Need help for Data source 0CRM_TRPR_ATTR

Hello Friends,
We have 0CRM_TR info object and it contains attribute 0CRM_TR_ATTR ,Text 0CRM_TR_TEXT and Hier . For this attribute we are not getting multiple employee assigned to one territory, so SAP suggested us to use 0CRM_TRPR_ATTR data source.
I am using this and can able to see multiple employees at PSA level but when i load it into info object level its taking one employee. I don't want to use the option Compounding at info object level because this 0CRM_TR info object is using in Multi providers, cubes, infosets, ODS.
Please help me out how to get multiple employees at Info object level.
Thanks,
Devi.

Hi Adarsh,
Please check the infoobject 0CRM_MKTELM which will laod data from 0CRM_MKTELM5_ATTR.
Please go through following link.
Load Sequence - SAP for Utilities: Documentation for Solution Manager Content - SAP Library

Similar Messages

Need help for date calculation

I HAVE STRING COLUMN SAY "TIME_USED" WITH 'HOURS:MINS:SECONDS' (eg 153:29:41) FORMAT
I NEED TO CALCULATE IT TYPICALLY AND STORE IT IN SOME OTHER VARIABLE PLEASE CHECK;
--> (MINS.SECONDS)/60 ie (29.41)/60=0.4901
and concatinate this value to HOURS ie 153.4901
how to do this, i cant use like operator and get the data and do in one go for sql, can any one help me out
Regards
Naren

Like this
with t
as
select '153:29:41' str from dual
select trunc(hr+(mn/60),4) val
from (
select to_number(regexp_substr(str,'[^:]+',1,1)) hr,
to_number(regexp_substr(str,'[^:]+',1,2) ||'.'|| regexp_substr(str,'[^:]+',1,3)) mn
from t)

Need help for data extraction from table

Hi all,
i have a requirement where i need to identify fields PERNR,BEGDA,ENDDA,REASN,fmlan in table PA0672 .If all these field are identical for an employee in more than one record, then greatest value of REMAN field out of these records should be displayed only in output.
How would i go about it?
Thanks
Snehasish

select PERNR BEGDA ENDDA REASN REMAN
into table itab
from PA0672.
* delete all but the highest reman value for each pernr
sort itab by pernr reman descending.
delete adjacent duplicates from itab comparing PERNR BEGDA ENDDA REASN.

Lync monitoring Details reports are not getting opened, Getting SQL error like "Cannot impersonate user for data source 'CDRDB"

Hi,
Two month before, We have deployed Lync 13 set up with lync monitoring and archiving service enabled. After configuring we have the Lync monitoring and archiving services are working fine... few weeks back I have changed the Admin Password
of the Lync Setup. After that Lync Monitoring and Archiving services are not working.
when I try open Lync monitoring service from web UI,
http://localhost/ReportServer_LyncMonitoring/
Web UI is opening but Reports home page is not Accessible , Getting error Like
"An error has occurred during report processing. (rsProcessingAborted)
Cannot impersonate user for data source 'CDRDB'. (rsErrorImpersonatingUser)
Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
The user name or password is incorrect"
Please help me to trouble shoot this problem.
Thanks,
Rajarajan.D

Hi Rajarajan.D
You probably need to update the password against the CDRDB datasource in SSRS Report manager, take a look at this article: http://lyncme.co.uk/microsoft-lync-server-2013/cannot-impersonate-user-for-data-source-cdrdb-rserrorimpersonatinguser-error/
If this helped you please click "Vote As Helpful" if it answered your question please click "Mark As Answer"
Georg Thomas | Lync MVP
Blog www.lynced.com.au | Twitter
@georgathomas
Lync Edge Port Check (Beta)
This forum post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Need help for finding objects impacted by size change for an infoobject

hi all,
need help for finding objects impacted by size change
for xxx infoobject, due to some requirements, the size to be changed from
char(4) to char(10), in the source database tables as well as adjustment
to be done in BI side.
this infoobject xxx is nav attribute of YYY as well as for WWW
infoobjects. and xxx is loaded from infopkg for www infoobject load.
now that i have to prepare an impact analysis doc for BI side.
pls help me with what all could be impacted and what to be done as a
solution to implement the size change.
FYI:
where used list for xxx infoobject - relveals these object types :
infocubes,
infosources,
tranfer rules,
DSO.
attribute of characteristic,
nav attribute,
ref infoobject,
in queries,
in variables

Hi Swetha,
You will have to manually make the table adjustments in all the systems using SE14 trans since the changes done using SE14 cannot be collected in any TR.
How to adjust tables :
Enter the table name in SE14. For ex for any Z master data(Say ZABCD), master data table name would be /BIC/PZABCD, text table would be /BIC/TZABCD. Similarly any DSO(say ZXYZ) table name would be /BIC/AZXYZ00 etc.
Just enter the table name in SE14 trans --> Edit --> Select the radio button "Save Data" --> Click on Activate & adjust database table.
NOTE : Be very careful in using SE14 trans since there is possibility that the backend table could be deleted.
How to collect the changes in TR:
You can collect only the changes made to the IO --> When you activate, it will ask you for the TR --> Enter the correct package name & create a new TR. If it doesn't prompt you for TR, just goto Extras --> Write transport request from the IO properties Menu screen. Once these IO changes are moved successfully, then the above proceduce can be followed using SE14 trans.
Hope it helps!
Regards,
Pavan

ODBC call SQLDriverConnect for data source Server name failed: [ . Notify Customer Support.

Need help !
While running DS job through designer we are getting below error:
ODBC call <SQLDriverConnect> for data source <SErver name> failed: <[>. Notify Customer Support.
Additional notes:
1. Source and Target datastore are getting connected properly as i have imported table's definition using it.
2. Source and target data store pointing to SQL server 2008 R2 express edition DB (64 bit).
3. It seems like server machine has both 32bit and 64bit drivers installed on it. Please refer attached driverdetails.jpg file for more details.
Thanks

Hi did you referred this :
ODBC call <SQLDriverConnect> for data source <MyComputer\SQLServer2008R2> failed: <[Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied.>. Notify Customer Support.

Error while activationg BI content for BI admin cockoit for data sources

Hi all,
I am doing BI content activation for BI admin cockpit, from SPRO -- Activation of BI content of BI admin cockpit , i ran the activation but it got failed. The error message says:
DataSource 0TCTBWOBJCT_ATTR from source system BWQCLNT500 could not be activated
This error is coming for data sources :0TCTPRCSVAR_ATTR, 0TCTBWOBJCT_TEXT, 0TCTPRCSVAR_TEXT and 0TCTBWOBJCT_ATTR.
I have applied the sap note 1110642 , 1110641 . also ran the program RSSM_SHIPDVERS_CLEANUP but did not able to find these info packages for this data spurces:
0PAK_8K20VQGEBZRQXUE2PKWS90ZO8
0PAK_934GEKKIBBDKPVMVDJHVNPIMV
0PAK_99MQNPZISKNSNWKT9HF2CWPLK
0PAK_BFYU3MMMU2T2WOI50MXHCEH07
I also tried activating these data sources manually in BI content one by one , there alaso iam getting error :
Data source can not be actvatedm, troied in RSDS also by replicating but says there also that this data source does not exist in source system.
Due to this data sources iam geting problem inmy process chain..
PLease help .Pts wil be assigned.
Thanks and Regards.
Akash

First of all Rather than using SPRO to install Admin Cockpit, its better to install it from Business Content, else many of your existing InfoObjects would get overwritten and you would require to revert them back.
2ndly, check if these DataSources are available in your source system. While installing from Business Content, the system prompts to log in to source system interactively and would install the DataSources in teh source system if they are not there already.
Also check what versions are your Source Systems on. Older versions may not have the DataSources while the new concept of Admin Cockpit is available in BI7.0 which goes well with ECC.
Regards
Anujit Ghosh

REG:USER EXIT FOR DATA SOURCE 0HR_LSO_1

Hi ,
I have to write the enhancement ABAP code for data source 0HR_LSO_1 which is related to module " training and event management "(also known as LMS or LSO) in ECC 6.0 .
So how can I find out appropriate user exit for the same .I have to concentrate on the field "kostl (cost centre)" in that data source .
Please provide some suggestions .
Thanking You ,
Tarun Brijwani .

Hi Tarun...
I this might help you.
In the HR System:
1) T-CODE: CMOD
2) Choose an existing project (vg: Z12345)
3) Modify
4) Press Components button
5) Look for the enhance: RSAP0001 (the BW extracting enhancement)
6) The you have one of the following option:
a- If the Data Source is "transaction data": The exit is "EXIT_SAPLRSAP_001"
b- If the Data Source is "master data": The exit is "EXIT_SAPLRSAP_002"
7) double-click in the appropriate one
8) You'll see an INCLUDE sentence. Could be this ZXRSAU01 or this ZXRSAU02 (depending on the previous step). Double-click and you'll be redirected to the SE38
9) some code:
CASE i_datasource
WHEN '0HR_LSO_1'.
    LOOP i_t_data INTO my_struct
       my_struct-KOSTL           "Here you'll must have your Cost Center
       ...etc...etc...etc
    ENDLOOP.
WHEN OTHERS.
ENDCASE
Hope it helps.
gdmon

User exit for data source 0HR_LSO_1

Hi ,
I have to write the enhancement ABAP code for data source 0HR_LSO_1 which is related to module " training and event management "(also known as LMS or LSO) in ECC 6.0 .
So how can I find out appropriate user exit for the same .I have to concentrate on the field "kostl (cost centre)" in that data source .
Please provide some suggestions .
Thanking You ,
Tarun Brijwani .

Hi Tarun...
I this might help you.
In the HR System:
1) T-CODE: CMOD
2) Choose an existing project (vg: Z12345)
3) Modify
4) Press Components button
5) Look for the enhance: RSAP0001 (the BW extracting enhancement)
6) The you have one of the following option:
a- If the Data Source is "transaction data": The exit is "EXIT_SAPLRSAP_001"
b- If the Data Source is "master data": The exit is "EXIT_SAPLRSAP_002"
7) double-click in the appropriate one
8) You'll see an INCLUDE sentence. Could be this ZXRSAU01 or this ZXRSAU02 (depending on the previous step). Double-click and you'll be redirected to the SE38
9) some code:
CASE i_datasource
WHEN '0HR_LSO_1'.
    LOOP i_t_data INTO my_struct
       my_struct-KOSTL           "Here you'll must have your Cost Center
       ...etc...etc...etc
    ENDLOOP.
WHEN OTHERS.
ENDCASE
Hope it helps.
gdmon

I need format for data in excel file load into info cube to planning area.

Hi gurus,
I need format for data in excel file load into info cube to planning area.
can you send me what should i maintain header
i have knowledge on like
plant,location,customer,product,history qty,calander
100,delhi,suresh,nokia,250,2011211
if it is right or wrong can u explain and send me about excel file format.
babu

Hi Babu,
The file format should be same as you want to upload. The sequence of File format should be same communication structure.
Like,
Initial columns with Characteristics (ex: plant,location,customer,product)
date column (check for data format) (ex: calander)
Last columsn with Key figures (history qty)
Hope this helps.
Regards,
Nawanit

Need help for Format HD

Hi I need Help for Formating HD so Wat Key need hold on start up for format HD I apprciated you Help

Jesus:
Formatting, Partitioning Erasing a Hard Disk Drive
Warning! This procedure will destroy all data on your Hard Disk Drive. Be sure you have an up-to-date, tested backup of at least your Users folder and any third party applications you do not want to re-install before attempting this procedure.
• With computer shut down insert install disk in optical drive.
• Hit Power button and immediately after chime hold down the "C" key.
• Select language
• Go to the Utilities menu (Tiger) Installer menu (Panther & earlier) and launch Disk Utility.
• Select your HDD (manufacturer ID) in left side bar.
• Select Partition tab in main panel. (You are about to create a single partition volume.)
• _Where available_ +Click on Options button+
+• Select Apple Partition Map (PPC Macs) or GUID Partition Table (Intel Macs)+
+• Click OK+
• Select number of partitions in pull-down menu above Volume diagram.
(Note 1: One partition is normally preferable for an internal HDD.)
• Type in name in Name field (usually Macintosh HD)
• Select Volume Format as Mac OS Extended (Journaled)
• Click Partition button at bottom of panel.
• Select Erase tab
• Select the sub-volume (indented) under Manufacturer ID (usually Macintosh HD).
• