Need help Flashing to MSI's new Bios revsion for the MSI GT70 0NC

MSI just came out with a new bios revision for the MSI GT70 0NC I was wanting to know which bios revision is for my MSI notebook?

Hello again my friend, yes it's me again. Here's a screenshot from our last bios flash you helped me out with. Remember I have Windows 8 and still used the MSI flashing tool because I have the older MSI GT70 0NC So I was wanting to know which of the new ones I can obtain and download for my notebook again.

Similar Messages

  • Need help FLASH not launching and not uninstalling "licensing for this product has stopped working".

    Need help FLASH not launching and not uninstalling "licensing for this product has stopped working" and " you can only install one adobe product at a time please complete the other installation"  Flash was working absolutely fine before, I have no idea why this happened.

    I am having similar problem.  Can't open any of CS3 programs after trying to download Dreamweaver Trial, which wouldn't work because "couldn't remove DLM extention" error message.  So now I can not run Illustrator, Photoshop, or even Adobe Reader.  These are properly licensed for about a year. I get "License for product has stopped working".  Have 2 pending cases open with Adobe support (one for Dreamweaver trial, one for license problem) since 8/3 with NO ANSWERS - It says answers within 1-3 business days.  Was on phone support hold today for over 3 hours before line went dead with no help.  What is up with adobe support?  Can anyone help?

  • BIOS Update for the MSI GTX670 Power Edition Card

    There is a Bios update for the MSI GTX670 PE video card but it's for a hybrid card. What is meant by a hybrid card and how do I know if this applies to my video card? Any help would be appreciated in advance. Thank you. I do know that I can't for some reason or another install the Msi Update program for this card. It keeps saying that you have to be the administrator and Iam the administrator on my system. I do not understand.

    You can use windows version of it to flash it:
    >>Download NVFLASH for windows<<
    syntax from cmd:
    nvflash -4 -5 -6 myrom.rom [ENTER]
    where myrom.rom will be your vbios file

  • BETA BIOS Releases for the MSI 870A-G54 Mainboard [MS-7599 PCB v3.1/4.0]

    The latest BETA Release for the MSI 870A-G54 Mainboard is currently: A7599AMS.HE3 [=v17.14b3].
    Changelog:
    A7599AMS.HD0 [v17.13] ---> A7599AMS.HE3 [v17.14b3]
    - Add new bom
    - Fix the raid function fail.
    - Fixed CPU Frequency display error in CPU Specifications.
    - Fixed HDT45TWFK6DGR,HDT65TWFK6DGR,ADX640WFK42GR adjust cpu ratio error.
    - Fixed the current CPU frequency information incorrect in Cell Menu group when update to AGESA Orochi 0.0.7.5.
    - Fixed AM3+ CPU ratio error under CPU-Z information.
    Please note that flashing this release occurs entirely at your own risk! >>Use the MSI HQ Forum USB flasher<<, Method II for best results.

    E7676IMS.163 --> E7676IMS.164
    * Adjust Lowest GT Ratio for different CPU.
    * Fix OC menu can't select down(when OC Genie Button Operation Enabled).
    * Fixed clear CMOS POST1 CPU Speed:0*31=0MHz.
    * Fixed Intel SNB Q0 CPU (Q1CX/QAQC) can't boot & S3/S4 fail.
    E7676IMS.164 --> E7676IMS.165
    * Update Memory Initialize Reference Code to version:1.2.2.00
    * Add U-key function support USB3.0
    * Fix the issue when Onboard LAN controller is set to Disabled then PCI LAN option rom does not appear under DOS mode.
    * Hide the item "Super IO Chip".
    E7676IMS.165 --> E7676IMS.166
    * Remove USB3.0 Legacy Mode Support item.
    * Fix Resume From S3/S4/S5 by PS/2 Mouse/KB issue.
    E7676IMS.166 --> E7676IMS.160
    * Release MP BIOS.
    E7676IMS.160 --> E7676IMS.171
    * Fixed with Intel RAID mode built in HDD larger than 2.2TB can't finish Win7 installation issue.
    * Fixed UKEY compatible issue.
    E7676IMS.171 --> E7676IMS.172
    * Fixed default DRAM voltage incorrect issue when used low voltage memory.
    * In order to unify the spec, Change String "CPU Min.Fan Speed(%)" to "CPU Min.Fan Speed" and change its values(ex: 62.5 -> 62.5%).
    * Remove extra Solution for Fixed with Intel RAID mode built in HDD larger than 2.2TB can't finish Win7 installation issue.
    * CPU ratio shows 60/61/62/63 in BIOS info area, if "Adjust CPU ratio in OS" is enabled.
    E7676IMS.172 --> E7676IMS.173
    * Fix factory INT15 tool test Hang issue.
    * Fixed the BIOS Setup Green Power group volt information show N/A issue when use User Password.
    * Fixed OS device manager USB 3.0 device show yellow exclamation point when disable USB controller item.
    * Fixed the motherboard needs clear cmos after just can normal boot when under the S3 mode and turn off the Power.
    * Fixed the pcie gen2 speed change to pcie gen1 issue when the S3 resume after.
    Please note that flashing this release occurs entirely at your own risk! >>>Use the MSI HQ Forum USB Flasher<<< 
    Do Not use the BIOS/UEFI integrated M-Flash Routine.

  • Custom BIOS requested for the MSI GP60 2PE Leopard

    Hi,
    Is it possible to generate a BIOS update, for allowing the notebook to have 32 GB (2x16 GB) SODIMMs. It seems that the Memory Reference Code needs some adjustments to allow this. I got currently the MSI GP60 2PE Leopard (i7-4700HQ • 16 GB DIMM).
    The currently available modules are IMM2G64D3LSOD8A-B15E or the IMM2G64D3LSOD8A-C15E from Intelligent Memory.
    With kind regards,
    Roland

    nope, can't do such modifications

  • New BIOS Update for the Z61m Series

    Hi,
    I have a problem with the downloading of the new BIOS Update for above mentioned notebook. Lenovo provides the version 2.25, but only via BIOS utility (exe-File), although a link to bootable CD exists. Can anyone confirm this or can help me?
    Do anyone know a possibilty to contact lenovo/ibm in an easy way (not by contact form)? 
    Thanks in advance,
    AfterBurner 

    I have the same problem! Will try wit System Update!

  • Im new to the mac world and i have been trying to view some video clip i have received but cannot do so. Displayed is a msg which say i need adobe flash 11. or higher i have searched for the adobe flash play and have not found it to download. help pls

    Hi Mac family, Im new to Mac and Im having problems viewing some of my video attachments the msg I get is Adobe Flashplayer 11.0 or higher in needed. I have searched for this app but cannot locate it. please advise... 

    http://get.adobe.com/flashplayer/

  • Need a bios update for the MSI g45 gaming boot issue

    When i first start my system, I noticed that the board doesn't boot up correctly even if we set the main boot to be the hard disk. The system boot in the EUFI section not the hard disk. I had to use boot override function to choose the hard disk then the system will boot normaly to the hard disk. 

    This is a user to user forum. For any UEFI/BIOS modifications, MSI Technical needs to be informed. There are no UEFI/BIOS engineers here;
    https://forum-en.msi.com/index.php?topic=107326.0  >> How To Contact MSI <<
    In the boot sub-section, disable the devices you don't want to boot in the BBS properties, then set the boot order to nothing but the HDD with the OS on it. If this doesn't resolve it, then the alternate workaround is exactly what you did with the Override.

  • Need help to partition and format new hard drive for T400

    The HDD failed in my T400. I bought a new 1TB HDD and fitted it. The diagnostic software in the BIOS did a read and controller test (Passed). When I put the Windows XP disk in the CD reader, the setup started - then stalled at the "Windows setup" page. I thought the hard drive had a write problem but apparently it must be partitioned and formatted first, before Widows setup can commence. The thing is that I can't get to the option where Windows formats the drive. In old computers, there was always a partitioning option in the BIOS setup but in my T400, there doesn't appear to be any such option. The computer has 4GB RAM, the actual model is 2767-RV8.
    Does anyone have any suggestions how to get this up and running?
    One other question is - (assuming I can get the thing working) - Is there somewhere I can load the operating system on part of the hard drive where it can act as a fall back in case the operating system gets corrupted? - i.e. something that can't get attacked by malicious software?
    Thanks in advance for any assistance.
    Ian

    Hi irivlin,
    If you are trying to clean install XP, then you have to do following setting in BIOS first:
    Press F1 to BIOS, Config -> Serial ATA (SATA) -> change to "Compatibility"
    You can change XP partition only if you are doing clean installation, otherwise you have to use 3rd party to do it.
    For backup part, there are lots of choices in the market. You might consider using XP own backup function. Lenovo got a program called Rescue and Recovery can also do backup as well.
    How to use the Backup utility to back up files and folders in Windows XP Home Edition
    http://support.microsoft.com/kb/320820/en-us
    Rescue and Recovery® 4.23 by Lenovo
    http://support.lenovo.com/en_US/product-and-parts/​detail.page?&LegacyDocID=MIGR-76225
    Fred
    T61 + X201i

  • I purchased an airport Extreme from germany. I would like to know if I can use it in the USA, and would I need anything else apart from a new power cord for the same ?

