Need help finding a BIOS flash tool and BIOS updates for HP Compaq nc8230 running Windows 7

I put together this laptop. It didnt come with a hardrive, and basically I installed everything from the ground up.
It is an HP Compaq nc8230, IDE Hard drive, Windows 7 32 bit. The BIOS on it is the original one. I've searched far and wide, but to no avail, it seems there's zero support for this model anymore.
      Basically it was never intended to go beyond Vista, back in 2004 when this model was introduced.
   The reason I am searching for some kind of BIOS update, whether it is BIOS or SMBios is to get the ACPI driver to recognize the primary laptop battery. This is crucial: it only sees both as the travel battery. Other than that, all else is fine.

Hi:
Here is the latest BIOS update for your notebook.
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32...
You cannot use the windows based flash because you installed windows 7, so I provided the link to the DOS based flash.
You need to use a USB floppy drive for this update.
Oh, and the card reader won't work unless you install this updated driver which is not on your PC's support and driver page.
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32...
Also, here is the link to your PC's support and driver page...
http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&prodTypeId=321957&prodSeries...

Similar Messages

  • Need help in query to display lot and serial numbers for a Wip Job Component

    Hi ALL,
    I have a requirement as below.
    I need to display lot and serial numbers for a Wip Job Component, i have a xml report in that for each wip job component i need to check whether it is a lot control item or serial control item based on that i need to display some data. so can you please help me to get the query to indentify the lot and serial number for a wip job component.
    Thanks

    Thank you for replying Gordon.  I did not remember I had asked this before.  I no longer have access to the other account. 
    What I need on the query is that I want  a list of items with the on order quantity and when we are expecting this order to be received.  The receiving date is based on the PO delivery date.  The trick here is that  I need to Master sku to show the delivery date of the component sku.  In my scenario all components have the same delivery date for the Master sku.  If there are mulitple delivery dates because each warehouse is getting them on a different date then I want to get the delivery date for that warehouse.
    Let me know if this is possible and if yes please guide towards a query for it.
    Thank you.

  • I need help finding a replacement hard drive/IR sensor cable for my laptop.

    I have a 17" Macbook Pro from September 2009, and the hard drive cable has ripped at the junction where the hard drive cable and the IR sensor cable meet.
    My brother needed to use my comp to try to transfer stuff from the hard drive from his broken laptop to an external hard drive, and the cable ripped the second time he was fiddling with it.
    Here are some pics:
    http://i48.tinypic.com/2qmgjgx.jpg
    http://i48.tinypic.com/2i1gq5v.jpg
    http://i49.tinypic.com/wqx838.jpg
    http://i48.tinypic.com/f03xbb.jpg
    http://i48.tinypic.com/23r0j5t.jpg
    http://i47.tinypic.com/f4r6gh.jpg
    When searching for "macbook pro unibody 2009 17" hard drive/ir sensor cable" it doesn't come up with any for the 17" but it comes up with a bunch for 13" and 15" and it seems like the 15" ones would work for my computer.
    (Like the one in the picture on this page: http://www.ifixit.com/Guide/Installing+MacBook+Pro+15-Inch+Unibody+2.53+GHz+Mid+ 2009+Hard+Drive-IR+Sensor+Cable/1520/1)
    I'm having no success finding a cable that looks just like the one in my comp that's specifically for the 17" that goes to the hard drive AND the IR sensor. For example, all I've been able to find so far are things like this:
    http://www.ifixit.com/MacBook-Parts/MacBook-Pro-17-Inch-Unibody-Hard-Drive-Cable /IF162-015
    which does not appear to be the cable I need, as it doesn't seem as though I could attach the IR sensor cable to it.
    Any and all help would be greatly appreciated.
    ~Cass
    [I don't remember the exact OS I was at, but I'm pretty sure it's 10.6.something]

    The dv7 notebook Maintenence & Service guide has the information that you need. See the illustrated parts list for the part number.
    From the manual:
    Supports the following double hard drive
    configurations:
    ● 2 TB: (1 TB, 5400 rpm, 12.5 mm × 2)
    ● 1500 GB: (750 GB, 7200 rpm, 9.5 mm × 2)
    ● 1500 GB: (750 GB, 5400 rpm, 9.5 mm × 2)
    ● 1 TB: (500 GB, 5400 rpm, 9.5 mm × 2)
    Hard drive (2, 2.5-in, SATA, does not include bracket, connector cable, Mylar shield, or screws):
      1-TB, 5400-rpm, 12.7-mm 638974-001
    750-GB, 7200-rpm, 9.5-mm 633252-001
    750-GB, 5400-rpm, 9.5-mm 634250-001
    640-GB, 5400-rpm, 9.5-mm 603785-001
    500-GB, 7200-rpm, 9.5-mm 608218-001
    500-GB, 5400-rpm, 9.5-mm 634932-001
    320-GB, 7200-rpm, 9.5-mm 634862-001
    320-GB, 5400-rpm, 9.5-mm 622643-001
    Hard Drive Hardware Kit (not illustrated, includes bracket, connector cable, Mylar
    shield, and screws)             665597-001
    You can order the parts through the HP Parts Store online. You can save quite a bit of money by ordering the identical parts from another online vendor.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Need help finding folder to load a third party web gallery in bridge cs4 on windows 7

    I purchased a third party PayPal webgallery for cs4.  I do not know exactly where to put this on my windows 7 program folders.  On CS3 it used to go
    in program folder>plugins etc but with bridge, I can't find the folder where it should live.   Any clues please ??

    Isn't there a manual or description coming with that plugin?

  • I need help finding this hp hard drive for dv6521eo

    I need help finding this hp hard drive and memory  for dv6521eo

    Hi:
    You can purchase any SATA II 2.5" notebook hard drive up to 500 GB in size.
    Memory is PC2-6400.
    Paul

  • Need help finding Sound and Vibration Toolkit Example Files

    I need help finding some Sound and Vibration Toolkit Example Files?
    http://www.ni.com/white-paper/3779/en
    From this link you get:  getting_started_otb.llb
    The missing files are:
    OAT Truncate Time Indices.vi
    Speed profile.ctl
    oa_Config Time or RPM Segment.vi
    svl-Complex Datatype Default.vi
    Running Windows 7, LabVIEW 2011, 32bit
    Sound and Vibration Measurement Suite
    Sound and Vibration Toolkit
    Thanks,
    -SS
    Solved!
    Go to Solution.
    Attachments:
    License S and V.png ‏4 KB

    SS,
    You can find these files here:
    C:\Program Files (x86)\National Instruments\LabVIEW 2011\vi.lib\addons\Sound and Vibration\Order Analysis\Resample Order Tracking\SubVIs
    C:\Program Files (x86)\National Instruments\LabVIEW 2011\vi.lib\addons\Sound and Vibration\Order Analysis\Tach Process\SubVIs
    C:\Program Files (x86)\National Instruments\LabVIEW 2011\vi.lib\addons\Sound and Vibration\Order Analysis\Resample Order Tracking\SubVIs
    svl-Complex Datatype Default.vi changes to svc-Complex Datatype Default.vi
    C:\Program Files (x86)\National Instruments\LabVIEW 2011\vi.lib\addons\_NISVFA\_Shared subVIs\Common
    Make sure you are license activated, and you will have to dig through the *vi and relink a subvi.
    Then you should get a white arrow.
    -SS 

  • I need help finding photos just downloaded to Lightroom...they only show up in "previous downloads" and not in a folder in my pictures

    I need help finding phots just downloaded to lightroom...they only show up in "prevoious downloads" and not in a folder in my pictures.  what can I do to correct this?

