Need Help for connectivity USB Cable Nokia 5800 ca...
Hi All,
I really need help to solve my problems. I just bought nokia 5800 XM last week. I already installed the CD software in my windows XP, but it seems that PC cannot recognize the USB cables. I have plug in an unplugged... At firstime it detects my nokia 5800 XM, but when I open PC suite or OVI, it doesn't connect the USB cables into PC. I already install and uninstall The OVI suite but it is still the same, when I try it in OVI suite to detect my phones, it doesn't react.... I also have download from Nokia website to install manually Nokia USB cable driver for my cable type CA-101... it seems nothing works here... tell me what should I do? I don't think that the USB cable I bought is fake, it has original guarantee..... please desperately need help! Anybody?
When you plug the phone into the computer, ON THE PHONE it should ask you which mode to connect in, and you should select "PC Suite" mode. Does this happen?
Ravi
Similar Messages
-
Need help on connecting USB: 300GB external hard drive to wireless router
Hello,
I am trying to connect USB2.0 Maxtor 300GB external hard drive to my wireless router. Tried using Linksys new product NSLU2 which allows any USB cable external hard drive to NSLU2 device/network storage hub and then connect this NSLU2 directly to wireless router with the help of 10/100 Ethernet cable which allows to access external hard drive wirelessly.
Unfortunately Linksys NSLU2 is designed to supports USB external drives up to 250GB only.
Can any one advice me if there is any device I can use to connect my external hard drive to wireless router and access files without connecting/carrying USB external drive?
Any help is greatly appreciated.
Thanks in advance!
ArvindHave a look at http://www.ximeta.com and their solutions. Especially
http://www.ximeta.com/web/products/ndenclosure1_en.php might be interesting, as you already have a HD.
Regards, Martin -
Need help for connecting internet in solaris 10
Hello ,
I am new to Sunsolaris, recently i installed solaris 10 in my HP laptop. In my lap vista is the host and i installed Virtual box 3.0. Inside virtual box i installed solaris. My problem is not able to connect to internet. Iam using a wireless modem for connecting internet which is configured in vista. Solaris is not identifying wireless modem. Virtual box host adaptor is the ethernet iam using. I want to connect solaris to vista and access the internet( i have a guest open suse Linux in my lap, this is able to connect to internet through vista) can anybody give me a solution to get internet in solaris(ie through vista)
BijuHi,
What is the gateway used by Solaris. Please send the result of ifconfig -a on the Sun OS.
Sunil. -
Need help for connecting Ms Acces with java Swing in Mac OS
Hi all,
i need to connect to Ms Access in MAc os through my java swing program.
Is it possible for accessing Ms access through dsn in Mac OS.
If Possible which driver shall i use for Establishing Connection with MS Access in Mac OS.
Suggestion is needed urgently.
Can anybody help me out regarding this..
Thanks in advance.
Regards,
sreandif I don't find a better solution I'll try your 2nd option but what do you mean by "combo" update?
My understanding is to simply insert the OS 10.5 installation CD, reinstall the OS and the just keep updating it via the OS SSoftware update panel and stop untill I see the scary Java 8 update. Is that what you meant?
While you can do it that way, the combo update picks up operating system updates through a collection of releases. When dealing with operating system upgrades, I've found using the combo updates to be more reliable than Software Update, as sometimes Software Update doesn't apply updates correctly, and weird things can happen. Doesn't happen often though, thankfully.
So the OS X 10.5.5 Combo update contains all updates between 10.5.0 and 10.5. The 10.5.8 combo update contains the updates from 10.5 thru 10.8. Here are the updates:
10.5 combo update: http://support.apple.com/kb/DL692
10.8 combo update: http://support.apple.com/kb/DL866
If you go down the combo path, repair permissions before and after doing each update. Then do Software Update for any other non-OS X updates, and don't apply the Java Update 8. -
Need help for connection problem
When I try to run JdbcCheckup.java, I get following problem:
password: tiger
database(a TNSNAME entry): myhost:1521:orcl
Connecting to the database...Connecting...
