Need help for BPM Process Task - Looping

Hi Folks,
    I need some info regarding Task Looping in a BPM Process.
Is there any code sample which mentions how to perform task looping and setting the context appropriately.
Thanks,
Brian.

Hi Brian,
Please find the below link for Multiple Looping
http://help.sap.com/saphelp_nwce72/helpdata/en/3d/786ec2dd1243c28aeffa4c1c70df25/content.htm
Regards
Srikanth

Similar Messages

  • Need Help for Image Processing

    Hi everyone,
    my name is Davide and I am a new member. I apologize in advance for my English that It's not very good.
    I have to do an exercise where I have to draw a SAR(Synthetic Aperture Radar) Image. The problem is that the input image is composed by a binary raster plus an XML parameters file. The XML file contains all the information to correctly read the image.
    I downloaded Java Advancing Imaging Library but I've never worked with this image format and I don't know where to start.
    Can anyone help me? How should i do with the binary raster file? How can i read it?
    Thank you very much.

    Hi everyone again,
    I followed your advice and I studied the theory on raster data so I have made some step forward. Now I have a new problem that I will try to explain you in the better way. I was able to obtain from the binary raster data an array of float.
    From the XML parameters file I know that the rows number are 1000, the columns number are 2000, the pixel type is complex float and that the real and imaginary parts are put side-by-side on a column basis. I created two array, one of the real parts and one of the imaginary parts:
    for (int i=0;i < SIZE_X*SIZE_Y; i++){
       if(i%2 == 0){
          real[k] = bin_input;
    if(Math.abs(real[k]) > max_value_re){
    max_value_re = Math.abs(real[k]);
    k++;
    }else{
    img[n] = bin_input[i];
    if(Math.abs(img[n]) > max_value_im){
    max_value_im = Math.abs(img[n]);
    n++;
    Then I create an array with the absolute value of complex number:for (int i=0;i < SIZE_X/2*SIZE_Y; i++){
    mag[i] = (float) (Math.sqrt(Math.pow(real[i]/max_value_re,2) + Math.pow(img[i]/max_value_im,2)));
    Now I have an array of float with values from 0 and 1. I tried to create a gray scale image because in the XML file it says that the number of channels is 1:BufferedImage theImage = new BufferedImage(SIZE_X/2, SIZE_Y, BufferedImage.TYPE_4BYTE_ABGR);
    WritableRaster wr = (WritableRaster) theImage.getData();
    wr.setPixels(0, 0, SIZE_X/2, SIZE_Y, mag);
    File outputfile = new File("C:\\Sviluppo\\workspace\\Java\\SAR\\Milano.png");
    try {
    ImageIO.write(theImage, "png", outputfile);
    } catch (IOException e) {
    // TODO Auto-generated catch block
    e.printStackTrace();
    The problem is that the image is all black as if the method is not able to interpret the float values and puts everything at zero.
    First of all, do you think the process can be right or is there some logical/theorical error? If it's ok, How can I fix the problem?
    Thank you.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • Need help for interface to process employee expenses

    need help for interface to process employee expenses
    i have used the interface tables as
    AP_INVOICES_INTERFACE
    AP_INVOICE_LINES_INTERFACE
    are they the right one
    is there a concurrent program or any API for doing interface

    hi,
    i think what ever table are using for interfacing expenses correct.
    but you have to enter invoice type as expense report.
    Regards,
    Srikanth

  • Calling ADF page Custom Listener (Ex: ActionListener) from BPM Process Task (APPROVE/REJECT)

    Hi All,
    Jdeveloper version - 11.1.1.7
    I am very new to BPM / SOA development, but I have very good development skills on ADF.
    I am not using ADF BC, using EJB for business services and also using custom ADF pages for HumanTasks.
    Usecase:
    From the BPM Process task, when process submission (APPROVE / REJECT) , I need to invoke a Custom listener (Ex.Action Listener - a EJB call) in the ADF page.
    I am trying to use BPM APIs.
    Please clarify me how this will achieve using BPM APIs. I need detail guidelines to do it. Please make to understand this process.
    Provide some useful documentation or links to understand the following:
    1. Custom Human task pages
    2. BPM APIs - 11.1.1.7
    3. Call a BPM process task from ADF Listener and Call a ADF Listener from BPM Process task - Using BPM APIs.
    Please revert more clarifications needed.
    Thanks and Regards
    Mohanraj N