    Also, please be aware that Lightroom is not a file browser like your operating system Finder or Explorer is. If the photos are not in the folder you expected them to be in, it is because you (accidentally) imported them into a different folder.

  • TS1424 i need help finding a purchase that somebody made on my cedit card without my knowledge to itunes and i want to file a claim

    i need help finding a purchase that somebody made on my cedit card without my knowledge titunes and i want to file a claim

    You can view purchases via Store > View My Account on your computer's iTunes (and you can view subscriptions). If you want to contact iTunes support then you can do so via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • How do I preserve the embedded hyperlinks when printing to .pdf?   I am using Acrobat Pro XI for Mac, and when I export to .pdf the existing hyperlinks lose functionality.   I assume it's just the flick of the right button – I just need help finding that

    How do I preserve the embedded hyperlinks when printing to .pdf? 
    I am using Acrobat Pro XI for Mac, and when I export to .pdf the existing hyperlinks lose functionality.   I assume it’s just the flick of the right button – I just need help finding that button. 
    Can you help?  Thanks!

    How:  MS Word to .pdf by Command P, hitting the PDF button, and then the button for "save as Adobe pdf"
    I didn't have this problem at all on prior versions of Adobe on my PC.   This isn't a Mac attack, is it?

  • User guide: MSI HQ USB BIOS Flash Tool

    Guide based on USB tool v1.17c
    HOW TO properly use the MSI Forum HQ USB Flashing Tool to update your BIOS
    This user guide provides a step-by-step explanation for properly using the >>MSI Forum HQ USB Flashing Tool<< to prepare a USB Flash Drive for a safe BIOS-Flash in a pure DOS Environment. The tool itself will not perform the actual flashing operation.  It will "only" help you to get your USB Stick set up for an automated DOS flashing procedure which requires final confirmation.  (If you should run into any problems before you are prompted for final confirmation in DOS, no attempt to flash has been made yet and there is no danger of a bad flash.)
    NOTE: If you are having problems getting your USB device to boot correctly, you may need to format it correctly as the geometry data may be incorrect. You can do that by pickup option "Fix My USB key" from the Tool or by using >>> THIS <<< tool here! For future usage you can skip this step, it need to be done only once if your stick need adjustment.
    Symptoms that your USB key need a fix after booting from the USB key:
    * Error: "No bootable partition in table"
    * Blinking cursor in a top left corner and nothing happens
    * "RIVER2 MSI"
    * "Error loading operating system"
    * "Missing operating system"
    * "Disk in drive is not a bootable"
    * Booting from selected USB key is IGNORED, the other/typical OS continue to load as usual
    If still no change after using "Fix My USB key" Tool's option or HP Formatter Tool as alternative.
    Then try with different USB key, the issue is there.
    Note: Those USB keys who support "U3 Smart", this "feature" must be removed before proceed.
    Refer to followed link: http://u3.sandisk.com/launchpadremoval.htm
    Read the three notes that follow first before you move on:
    1. Note: Before you even think about flashing a different BIOS, be sure that your system is stable. If it is not stable, make it stable first. (Read >>here<<.)
    2. Note: Make sure your system meets the preconditions and system requirements mentioned below before you attempt to use the tool.
    3. Note: Do know that flashing your BIOS, be it with the help of the tool or otherwise, is done at your own risk.
    Contents of the Guide:
    0. Preconditions & System Requirements
    1. Basic Description of Functionality
    2. Installing/Starting the tool.
    3. Choosing a Preparation Method
      3.1. Method 1: Processing a BIOS Archive Directly (ZIP/RAR)
      3.2. Method 2: Processing a BIOS File Directly
      3.3. Method 3: SureHands Live Update
      3.4. Method 4: Geometry Change
    4. Selecting the USB Flash Drive for preparation
    5. BIOS Settings, Booting & Flashing
      5.1. BIOS Settings to Check
      5.2. Booting from USB Flash Drive
      5.3. Flashing Procedure/Running MemTest86+ & CMOS-Clear
    6. FAQ: Common Problems & Solutions
    7. Version History
    0. Preconditions & System Requirements
    The main precondition for using the tool is a working & healthy Windows installation on the system that needs the BIOS flash.  The Tool is designed to work with MSI Retail Boards & Laptops only.
    Please note mainboards of other brands and OEM boards that are manufactured by MSI but sold by Medion, HP, NEC and others are not supported. If you have an OEM board that needs a BIOS update read this topic: >>OEM boards manufactured by MSI<<
    Supported Operating Systems: All current Windows Versions (32bit & 64bit, any service pack (SP)): Windows NT, Windows 2000, Windows 2003, Windows XP, Windows Vista, and Windows 7.
    The second requirement is that you have a fully functional USB Flash Drive that uses the FAT file system (FAT/FAT32).  NTFS is not supported. If your USB Flash Drive is using the NTFS File System, reformat it to FAT or FAT32.
    As the tool also provides a Live Update Option ("SureHands"), you'll need a working internet connection if you want to choose this method. Not all boards are supported at this point.*
    * Check section 3.3 of this guide to see if your board is currently supported by the SureHands feature.
    1. Basic Description of Functionality
    The MSI Forum HQ USB Flashing Tool will help you to easily prepare an USB flash drive for an automated BIOS flash in a pure DOS environment, which is the safest way to perform such a procedure. The tool will also allow you to run MemTest86+ in a pure DOS environment. However, the preparation of your USB Stick is done in Windows and basically includes two steps:
    (1) The device will be made bootable.
    (2) All necessary files (incl. BIOS file, actual flasher and MemTest86+ executable) and all DOS commands that are needed to flash/test memory will automatically be implemented.
    Because the tool does not reformat your USB Flash Drive*, no files that may currently be on the stick will be lost during the procedure.  Just make sure that there is still some free drive space, otherwise there will not be enough room for the files that are needed for BIOS Flashing.
    * Excluding the Geometry Change method which will destroy all data on the USB storage device.
    2. Installing/Starting the tool
    Treat the forum's USB Flashing Tool like a regular application.  Download it to and run it from your hard drive, there is no need to copy & start it from the USB Flash Drive that you want to use for flashing.  Both, the installer version and the stand-alone version, do precisely the same job.  Which of the two versions you use, is solely up to you and your preferences.  The stand-alone version can be started directly by clicking on the executable file.  The installer version will perform an installation and provide you with an entry in your start menu and a desktop shortcut to start the tool.
    When you start the tool a DOS box should open up to provide you with status messages and prompts.  Do not close that box unless you want to abort the preparation procedure!
    Please ensure that you connect the USB flash drive you wish to use before starting the Tool!
    NOTE: If you do not connect your USB storage device before starting the tool, or the tool doesn't detect it. You can still insert the drive letter, as the tool will continue as normal.
    The tool will first check, if an MSI mainboard is installed in your system and show you its model name and PCB Version in a message box. Click >OK< to continue to choose the tool's preparation method that you want to use to prepare your USB Flash Drive.
    3. Choosing a Preparation Method
    If your MSI Retail Board is properly detected and you have pressed the >OK< button in the message box, an option box will pop up that allows you to choose between three different operating modes.  The options you can choose from are more or less self-explanatory, however, read the detailed description if you are unsure how to proceed at this point:
    3.1. Method 1: Processing a BIOS Archive Directly (ZIP/RAR)
    Official MSI BIOS-Updates that can be downloaded from the product site of your board model do usually come as .ZIP or .RAR archives that contain the actual BIOS File and the corresponding AWARD or AMI flashing utility (depending on the BIOS Type of your board).  If you have downloaded such an archive, you should choose the first method from the option box. 
    You do not need to extract the files from the BIOS archive.  The tool will ask you to point it to the archive you downloaded and automatically extract the BIOS File and the AMI or AWARD flashing utility and put it them on your USB Flash Drive.  You don't have to worry about anything else.  All you have to do is to remember where you saved the ZIP or RAR file you downloaded:
    3.2. Method 2: Processing a BIOS File Directly
    If you do not have a ZIP or RAR archive that already contains a BIOS File and the proper flashing utitility, but only the plain unpacked BIOS File, choose the second Method from the option box.  In most cases BETA BIOS Files supplied by MSI Support or shared here in the Forum do not come with the proper flashing utility.  If the MSI Forum HQ USB Flashing Tool is told to process a plain BIOS File, it will automatically check the type of BIOS File (AMI or AWARD) and then select the proper flashing utility that needs to be used.  All you need to do is point the tool to the BIOS-File that is supposed to be flashed:
    3.3. Method 3: SureHands Live Update
    "SureHands Live Update" is the third operation method you can choose from the option box.  It provides a much safer and more reliable alternative to MSI Live Update as the actual BIOS Flash is performed in a pure DOS environment as well.  If you decide to use this option, you do not to supply the tool with a BIOS-Archive or a BIOS-File.
    Not all MSI Retail Boards are currently supported.  With every update of the USB Flashing Tool more boards will be added.  At present, you can use the "SureHands" Live Update method with the following boards only (the list will be updated regularly):
    AMD based boards:
    K8N Neo4-F (MS-7125, PCB 3.0)
    K8NGM2-FID (MS-7207, PCB 2.0)
    K8N Diamond Plus (MS-7220, PCB 1.0)
    K8N Neo3 (MS-7135, PCB 1.0 & 2.0)
    K9A Platinum (MS-7280, PCB 1.0)
    K9A2 Platinum (MS-7376, PCB 1.0)
    K9A2 CF-F (MS-7388, PCB 1.0)
    K9N Neo-F (MS-7260, PCB 1.0 & 2.0)
    K9VGM-V (MS-7253, PCB1.0)
    K9N2GM-F V2 (MS-7509, PCB 1.0)
    K9N Neo V2 / V3 (MS-7369, PCB 1.1)
    K9N Platinum & K9N SLI Platinum (MS-7250, PCB1.0)
    K9N2 Diamond (MS-7375, PCB 1.1)
    K9N2 SLI Platinum (MS-7374, PCB 1.1)
    K9N2 Zilent (MS-7374, PCB 1.1)
    K9N2 Neo-F (MS-7511, PCB 1.1)
    DKA790GX Platinum (MS-7550, PCB 1.1)
    790FX-GD70 (MS-7577, PCB 1.0)
    790GX-G65 (MS-7576, PCB 1.0)
    Intel based boards
    HydroGenX48C & X48C Platinum (MS-7353, PCB 3.0)
    X48 Platinum (MS-7353, PCB 1.0)
    X38 Diamond Plus
    X38 Diamond (MS-7353, PCB 1.0)
    X38 Platinum (MS-7353, PCB 1.0)
    EFINITY-FP (MS-7395(E), PCB 1.0)
    P35 Neo Combo-F (MS-7365, PCB 1.0)
    P35 Neo2 Series (MS-7345, PCB 1.1)
    P35 Platinum (MS-7345, PCB 1.1)
    P35 Neo-F (MS-7360, PCB 1.0)
    G33 Platinum (MS-7345, PCB 1.1 & PCB 1.2)
    P965 Platinum (MS-7238, PCB 1.1)
    975X Platinum PowerUp Edition (MS-7246, PCB 2.1)
    865PE Neo2-P Platinum Edition (MS-6728, PCB 2.0C)
    P7N SLI Platinum (MS-7380, PCB 1.0)
    P7N2 Diamond (MS-7523 PCB 1.0)
    P7N Diamond (MS-7510, PCB 1.0)
    P7N SLI Platinum (MS-7380, PCB 1.0)
    P6N Diamond (MS-7320, PCB 1.0)
    P6N SLI Platinum (MS-7350, PCB 1.0)
    P6N SLI-FI (MS-7350 PCB 2.0)
    P6N SLI V2 (MS-7346 PCB 1.0)
    ECLIPSE SLI (MS-7520, PCB 1.0)
    ECLIPSE Plus (MS-7566, PCB 1.0)
    P35 Neo3-F (MS-7395, PCB 1.0)
    After selecting "SureHands" from the option box, the tool will automatically check for all available official BIOS-Versions for your mainboard.  It will also look for the latest available BETA BIOS Version for you board and save that information in a TXT-File on your Desktop:
    Note: The SureHands option will not provide you with the latest BETA BIOS, it will only provide the information.
    When the tool is done scanning for official BIOS releases for your board, it will give you the possibility to manually choose the BIOS Version you want to flash.  SureHands Live Update will not automatically select the latest version and use it for flashing, it will give you the chance of choosing between all available official BIOS releases that are available:
    Note that the "May not exist" comment that appears behind some versions does not mean that the BIOS does not exist.  If you know the latest BIOS for your board is e.g. v1.8, SureHands will retrieve it even though there may be such a comment.  That message is part of a prediction feature that tries to determine future BIOS Releases.  If a BIOS version that was predicted by the SureHands feature is not available yet, the tool will tell you if it cannot retrieve the files and ask you to select an earlier version.
    3.4 Geometry Change
    If the tool fails to make your USB storage device bootable then you will need to use this mode. It will make your drive bootable, select it:
    Select your drive then let the tool do it's business.
    Once the process is complete, run the tool again via method 1, 2 or 3, restart your computer and try booting from the USB storage device again.
    NOTE: This method will destroy ALL data on the USB storage device!
    NOTE: This method is available in v1.17 and beyond.
    4. Selecting the USB Flash Drive for preparation
    When you have chosen one of the three methods from the option list and pointed the tool at the corresponding archive, BIOS File or selected the desired BIOS Version from the list in case you chose to use SureHands Live Update, the MSI Forum HQ USB Flashing Tool will prompt you to enter the drive letter of the USB Flash Drive you want to use for flashing:
    Note that certain drive letters are reserved and will therefore not be accepted by the tool (currently A:, B: and C:). If you are sure you have connected an USB Flash Drive to the system that works properly but it does not appear in the table that appears in the DOS box, enter the corresponding drive letter anyway and see if the tool accepts it.  This can happen in rare cases, but it is usually no problem.
    The tool will check the selected drive and will provide you with status messages.  If everything is okay, the message should look like this:
    The tool will attempt to make the device bootable and automatically write all files that are needed for flashing to the drive to prepare it for flashing.  If the procedure was successful, you will get the following message in the DOS box:
    5. BIOS-Settings, Booting & Flashing
    If the Tool has prepared your drive for booting & flashing, no BIOS flash attempt has been made yet. Only the preparation process. In order to initiate the flashing procedure, you have to restart your system and make it boot from the USB Flash drive. Before you move on to do that, enter the BIOS Setup and check a few options:
    5.1. BIOS Settings to Check
    Check USB-related Options in BIOS:
    - USB Controller
    - USB 2.0 Controller
    - USB Legacy Support
    - USB Storage Support
    - Boot from other devices
    - etc.
    Not all of these options may be found in BIOS and the precise name may vary as well.  Just make sure you checked for such options and that they are enabled (if present).
    Another option you should check for is "Boot Sector Protection".  If such an option is present in your BIOS, make sure it is disabled because it may make a BIOS Flash impossible.
    @all Overclockers: In case your system is currently overclocked, make sure you roll back to default clock and voltage settings before you attempt to start the flashing procedure. Otherwise you increase the risk of an unsuccesful flash, and you most probably don't want something like that to happen.
    5.2. Booting from USB Flash Drive
    To boot from your USB drive you can either change the boot sequence in BIOS accordingly or just press F11 during POST* to get access to the BIOS Boot Menu.  From here, you can select you drive directly without having to adjust the boot sequence in BIOS.  Note that your USB Flash Drive may be listed as a hard drive (if you choose that entry you will get another list to choose from).
    * Not all mainboards use F11, for the boot menu. If F11 fails for you, please consult your manual for the correct key.
    Note: If you have problems booting from your drive, look at the FAQ-Section of this guide and see if any of the tips resolve the issue.
    5.3. Flashing Procedure/Running MemTest86+
    As soon as the system boots from the drive, DOS will be loaded and you will be displayed with two options. One option will start MemTest86+, the other will begin the flashing procedure. If no choice is made, MemTest86+ will automatically start.
    The flashing procedure will automatically be initiated from there.  You will see status messages on the screen that will supply you with information and also prompt you for final confirmation for the actual BIOS-Flash.  A backup of you current BIOS will automatically be saved to a file on the drive (backup.bin) before the flashing actually starts.  You do not need to enter any commands in DOS.  All you have to do is acknowledge the information on the screen by pressing a key.
    The flash itself will only take a couple of seconds (20-30s at the most).  If the flashing is successfully completed, shutdown the system and clear CMOS with main A/C power cable removed from PSU.  Read the >>Clear CMOS Guide<< for further information. 
    After clearing CMOS you have completed the BIOS-Flash. 
    Guide created by Jack The Newbie and the forum team

