Need Help! Flash to HTML5

I have a bunch of flash interactions that I need to publish out to an HTML5 format to play on iPad. I'm currently using CS4 Professional. Is there anything I can do to be able to avoid having to redo these in another tool?  I need to be able to publish out in HTML5 and in an MP4 format.
Thanks!

At the moment there is no easy one-click solution to get your interactive flash content to html5. Toolkit for create JS can be anything betweeen a 1% (does not help at all) to a 80% solution (helps a lot) depending on how complex your content is. But it`s not a converter/exporter, even Adobe admits that. Try Flash CS6 out, its not worth blindly upgrading imo.
If your swf results are not wildly interactive (game, interactive drawing or sth) your best bet is to export to video only.

Similar Messages

  • Need help FLASH not launching and not uninstalling "licensing for this product has stopped working".

    Need help FLASH not launching and not uninstalling "licensing for this product has stopped working" and " you can only install one adobe product at a time please complete the other installation"  Flash was working absolutely fine before, I have no idea why this happened.

    I am having similar problem.  Can't open any of CS3 programs after trying to download Dreamweaver Trial, which wouldn't work because "couldn't remove DLM extention" error message.  So now I can not run Illustrator, Photoshop, or even Adobe Reader.  These are properly licensed for about a year. I get "License for product has stopped working".  Have 2 pending cases open with Adobe support (one for Dreamweaver trial, one for license problem) since 8/3 with NO ANSWERS - It says answers within 1-3 business days.  Was on phone support hold today for over 3 hours before line went dead with no help.  What is up with adobe support?  Can anyone help?

  • BIOS doesnt recognize SATA connected Hard Drive- need help flashing bios from bootable USB

    hi
    I have an envy laptop running InsydeH20 bios rev f14.
    the bios doesn't recognize the internally connected hdd/ssd.
    I have heard that with insyde bios', sometimes you have to unlock 'secret capabilities' to recognize hardware incl internal hdd.
    but I am just trying to reflash my bios.
    the problem is that I cant get into windows because it doesn't recognize my hard drive and windows doesn't allow insallation to usb connected drives.
    I downloaded the patch from hp.com for my product and it actually has an option for making a bootable USB for use on the actual system, and I did this. the instructions are to just restart my computer with the bootable usb. I have tried Legacy support on and off, neither updates bios.
    I highly doubt it has anything to do with the physical sata connector.
    basically I need to flash my bios from bootable usb. I have done some research about making a bootable dos usb etc etc but I don't know what program to even run and how..
    this is a link to my product:
    http://h10025.www1.hp.com/ewfrf/wc/product?cc=ca&dlc=en&lc=en&os=4132&product=5400031&sw_lang=
    Pleeeeeaaseee someone help!!!!!!!!!!!!!!!!!!
    Thanks!!

    hi
    I need to flash the bios of my system. the bios is not recognizing hardware and cannot boot into windows to run the bios flash for windows.
    on my other comp I ran the bios update patch and chose ' install to bootable usb ' so that I could use it on my system.
    cannot run on my laptop. tried booting from the media. tried allowing 'legacy' compatibility.
    im running insydeH2O rev f14 right now.
    here is a link to my system:
    http://h10025.www1.hp.com/ewfrf/wc/product?cc=ca&dlc=en&lc=en&os=4132&product=5400031&sw_lang=
    thanks to anyone who can help!!!!!!!!!!!!!!

