Need help fixing jittery rolling credits for 23.98 sequence

I'm working on an DVC PRO HD project shot 23.98, 960x720. I'm working native 23.98 in Final Cut Pro 5.1.4 and am trying to do a credit roll with both centered text lines, and justified text with the gap running down the middle.
I've created the text template in photoshop and imported into FCP. After applying the motion settings, the file renders out just fine in 29.97 but low and behold, when I do the same motion settings in my 23.98 sequence, the text is jittery as all... Bad artifacts and strobbing.
I tried using the Photoshop file in Motion and Live Type using the unrendered file project in FCP. Tried rendering 23.98 in After Effects. No go. Same ugly results.
Tried the usual in FCP-- appying de-interlace, flicker filter, shift fields, changing the length of the roll and also adjusting the motion points... no help at all. Tried using a smooth rolling exported 29.97 media file into the 23.98. Echk!
I'm running MacPro 2.66 w/ 3GB Ram. Also have the KonaLHe hooked up to my NTSC for preview.
Help! Thanks!
Reed
MacPro 2.66 3GB Ram Mac OS X (10.4.9)

Yep, tried all that too. Changed keyframe positions, also changed length of the clip. Who knows... maybe never hit the right configuration. I ended up laying the show off to 29.97 and insert editing the 29.97 credit roll. Worked out perfectly although I'm still miffed nothing seemed to work in 23.98 land for smooth credit rolls. Thanks for the help.

Similar Messages

Well my ipod 4th gen was updated it shut off and now when i try to turn it on it stays on the apple logo for abit then gets stuck on a white screen od blue or mixed colores i really need help fixing this plzz help :(

Well my ipod 4th gen was updated it shut off and now when i try to turn it on it stays on the apple logo for abit then gets stuck on a white screen od blue or mixed colores i really need help fixing this plzz help

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Uloading ebook using iProducer rec'd error: ERROR ITMS-9000: "Unable to parse nav file: toc.ncx" at Book. I don't understand and need help fixing it. Please Help

Uloading ebook using iProducer rec'd error: ERROR ITMS-9000: "Unable to parse nav file: toc.ncx" at Book. I don't understand and need help fixing it. Please Help if you've the knowledge.
Many Thanks

Yep, i just did it again. The entire scroll-bar widget, complete with formatted text, graphics, etc., pasted itself nicely in another book. Two different files, the same widget.
I use the scroll-bar widgets for most of my texts. (I have audio buttons on the side, and the scripts are within the widget, to the side). My only text is within widgets, and text boxes, naturally.
I am following your recommendation: cleaning files, etc. I am remaking the book anew. I need to convince the EPUB bot or whatever that my file looks and works nicely on all my devices. You would expect an error message when previewing the book: 'Hey Amigo, your file is flawed, stop working on it, and get back to the drawing board." Should be able to try again next Monday.

I deleted aperture and now my sistem is acting crazy. I desperately need help fixing it.Can anyone help me please?

I deleted aperture and now my sistem is acting crazy.The dock disappeared and almost all icons are gone except for their names.I have an important project for tomorrow and I desperately need help fixing it.Can anyone help me please?

Well it all started with Aperture 3 trying to import some photos from my iphone.It took ages to import those photos and like I was in a hurry to finish my work in Illustrator so I tryied to force quit on A3 and it didn´t, so I shut down the computer and started over.it was all ok but I uninstalled the A3 and the I realized the icons were back to original form and a few fonts changed.so I Installed the trial version of A3.I did a restart of the system and then there was.aperture lauching but no dock and a 80% of the icons disappeared, but the names of the files and folder remained.and I cand acces the apps from the apple sign on the left corner.I tried also restarting a few time but it´s always the same.I am a recent user of a mac , and please excuse my bad english.If this is in any way useful please help me!

I did a manual restore but it gave me an error it was 3914 i need help fixing it.

i did a manual restore but it gave me an error it was 3914 i need help fixing it.

