Need Help finding Memory for Mac Pro

Hello,
I need to buy some memory for some of our computers and want to make sure I get the right ones. While searching I have yet to find one that actually says it is specifically compatible with our computers.
Here are the computer specs:
  Model Name:          Mac Pro
  Model Identifier:          MacPro1,1
  Processor Name:          Dual-Core Intel Xeon
  Processor Speed:          2.66 GHz
  Number Of Processors:          2
  Total Number Of Cores:          4
  L2 Cache (per processor):          4 MB
  Memory:          1 GB
  Bus Speed:          1.33 GHz
  Boot ROM Version:          MP11.005C.B08
  SMC Version (system):          1.7f10
  Serial Number (system):          G8724313UQ2
  Hardware UUID:          00000000-0000-1000-8000-0017F2046444
I know they need to be installed in pairs so I'm looking for either a 2GB Upgrade (2x1GB) or 1GB Upgrade (2x512MB).
Thank you in advance,
Randy

Amazon has excellent top tier likely better $40 2x2GB which I and others have been buying up.
How To Install and Remove Memory Mac Pro 
https://support.apple.com/kb/HT4433
2x2GB FBDIMM DDR2 667MHz @ $39 
http://www.amazon.com/BUFFERED-PC2-5300-FB-DIMM-APPLE-Memory/dp/B002ORUUAC/

Similar Messages

  • I need help finding cases for the ipod touch thrid gen help.

    i need help finding case for ipod touch thrid gen help.

    - Try another cable.
    - Try another USB port
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Try on another computer. Just backup a couple of times. Do not sync.

  • Need help finding the best Mac for gf

    hi I need help finding the best desktop. I am looking to buy MAC for gf.
    she uses final cut program question is does the GB/RAM/STORAGE matter on performance?
    She has a 2009 Apple computer I want to upgrade her to a new one
    I Dont know much when it comes to specs. She edits tons of videos and pictures.
    what's recommended for a video/photo editor that's good in performance ?

    Pro consumer might go with iMac even.
    Final Cut Pro latest benefits from dual AMD graphics.
    Video is one animal, graphics a much different.
    Great site full of performance, buying and configuration ideas:
    MacPerformance Go to the main topics
    I think you need to get clear on budgets. start with mid range and add all the options and can spend $4,000 or $7,000.
    Go to the Mac Store and do some looking and Google for reviews of software, hardware of course.
    Barefeats
    Rumors Pro
    Visit the forum for FCP-X would be a place to start.
    Final Cut Pro X

  • Need help with G4 to Mac Pro Migration!

    After buying my 2.66 GHz Mac pro, i followed the instructions as to how to start up the G4 in "Target Disk Mode" for migration. Was completely useless.
    Whether clicking the button in the "Startup Disk" prefs, or holding down 'T' and restarting, i got the same results: My G4 system would restart but before anything appeared on the screen, it shut down and stayed.
    I've been searching all over these forums and doing a lot of reading and experimentation. It sound like a lot of people aren't having good luck with the migration wizard anyway.
    II did finally manage to get the Mac Pro to log onto the G4 with a cross-over cable. But i need to transfer a tremendous amount of data both from my primary account on the G4 and 3 non-boot internal drives.
    Having to go through a public folder isn't going to cut it. .MAC isn't either.
    Is there some way i can link up the two systems such that i can retrieve what i want from the G4's drives (without spending additional money).

    Efforts to make "Target Disk" mode function didn't seem to go anywhere.
    I did at last figure out how to get access to disks all disks on my G4 from my Mac Pro, however.
    For those who may need to know it required these simple steps:
    {1} I connected both systems to a hub (or DSL router in my case) via ethernet. Connecting the two machines with an ethernet crossover cable also worked, but of course my access to the internet was then unavailable.
    {2} Opened TCP/IP in Network prefs on both machines and set them up identically according to my ISP's instructions, as always, but with differing IP addresses.
    {3} Under the Services tab in Sharing preferences i checked the box to enable "Personal File Sharing"
    {4} I then chose Connect to server... {command-K} in the Finder on the Mac Pro and entered the LAN IP address of the G4.
    {5} At the login prompt i entered my G4 main account login & password information.
    {6} When the window with my G4 system's name came up and asked which disk(s) to mount, i selected all of them and clicked { Ok }.
    Presto. The G4 main drive, my 2 disk raid, my 4th disk, and my home directory all popped up on the Mac Pro Desktop.

