Need help finding external mixer and a/d audio interface

Hi there,
i just got my logic studio up and running. but i need an external 4-12 channel mixer to records my synths in. right now i have 2 external audio devices (Korg Electribe Emx1 and MicroKorg).
What is recommended? I want a goos sount but not too expensive.
Im looking for a small mixer, and an A/D device (like an Apogee Duet).
thanks
daryl

here are the  specifications  for Philips eXpanium eXp 2461 , if somone can help me find a boomboox with simular specifications it would very helpful
Philips eXpanium eXp 2461 - CD / MP3 player
CD System
CD system type CD / MP3 player
Media load type Top-load
Playback modes Repeat all,
Resume play,
One track repeat
CD system response bandwidth -19980.0 Hz
Signal-to-noise ratio 85.0 dB
CD shockproof memory 45 seconds
MP3 shockproof memory 100 seconds
CD-R compatible Yes
CD-RW compatible Yes
CD track programming Yes (50 tracks)
Digital audio standards supported MP3
Supported bit rate 32 - 320Kbps
General
Product type CD / MP3 player
Weight 8.0 oz
Carrying Case
Case type None
Built-in Display
Audio system built-in display LCD
Audio Features
Sound effects Digital Dynamic Bass Boost (Digital DBB)
Sound output mode Stereo
Additional features

Similar Messages

  • Need help finding a mixer

    This question may have been answered somewhere in this forum but I would like a solid answer that specificaly fits what i'm looking for. I'm looking to set up a recording studio at my school with the help of my teacher and the school's money. We are looking for a DIGITAL mixer that will take XLR inputs as well as 1/4" inputs and has 8 channels. The thing is I need this mixer to be able to plug into Garageband because I really don't want to spend the time and money learning to use Logic and still come out with a "newbie" result. In the end, I want a Firewire mixer that is actually compatable with Garageband and shows up in Garageband as 8 separate tracks that I can edit individualy after i record them. Also, i would like to have have the look and control of an actual mixing board. Idealy, the mixing board should be able to control Garageband as well, i.e. I turn up the volume on track 3 and in Garageband the volume meter for track 3 moves up as well. I know the board doesn't have to move up and down as i control through Garageband, but i want to be able to atleast control volume digitally. Anyone... help!
    Macbook Pro   Mac OS X (10.4.7)  

    I looked at the Alesis multimix, now does it record into Garageband as 8 seperate tracks? Like if i mic an amp, a vocalist, a drummer, and bassist at the same time using all inputs, it will show up in Garageband as 8 sepearte channels? Because what i'm really looking to do is record all at once and edit the sound of each track later. And the reason i thought i could control the sound is because on my Keystation 49e by M-Audio, if i slide the volume bar on the keyboard up... the slider in Garageband followed.
    Macbook Pro   Mac OS X (10.4.7)  
    Macbook Pro   Mac OS X (10.4.7)  

  • I need help finding a compatible and free adobe reader on my laptop vista

    I need to know what Free Adobe Reader download is compatible with my Vista Laptop computer as I need the latest version because the Adobe Reader 7 no longer allows me to print the newer PDF documents that I am receiving so I uninstalled it and need to install a newer version.  Please help........

    You can try using this tool to first remove all traces of Reader from your computer:
    http://labs.adobe.com/downloads/acrobatcleaner.html
    Then, you can download the full offline Reader installer from
    http://get.adobe.com/reader/enterprise/
    After downloading, restart your computer and run the installer before doing anything else.

  • Need help finding Sound and Vibration Toolkit Example Files

    I need help finding some Sound and Vibration Toolkit Example Files?
    http://www.ni.com/white-paper/3779/en
    From this link you get:  getting_started_otb.llb
    The missing files are:
    OAT Truncate Time Indices.vi
    Speed profile.ctl
    oa_Config Time or RPM Segment.vi
    svl-Complex Datatype Default.vi
    Running Windows 7, LabVIEW 2011, 32bit
    Sound and Vibration Measurement Suite
    Sound and Vibration Toolkit
    Thanks,
    -SS
    Solved!
    Go to Solution.
    Attachments:
    License S and V.png ‏4 KB