    Version updated to 1.18x:
    * Mode 3 Sure Hands, Live Update:
    - Removed beta BIOS query check[global]
    - Fixed issue K9N2 Diamond unable to be detected as supported unit if onboard is installed BIOS version 2.4,
     add dynamic detection for future versions.
    - Fixed issue 790FX-GD70 unable to be detected as supported unit and add dynamic detection for future versions.
    - Fixed issue 790GX-G65 unable to be detected as supported unit and add dynamic detection for future versions.
    - Add support for 785G-E65, add dynamic detection for future versions, prediction BIOS range 3.1 - 3.A
    - Add support for 785G-E53, add dynamic detection for future versions, prediction BIOS range 3.1 - 3.A
    - Add support for 790GX-G65 Winki ED, prediction BIOS range 2.1 - 2.A
    - Fixed issue P7N Diamond unable to be detected as supported unit if onboard BIOS installed is 1.3 and above,
     add dynamic detection for future versions.
    - Add support for K9A2 Neo2, prediction BIOS range 7.4 - 7.D
    - Add support for 790XT-G45, prediction BIOS range 2.2 - 2.B
    - Add support for 770T-C45, prediction BIOS range 8.4 - 8.D
    - Add support for 770T-C35, prediction BIOS range 8.4 - 8.D
    - Fixed issue K9A2 Platinum[V1,V2] unable to be detected as supported unit if onboard BIOS installed is 1.9,
     add dynamic detection for future versions, prediction BIOS range extended to 1.F0
    - 790GX-G65 board prediction BIOS range extended to ver: 1.D0
    - 790GX-G65 board update bios base ver from 1.xx to 4.xx [following new msi rule for this board jumping from 1.xx to 4.xx]
    - Add support for 770-C35|C45 boards [p1] BIOS range 1.40 - 1.D0
    - Add support for 770-G45 board [p2] BIOS range A10 - AA0
    * Add "Exit" option to navigation screen
    * Update version info related to boot part
    * Update boot part to handle newest features
    * Modify Self update sequence of Installer version
    * Update internal version check ID
    * Mode 4 minor update
    * Build and add new Tool's module for newest features
    * W32 Tool's exit time part decreased by 10 seconds
    * On received OS reboot user request, time delay before execution decreased by 15 seconds
    * Update EC decoder
    * Update start-up information screen
    * Auto store start-up detected information to user's desktop ==> [MSIHQ_INFO.TXT]
    Details:
    Easy to show machine information on request, instead write down from the screen manually, now just copy/paste can be used from MSIHQ_INFO.TXT
    User can check and compare information before and after the BIOS update
    Also usefull if didn't remember what was his original BIOS or EC versions before the update, Tool will auto store it there.
    And easy can be checked if needs. E.g Tool's log file of each Tool's execution, each report will include date and time as well.
    F.A.Q example:
    Q: I flashed BIOS on my notebook and now it doesn't work properly.. And i don't remember what was my old BIOS version.. What can i do?
    A: Take a look in MSIHQ_INFO.TXT at your desktop, there is auto recorded your detailed information about your notebook before the BIOS update.
    So you can easy find what was your original BIOS & EC versions.
    Is it OEM one or not, and the exact original BIOS & EC versions.
    So you can roll back easy or if crossflashing were done to reflash to correct versions.
    Example question:[this board now use 4.xx bios, but don't have time to make a new images.]
    It's just example, do not mean that this BIOS used in the example is bad. But generally often can need to roll back to older version.
    Or to use Sure Hands because[The BIOS is N/A for manual download, By SureHands no need to browse/search/download and point to the BIOS version, also eliminate any chances to pickup the wrong BIOS, and not at last its more quickly[save a time]]
    Q: I flashed my BIOS via MSI Live Update, but the new BIOS has an issues.
        How i can roll back to my old BIOS version?
        The MSI LiveUpdate can only update to the latest BIOS version, which is not good for me.
        And i can't download my old BIOS version manually... Because "This BIOS can only update via Live Update function"
        http://eu.msi.com/index.php?func=downloaddetail&type=bios&maincat_no=1&prod_no=1739
        How i can re-flash to my original BIOS version and from where can i get it?
    A: Run >>Use the MSI HQ Forum USB flasher<<,
    then choose Mode 3 [Live Update{aka SureHands}]:
    MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
    MSIHQ: Report generated in ба 30.12.2009 Ј. at 21:09:45,15
    Mainboard:  790GX-G65 (MS-7576)       
    PCB Version:  1.0
    BIOS Version: V1.3
    BIOS Date:  05/08/2009
    MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
    MSIHQ: Report generated in ба 30.12.2009 Ј. at 21:22:38,42
    Mainboard:  790GX-G65 (MS-7576)       
    PCB Version:  1.0
    BIOS Version: V1.6
    BIOS Date:  11/30/2009
    Then choose your old BIOS version from the list:
    The followed image used below is a sample from Eclipse board,[no time to make accurate image] but will look similar for others boards too:
    In a list will be noticed that there is a future BIOS versions.
    Some of them will be not released yet. If you pick some of those the Tool will note you:
    It's a part of Tool's BIOS prediction system called "Crystal Ball", when MSI release a future BIOSes for your board,
    Tool can find them immediately. By that way the Tool no need to be updated to be actual in each moment
    * Add new feature "True BIOS Version Ready"
    - Updated Mode 1
    - Updated Mode 2
    - Updated Mode 3
    Details:
    Q: What "True BIOS Version Ready" means? Does the Tool show the wrong BIOS version until now? 
    A: Of course not, the Tool always show accurate info.
    The same as CPU-Z/Everest of whatever other Tool.
    However Tool also detect EC-FW versions for notebooks:
    The "True BIOS Version Ready" Tool's feature is aimed to eliminate user's mass confusion about MSI BIOS versions.
    And not only users are confused, but MSI's Live Update is confused too... which confuse users even more..
    Few typical real examples of confusion:
    "K9A2 CF wont flash to Bios v. 1.A !!!" 
    Quote from: Fingon on 25-October-09, 16:53:15
    Hi MSI,
    I have a problem. I have bought a new processor: AMD Phenom II x545. I looked on the support page of my MB (MSI K9A2 CF) and there the CPU is supported from the bios version 1.A. So I wanted to flash the Bios the the newest version (1.A). I used the MSI live update 4 program to flash it via windows mode. But everytime it boots it writes "CMOS checksum BAD", then I hit F1 to Bios and I see the version of my BIOS fell to the oldest version 1.1. Then I tried to flash it thru Flash disc (with boot files) and dos mod. The result is the same. I can flash my MB to version 1.8 but when I try the 1.A it wont flash it and my Bios fell to the oldest version (1.1). I realised that the exe files in version 1.1-1.8 are the same (afud412.exe) but the exe file in 1.A is different (afud4310.exe).
    My questions are:
    1) How to flash my MB to the version 1.A ?
    2) Is version 1.A really needed for AMD Phenom II x545? I guess yes, because CPU was avaible in July 2009 and the bios 1.A went out in June 2009. I am able to flash it only to version 1.8 (december 2008).
    Thank you for any help!!
    EDIT: After reading this topic: https://forum-en.msi.com/index.php?topic=129204.0 I realised I have the VERSION 1 of this board (I purchased it right after the launch of the MB (November 2007). It means it doesnt support CPU over 95W, but my Phenpom II x545 has only 80W. I still cant update Bios to the 1.A version.
    So my third question is:
    3) Is the Bios update 1.A only for version 2 of this MB?
    Thx for replies!
    Quote from: Jack t.N. on 25-October-09, 17:16:16
    A CMOS Checksum error is normal and expected after a BIOS Flash and/or a CMOS Clear.  The fact that this message appears, shows, that there was actually something programmed to the chip.
    If you haven't done that yet, please clear CMOS with the main A/C power cable removed from your PSU and load "Optimized Defaults" in BIOS Setup.
    The BIOS Version should be shown on the POST Status Screen and there should be a date behind it.  Please check the BIOS Date and write it down:
    Are you absolutely and entirely sure that what you see is "1.1" and not "1.10"?  Because v1.A0 is actually just the hexadecimal notation for v1."10" (one dot ten).  The hexadecimal notation is only used in the BIOS File Ending.  Once flashed, the BIOS will not identify itself in hexadecimal notation but in decimal code (which means you will never see "v1.A0" after the flash but "v1.10" instead.
    Here is a piece of well-meant advice for now and the future:  MSI Live Update should be avoided under all circumstances when it comes to BIOS Updates and/or information retrieval regarding your current BIOS Version.  Why?  Because this tool is stupid and one of there most risky applications for performing a BIOS Flash.  Please uninstall it completely.
    Why do I call it stupid?  I call it stupid because it does not differentiate between hexadecimal notation and decimal notation.  It will show you that "v1.A0" is available.  The it will flash it, if you allow it to do so.  Of course, a v1.A0 Version will always come out as "v1.10" (one dot ten).  When you re-run MSI Live Update it will not recognize that v1.A0=v1.10 and tell you again that there is a newer version available (1.A0, which, again, is the same as v1.10, which was just properly flashed).
    I believe that the update went just fine, that you are currently using v1.A0=v1.10 and that MSI Live Update is actually just creating a pseudo-problem which is currently confusing you.  The pseudo-problem will immediately be out of the world, if you uninstall MSI Live Update and rely on the BIOS ID String as it appears on the POST Status Screen (this includes the date shown there).
    If a BIOS Update should ever be necessary again, please make sure that you won't use MSI Live Update but >>Use the MSI HQ Forum USB flasher<< instead.
    Quote from: Fingon on 25-October-09, 18:03:44
    Thank you for the quick reply!!
    Thats exactly what I have JUST found in this post by Svet: https://forum-en.msi.com/index.php?topic=127672.msg974800#msg974800
    Yes it is 1.10 of course!! I didnt know that 1.10 = 1.A0 ! Thank you for the reply. Then the MSI live update 4 program is dump that he wanted from me another update of Bios.
    So thank you! Problem is solved. 
    Edit: Yes, because of MSI live update I learned how to flash bios via flash disc. :-) But I was still confused by that 1.10 and of course by program saying me I should update again.. :-P
    Quote from: Lostsoul777 on 14-August-09, 05:46:25
    I had the same problem with 1.90 bios, so i updated to 1A, i just want to know why Bios Version says: v.1.10 instead v.1A?
    Quote from: LinuxGuy on 29-December-09, 01:17:45
    My computer does not have a floppy drive.  How do I update the BIOS?  (I tried the online utility 3 times.  It always updates the BIOS "successfully" and when I restart my PC, I have to do either F1 to config or F2 to load setup defaults.  So it looks like it's working, but the online update says that I have versions H.10 and version H.A0 is available (or maybe the other way around).  So either the BIOS is getting updated, but the online tool is not recognizing this or it's not getting updated.  Either way, I would like to manually flash it in DOS.  Is it safe to burn the setup files to CD and boot from CD into DOS?
    That's the same BIOS version... Just the "MSI Live Updater" is not very smart...
    H.A=H.10=17.A=17.10 [A=10, H=17], the last "0" suffix in H.A0 means its official version.
    Quote
    I tried the online utility 3 times.  It always updates the BIOS "successfully" and when I restart my PC, I have to do either F1 to config or F2 to load setup defaults.
    So it looks like it's working, but the online update says that I have versions H.10 and version H.A0 is available (or maybe the other way around).
    So ignore this MSI Live Updater's no sense, and stop flashing your BIOS. You already have the latest version installed.
    The Tool now will detect and shows BIOS versions alias when the MSI BIOS version is known with more than one name.
    So no more flashing and flashing and flashing to the same version because of MSI LiveUpdate suggest again BIOS update...
    Also no more confusion:
    "What's my BIOS version?" -> I flashed my BIOS to 1.A0 [A7520IMS.1A0], but BIOS says its 1.10
    And MSI Live Update also says that i have 1.10 and 1.A0 is available and i should update it. I flashed it again, but its still 1.10?
    What's going on?
    Just run the MSIHQ USB Flash Tool and will show you all that you need to know
    Examples[with real/accurate info]:
    MSI Eclipse:
    BIOS version 1.9:
    BIOS version 1.10:[Tool now shows both BIOS versions alias]
    Report stored respective in MSIHQ_INFO.TXT at user's desktop:
    MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
    MSIHQ: Report generated in ба 30.12.2009 Ј. at  5:30:55,34
    Mainboard:  Eclipse SLI (MS-7520)
    PCB Version:  1.0
    BIOS Version: V1.9
    BIOS Date:  09/22/2009
    MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
    MSIHQ: Report generated in ба 30.12.2009 Ј. at  5:37:25,66
    Mainboard:  Eclipse SLI (MS-7520)
    PCB Version:  1.0
    BIOS Version: V1.A (aka Version: V1.10)
    BIOS Date:  10/27/2009
    More examples =>K9N6SGM-V / K9N6PGM-FI / K9N6PGM-F :
    More examples =>945GCM5-F V2 (FSB 1333) :
    Report stored respective in MSIHQ_INFO.TXT at user's desktop:
    MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
    MSIHQ: Report generated in ба 30.12.2009 Ј. at  5:47:34,35
    Mainboard:  MS-7267
    PCB Version:  4.0
    BIOS Version: VH.9 (aka Version: V17.9)
    BIOS Date:  11/20/2008
    MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
    MSIHQ: Report generated in ба 30.12.2009 Ј. at  5:52:46,26
    Mainboard:  945GCM5-F V2  (MS-7267)
    PCB Version:  4.0
    BIOS Version: VH.A (aka Version: V17.10)
    BIOS Date:  06/02/2009
    More examples =>780GT-E63 [N/A at MSI web yet] :
    For MSI Notebooks such decoding isn't need, examples:
    * Add new feature "Triple BIOS flash Recovery Ready"
    - Updated Mode 1
    - Updated Mode 2
    - Updated Mode 3
    Details:
    The feature include 3 auto prepared BIOS backups for followed purpose:
    * Internal BIOS recovery:
     - In a failure case Tool perform auto flash recovery [3 attempts, check for success after each and stop flashing if successful] before give control to BK_IO2, notice users about results and give control for manual attempts[if need]. [This a case if system isn't lockup/reboot, if bad flash occur]
     - This mode also have own store up to 5 backups[+1, the last saved copy is always backup.bin, if there was older one they become backup1.bin .. till 5]
    * BIOS backup stored as AMIBOOT.ROM [AMI BIOS only] [Auto clean up older if there is any, before take a new backup to avoid recovery confusion]
    * BIOS backup detected and stored for M-Flash style boot/recovery [AMI BIOS only] [Auto clean up older if there is any, before take a new backup to avoid recovery confusion]
    Performing test simulations with random generated BIOS versions[including betas] for M-Flash boot/recovery style, some examples:
    Copy/paste Tool log file:
    MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
    MSIHQ: Report generated in 03.01.2010 г. at  7:00:53,46
    Mainboard:  945GCM5-F V2  (MS-7267)
    PCB Version:  4.0
    BIOS Version: VD.XB2 (aka Version: V13.33B2)
    BIOS Date:  06/02/2009
    Co-respond BIOS backup created  ==> A7267IMS.DX2 
    Where:
    * V13.33B2 ==> MSIHQ Tool detection [The same as CPU-Z, Everest]
    * VD.XB2 ==> MSIHQ Tool "True BIOS Ready" detection feature
    * A7267IMS.DX2 ==> MSIHQ Tool BIOS recovery created by "Triple BIOS flash recovery Ready", part M-flash boot/recovery [1/3]
    MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
    MSIHQ: Report generated in 03.01.2010 г. at  7:12:23,95
    Mainboard:  945GCM5-F V2  (MS-7267)
    PCB Version:  4.0
    BIOS Version: VK.VB7 (aka Version: V20.31B7)
    BIOS Date:  06/02/2009
    Co-respond BIOS backup created ==> A7267IMS.KV7 
    Where:
    * V20.31B7 ==> MSIHQ Tool detection [The same as CPU-Z, Everest]
    * VK.VB7 ==> MSIHQ Tool "True BIOS Ready" detection feature
    * A7267IMS.KV7 ==> MSIHQ Tool BIOS recovery created by "Triple BIOS flash recovery Ready", part M-flash boot/recovery [1/3]
    MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
    MSIHQ: Report generated in 03.01.2010 г. at  7:18:34,46
    Mainboard:  945GCM5-F V2  (MS-7267)
    PCB Version:  4.0
    BIOS Version: V3.9
    BIOS Date:  06/02/2009
    Co-respond BIOS backup created ==> A7267IMS.390 
    Where:
    * V3.9 ==> MSIHQ Tool detection [The same as CPU-Z, Everest]
    * MSIHQ Tool "True BIOS Ready" detection feature isn't need here, since this BIOS version can be known only with one name.
    * A7267IMS.390 ==> MSIHQ Tool BIOS recovery created by "Triple BIOS flash recovery Ready", part M-flash boot/recovery [1/3]
    MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
    MSIHQ: Report generated in 03.01.2010 г. at  7:22:24,04
    Mainboard:  945GCM5-F V2  (MS-7267)
    PCB Version:  4.0
    BIOS Version: V8.1B9
    BIOS Date:  06/02/2009
    Co-respond BIOS backup created ==> A7267IMS.819 
    Where:
    * V8.1B9==> MSIHQ Tool detection [The same as CPU-Z, Everest]
    * MSIHQ Tool "True BIOS Ready" detection feature isn't need here, since this BIOS version can be known only with one name.
    * A7267IMS.819  ==> MSIHQ Tool BIOS recovery created by "Triple BIOS flash recovery Ready", part M-flash boot/recovery [1/3]
    MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
    MSIHQ: Report generated in 03.01.2010 г. at  7:25:38,51
    Mainboard:  945GCM5-F V2  (MS-7267)
    PCB Version:  4.0
    BIOS Version: V4.E (aka Version: V4.14)
    BIOS Date:  06/02/2009
    Co-respond BIOS backup created ==> A7267IMS.4E0 
    Where:
    * V4.14 ==> MSIHQ Tool detection [The same as CPU-Z, Everest]
    * V4.E ==> MSIHQ Tool "True BIOS Ready" detection feature
    * A7267IMS.4E0 ==> MSIHQ Tool BIOS recovery created by "Triple BIOS flash recovery Ready", part M-flash boot/recovery [1/3]
    MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
    MSIHQ: Report generated in 03.01.2010 г. at  7:28:16,62
    Mainboard:  945GCM5-F V2  (MS-7267)
    PCB Version:  4.0
    BIOS Version: V1.BB1 (aka Version: V1.11B1)
    BIOS Date:  06/02/2009
    Co-respond BIOS backup created ==> A7267IMS.1B1 
    Where:
    * V1.11B1 ==> MSIHQ Tool detection [The same as CPU-Z, Everest]
    * V1.BB1 ==> MSIHQ Tool "True BIOS Ready" detection feature
    * A7267IMS.1B1 ==> MSIHQ Tool BIOS recovery created by "Triple BIOS flash recovery Ready", part M-flash boot/recovery [1/3]
    MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
    MSIHQ: Report generated in 03.01.2010 г. at  7:31:57,78
    Mainboard:  945GCM5-F V2  (MS-7267)
    PCB Version:  4.0
    BIOS Version: VI.FB5 (aka Version: V18.15B5)
    BIOS Date:  06/02/2009
    Co-respond BIOS backup created ==> A7267IMS.IF5 
    Where:
    * V18.15B5 ==> MSIHQ Tool detection [The same as CPU-Z, Everest]
    * VI.FB5 ==> MSIHQ Tool "True BIOS Ready" detection feature
    * A7267IMS.IF5 ==> MSIHQ Tool BIOS recovery created by "Triple BIOS flash recovery Ready", part M-flash boot/recovery [1/3]
    MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
    MSIHQ: Report generated in 03.01.2010 г. at  7:36:02,40
    Mainboard:  945GCM5-F V2  (MS-7267)
    PCB Version:  4.0
    BIOS Version: V7.O (aka Version: V7.24)
    BIOS Date:  06/02/2009
    Co-respond BIOS backup created ==> A7267IMS.7O0 
    Where:
    * V7.24 ==> MSIHQ Tool detection [The same as CPU-Z, Everest]
    * V7.O ==> MSIHQ Tool "True BIOS Ready" detection feature
    * A7267IMS.7O0 ==> MSIHQ Tool BIOS recovery created by "Triple BIOS flash recovery Ready", part M-flash boot/recovery [1/3]
    MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
    MSIHQ: Report generated in 03.01.2010 г. at  7:39:11,84
    Mainboard:  945GCM5-F V2  (MS-7267)
    PCB Version:  4.0
    BIOS Version: VC.8B6 (aka Version: V12.8B6)
    BIOS Date:  06/02/2009
    Co-respond BIOS backup created ==> A7267IMS.C86 
    Where:
    * V12.8B6 ==> MSIHQ Tool detection [The same as CPU-Z, Everest]
    * VC.8B6 ==> MSIHQ Tool "True BIOS Ready" detection feature
    * A7267IMS.C86 ==> MSIHQ Tool BIOS recovery created by "Triple BIOS flash recovery Ready", part M-flash boot/recovery [1/3]
    MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
    MSIHQ: Report generated in 03.01.2010 г. at  7:49:38,46
    Mainboard:  945GCM5-F V2  (MS-7267)
    PCB Version:  4.0
    BIOS Version: VG.PB6 (aka Version: V16.25B6)
    BIOS Date:  06/02/2009
    Co-respond BIOS backup created ==> A7267IMS.GP6 
    Where:
    * V16.25B6 ==> MSIHQ Tool detection [The same as CPU-Z, Everest]
    * VG.PB6 ==> MSIHQ Tool "True BIOS Ready" detection feature
    * A7267IMS.GP6 ==> MSIHQ Tool BIOS recovery created by "Triple BIOS flash recovery Ready", part M-flash boot/recovery [1/3]
    MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
    MSIHQ: Report generated in 03.01.2010 г. at  7:53:17,26
    Mainboard:  945GCM5-F V2  (MS-7267)
    PCB Version:  4.0
    BIOS Version: VU.H (aka Version: V30.17)
    BIOS Date:  06/02/2009
    Co-respond BIOS backup created ==> A7267IMS.UH0 
    Where:
    * V30.17 ==> MSIHQ Tool detection [The same as CPU-Z, Everest]
    * VU.H ==> MSIHQ Tool "True BIOS Ready" detection feature
    * A7267IMS.UH0 ==> MSIHQ Tool BIOS recovery created by "Triple BIOS flash recovery Ready", part M-flash boot/recovery [1/3]