  • Need help installing 8800GT into Mac Pro (early 2008)

    i'm having the hardest time installing my newly purchased (through newegg) evga geforce 8800GT video card into my mac pro (8-core model purchased in early 2008.)
    when i first installed it and booted up, i heard a nonstop beeeeeeeeep. i called evga and they quickly explained to me that the supplemental power cord for the video card wasn't plugged in.
    this is where my problem lies: i can't find where to plug in the supplemental power cords! it looks like two white plastic pieces each with 3 pins in them. do i need to buy another adapter? do i have the wrong card? i'm searching all over google for help and even watched a couple youtube videos but can't seem to find anyone whos having the power cord problem like i am. thanks in advance!

    thanks so much for responding.
    this is the card i purchased: http://www.newegg.com/Product/Product.aspx?Item=N82E16814130319
    is this not the same one as the one you sent me?
    i saw those "aux ports" as noted in the link you sent me. but i dont think the cable i have connects to those.
    the aux power cable that came with my video card is shown in this picture:
    http://www.newegg.com/Product/ShowImage.aspx?CurImage=14-130-319-S06&ISList=14-1 30-319-S01%2c14-130-319-S02%2c14-130-319-S03%2c14-130-319-S04%2c14-130-319-S05%2 c14-130-319-S06&S7ImageFlag=1&Item=N82E16814130319&Depa=0&WaterMark=1&Descriptio n=EVGA%20GeForce%208800GT%20Superclocked%20512-P3-N802-AR%20Video%20Card%20-%20R etail
    its the third one from the left.

  • Need to find where my mac pro is registered

    I registered my mac pro need to find out where i registered it too.
    This is not a personal mac, but one registered for my company, need to clone the info for a new purchase.

    Try this apple.com site:
    https://selfsolve.apple.com/agreementWarrantyDynamic.do

  • Memory for Mac Pro 1,1

    The seller proclaims that "THIS IS SERVER MEMORY. IT WILL NOT WORK IN STANDARD DESKTOPS."
    But the specs seems correct for the Mac Pro 1,1.
    http://www.ebay.com/itm/16GB-4x-4gb-DDR2-PC2-5300F-4RX8-667MHz-ECC-FB-DIMM-Super Micro-Tyan-Memory-RAM-/290980904965?pt=US_Memory_RAM_&hash=item43bfd04005
    Can anyone please confirm?

    For price and quality
    2x2GB FBDIMM DDR2 667MHz @ $30
    http://www.amazon.com/BUFFERED-PC2-5300-FB-DIMM-APPLE-Memory/dp/B002ORUUAC/
    http://www.datamemorysystems.com/apple-mac-pro-8-core-2-x-quad-core-intel-xeon-3 -0ghz-bto-2007-memory-upgrades/
    I've read of too many people having to keep exchanging their new FBDIMM from OWC

  • Need help: Belkin Flip for Mac mini doesn't support the new Intel chip?!

    Hi folks,
    I recently purchased a Mac mini Intel Core Duo and planned to use a Belkin KVM Flip switch for it and my Sony VAIO.
    However, the current Belkin KVM Flip switch for the Mac Mini does NOT support the Intel Core Duo. Until Belkin comes up with a switch that does, I have to unplug and replug my monitor, keyboard and mouse into the appropriate computer to use either one. Obviously, that isn't very convenient. Has anyone else encountered this problem and come up with a better solution?
    Thanks.
    Mac mini Intel Core Duo   Mac OS X (10.4)   KVM switch for a Sony VAIO