    Hi Joonas.
    Plese let me explain me better for your understanding
    A big summary for what I meant it's the following:
    1- In the procces you made, when you add the HT activity, you have to implement it, this means declare the input(s) parameters you want. This implementation create the .task file.
    2- Create an application, and projects as HT you have. Each poject are based on the .task file, and automatically create a Data Control (for each project based on a .task) with all you need.
    This w'll be an empty application, so you can customize it all you want. The task selected should have all the parameters previously defined. Those parameters can change if you want.
    2- Create a page(s) in the task flow for the task implementation. You can even split the the payload of the task in differents pages, create your custom pages and any logic you need.
    3- An important aspect is how to match these application with the HT implemented in the process. It's possible, it's a configuration en the Enterprise Manager.
    4- Deploy your application
    All these are explain in the book I mentioned
    Th book you can find it here:
    https://blogs.oracle.com/soacommunity/entry/oracle_soa_suite_11g_handbook_1
    Regards Dariel.
    PS: Please, let me know if you need more details.

  • Show information for BPM process instances to possible future assignees

    Hi all,
    My environment is 11.1.1.4.
    I want to develop an ADF application that shows users information for BPM process instances which will possibly produce a user task assigned to them in the future.
    What I have done is
    1. Get BPMAppRole from the user name.
    2. Get the list of CompositeInstance with STATE_RUNNING from the BPM process name obtained from the BPMAppRole.getName().
    From the list of CompositeInstance, I have to extract the instances that will possibly produce a user task assigned to the user in the future.
    But I have no idea how to do this.
    Maybe my current approach is totally incorrect.
    Please help!
    Regards,
    Kenji

    Hi,
    By chance I found a method that you can use:
    oracle.bpel.services.workflow.query.model.TaskSequence getTaskSequence(oracle.bpel.services.workflow.verification.IWorkflowContext p1, oracle.bpel.services.workflow.task.model.Task p2, java.util.List p3, java.util.List p4, java.util.List p5, boolean p6) { }
    getTaskSequence might help you. This is under ITaskQueryService interface.
    HTH.

  • Need help for Transfer PO

    need help for Transfer PO.
    i need help for to transfer PO from one season to onther season. pleas ehelp me how to proceed and how 2 approach the process.
    if any code is there please provide  me

    follow the link
    it may help you
    MM SCENARIO
    https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=abapcodetotransferpurchaseorder&adv=true&sdn_author_name=&sdn_allusernamesofthread=&sdn_category=&sdn_forum=&sdn_updated_on_comparator=GE&sdn_updated_on=&sortby=cm_rnd_rankvalue
    reward if helpful
    Edited by: sharad narayan on Apr 8, 2008 3:16 PM

  • I have problem with buying in games , I got the massage that the purchased can not be completed , please contact iTunes support.. I need help for my case please

    I have problem with buying in games , I got the massage that the purchased can not be completed , please contact iTunes support.. I need help for my case please

    http://www.apple.com/support/itunes/contact/

  • Need help for Format HD

    Hi I need Help for Formating HD so Wat Key need hold on start up for format HD I apprciated you Help

    Jesus:
    Formatting, Partitioning Erasing a Hard Disk Drive
    Warning! This procedure will destroy all data on your Hard Disk Drive. Be sure you have an up-to-date, tested backup of at least your Users folder and any third party applications you do not want to re-install before attempting this procedure.
    • With computer shut down insert install disk in optical drive.
    • Hit Power button and immediately after chime hold down the "C" key.
    • Select language
    • Go to the Utilities menu (Tiger) Installer menu (Panther & earlier) and launch Disk Utility.
    • Select your HDD (manufacturer ID) in left side bar.
    • Select Partition tab in main panel. (You are about to create a single partition volume.)
    • _Where available_ +Click on Options button+
    +• Select Apple Partition Map (PPC Macs) or GUID Partition Table (Intel Macs)+
    +• Click OK+
    • Select number of partitions in pull-down menu above Volume diagram.
    (Note 1: One partition is normally preferable for an internal HDD.)
    • Type in name in Name field (usually Macintosh HD)
    • Select Volume Format as Mac OS Extended (Journaled)
    • Click Partition button at bottom of panel.
    • Select Erase tab
    • Select the sub-volume (indented) under Manufacturer ID (usually Macintosh HD).
    • Check to be sure your Volume Name and Volume Format are correct.
    • Click Erase button
    • Quit Disk Utility.
    cornelius

  • Need help for my requirement...

    Need help for my requirement...
    Hello Experts,
    I have report where users can input the company, housebank, account ID and posting date.
    Now in one column of my report named 'Cash in Bank', I need to get all postings from cash
    accounts with GL code ending in '0'. Now, I know that I can get the amounts in BSIS/BSAS
    but how do I link it with the proper bank and account?
    For example:
                       Cash in Bank
    Bank A
      Account ID 1     1,000,000
      Account ID 2     25,000,000
    Hope you can help me guys. Thank you and take care!

    hi Viraylab,
    each house bank you can find in table T012, in T012K you'll find the bank accounts to the housebank, the G/L account will be in T012K-HKONT.
    hope this helps
    ec

  • Need help for flash builder

    i need help for flash builder 4 and papervison 3d. I need to create a slider with it ranges of value from 10 to 50 to adjust the camera values for the camera.fov and also need to create it for the yaw of the object from 0 to 360. I try to look for any slider event and classes in this program but cant find any, btw, i need to use the AS only project file.
    here is my codes:
    can you please tell me how i should modify the codes?
    package
        import flash.display.BitmapData;
        import flash.display.Sprite;
        import flash.events.Event;
        import org.papervision3d.materials.BitmapFileMaterial;
        import org.papervision3d.materials.BitmapMaterial;
        import org.papervision3d.objects.primitives.Sphere;
        import org.papervision3d.view.BasicView;
        [SWF (width="800", height="600", backgroundColor="0x000000",frameRate="30")]
        public class EarthBitmap extends BasicView
            private var sphere:Sphere;
            public function EarthBitmap()
                super(800 , 600);
                var earthmaterial:BitmapFileMaterial = new BitmapFileMaterial("../assets/Earth.jpg");
                sphere = new Sphere(earthmaterial,100,20,18);
                camera.fov = 25;
                scene.addChild(sphere);
                addEventListener(Event.ENTER_FRAME,rotateSphere);
            public function rotateSphere(evt:Event):void
                sphere.yaw(0.2);
                singleRender();

    Turn the click handler into a full on separate function. Then store all the views in an array and use Math.rand() to randomly choose one.
    Something like this:
    <fx:Script>
         <![CDATA[
              var questionsArray:Array = {question2,question3,question5,questionRed,questionGeography};
              function buttonClickHandler(event:MouseEvent){
                   var randomProblem:int = Math.floor(Math.random()*(questionsArray.length));     //generates a random integer between 0 and the total number of questions in the array (arrays are 0-based)
                   navigator.pushView(questionsArray[randomProblem]);
         ]]>
    </fx:Script>
    <s:Button id="randomProblemButton" label="Next Problem" click="buttonClickHandler(event)" />
    Haven't tested that, but something along that line should work

  • Need help for importing oracle 10G dump into 9i database

    hi, Someone help me to import oracle 10G dump into 9i database. I'm studying oracle . Im using oracle 10G developer suite(downloaded from oracle) and oracle 9i database. I saw some threads tat we can't import the higher version dumps into lower version database. But i'm badly need help for importing the dump...
    or
    someone please tell me the site to download oracle 9i Developer suite as i can't find it in oracle site...

    I didnt testet it to import a dump out of a 10g instance into a 9i instance if this export has been done using a 10g environment.
    But it is possible to perform an export with a 9i environment against a 10g instance.
    I am just testing this with a 9.2.0.8 environment against a 10.2.0.4.0 instance and is working so far.
    The system raises an EXP-00008 / ORA-37002 error after exporting the data segments (exporting post-schema procedural objects and actions).
    I am not sure if it is possible to perform an import to a 9i instance with this dump but maybe worth to give it a try.
    It should potentially be possible to export at least 9i compatible objects/segments with this approach.
    However, I have my doubts if this stunt is supported by oracle ...
    Message was edited by:
    user434854

  • Need Help for Nokia 6500 slide

    Hi all I'm A new Guy here ,
    But I do really need help for hard reset my phone
    I already try *#7073# But It doesn't work ,
    If Anybody know to make a hard reset please help

    rwss wrote:
    I'v got te same problem with my 6500 Slide, is there a button combination that we have to press
    to hard reset the 6500 Slide?!
    How does the 6500 slide hard reset?
    That's simple.
    All you have to do is:
    From MENU goto SETTINGS, When there scroll down and select 'Restore Factory Setting'.
    There are two options in there:
    "Restore Settings only"
    and
    "Restore all"
    Select "Restore All"
    When done the phone will delete every thing on the Phone memory(C:\)(contacts,picture,messages etc)
    and also restore phone to its original settings and will restart.
    This proceedure is mostly common on S40 phone.
    Hope this explain and solve the problem.