    SS,
    You can find these files here:
    C:\Program Files (x86)\National Instruments\LabVIEW 2011\vi.lib\addons\Sound and Vibration\Order Analysis\Resample Order Tracking\SubVIs
    C:\Program Files (x86)\National Instruments\LabVIEW 2011\vi.lib\addons\Sound and Vibration\Order Analysis\Tach Process\SubVIs
    C:\Program Files (x86)\National Instruments\LabVIEW 2011\vi.lib\addons\Sound and Vibration\Order Analysis\Resample Order Tracking\SubVIs
    svl-Complex Datatype Default.vi changes to svc-Complex Datatype Default.vi
    C:\Program Files (x86)\National Instruments\LabVIEW 2011\vi.lib\addons\_NISVFA\_Shared subVIs\Common
    Make sure you are license activated, and you will have to dig through the *vi and relink a subvi.
    Then you should get a white arrow.
    -SS 

  • I need help finding photos just downloaded to Lightroom...they only show up in "previous downloads" and not in a folder in my pictures

    I need help finding phots just downloaded to lightroom...they only show up in "prevoious downloads" and not in a folder in my pictures.  what can I do to correct this?

    Also, please be aware that Lightroom is not a file browser like your operating system Finder or Explorer is. If the photos are not in the folder you expected them to be in, it is because you (accidentally) imported them into a different folder.

  • TS1424 i need help finding a purchase that somebody made on my cedit card without my knowledge to itunes and i want to file a claim

    i need help finding a purchase that somebody made on my cedit card without my knowledge titunes and i want to file a claim

    You can view purchases via Store > View My Account on your computer's iTunes (and you can view subscriptions). If you want to contact iTunes support then you can do so via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • How do I preserve the embedded hyperlinks when printing to .pdf?   I am using Acrobat Pro XI for Mac, and when I export to .pdf the existing hyperlinks lose functionality.   I assume it's just the flick of the right button – I just need help finding that

    How do I preserve the embedded hyperlinks when printing to .pdf? 
    I am using Acrobat Pro XI for Mac, and when I export to .pdf the existing hyperlinks lose functionality.   I assume it’s just the flick of the right button – I just need help finding that button. 
    Can you help?  Thanks!

    How:  MS Word to .pdf by Command P, hitting the PDF button, and then the button for "save as Adobe pdf"
    I didn't have this problem at all on prior versions of Adobe on my PC.   This isn't a Mac attack, is it?

  • I need help finding this hp hard drive for dv6521eo

    I need help finding this hp hard drive and memory  for dv6521eo

    Hi:
    You can purchase any SATA II 2.5" notebook hard drive up to 500 GB in size.
    Memory is PC2-6400.
    Paul

  • HT1349 I need help finding an old library that itunes states my ipod is already linked to

    I need help finding an old library that it states my ipod is already linked to.  My computer recently had a terrible virus and needed to be wiped clean.  I had to redownload itunes and I bought several songs.  I want to add them to my old library because I had several cd's that I had uploaded.  Is there a way to find that old library and combine them without having to erase all the songs that are currently on my ipod???  Thanks

    Umm.  If you wiped the hard drive, then all old libraries are gone unless you have them on backup.

  • Need help finding a driver for my hp webcam . My computer say I dont have a camera but I do.

    Need help finding my camera[webcam] on my computor.

    Can you provide us with your computer model number?  Take a look in Device Manager to see if there is an Imaging Devices group that includes the webcam.  If not, is there an Unknown Device listed?  This would indicate that your webcam is detected, but there is no driver installed.  We can help you find the correct driver if that is the case.  Let's start with the computer model number.  Thanks.
    I am an HP employee. The opinions expressed are my own and not those of HP.

  • HT4061 i need help finding my iphone 4

    i need help finding my iphone4.  i didnt have the app find my iphone i bought the phone from my friend ... so i dont know the serial number but i do have his name and phone number also it carrier plan .... i need to freeze the phone they are able to make call to my family member that have iphone

    If you did not set up the find my iphone feature on the iphone itself then you cannot track it.
    Change your passwords and alert your carrier

  • I lost my iPod I need help finding it.

    I lost my iPod and need help finding it. It took me a long time to save my money for someone to come and still it please help me

    - If you previously turned on the FIndMyiPod feature and location service is on, and wifi is on and connected go to iCloud, sign in, and go to FindMyiPhone. It the iPod has been restored it will never show up.
    - Report to police and change the passwords fro all accounts used on the iPod.
    - Apple will not help
    Reporting a lost or stolen Apple product

  • Need help finding the best Mac for gf

    hi I need help finding the best desktop. I am looking to buy MAC for gf.
    she uses final cut program question is does the GB/RAM/STORAGE matter on performance?
    She has a 2009 Apple computer I want to upgrade her to a new one
    I Dont know much when it comes to specs. She edits tons of videos and pictures.
    what's recommended for a video/photo editor that's good in performance ?