    I think what you're saying is that I should just swap out the monitor cable from one computer to the other when I want to use that computer. Not elegant, as you say, but workable.
    Given you want to use a Flip I gather you're wanting both of your computers permanently connected to your TV/display at the same time. To do that without a KVM you will need to, for instance, connect your Mac mini to the RGB input and then your Vaio to HDMI. So, to select which computer you want you actually want to view you use the display remote just like you would if you were swapping from your cable box to your DVD player. I would suggest you play around with whatever combination gives you the best quality for both computers as not all inputs to your TV have the same quality.
    That takes care of video. Now, for USB, yes you will have to physically swap a cable although there are many ways you can do this which does in some way depend on how you place your computer and the peripherals you want connect to one or both computers. What you do is use a USB hub with everything connected (keyboard, mouse scanner etc) to it and which ever computer you want to use you connect it to the hub.
    It's all about finding a solution that suits you the best.
    PS As for the Flip, you might want to note that the Flip does NOT have digital DVI connectors. It has two analog VGA connectors which at high resolution does not perform at all well. I would suggest you ensure that the VGA performance to your 1080i TV is acceptable before buying this product.

  • Need Help with Javascript for Acrobat Pro 9

    Hello,
    I am creating a PDF form in Adobe Acrobat Profession 9.  Not having a lot of experience with Javascript, I have found this forum very helpful and have used many of the script examples for other issues I have had.  I was hoping someone could help with the following script, I have tried many variations, cannot get it to work.
    var ratio = this.getField("ratio").value
    var concentration = this.getField("concentration").value
    var result = this.getField("result").value
    if(ratio.value>=50.00)
    {result.value ='PASS';}
    if(ratio.value".value>=40.00)
    {result.value ='PASS';}
    if((concentration.value ==61) && (ratio.value >= 49.25))
    {result.value ='PASS';}
    if((concentration.value ==61) && (ratio.value >= 39.25))
    {result.value ='PASS';}
    if((concentration.value ==62) && (ratio.value >= 48.50))
    {result.value ='PASS';}
    if((concentration.value ==62) && (ratio.value >= 38.50))
    {result.value ='PASS';}
    else
    {result.value = 'FAIL';}
    This is just a piece of the code  The concentration values run from 61 through 99 and the ratio value varies for each concentration value, there is a high ratio and a low ratio.  The result of this field with populate the results field with a PASS or FAIL.  This is not working......any help is greatly appreciated!

    Thanks George.  I updated the script to:
    // Get a reference to the result field
    var ratio = this.getField("ratio");
    // Get a reference to the result field
    var concentration = this.getField("concentration");
    // Get a reference to the result field
    var result = this.getField("result");
    if(ratio.value>=50.00)
    {result.value ='PASS';}
    if(ratio.value >=40.00)
    {result.value ='PASS';}
    if((concentration.value ==61) && (ratio.value >= 49.25))
    {result.value ='PASS';}
    if((concentration.value ==61) && (ratio.value >= 39.25))
    {result.value ='PASS';}
    if((concentration.value ==62) && (ratio.value >= 48.50))
    {result.value ='PASS';}
    if((concentration.value ==62) && (ratio.value >= 38.50))
    {result.value ='PASS';}
    else
    {result.value = 'FAIL';}
    However, I am still getting a FAIL result even when the ratio is 50.00 or equal to the passable ratio.

  • Need  help finding tutorials for segmenting and contouring

    I'm completely knew to photoshop and other image editting software so I'm rather lost at the moment. Would someone please direct me to a tutoral or tutorials detailing the proper method to contour or segment an image?
    Thanks for the help.

