Thur", "Fri", "Sat"};
     static int[] daysInMonth = {31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31};
     JFileChooser box;
     public MyDairy()
          //Initilises the JComponents
          JMenuBar menuBar;
           JMenu menu;
          JMenuItem menuOpen;
          JMenuItem menuSave;
          JMenuItem menuExit;
          JButton dayName[] = new JButton[7];
          JButton day[] = new JButton[36];
          JPanel b;
          JPanel a;
          Calendar today = Calendar.getInstance();
          Calendar startOfMonth = Calendar.getInstance();
          startOfMonth.set(Calendar.DAY_OF_MONTH,1);
          startOfMonth.set(Calendar.DAY_OF_WEEK,7);
          System.out.print(startOfMonth);
          //Sets up the Layout
          setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
          Container c = getContentPane();
          c.setLayout(new BoxLayout(c, BoxLayout.Y_AXIS));
          a = new JPanel();
          a.setLayout(new GridLayout(0, 7));
          b = new JPanel();
          b.setLayout(new GridLayout(5, 7));
          //Sets up and adds the menu bar
          menuBar = new JMenuBar();
          setJMenuBar(menuBar);
          //Adds the File menu
          menu = new JMenu("File");
          menuBar.add(menu);
          //Adds the menu items
          menuOpen = new JMenuItem("Open");
          menu.add(menuOpen);
          menuSave = new JMenuItem("Save");
          menu.add(menuSave);
          menuExit = new JMenuItem("Exit");
          menu.add(menuExit);
          //Produses the ComboBox
          String[] name={"January", "Feburary", "March", "April", "May", "June", "July", "Augest", "September", "October", "November", "December"};
          months = new JComboBox(name);
          int m = today.get(Calendar.MONTH);
          int d2 = today.get(Calendar.DAY_OF_WEEK);
          System.out.print(d2);
          months.setSelectedIndex(m);
          months.addActionListener(J);
          c.add(months);
          c.add(Box.createVerticalStrut(10));
          switch (months.getSelectedIndex())
                   case 0: for (int i=1; i<36; i++)                          {
                     if(i<4)
                        day[i] = new JButton();
                        day.setEnabled(false);               }
int k = 1;
day[i] = new JButton(" "+k);                b.add(day[i]);
day[i].addActionListener(H);               k++;
}break;
//other case statement up to 11 are simaliar          }
c.add(a);
          //Produces an Array of Buttons
          for (int i=1; i<36; i++)
               day[i] = new JButton(" "+i);
               b.add(day[i]);
               day[i].addActionListener(H);
          c.add(b);
          updateNameField();
          setSize(400,400);
          show();
     }//constructor
     private void updateNameField()
          monthName = (String) months.getSelectedItem();
     class myHandler implements ActionListener
          public void actionPerformed(ActionEvent e)
               new Text_Area(monthName);
     class openHandler implements ActionListener
          public void actionPerformed(ActionEvent e)
               File f1 = New File ("2003.dat");
               simpleSerializer S = new simpleSerializer(f1);
               MyDairy = S.readObjectFromFile();
     class monthHandler implements ActionListener
          public void actionPerformed(ActionEvent e)
               updateNameField();
     public static void main(String[] args)
          new MyDairy();

Container c = getContentPane();
c.setLayout(new BoxLayout(c, BoxLayout.Y_AXIS));don't code like above try something like...
Box box=Box.createVerticalBox();
c.add(box);
----so on
Hope this will help...

Need help fast with a buying decision - Leadtek 6800 GT

Hi there, I have the opportunity to swap my Club 3D 6800 GT for a Leadtek 6800 GT. The reasons I would do this would be the cooling and the games bundle.
I just wanted to know if anyone knows how the cooling is on this particular card and if it would be better than the reference design?
My other concern is that it has a huge copper heatsink on the back of the card, this would sit directly under the CPU HSF. There really would only be a few millimeters between them and due to the position of the socket on this board, the heat sink fins go up vertically. Would the heat from the card's copper heat sink rise up into the CPU HSF grooves and raise the temperature of the CPU?
Thanks for any help
I kind of need help fast as someone said they were gonna buy my other card of ebay today, there's still time to stop them if this is gonna be a bad idea

i would definately take the leadtek one over the club3d card, the cards themselves are all based on refrence designs just different cooling solutions and bundles
and the cooler on the leadtek is a lot better, and it isnt more noisy then the club3d one at all
it has better cooling, and they seem to be the ones which are the most available, and they overclock very well due to the better cooling