  • Need help with Responsive HTML5 screen layout in RoboHelp HTML 11

    I have a few questions/issues regarding screen layouts for Responsive HTML5 output in RoboHelp HTML 11.
    First off, I decided to just use the Theme1_Standard layout that came with the program (only other default option was Theme2_Government) and started customizing the layout. I originally added a company logo to the 'Header' component in the Customization dialog, but have since decided to remove it. I can't seem to do this from the dialog, so I tried just deleting the image file from the whole project. The file is gone, but the logo is still there. This is only displayed in the header when a topic is displayed, it does not appear in the header at the TOC, Index, Search screen, etc. How do I get rid of this???
    Secondly, the text in the header for the topic screens appears differently than the one on the screens for the TOC, Index, Search, etc. In the former of these, the header is displayed in maroon text in a much smaller font, similar to that used in the topics. In the latter, the topic is displayed based on what I configured in the Layout Customization dialog; much larger in white text on a black background. In each case the heading text serves as a link to the default display topic shown when the help file is launched, which is fine. However, how do I get the header to be consistent across all screens (topics and TOC, Index, etc. alike)???
    As a result of these issues with the Theme1_Standard layout, I'm trying to import a different Responsive HTML5 screen layout than the two provided within RoboHelp HTML 11 (Standard and Government). I did some digging in the program help and found another layout I'd like to use (Theme3_Black.zip) at RoboHelp screen profiles and layouts. I tried importing the new layout, but it's looking for a .SLZ file and the only one in the files that came with the ZIP file is SLZConfig.xml, and I don't think that's what I need, though quite honestly, I don't know.
    I extracted the contents of the ZIP folder to a folder in the !ScreenLayout! folder within the RoboHelp project, but when I open the project, I don't see Theme3_Black as an option. I need to figure out how to import this screen layout because the color scheme matches the one used in the program for which I am writing the help. How do I import and apply this other screen layout???
    Any tips, tricks, or guidance on any or all of these items would be GREATLY appreciated.
    Thanks much in advance,
    Dave

    Item two of the original post is also something I am having issues with:
    "Secondly, the text in the header for the topic screens appears differently than the one on the screens for the TOC, Index, Search, etc. In the former of these, the header is displayed in maroon text in a much smaller font, similar to that used in the topics. In the latter, the topic is displayed based on what I configured in the Layout Customization dialog; much larger in white text on a black background. In each case the heading text serves as a link to the default display topic shown when the help file is launched, which is fine. However, how do I get the header to be consistent across all screens (topics and TOC, Index, etc. alike)???"
    We have the text toggle between red, white and blue depending upon the topic selected. In the customize Selected Layout we have the title color set to white. It seems to think that it is a link and I would like to know how I can force the text to be white and to stay that way no matter which topic is selected.

  • Need help flash cs3

    Hi all,
    I have a very basic 5 rotating images with a simple script to link to a company website when a person click on the pictures.
    My question is when i have uploaded it onto my website it works for a few days perfectly, then all i get is a white blank square where the flash ad should be. I have to rename the .swf file then upload it again and it works fine again for a few days.
    I have other flash ads on my website and they all work fine except for this one. I cant keep changing it every few days as it is driving me crazy.
    Any help would be greatly appreciated.
    Thanks
    Ken

    By the way if you read pc magazines norton internet security
    came 2nd last in the detetion rate! (Luckily for me it came with a
    6month trial of kasperspy!! No more norton for me). All the big
    brands were at the bottom of the list and ill try to take a pic of
    it. So there MIGHT be a virus, who knows?

  • Need Help, Flash Froze

    Flash is frozen, not responding and I was a few hours into
    making something, is there any way to either unfreeze it or does
    flash have a recovery system or anything?

    Have you not saved in hours? You should save every 15 minutes
    at the absolute longest, in case your computer crashes on you.
    The only way to unfreeze Flash is to wait it out. You can go
    into your task manager and turn off unnecessary tasks with the hope
    that the entire system doesn't crash, and that Flash will finish
    whatever it needed and unfreeze, or you can just wait. After a
    time, though, you are better off just forcing it to close, and
    eating the lost work.
    Flash does not have a recovery system, to my knowledge, and
    it is something that they have needed to add for several
    versions.

  • Need help - flash objects

    Hi, I'm beiginner & I'm using dreamweaver 8, in box, where I can crate new flash button, I chose button style, type text and when I push OK pop-up window with error: <"button1.swf" is an invalid filename. Please enter a different name> and there is no matter what kind of filename I write always pop-up this error... what I need to do?

    Start by validating your HTML code.  You have numerous code validation errors on line 230 caused by UPPER case tags.  XHTML doc types, need lower case tags.  After you fix your code errors, republish your page.
    HTML Validator - http://validator.w3.org
    CSS Validator - http://jigsaw.w3.org/css-validator/ 
    HTML & CSS Tutorials - http://w3schools.com/
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists
    www.alt-web.com/
    www.twitter.com/altweb
    www.alt-web.blogspot.com

  • Need help Flashing to MSI's new Bios revsion for the MSI GT70 0NC

    MSI just came out with a new bios revision for the MSI GT70 0NC I was wanting to know which bios revision is for my MSI notebook?

    Hello again my friend, yes it's me again. Here's a screenshot from our last bios flash you helped me out with. Remember I have Windows 8 and still used the MSI flashing tool because I have the older MSI GT70 0NC So I was wanting to know which of the new ones I can obtain and download for my notebook again.

  • Need help flashing 865PE Neo2 BIOS

     I recently bought a MSI 865PE Neo2-S and it came with the 1.2 Bios, I can't get a good overclock from this bios, and when I use corecenter to raise the FSB to 250 at 5:4 ratio it shows 3000 mhz but I see no changes in WCPUID etc, so I decided to flash to the 1.52 BIOS, i've already got it here but I hear you can use a flasher instead of doing the old floopy, dos thing
     I downloaded LiveUpdate3 but it will flash my BIOS to 1.4 and I just want to install 1.52
     I did a quick search around the forums and didn't find much about it, any help would be appreciated

    First of all I suggest that you install LIVE MONITOR and LIVE UPDATE utilities.  Secondly, get yourself a new floppy disk.  Allow utility to go online and retrieve updates for your product.  After that the utilty will tell you what it found. follow directions to the T and install any NEW DRIVERS BEFORE YOU DO ANY FLASHING!!! Reboot new drivers run utility (LIVE-UPDATE)and choose BOIS and start. I recomend you select DOS option over WINDOWS option FOLLOW DIRECTIONS IT WILL PROMPT YOU.. DO NOT!! REBOOT!! UNTIL PROMPTED!! GOOD LUCK!  Sean Reilly875

  • Need help flashing nf980 g65 bios

    I just put together the NF980-G65 with a 6 core AMD processor. From what I understand it doesn't support the 6 cores unless I flash it to the latest BIOS update. It won't let me install Windows 7 or XP so I'm trying to use mflash. I downloaded the zip and extracted it onto a usb drive that's formatted with fat32. Then in the  BIOS when I try to do the update it can't find the file. It only shows partition 0, previous folder, or media folder. For some reason it won't find the update. I have tried everything I can think of, also using a different usb drive. Please help.

    Quote
    It won't let me install Windows 7 or XP
    What do you mean by that?
    Quote
    so I'm trying to use mflash
    Please avoid using Mflash for now... and lets sort out the first issue first, by answering the first question.
    Oh and please read the >>Posting Guide<<

  • Need help - Flash file wont open

    So, last night i made an awesome intro for my newest videos, and i finished it last night.I closed adbobe flash and went to bed.
    This morning, i wanted to edit it some more.But it didn't open.
    It said "Adobe Flash CS5.5 has stopped working.Windows is checking for a solution"
    After like 30 seconds it says
    "A problem caused the program to stop working correctly.Windows will close the program and notify you if a solution is available."
    This never happen to any other fla files with me?Why this 1.
    I put the download below, if you want to see it.
    Click This: Intro.fla

    it said the same think
    Ahhh. "QuickTime Player has encountered a problem" is one of the possible messages in this sort of context.
    So let's first try swapping out your QuickTime.
    Head into your Add/Remove programs. uninstall QuickTime.
    Next, we’ll manually remove any leftover program files and folders.
    1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
    2. In My Computer, open Local Disk.
    3. Open Program Files.
    4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
    5. Navigate to C:\Windows\system32\.
    6. Remove the files QuickTime.qts and QuicktimeVR.qtx. (If “Hide filename extensions for known file types” is enabled on the PC, then those two files will appear as “QuickTime” and QuickTimeVR”.)
    7. Restart your computer.
    Next, we'll get a fresh copy of QuickTime into your PC by doing a repair install of itunes.
    Switch off antivirus and antispyware applications prior to the repair install.
    Go into Add/Remove and select itunes. Click "Change" and then click "Repair".
    If the repair install goes through okay, restart the PC and try launching itunes again. Does it launch properly now?
    (If you get an error message on the QuickTime uninstall or the iTunes repair install, let us know what it says.)