  • MSIHQ BIOS flash tool problems

    I was unable to flash my BIOS using M-Flash so I thought I'd give the MSIHQ BIOS Flashing Tool a try. 
    After extracting the tool I gave it a try.  The first thing that happened was that the tool checked for the latest version and generated the MB Info file:
    MSIHQ: Information detected by MSIHQ Tool ver: 1.25g
    MSIHQ: Report generated in Mon 07/29/2013 at 14:41:27.01
    Mainboard:  Z87-G43 (MS-7816)
    PCB Version:  1.0
    BIOS Version: V1.1
    BIOS Date:  5/6/2013
    Next, I selected the "Fix My USB Key" tool.  I selected drive F: and agreed to the disclaimer about erasing the info on the drive.  When asked if I wanted to proceed, I answered "Y" and the repair program started.
    Next, I got an error  address $1C6
    The system cannot find the file specified"
    So, I retried the tool and after answering "Y" to start, there was a brief falsh of a message to the effect that "Drive Not Responding"
    I unplugged the flash drive and plugged it in again and Windows said that the drive was not formatted and asked if I would like to format it.  I answered yes and tried to format it in FAT (FAT 32 was not an option for some reason) and after attempting to quick format the drive, Windows returned a message that "Windows was unable to format the device".  Next I tried a full format but the result was the same.
    Where should I go from here?