  • Need help for publishing web intelligence document (universe) into InfoView

    Post Author: mirage
    CA Forum: Publishing
    Hello all,
    I need help for publishing web intelligence document (universe) into InfoView.
    can't find this information in Business Objects Designer's Guide and in Business Objects Administrator Guide.
    Can somebody give short instructions how can I do it?
    Regards, Slava

    If the change between the 2 types of data has to happen dynamically during run time them
    1. Use 2 dataproviders
         a. Current
         b. Historic
    2. Merge the 2 dimensions
    3. Use Webi variable to switch between the measure of the current and historic universe
    Ex  if [year] < 2010 then historic.[expense] else current.[expense]
    Hope this helps,
    Divya

  • Need help for access list problem

    Cisco 2901 ISR
    I need help for my configuration.... although it is working fine but it is not secured cause everybody can access the internet
    I want to deny this IP range and permit only TMG server to have internet connection. My DHCP server is the 4500 switch.
    Anybody can help?
             DENY       10.25.0.1 – 10.25.0.255
                              10.25.1.1 – 10.25.1.255
    Permit only 1 host for Internet
                    10.25.7.136  255.255.255.192 ------ TMG Server
    Using access-list.
    ( Current configuration  )
    object-group network IP
    description Block_IP
    range 10.25.0.2 10.25.0.255
    range 10.25.1.2 10.25.1.255
    interface GigabitEthernet0/0
    ip address 192.168.2.3 255.255.255.0
    ip nat inside
    ip virtual-reassembly in max-fragments 64 max-reassemblies 256
    duplex auto
    speed auto
    interface GigabitEthernet0/1
    description ### ADSL WAN Interface ###
    no ip address
    pppoe enable group global
    pppoe-client dial-pool-number 1
    interface ATM0/0/0
    no ip address
    no atm ilmi-keepalive
    interface Dialer1
    description ### ADSL WAN Dialer ###
    ip address negotiated
    ip mtu 1492
    ip nat outside
    no ip virtual-reassembly in
    encapsulation ppp
    dialer pool 1
    dialer-group 1
    ppp authentication pap callin
    ppp pap sent-username xxxxxxx password 7 xxxxxxxxx
    ip nat inside source list 101 interface Dialer1 overload
    ip route 0.0.0.0 0.0.0.0 Dialer1
    ip route 10.25.0.0 255.255.0.0 192.168.2.1
    access-list 101 permit ip 10.25.0.0 0.0.255.255 any
    access-list 105 deny   ip object-group IP any
    From the 4500 Catalyst switch
    ( Current Configuration )
    interface GigabitEthernet0/48
    no switchport
    ip address 192.168.2.1 255.255.255.0 interface GigabitEthernet2/42
    ip route 0.0.0.0 0.0.0.0 192.168.2.3

    Hello,
    Host will can't get internet connection
    I remove this configuration......         access-list 101 permit ip 10.25.0.0 0.0.255.255 any
    and change the configuration ....      ip access-list extended 101
                                                                5 permit ip host 10.25.7.136 any
    In this case I will allow only host 10.25.7.136 but it isn't work.
    No internet connection from the TMG Server.

  • Need help for cenvat reversal

    Hi Friends,
    Need help for cenvat reversal.
    Reversed MIRO by MR8M & MIGO by 102 movement but not able to post & cancel cenvat by J1IEX.
    In table J_1IEXCHDR status = "P" and J1I5 does not update for document of 102 movement because reversal document of MIGO, i.e. material document with 102 movement type does not have excise tab. MBSM-Cancelled Material Documents, does not show any of the material documents.
    Want to reverse the cenvat credit, please help.
    --Anil Bhamere

    Hi,
    If I select Cancellation in MIGO then there is only Material Document option.
    In MIGO Purchase Order option shows for Goods Receipt, Goods Issue and Subsequet Adj.
    In this case I have been selected Goods Receipt option followed by purchase order number by which original goods receipt MIGO was created, selected 102 movement type and from line item respective MIGO document. The reversal document created successfully where as original MIGO document does not show in cancelled document list. When post option selected from J1IEX and entered vendor excise number then message appeared as No Part I exists for availing credit in excise invoice xxxxx.
    If Cancel option selected from J1IEX and entered vendor excise number then message appeared as Excise invoice xxxx has already been posted for vendor xxxxx.
    Please help.
    Regards,
    Anil Bhamere

Maybe you are looking for