    Using the quick selection tool should give better results for selecting the hands
    than the magic wand.
    Using the hand at the top as an example:
    1. Make a selection around the hand using the retangular marquee tool and then right
       click and choose new layer via copy.
    2. Select the quick selection tool and click inside the hand as many times as it
        takes to select the hand (some of the things outside the hand might be selected also)
    3. Press the alt key and click on the areas outside the hand to deselect them
        You will probably have to zoom in close to see what's really selected and alternate
        between adding to the selection and subtracting from the selection until it looks good.
    4. Then select where it says Refine Edge in the tool options bar and adjust the selection
        till it looks good then click ok.
    5. Go to the bottom of the layers panel and click the icon that says Add layer mask
       (having a layer mask will let you do any touch ups by painting on the layer mask
        with either a white brush to show more of the hand or a black brush to hide more
        of the hand)
    6. Repeat the steps for the other hands in the picture.
    Here's what your layers panel and selection of the hands should
    look like. ( added the white color fill layer to better see how good the hands were selected)
    I guess you'll have explain more about the contouring part.
    MTSTUNER

  • Need help finding case for droid 4

    I have a Verizon Droid 4 and can't find a case to fit it, any suggestions?

    Ordered one from Amazon but it is for the XT894 and it is too small.  I've only had the phone for about a year and Verizon doesn't sell them anymore

  • Need help finding driver for HpG42 - 459TX " window 7'

    i just format my lappy since its infected with virus but i cant seem to find any driver for this model.
    my english is worst, im sorry
    This question was solved.
    View Solution.

    Hi,
    All the drivers you require are on the following links, depending on whether you have the 32bit or 64bit OS installed.
    Windows 7 32bit Drivers
    Windows 7 64bit Drivers
    All the best,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • I need help finding accessories for my new iPad 2

    I just ordered an iPad 2.  I already got a case for it.  I am looking for an adapter that will allow me to output my screen (video and audio) to my HDTV.
    And I need recommendations for a bluetooth/wireless keyboard.  I am hoping to get something for less money than the ones on the apple site.
    Also, what is everyone's opinion on screen protectors for the iPad 2?  Are they necessary?  Is the screen scratch proof?

    I am looking for an adapter that will allow me to output my screen (video and audio) to my HDTV.
    http://store.apple.com/us/product/MC953ZM/A
    And I need recommendations for a bluetooth/wireless keyboard.  I am hoping to get something for less money than the ones on the apple site.
    Just about any Bluetooth keyboard should work. I haven't seen many full-size keyboards that are significantly less expensive than Apple's, and buying Apple's would be less headache should you need support from Apple in getting it to work, so I'd suggest staying with Apple unless you have specific needs in a keyboard.
    what is everyone's opinion on screen protectors for the iPad 2?  Are they necessary?  Is the screen scratch proof?
    No screen is completely scratch-proof, but I've had two iPads since they were first released, using them extensively, and have never found any need for a screen protector beyond a normal case.
    Regards.

  • How do I preserve the embedded hyperlinks when printing to .pdf?   I am using Acrobat Pro XI for Mac, and when I export to .pdf the existing hyperlinks lose functionality.   I assume it's just the flick of the right button – I just need help finding that

    How do I preserve the embedded hyperlinks when printing to .pdf? 
    I am using Acrobat Pro XI for Mac, and when I export to .pdf the existing hyperlinks lose functionality.   I assume it’s just the flick of the right button – I just need help finding that button. 
    Can you help?  Thanks!

    How:  MS Word to .pdf by Command P, hitting the PDF button, and then the button for "save as Adobe pdf"
    I didn't have this problem at all on prior versions of Adobe on my PC.   This isn't a Mac attack, is it?

  • I need help! Do I need to have a MacBook/Mac Pro to submit/distribute an app game in Apple Store? I hired a designer and developer to do it for me..should be done next week.I have an Ipad.Is Ipad going to be just fine?I know I have to sign up for the Deve

    Hi,
    I need help! Do I need to have a MacBook/Mac Pro to submit/distribute an app game in Apple Store? I hired a designer and developer to do it for me..should be done next week.I have an Ipad.Is Ipad going to be just fine?I know I have to sign up for the Developer Program(I started that..though not finished yet)My developer will walk me thru submitting it.Please help.
    Thanks,
    sheapps28

    You'll need a Mac with a support OS X and tools to complete the process.

Maybe you are looking for