    Quote from: flobelix on 31-July-13, 00:39:10
    The tool creates an own booting stick. Any Win98 files aren't required. After a stick was fixed with the tool and it is used to prepare a stick for flashing it adds all necessary itself. For flashing the beta always use Mode 1 not 2 of the tool. Directly point to the downloaded beta archive and don't decompress it. Basically follow the instructions in the beta section excatly.
    https://forum-en.msi.com/index.php?topic=170132.msg1244286#msg1244286
    Not true with Z87. Use mode 2 as xmad mentioned in his earlier reply. M-Flash on Z87 works as advertised. If there is an ME update involved, be sure to select BIOS + ME choice, and do not remove the USB stick before the self retart and ME flash is completed.

  • How do I change the size of the tools and the text for the menus in Photoshop?  I need a magnifying glass in order to make out what they are.

    How do I change the size of the tools and the text for the menus in Photoshop?  I need a magnifying glass in order to make out what they are.

    Okay, I've figured it out, so I'm going to answer my own question in hopes that it may help anyone else that would like to actually be able to see what they're doing when using Photoshop CC 2014 on a high resolution screen.
    1.  Open Photoshop.
    2.  Select Preferences from the Edit Menu, then select General.
    3.  Change the HUD Color Picker to Hue Strip (Medium).
    4.  Select Interface from the Preferences menu on the left side of the dialog box.
    5.  Change the UI Font Size to Large in the Text area of the Preferences dialog box.
    6.  Select Experimental Features from the Preferences menu on the left side of the dialog box.
    7.  Select Scale UI 200% for high-density displays (Windows only).
    8.  Click on OK, then Exit/Quit Photoshop.
    9.  Open Photoshop and everything should be readable.

  • I have tried everything I know to retrieve the iPhoto Library app.  I detest this new Photo app, which obviously wasn't designed with photographers in mind.  I desperately need help in retrieving the old app and have not been able to do it so far.

    I have tried everything I know to retrieve the iPhoto Library app.  I detest this new Photo app, which obviously wasn't designed with photographers in mind.  I desperately need help in retrieving the old app and have not been able to do it so far.  I have gone to my app folder and tried to update my iPhoto Library.  I have gone to my trash and brought it over to my desktop and still cannot use it.  Please help!

    Try this fix discovered by User photosb189:
    From Finder, hold down the option key on your keyboard and click on the Go menu at the top of the screen
    Select Library from the drop down menu
    Then navigate to Application Support > iLifeAssetManagement > assets
    Right click on the 'sub' folder and choose Compress
    Drag the resulting zip file to your Desktop (as a backup)
    Go to your System Preferences and choose iCloud
    Turn OFF the iCloud Photos option
    Go back to Library > Application Support and DELETE the iLifeAssetManagement folder
    Now, in System Preferences, turn the iCloud Photos option ON
    iPhoto should now be able to launch. Give it enough time to re-download your Photo Stream content. if you are missing any of your My Photo Stream photos (more than 30 days old), unzip the sub folder on your desktop and drag that into iPhoto.

  • I need help!!! Did my iOS 6 update today, thought it was fine!! Then my friend text me and instead of saying Siobhain it says voicemail text message!! I've tried deleting her and adding her again, turning phone off etc etc!! Please help!!

    I need help!!! Did my iOS 6 update today, thought it was fine!! Then my friend text me and instead of saying Siobhain it says voicemail text message!! I've tried deleting her and adding her again, turning phone off etc etc!! Please help!!

    I know of no way to remove encryption on iTunes backups if you've forgotton the password.  If you've used the 4 digit PIN code to lock your iPhone in the past that can sometimes default as your "password" for this encryption in iTunes.  Try that PIN or any PIN you've used in the past.  If you don't use a lock maybe you played around with that feature once when you first got your phone....try "1,2,3,4" or anything you could have possibly tried.
    As far as accessing older unencrypted backups you can try this software.  I do not have any experience using it but it seems like it's what you need and is probably the easiest route for both voicemail and texts:
    http://deciphertools.com/products.html
    If you want to try to find voicemails using Terminal, I found this link as well:
    http://mikereys.wordpress.com/2011/10/18/iphone-backup-restoring-visual-voice-ma il/
    I know with AT&T, voicemails are only stored on their servers for 30 days so any voicemail older than that you would not have been able to access again.
    Best of luck.

  • HT1349 I need help finding an old library that itunes states my ipod is already linked to

    I need help finding an old library that it states my ipod is already linked to.  My computer recently had a terrible virus and needed to be wiped clean.  I had to redownload itunes and I bought several songs.  I want to add them to my old library because I had several cd's that I had uploaded.  Is there a way to find that old library and combine them without having to erase all the songs that are currently on my ipod???  Thanks

    Umm.  If you wiped the hard drive, then all old libraries are gone unless you have them on backup.

Maybe you are looking for

  • Can my husband and I use the same e-mail address/AppleID for our 2 phones, our iMac, and our Macbook?

    Can my husband and I use the same e-mail address/AppleID for our 2 phones, our iMac, and our Macbook? We share an e-mail account and would like to use the same e-mail address for both our phones, as well as our computers at home. Is this possible? We

  • Network drives disapperared

    since upgrading to Yosemite 10.10 I have to re-map my network drives every morning can someone explain to me why this is happening.

  • Write to BMP or JPG file

    Can anyone tell me if there is a VI available that will write a graph display to a BMP if JPG file. This is to save having to [print screen] and edit the picture all the time. Yours sincerely, Chris McCrory Project Engineer __________________________

  • Trouble with Sleep

    My macbook won't come out of sleep properly -- if I put it to sleep and try to wake it up, it automatically causes the computer to pop on and then just shut down immediately, then I can't turn on the computer again without holding down the power butt

  • Error when deploy a deployable proxy

    Hi all     I'm using SP15.     I follow step by step the wizard to create a deployable proxy to implemente a client web services.     I select Local File System or URL, and I can import the wsdl file, build the project, but when I try to deploy.....