Exception in thread "main" java.sql.SQLException: Io exception: The Network Adap
ter could not establish the connection
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:114)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:156)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:269)
at oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java:212)
at oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.ja
va:251)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:224)
at java.sql.DriverManager.getConnection(Compiled Code)
at java.sql.DriverManager.getConnection(DriverManager.java:137)
at JdbcCheckup.main(Compiled Code)
I'm very appreciated for everybody's help
nullThis example can be run without specifying a TNSNAME connection string, as the oci8 jdbc driver will default to the localhost. OR - Specifying the only the TNSNAME is required, i.e. edit %ORACLE_HOME%\network\ADMIN\TNSNAMES.ORA file and locate the XXXXX.WORLD entry in the file. This is the TNSNAME entry referred to.
Try re-running this as follows (with no TNSNAME entry at all):
%ORACLE_HOME%\jdbc\demo\samples\oci8\basic-samples> java JdbcCheckup
Please enter information to test connection to the database
user: system
password: manager
database (a TNSNAME entry):
Connecting to the database...Connecting...
connected.
Hello World
Your JDBC installation is correct.
null -
I need Help for Connect To DB2 with JDBC
I'd like to know why I Have this problem.
The DB2 v 5.10 is in a IBM OS/390
I know the IP, PORt, DBNAME and I'd like to connect to DB2 with my windows XP using JDCB from IBM.
I use JDBC Universal for DB2 type 4.
Class.forName("com.ibm.db2.jcc.DB2Driver");
Url = "jdbc:db2://IP:PORT/BDNAME";
DriverManager.getConnection.... (url, user, pass)..
If I execute this, I have next problem
SQL state = null
Error code = -4499
There is no available conversion for the source code page, 1208, to the target code page, "". DB2ConnectionCorrelator: null
Why is this?
Finally, the web application will running in a AIX IBM with machine, It could be that this machine (aix) can connect with the IBM OS/390 with JDBC for iBM?
Thankss!!!Check how you configured the IP on the laptop and computers, assigned by router with DHCP feature enabled? Or configure manually? If it's assigned by wireless router, then make sure you assign big enough IP range in DHCP setting. Take a look on using ping to troubleshoot network and wireless router configuration articles to help you more..
-
Need help with connecting internal cables
I opened up my iMac to install a new superdrive and I am having trouble finding where 3 cables go. One cable comes from the internal camera One comes from the monitor and the third one is from a card . The first 2 are pins and the third one is a rounded plastic connector. Any ideas.
If this iMac is from 2001, it is probably not an iMac G5. This forum category is for the iMac G5. So can you confirm the type of iMac. 2001 would probably make it a slot-loader iMac G3.
Your options will depend on the type of iMac you have. -
Need help for connecting in an RSA authentication agent
i am not sure if this is the right place but i was hoping i am lucky enough for someone with knowledge about rsa or somebody who has experience in developing security pages.
my problem is something like this, simple, how do i connect to an RSA Authentication Agent, or RSA Authentication Manager.
i was hoping you could paste an answer or paste an web address of a forum.
this kind of question is very rare in forums, so i don't really have much choice. any relevant answers are appreciated...
thank youHi,
What is the gateway used by Solaris. Please send the result of ifconfig -a on the Sun OS.
Sunil. -
i cant connect my iphone to laptop. its nither charging nor connecting usb cable is okay .... can any one help ?? pls...
BOB we need you urgently
Perhaps Bob will see this thread, he is the professor in these cases.
You do not use a WEP password but wpa/wpa2 on router and equipment.
All equipment connects to WiFi, but for your iPad.
Even with all other equipment WiFi off, you cannot connect your iPad.
Your iPad connects to other WiFi nets correctly.
All resets etc done on iPad and Router.
Still I am not sure it is your router for sure, frustrating...
I want to test 2 other things:
1. in your iPad, set everything OFF in Settings/Cellular, turn off/then/on your WiFi, and see whether it will still not connect...
2. If that does not do it: disconnect the router as well as the modem from the power, for 15 seconds, then reconnect the modem, let it fully start, then reconnect the routet let it fully start, turn of your WiFi in iPad, then on, and see whether it will connect. -
Nokia N8 - Connect USB cable to device
My new nokia N8 is constantly coming up with the message "connect usb cable to device".
I'll click ok and 2 minutes later it will reappear.
When i connect it to a usb, it disappears but will then reappear when i unplug. I've tried updating software but none is available, and there is no programs running on the phone.
When i turn off and on i still get the same problem.
Anyone know of a solution before i throw it against the wall?vvaino wrote:
Ok,
Have you tried the trick you can find from the phone's
manual; long press the on/off button (for 8-10 sec) until the
phone vibrates three times? With this, you don't lose any
of your information.
-vvaino
That's barely a trick
it just kills the power to the phone and is esentialy the same as using the on off switch
anyway as to the OP don't know
you could try resseting the device type *#7370# into the dialer,
this will restore the phone to an out of box stateand you will loose all of your settings
see if that helps -
by i need help for my photoshop connective..if you ceck problem please.
Does your Cloud subscription properly show on your account page?
If you have more than one email, are you sure you are using the correct Adobe ID?
https://www.adobe.com/account.html for subscriptions on your Adobe page
If yes
Some general information for a Cloud subscription
Cloud programs do not use serial numbers... you log in to your paid Cloud account to download & install & activate... you MAY need to log out of the Cloud and restart your computer and log back in to the Cloud for things to work
Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
-Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
-http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
-http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
-ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp
If no
This is an open forum, not Adobe support... you need Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us" -
Need Help for Nokia 6500 slide
Hi all I'm A new Guy here ,
But I do really need help for hard reset my phone
I already try *#7073# But It doesn't work ,
If Anybody know to make a hard reset please helprwss wrote:
I'v got te same problem with my 6500 Slide, is there a button combination that we have to press
to hard reset the 6500 Slide?!
How does the 6500 slide hard reset?
That's simple.
All you have to do is:
From MENU goto SETTINGS, When there scroll down and select 'Restore Factory Setting'.
There are two options in there:
"Restore Settings only"
and
"Restore all"
Select "Restore All"
When done the phone will delete every thing on the Phone memory(C:\)(contacts,picture,messages etc)
and also restore phone to its original settings and will restart.
This proceedure is mostly common on S40 phone.
Hope this explain and solve the problem. -
pls i need help for this simple problem of my palm os zire 72. pls share your ideas with me.... i tried to connect my palm os zire72 in my desktop computer using my usb cable but i can't see it in my computer.. my palm has no problem and it works well. the only problem is that, my desktop computer can't find my palm when i tried to connect it using usb cable. is thier any certain driver or installer needed for it so that i can view my files in my palm using the computer. where i can download its driver? is there somebody can help me for this problem? just email me pls at [email protected] i really accept any suggestions for this problem. thanks for your help...
If you are using Windows Vista go to All Programs/Palm and click on the folder and select Hot Sync Manager and then try to sync with the USB cable. If you are using the Windows XP go to Start/Programs/Palm/Hot Sync Manager and then try to sync. If you don’t have the palm folder at all on your PC you have to install it. Here is the link http://kb.palm.com/wps/portal/kb/common/article/33219_en.html that version 4.2.1 will be working for your device Zire 72.
-
Kernel Panic when I connect USB cable to use Rane Serato SL3
Connect USB cable to use Rane Serato SL3 causes the following kernel panic. Used cable is an 5 meter USB-2 cable. This is 100% reproducable.
Yes yes I know Rane does not officially support Mavericks yet however if I use another (shorter) USB-2 cable with the Rane Serato SL3 it's no problem. I also have an older Rane Serato SL1 and this device works (USB-1) perfect with the same 5 meter USB-2 cable and the same short USB-2 cable.
I've taken the liberty to ask Rane what's going on and no succes there. They just don't seem to know.
So you smart people over here, what's going on?
Here is the Kernel Panic:
Anonymous UUID: 944C81E9-22DD-96FF-FD1A-553E9CAD6B34
Sat Nov 2 20:34:06 2013
panic(cpu 4 caller 0xffffff800b8dc19e): Kernel trap at 0xffffff7f8debe166, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000000, CR3: 0x000000000e538000, CR4: 0x00000000000606e0
RAX: 0x00000000e0000200, RBX: 0xffffff8025405000, RCX: 0xffffff800bf024b0, RDX: 0xffffff802d0add08
RSP: 0xffffff80fcbc3d80, RBP: 0xffffff80fcbc3da0, RSI: 0x00000000000a0014, RDI: 0x0000000000000000
R8: 0x0000000000000051, R9: 0xffffff800be01910, R10: 0x00000000000003ff, R11: 0xffffffffffffffff
R12: 0xffffff801ecc1800, R13: 0xffffff802d0add00, R14: 0xffffff8025405000, R15: 0xffffff7f8debe200
RFL: 0x0000000000010246, RIP: 0xffffff7f8debe166, CS: 0x0000000000000008, SS: 0x0000000000000000
Fault CR2: 0x0000000000000000, Error code: 0x0000000000000000, Fault CPU: 0x4
Backtrace (CPU 4), Frame : Return Address
0xffffff80fcbc3a10 : 0xffffff800b822f69
0xffffff80fcbc3a90 : 0xffffff800b8dc19e
0xffffff80fcbc3c60 : 0xffffff800b8f3606
0xffffff80fcbc3c80 : 0xffffff7f8debe166
0xffffff80fcbc3da0 : 0xffffff7f8debee0f
0xffffff80fcbc3dc0 : 0xffffff7f8c13aadc
0xffffff80fcbc3df0 : 0xffffff7f8debe2a9
0xffffff80fcbc3e00 : 0xffffff7f8c13aa20
0xffffff80fcbc3e30 : 0xffffff7f8c139634
0xffffff80fcbc3e60 : 0xffffff7f8debbaf4
0xffffff80fcbc3ea0 : 0xffffff800bcae4b3
0xffffff80fcbc3f00 : 0xffffff7f8debaa62
0xffffff80fcbc3f20 : 0xffffff800b84a15a
0xffffff80fcbc3fb0 : 0xffffff800b8d6aa7
Kernel Extensions in backtrace:
com.apple.iokit.IOAudioFamily(1.9.4f11)[5077FB4F-0903-3D79-8280-5B2341E93BF3]@0 xffffff7f8c135000->0xffffff7f8c163fff
dependency: com.apple.kext.OSvKernDSPLib(1.14)[744516ED-C05D-340F-9867-F5E89B2E8BE5]@0xffff ff7f8c124000
com.rane.driver.sl3.10.6(1.3.3f1)[46AEB5AC-AD52-3F5C-9927-59ABE444B435]@0xfffff f7f8deba000->0xffffff7f8dec5fff
dependency: com.apple.iokit.IOAudioFamily(1.9.4fc11)[5077FB4F-0903-3D79-8280-5B2341E93BF3]@ 0xffffff7f8c135000
dependency: com.apple.iokit.IOUSBFamily(650.4.4)[972D3024-AF9C-3E09-A9EC-D9AB2A559B38]@0xff ffff7f8c19a000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
13A603
Kernel version:
Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
Kernel slide: 0x000000000b600000
Kernel text base: 0xffffff800b800000
System model name: MacBookPro8,2 (Mac-94245A3940C91C80)
System uptime in nanoseconds: 431507508429846
last loaded kext at 426057833798866: com.sophos.kext.sav 8.0.14 (addr 0xffffff7f8dec6000, size 24576)
last unloaded kext at 426034845418472: com.sophos.kext.sav 8.0.14 (addr 0xffffff7f8dec6000, size 20480)
loaded kexts:
com.sophos.kext.sav 8.0.14
com.rane.driver.sl3.10.6 1.3.3f1
com.regularrateandrhythm.driver.RowmoteIREmu 1.0
com.eltima.ElmediaPlayer.kext 1.58
com.Cycling74.driver.Soundflower 1.6.6
com.serato.usb.kext 2.3.0
net.osculator.driver.OSCulatorIOKit 2.1
com.squirrels.airparrot.framebuffer 3
com.squirrels.driver.AirParrotSpeakers 1.7
at.obdev.nke.LittleSnitch 4050
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.iokit.IOBluetoothSerialManager 4.2.0f6
com.apple.driver.AGPM 100.14.11
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AudioAUUC 1.60
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.kext.AMDFramebuffer 1.1.4
com.apple.driver.AppleHDA 2.5.2fc2
com.apple.driver.AppleMikeyDriver 2.5.2fc2
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.driver.AppleHWAccess 1
com.apple.AMDRadeonX3000 1.1.4
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.0f6
com.apple.driver.AppleMuxControl 3.4.12
com.apple.driver.AppleIntelHD3000Graphics 8.1.8
com.apple.driver.AppleIntelSNBGraphicsFB 8.1.8
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.kext.AMD6000Controller 1.1.4
com.apple.driver.AppleLPC 1.7.0
com.apple.driver.AppleMCCSControl 1.1.12
com.apple.driver.AppleThunderboltIP 1.0.10
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.driver.AppleIRController 325.7
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.iokit.SCSITaskUserClient 3.6.0
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.4.0
com.apple.driver.AppleUSBHub 650.4.4
com.apple.driver.AppleSDXC 1.4.0
com.apple.iokit.AppleBCM5701Ethernet 3.6.9b9
com.apple.driver.AppleFWOHCI 4.9.9
com.apple.driver.AirPort.Brcm4331 700.20.22
com.apple.driver.AppleAHCIPort 2.9.5
com.apple.driver.AppleUSBEHCI 650.4.1
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.0
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 216.0.0
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 216.0.0
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.kext.triggers 1.0
com.apple.iokit.IOSurface 91
com.apple.iokit.IOBluetoothFamily 4.2.0f6
com.apple.driver.DspFuncLib 2.5.2fc2
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOAcceleratorFamily 98.7.1
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.0f6
com.apple.driver.AppleGraphicsControl 3.4.12
com.apple.iokit.IOAudioFamily 1.9.4fc11
com.apple.kext.OSvKernDSPLib 1.14
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.AppleHDAController 2.5.2fc2
com.apple.iokit.IOHDAFamily 2.5.2fc2
com.apple.driver.AppleSMC 3.1.6d1
com.apple.kext.AMDSupport 1.1.4
com.apple.AppleGraphicsDeviceControl 3.4.12
com.apple.driver.IOPlatformPluginFamily 5.5.1d27
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IONDRVSupport 2.3.6
com.apple.driver.AppleSMBusController 1.0.11d1
com.apple.iokit.IOGraphicsFamily 2.3.6
com.apple.driver.AppleThunderboltDPInAdapter 2.5.0
com.apple.driver.AppleThunderboltDPAdapterFamily 2.5.0
com.apple.driver.AppleThunderboltPCIDownAdapter 1.4.0
com.apple.driver.AppleUSBMultitouch 240.6
com.apple.iokit.IOUSBHIDDriver 650.4.4
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBComposite 650.4.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.0
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.6.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.0
com.apple.driver.AppleThunderboltNHI 1.9.2
com.apple.iokit.IOThunderboltFamily 2.8.5
com.apple.iokit.IOUSBUserClient 650.4.4
com.apple.iokit.IOEthernetAVBController 1.0.3b3
com.apple.driver.mDNSOffloadUserClient 1.0.1b4
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IO80211Family 600.34
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOAHCIFamily 2.6.0
com.apple.iokit.IOUSBFamily 650.4.4
com.apple.driver.AppleEFINVRAM 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.10
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 21
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.8
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.pthread 1Most likely, one of these is the culprit.