From this Apple support document: iTunes: Specific update-and-restore error messages and advanced troubleshooting
This device is not eligible for the requested build: Also sometimes displayed as an "error 3194." If you receive this alert, update to the latest version of iTunes. Third-party security software or router security settings can also cause this issue. To resolve this, follow Troubleshooting security software issues.
Downgrading to a previous version of iOS is not supported. If you have installed software to perform unauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. First you must uninstall the unauthorized modification software from the computer, then edit out the "gs.apple.com" redirect from the hosts file, and then restart the computer for the host file changes to take affect. For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod—follow steps under the headingBlocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart. Also, using an older or modified .ipsw file can cause this issue. Try moving the current .ipsw file, or try restoring in a new user to ensure that iTunes downloads a new .ipsw.
Error 3194: Resolve error 3194 by updating to the latest version of iTunes. "This device is not eligible for the requested build" in the updater logs confirms this is the root of the issue. For more Error 3194 steps see: This device is not eligible for the requested build above.
B-rock

I need help getting the license number for Adobe Photoshop Elements. However, It doesn't recognize me as an authorized user. Can someone help?

I need help getting the license number for Adobe Photoshop Elements. However, It doesn't recognize me as an authorized user. Can someone help?@

I am having the same problem...did you ever fix it?

I think I need help with driver (software) settings for D110a

I think I need help with driver (software) settings for D110a all-in-one
Product: D110a all-in-one
OS: Windows XP Professional
Error messages: None
Changes before problem appeared: None--new installation
The quality of photo images (mostly JPG files) in printouts is awful even though the files display beautifully on the PC screen. I am using
IrfanView software for displaying/printing. As far as I can tell, IrfanView is not the problem.
When I print the same images on a Deskjet 5150 attached to a different PC also running XP Pro and IrfanView, the quality of the printouts is at
least acceptable, Some would probably say good or very good.
It's dificult to explain in words the problem with the printouts. A picture of really pretty vegetables (squashes, tomatoes, watermelon, etc) comes
out much too red. Moreover, the red, which appears shaded on the screen, seems to be all one shade in the D110a printouts.
Something similar happens to a view of a huge tree in full leaf. On screen, there are subtle variations in the "greenness" of the leaves. In the
printout, all green is the same shade. In the same printout, the trunk of the tree is all a single shade of grey. It isn;t even obvious that the
trunk is a round, solid object.
I liken the effect to audio that disappears entirely when you lower the volume and gets clipped into square waves in even moderately loud passages.
I don't know whether the D110a driver software permits adjusting the parameters that appear to be set incorrectly, and if adjustments are possible,
how I would identify which parameters to adjust, how I would access them, or how I would adjust them. I'm hoping that someone can help. Thanks.
I forgot to mention that I have used the diagnostic application and it tells me that there are no problems.
e-mail me at [email protected]

brazzmonkey wrote:
Hi everyone,
I noticed the following message when network starts on my gateway
Warning: This functionality is deprecated.
Please refer to /etc/rc.conf on how to define a single wired
connection, or use a utility such as netcfg.
Then I realized the way network settings should be written in rc.conf has changed. But I can't figure out how this should be done.
Currently, my set up is the following (old way):
INTERFACES=(eth0 eth1)
eth0="dhcp"
eth1="eth1 192.168.0.10 netmask 255.255.255.0 broadcast 192.168.0.255"
ROUTES=(!gateway)
eth0 is on DHCP because the IP is dynamically assigned my ISP.
eth1 has a fix IP because it's on the LAN side.
No problem to use DHCP on eth0 with the new settings.
But for eth1, I don't know what I am supposed to write for gateway.
Wiki isn't clear on that one either, and it looks like many articles still refer to the old way.
Any guidance appreciated, thanks.
brazzmonkey,
you can't define 2 interfaces the old way (even though I saw some tricky workaround somewhere in the forums).
Use, f.e., netcfg:
Comment your old lines.
In /etc/rc.conf insert:
NETWORKS=(Eth0-dhcp Eth1-static)
DAEMONS=(..... !network @net-profiles ....)
In /etc/network.d create 2 files:
First one is named Eth0-dhcp.
Contents:
CONNECTION="ethernet"
DESCRIPTION="Whatever text"
INTERFACE=eth0
HOSTNAME="your hostname"
IP="dhcp"
DHCP_TIMEOUT=15
Second one is named Eth1-static.
Contents:
CONNECTION='ethernet'
DESCRIPTION='whatver'
INTERFACE='eth1'
HOSTNAME='hname'
IP='static'
ADDR='192.168.0.10'
GATEWAY='192.168.0.1' # your gateway IP
DNS=('192.168.0.1') # your DNS server
The names Eth0-dhcp and Eth1-static are not magic. They just must be the same in rc.conf and in /etc/network.d.
Hope it helps.
mektub
PS: netcfg must be installed.
Last edited by Mektub (2011-07-20 14:07:05)

I need help fixing itunes crashes on my old mac

i need help fixing itunes crashes on my old mac

Thanks for your reply,
I have both the silver discs specific to my iMac and Mac Pro models that you receive with your Mac, and a general copy of Snow Leopard that you buy from the store.
I used the silver disc that is specific for my iMac to install the drivers, and Boot Camp 3.0 on my iMac. But with the Mac Pro, the software is older and only has Boot Camp 2.0, thus I'm wondering if I can simply use the software on the general copy of Snow Leopard I own, or does the silver disc contain specific drivers for my Mac Pro that I need?
I'm under perhaps the wrong impression that the silver discs that you get with your Mac purchase contain drivers for your specific Mac model which you can't get from the general Snow Leopard disc.
Thanks.