    Pro consumer might go with iMac even.
    Final Cut Pro latest benefits from dual AMD graphics.
    Video is one animal, graphics a much different.
    Great site full of performance, buying and configuration ideas:
    MacPerformance Go to the main topics
    I think you need to get clear on budgets. start with mid range and add all the options and can spend $4,000 or $7,000.
    Go to the Mac Store and do some looking and Google for reviews of software, hardware of course.
    Barefeats
    Rumors Pro
    Visit the forum for FCP-X would be a place to start.
    Final Cut Pro X

  • Need help finding errors.

    I need help finding the error(s) in my code. I am writing a program to convert decimal to binary. It is not an application. It is more of a blue print for an object.
    The Program is:
    public class DecimalToBinary
         private long decimal;
         private long binary;
    //Constructor setes the variable decimal and coverts and sets the variable binary
    public DecimalToBinary(int decValue)
         decimal = (long)decValue;
         binary = convert(decValue);
    //This method does the actual conversion from decimal to binary
    public long convert(long dec)
              long remainder = 0; //Start with initial value
         String bin = ""; //Start with a blank string
              while (dec > 0)
              remainder = dec%2; //get remainder
                   dec /=2; //get the number divided by 2
                   bin = remainder + bin; //concatenate the remainder to string
         return Long.parseLong(bin);
         //Accesor methods to get the value of decimal
    public long getDecimal()
         return decimal;
    // Accessor Method to return binary Value
    public long getBinary()
         return binary;
    // To string to represent Object.
    public String toString()
         String result = "";
    result = decimal +"\t\t\t" +binary;
         name1.getDecimal()     
         return result;
    The error I am getting is:
    DecimalToBinary.java:56: ';' expected
         name1.getDecimal()     
         ^
    1 error
    ----jGRASP wedge2: exit code for process is 1.
    ----jGRASP: operation complete.
    I've tried putting the ; in there but it doesn't help and only throws another error.

    Did you read the error message?
    DecimalToBinary.java:56: ';' expected
    name1.getDecimal() What is missing? Can you see where on the line of code it has identified that the missing thing is?

  • Need help finding a audio system ( stressed)

    I have cd with over 100 songs , and I need help finding  a boombox  that will play the CD anyone have any idea, I got no help from the store.

    here are the  specifications  for Philips eXpanium eXp 2461 , if somone can help me find a boomboox with simular specifications it would very helpful
    Philips eXpanium eXp 2461 - CD / MP3 player
    CD System
    CD system type CD / MP3 player
    Media load type Top-load
    Playback modes Repeat all,
    Resume play,
    One track repeat
    CD system response bandwidth -19980.0 Hz
    Signal-to-noise ratio 85.0 dB
    CD shockproof memory 45 seconds
    MP3 shockproof memory 100 seconds
    CD-R compatible Yes
    CD-RW compatible Yes
    CD track programming Yes (50 tracks)
    Digital audio standards supported MP3
    Supported bit rate 32 - 320Kbps
    General
    Product type CD / MP3 player
    Weight 8.0 oz
    Carrying Case
    Case type None
    Built-in Display
    Audio system built-in display LCD
    Audio Features
    Sound effects Digital Dynamic Bass Boost (Digital DBB)
    Sound output mode Stereo
    Additional features

Maybe you are looking for

  • Attachments lost in Apple Mail

    Apple mail is routinely losing attachments in threads. Going back to the original message in a thread the attachments are gone. There are only placeholders with the file names. Rebuilding the mailbox doesn't work and they're gone from iCloud too. Any

  • Reg : Vc/2 to view customer master

    Hi Sap Guru When i run the report VC/2 i am getting the following error. No view can be determined for application RVKUSTA1 How to fix this error.

  • 23" LCD screen (LG) VGA w/nVidia GeForce2 MX on a G4 Quicksilver

    I just bought an LCD screen not too long ago, and it works fine with my old G3 (ATI 3D Rage Pro 6MB) although I have to use a Mac to VGA converter with it. However, on my G4 which has VGA and ADC outputs, when I connect with a VGA cable, the graphics

  • Here's MY Mail problem

    I had been crashing a lot, first off...but not so much now, so not my real concern. My concern is a new thing that just started today.... In my InBox there were like 6 or 7 new/unread emails that I deleted. Yet my icon starts to bounce again (with ou

  • How to deploy the SDA files in PI 7.1 ?

    Hi Guys, I have SDA file to deploy in PI 7.1. I could not find SDM in 7.1, Is this removed, if yes then how to deploy the SDA files. any help would be appreciated Thanks, Srini