com.sophos.kext.sav 8.0.14
com.rane.driver.sl3.10.6 1.3.3f1
com.regularrateandrhythm.driver.RowmoteIREmu 1.0
com.eltima.ElmediaPlayer.kext 1.58
com.Cycling74.driver.Soundflower 1.6.6
com.serato.usb.kext 2.3.0
net.osculator.driver.OSCulatorIOKit 2.1
com.squirrels.airparrot.framebuffer 3
com.squirrels.driver.AirParrotSpeakers 1.7
at.obdev.nke.LittleSnitch 4050
Boot into safe mode (restart holding down SHIFT key). If no KP, then disable these, reenable one at time to determine which. If KP, then most likely hardware related. Run the Apple Hardware Test suite, extended tests at least twice, followed by Rember. See
OS X About kernel panics,
Technical Note TN2063: Understanding and Debugging Kernel Panics,
Mac OS X Kernel Panic FAQ,
Resolving Kernel Panics,
How to troubleshoot a kernel panic, and
Tutorial: Avoiding and eliminating Kernel panics for more details. -
Need help for access list problem
Cisco 2901 ISR
I need help for my configuration.... although it is working fine but it is not secured cause everybody can access the internet
I want to deny this IP range and permit only TMG server to have internet connection. My DHCP server is the 4500 switch.
Anybody can help?
DENY 10.25.0.1 – 10.25.0.255
10.25.1.1 – 10.25.1.255
Permit only 1 host for Internet
10.25.7.136 255.255.255.192 ------ TMG Server
Using access-list.
( Current configuration )
object-group network IP
description Block_IP
range 10.25.0.2 10.25.0.255
range 10.25.1.2 10.25.1.255
interface GigabitEthernet0/0
ip address 192.168.2.3 255.255.255.0
ip nat inside
ip virtual-reassembly in max-fragments 64 max-reassemblies 256
duplex auto
speed auto
interface GigabitEthernet0/1
description ### ADSL WAN Interface ###
no ip address
pppoe enable group global
pppoe-client dial-pool-number 1
interface ATM0/0/0
no ip address
no atm ilmi-keepalive
interface Dialer1
description ### ADSL WAN Dialer ###
ip address negotiated
ip mtu 1492
ip nat outside
no ip virtual-reassembly in
encapsulation ppp
dialer pool 1
dialer-group 1
ppp authentication pap callin
ppp pap sent-username xxxxxxx password 7 xxxxxxxxx
ip nat inside source list 101 interface Dialer1 overload
ip route 0.0.0.0 0.0.0.0 Dialer1
ip route 10.25.0.0 255.255.0.0 192.168.2.1
access-list 101 permit ip 10.25.0.0 0.0.255.255 any
access-list 105 deny ip object-group IP any
From the 4500 Catalyst switch
( Current Configuration )
interface GigabitEthernet0/48
no switchport
ip address 192.168.2.1 255.255.255.0 interface GigabitEthernet2/42
ip route 0.0.0.0 0.0.0.0 192.168.2.3Hello,
Host will can't get internet connection
I remove this configuration...... access-list 101 permit ip 10.25.0.0 0.0.255.255 any
and change the configuration .... ip access-list extended 101
5 permit ip host 10.25.7.136 any
In this case I will allow only host 10.25.7.136 but it isn't work.
No internet connection from the TMG Server.
Maybe you are looking for
-
How to make a bootable backup on external hard disk?
Hi guys, I want to ask how can make a backup of entire C(windows) drive on my external hard disk.I tried using backup option in my transcend hard drive software but it gave me some errors..So I used backup option C:>properties and made a backup on my
-
Re: iTunes keeps opening by itself and starts playing music
I have something really strange going on. My iTunes keeps opening by itself and starts playing music. I cannot figure this out. I turned off the "Sync Via Wireless" on all my gadgets, but this continues to happen. This has woken me up in the middle o
-
Is there a way to retreve a username for sync without it beeing used on another computer?
''Duplicate post, continue here - [https://support.mozilla.com/en-US/questions/781915]'' I formatted my computer and guess what I forgot my username for sync so I can't retrieve my data not even my password... Is there a way to get my username back?
-
Call Reminder - PROBLEM please help
I showed my boss how to use call reminder on his cell phone and now everytime he leaves my office it reminds him to call me ... this should have only happened the one time he used it but his phone is now reminding him to call me everytime he leaves m
-
Any reason to not use MBP's SSD?
Is there any reason to not go with the SSD that comes with a MBP? Seems there isn't much in savings and performance over equivalent (after market) drives. I'm just wondering if it is really worth it...given Apple won't support it.