    I purchased an Airport extreme from Germany to be used as a router. It worked very well over there and I plan to use it in the States. Now, since the power output is different in both USA and Germany, would I only need to buy a new power cord from USA ?

    The AirPort Extreme will run on 100-240 Volts and 50/60 Hz, so it will operate just about anywhere in the world as far as power goes, if you have the right power cord or AC wall adapter. A voltage converter is not needed.
    But, European wireless standards are different than the U.S., so you will need to avoid using Channels 12 and 13, which are not authorized for use in the U.S. Otherwise, things should operate OK.
    For all the details on wireless standards in different parts of the world, see this document:
    http://en.wikipedia.org/wiki/List_of_WLAN_channels

  • New BIOS request for the 290X Lightning

    Serial number: 602-V307-04SB1403018994
    Original vbios: dropbox.com/s/qoum85h4faq9shl/Hawaii.rom
    Thank you.

    You can use this: https://forum-en.msi.com/index.php?topic=179761.msg1295014#msg1295014

  • I need a new Bios for the MSI k7n2 L!!!!!!!!

    I need a new bios for the MSI k7n2 L, because i need more voltage for the MIcroprocesor and more voltage for the DDR.
    Anybody know if exist some bios BETA or something,
    And when MSI will release the New bios for this mother?
    Thank for respond
    Sory for my english
    N7.net | SebaS

    I hope you find one...(doubtlfully tho)....alot of people would like to have what you asked for......
    One question why do you feel you need more voltages?
    Is the system unstable?..........or do you just want to overclock more?

  • HT201269 hi i need help, i just go a new iPhone 5 and i want to put all my backed up stuff on, but it doesn't show on the list, how do i get all my stuff back and yes i did backup the old phone

    hi i need help, i just go a new iPhone 5 and i want to put all my backed up stuff on, but it doesn't show on the list, how do i get all my stuff back and yes i did backup the old phone

    Follow the explicit instructions in the article from which the thread was started and restore the device from the backup of the previous device.

  • I need help my iphone 5c has been on charge for 5 hours and still has not turned on past the charging symbol, what can i do? (baring in mind i got this phone 2 days ago brand new.)

    i need help my iphone 5c has been on charge for 5 hours and still has not turned on past the charging symbol, what can i do? (baring in mind i got this phone 2 days ago brand new.)

    Do you see a lightning bolt near the battery , Battery is charging (supposedly(  IF  not return to where  you purchased it  (also make sure that the charger is on)  if still not charging with lighting bolt bring it back

  • Hi,i have the new ipad 16gb it was working fine till i went to download te new i tunes and the apple mobile device recovery mode my windows pc cant find the software to download it i need help because my ipad wont work i only see the itunes en usb symbol.

    i have the new ipad 16gb it was working fine till i went to download the new itunes and the apple mobile device recovery mode my windows pc cant find the software to download it i need help because my ipad wont work i only see the itunes and usb symbol can anybody help me.

    Try these instructions:
    http://support.apple.com/kb/TS3281
    You may also have to go to the link in the bottom paragraph if the first page instructions do not work.

Maybe you are looking for

  • Getting weird error message when booting up our computer

    when booting up our iMac, we get a gray screen with an error message in 4 languages saying: "you need to restart your computer" upon restarting, we keep getting the same message. at the same time we noticed that the screen was very fuzzy... I re-star

  • SQLDeveloper can't generate an explain-plan when using "cube"

    If I want to create an explain-plan from the following statement, I get no explain-plan: SELECT 1 FROM   dual GROUP BY CUBE( 2, 2, 2, 2, 2, 2, 2, 2, 2 )If I now want to create an explain-plan again, I get the following message (and still no explain-p

  • Need to find the text of the fields and in which table it stores  IN   (Pm)

    Hi  ,         Just could any buddy let me know the field CALL_STATUS in transaction IP03 get stored . just help me out to fine the table where that gets stored . For refference u can fine the field in transaction IP03 In strip  schedule call item fie

  • Making custom non-standard components aware of custom look and feels.

    Hello all. Maybe the subject of this post could also be the opposite: "Making custom look and feels aware of non-standard custom components". I'm not sure. If I code a new custom component (extending JComponent, or extending the UI delegate of a stan

  • ICloud Control Panel Sync - Calendar only

    I use the iCloud facility in 1.6, to sync a shared icloud calendar with outlook on a desktop/laptop. This allows my wife and I to have a shared calendar.accessibleon the iPad's and the Windows machines we use.  The fantastic feature of 1.6 allowed me