I need help fixing my iPod Touch 4th Generation myself

I have an iPod Touch 4th Generation and the home button isn't working i think its stuck problem is my warranty expired and i have no money to fix it so i need help fixing it myself again my warranty expired and i have no money to fix it so HELP PLEASE

Try:
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

When trying to install Aid Virtual Instruments I get a warning no mountable file systems. I need help fixing the problem.

When trying to install Pro Tools 10.3.3 Aid Virtual Instruments I get a warning no mountable file systems. I need help fixing the problem.

Thanks Linc for responding to my post. I searched a little further and found I was missing a file. Once I downloaded the fix, I was able to install the software from the original download.

Need Help to create new screen for RF Sapconsole

Hi Guru's
I'm new on RF (but some years in ABAP) since last week.
I need help to create new screens for RF (SAPLLMOB).
Can someone explain me the procedure to create screen (with ABAP code after) or perhaps someone have an exemple (simple or not) ?
I have to develop 2 new screens with really few time.
And, another subsidiary question :
how SAP can transfert information between the flash gun and the screen i have developped.
Is there some code to add to enable this functionality or it is include in SAPLLMOB on standard fields ????
It's a new strange world for me today...
Many thanks to everyone who can explain me
Alain

hi,
I am facing this problem as well. Is there any reference to create the new screen?
Hope someone can help! Thanks!
Regards,
Darren

How do I reorder songs in a playlist in the new itunes??? I can no longer just click and drag. When I click, it doesn't move!!!! Need help ASAP- trying to prepare for an aerobics class and need songs in a specific order!

How do I reorder songs in a playlist in the new itunes??? I can no longer just click and drag. When I click, it doesn't move!!!! Need help ASAP- trying to prepare for an aerobics class and need songs in a specific order!

Vera,
Use View > View Options, and set 'Sort By" to "Manual Order."
Then you will be able to drag-n-drop songs up and down the list.

Need help with a activation code for Adobe Acrobat X Standard for my PC,, Don't have older version serial numbers, threw programs away, only have Adobe Acrobat X Standard, need a code to unlock program?

Need help with a activation code for Adobe Acrobat X Standard for my PC, Don't have older Version of Adobe Acrobat 9, 8 or 7.

You don't need to install the older version, you only need the serial number from your original purchase. If you don't have them to hand, did you register? If so, they should be in your Adobe account. If not you really need to contact Adobe, though it isn't clear they will be able to do anything without some proof of purchase etc.

I need help getting new authorization codes for digital copies

I need help getting new authorization codes for digital copies of movies. Can someone help me out?

There's a lot of results in Google when you search for this but unfortunately refreshing the page doesn't seem to generate a different code anymore. Mine also says already redeemed

I need help in Downloading Adobe Elements for my Mac & Adobe Acrobat for my laptop...I have been battling for the last day.

I need help in Downloading Adobe Elements for my Mac & Adobe Acrobat for my laptop...I have been battling for the last day.

~graffiti wrote:
PjonesCET wrote:
I know if you attempt to download and exe file to Mac from a Mac Partition you'll get something like. Cannot not understand file format octet-stream. This means it does not recognize MS execute files.
Not necesarily. I've done it a few times.
PjonesCET wrote:
I'm not sure you can download a PC copy of Acrobat 9 unless you operating from bootcamp or other such application and running the PC partition.
Yes. You can.
I've learned something. New. This must be recently changed. That last time I clicked on a Link I though was a dmg file and turned out it was and exe file my Macs wouldn't allow me to do so. But haven't tried recently everytime and exe file comes up I cancel. I gues I am used to the time everytime a Virus or some other nasty was downloaded it was packaged in and exe file and Macs owuldn't allow it. I suppose with the INtel guts now they can no longer refuse to download.

Need help fixing jittery rolling credits for 23.98 sequence

Similar Messages

Maybe you are looking for