Problems with exporting. Need help fast

So I recorded some video game footage (Battlefield 4) and when I look at the raw file, it says it's 1920x1080. I edited it and finished it and even if I look in info it says that it's 1920x1080.
But when I try to export the video it says that the source file is 1280x1080
So when I export it, it is in REALLY bad quality and I usually upload high quality videos! What do I do? I need help, fast! I have Adobe Premiere Pro CS6.
I have a i7 3770k CPU so I don't think that is an issue. 8GB of ram aswell.

Quickest way:
Get Started with Premiere Pro
New to Premiere Pro? Get started with your first project — editing a video. In less than an hour, you'll learn to edit together different types of media to tell a video story.

I NEED HELP FAST!!! how can i activate wi-fi if i want to use that for facebook apps instead of wasting my data?

i want the 200 mb plan for my iphone and wanted to know if instead of using safari i can use apps such as facebook or tumblr without using up my data. i got the asnwer that i can avoid that by using wi-fi, but how does that whole thing work?
sorry i am a bit new at this, and i need help fast!
THANK YOU!

hookedonlerman wrote:
but will that replace the use of using up data? (wifi & 3G)
It sounds as if you don't really understand what "using data" means. Data is not something different from WiFi and 3G, it's something sent over WiFi and 3G. Think of data as water and WiFi and 3G as types of pipes. Some apps need to send and receive data to work. That data can be sent or received in different ways. It can be sent over WiFi or 3G. Both official iPhone carriers in the U.S. have metered data plans. It's sounds as if you're talking about AT&T's 200 mb data plan. WiFi is not provided by your cellular carrier. You can have WiFi from your Internet Service Provider at home or you can access free WiFi at places like McDonalds or Starbucks or paid WiFi at places like airports.
If you have WiFi turned on on your phone and WiFi is available, the phone will default to WiFi. WiFi is faster than 3G and generally not metered, and is sometimes even free. If you are out of range of WiFi, you would be using 3G to send and receive your data. With a metered plan, you need to keep an eye on how much you are using because if you go over your allowance, you will be charged additional fees.

My daughter has spitefully changed my password and has refused to tell me. I have so much medical information that I can not lose. Is there anyway to get around this problem. Please I need Help fast.

My daughter has spitefully changed my password and has refused to tell me. I have so much medical information that I can not lose. Is there anyway to get around this problem. Please I need Help fast.

Connect the iPod to your syncing computer and restore it via iTunes. However, if iTunes asks for the unknown passcode you need to place the iPod in recovery mode and then restore the iPod from backup. For recovey mode see:
iPhone and iPod touch: Unable to update or restore
"If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone and iPod touch software."
Above is from:
http://support.apple.com/kb/ht1212

My little brother messed up with my iPod touch 4th Gen by entering the wrong password , now all data is beeing erased what should I do.The iPod is just showing the Apple Logo and some buffering icon below it.Need help fast!I'm really worried!

I really need help this has happend 5 hours ago and the ipod os still showing the apple logo and the buffering icon below it!
It re booted several times till now.
Need help fast!

- I suspect that he went to Settings>General>Reset>Erase all content and settings. For 1G or 2G iPod that can take hours and it will likely stall out if not connected to a charging source.
Try the following:
- A reset.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- The connect to computer and try to restore via iTunes.
- Id something is still showing onthe screen, disconnect from computer/charging source and let the battery fully drain. After charging for an hour, Try the reset and restore.
- If you can turn the iPod off, se if placing the iPod in recovery mode and then restore. For recovey mode:
iPhone and iPod touch: Unable to update or restore

Need Help Fast! Page is dispalying twice in quiz

I have created a quiz using tips from another post in this
forum. I insterted a regular slide with a continue button before
the quiz questions. I insterted another regular slide at the end of
the questions with a re-take button that points to that first
slide. This part is working great. When I take the published quiz,
I click the continue button, and instead of continuing, the slide
redisplays. I click the button again, and it moves forward like
it's supposed to. Any advice?
I'm supposed to have these posted in our LMS today for
testing, so I need help fast!!! Thanks!!

What you're seeing is likely the result of a MS patch for IE
in response
to the Eolas patent suit.
MS recently updated IE so any content shown in a page using
the Embed,
Object, or Script tags will need to be 'activated' before
they can be
clicked (or otherwise 'interacted with').
Your home computer probably hasn't had the latest security
rollup
installed, is why you're not seeing the issue on that
machine.
There is a work around, many site mention it. This may be a
good place
to start:
http://www.macromedia.com/devnet/activecontent/articles/devletter.html
Erik
dukekelly wrote:
> Why is it that as soon as you ask for help, you find the
answer?
>
> This isn't a captivate problem at all. It's an IE
problem. Because the button
> is a control in Flash, our systems where I work are
requiring us to click the
> screen to activate the controls. THEN you have to click
the button. When I play
> the movie on my home computer, this phenomenon isn't
happening. Now, how am I
> supposed to deal with that??? ASRRGGGHH!!!
>
Erik Lord
http://www.capemedia.net
Adobe Community Expert - Authorware
http://www.macromedia.com/support/forums/team_macromedia/
http://www.awaretips.net -
samples, tips, products, faqs, and links!
*Search the A'ware newsgroup archives*
http://groups.google.com/groups?q=macromedia.authorware

I am trying to export a video as an flv but the list of possible formats is much shorter than it used to be. I cannot find any way to make an FLV using the newest version of Premiere Pro. Need help fast! I am on a Mac

I am trying to export a video as an flv but the list of possible formats is much shorter than it used to be. I cannot find any way to make an FLV using the newest version of Premiere Pro. Need help fast! I am on a Mac

Support for exporting to FLV and F4V has been removed. To learn more, please consult this blog post: removal of FLV and F4V export features from Adobe Media Encoder, After Effects, and Premiere Pro | After Effects regio…

My screen is completely white, i've tried holding lock and home buttons as seen on you tube something called 'white screen of death' its goes black (think it switches off) then back to the white screen need help fast please!

my screen is completely white, i've tried holding lock and home buttons as seen on you tube something called 'white screen of death' its goes black (think it switches off) then back to the white screen need help fast please!

If you have not done a factory reset on the device, I recommend doing a complete factory reset.
Factory Reset - Warning this will reset device back to original factory settings.
This method will not erase any MDN/MIN information
Turn off the phone
Press Power + Volume Up/Down at the same time and hold until display will show a triage android screen
Display will show:
Reboot system Now
Apply sdcard:update.zip
Wipe Data/Factory Reset
Wipe Cache Partition
Use VOL Down key to scroll down to "Wipe Data/Factory Reset", press home icon to select option and wipe device.
Display shows "All user data will be wiped out", press VOLUME Up to continue or VOLUME Down to exit.
Press Volume Up
Press Home to select "Reset System Now" - device will reboot
If the problem persist I recommend having a store technician take a look at the device.
Copy and paste the link below into your browser's address bar for the store locator.
http://www.verizonwireless.com/b2c/storelocator/index.jsp

Premiere Pro CC updated - crashes almost immediately on my mac OS X Yosemite 10.10.3. Crashes at startup, crashes with media import, crashes when creating a sequence. NEED HELP FAST I have tried many troubleshooting solutions I found online nothing has

Premiere Pro CC updated - crashes almost immediately on my mac OS X Yosemite 10.10.3. Crashes at startup, crashes with media import, crashes when creating a sequence. NEED HELP FAST> I have tried many troubleshooting solutions I found online nothing has worked.

Hi,
Sorry to hear about the experience. Please provide your computer configuration details.
Memory, Processor, Graphics card, Exact version of Premiere Pro, Error message that you are get. If you can post screenshots of the error report that would be helpful.
Thanks,
Rameez

Need help fast, project due in Three days...

Similar Messages

Maybe you are looking for