  • Need help flashing my BIOS

    I just tried to flash the BIOS on my MSI Z87-G43 mb but I was unsuccessful.  I was trying to use the M-Flash capability in the BIOS but when I tried to save my current BIOS to the USB flash drive I got the message that no USB key was found and to please plug in a USB key and try again.  I decided to skip saving the current BIOS and just flash the new BIOS and the same message appeared.  I tried the USB socket on the front of my case, the USB 2.0 socket on the MB I/O panel and the USB 3.0 socket on the MB I/O panel. None of them worked.   
    The USB flash drive is just a generic 1 GB flash drive.  Prior to the attempts, I used the option to "Load Optimized Defaults" or whatever it is called.  Within the BIOS, I used the "Board Explorer" option and I was able to "see" my USB flash drive on the Board Explorer.
    What is the trick to getting the MB to see my USB flash drive during M-Flash?

    Quote from: Froggy Gremlin on 30-July-13, 04:14:45
    Never known that to happen before. Here is a possible recovery method;
    https://forum-en.msi.com/index.php?topic=138837.0
    I went to that thread but when I clicked on the link for the repair tool, it returned a 404 error.
    Thanks again, Froggy!

  • I need help flashing bios

    hi how to update flash bios? it is safe?
    i already download at the lenovo driver page.
    i don't have dvd drivers
    btw is g460
    Solved!
    Go to Solution.

    if issue doesn't persist with windows media player, try to re-install k-lite.

  • NEED HELP..MSI {6712} KT4v-L bios 1.9

    First i need help flashing my bios i have 1.8 now
    and want 1.9. I am useing xp pro fully updated on an ntsf file format i have no floppy never needed i have a usb 64meg thumb drive . I do not overclock ever ....
    I have read several places how to do this but all are a little different so i decided to ask the real pro you guys.
    would some one give me a full very detailed description on how i can do this preferbally soemone who has run into the same situation i have any help would be much appreciated.
    MSI KT4V-L {6712}
    AMD 2400+ {266}
    PNY 256 DDR {333}
    PNY 5200 DDR FX 128
    Creative Audigy 2 Platinum
    Sony 16X DVD
    Sony DVD-+RW-+
    Creative Labs MegaWorks THX 6.1 600 watts
    Antec Lanboy
    Antec 300 True Power
    Thermaltake 3 speed intake
    Thermaltake 3 speed exhaust

    i had exactly the same problem  - na floppy ever needed
    1. burn a cd with ami flash or other flash program and your bios file
    2. boot the system with your ( in my case windows 98 se ) cd
    3. choose to boot with cd-rom
    4. run amiflash from your burned cd
    5. enjoy !!

  • Need help with coding for HTML5 Video with Flash fallback

    Hello, need help with my coding in Dreamweaver CS5.5 for HTML5 video with Flash fallback. Not sure if the coding is correct. Do I need anything else Javascipt etc?

    The reason you see a blank page is because it's trying to load the file that is pretty humungous and there is no preloader. So, you see a white screen till it complets loading.
    Also, the reason why its loading a SWF file and not any of HTML5 type video is because your doctype declaration is XHTML1.0 and not HTML5.
    Change the 1st line in your .html file from:
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    to:
    <!DOCTYPE html>
    Then see if your HTML5 video types load with <video> tag.

  • I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

    I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

    Hold down the Option key while you boot your Mac. Then, it should show you a selection of devices. Click your flash drive and it will boot from that.

Maybe you are looking for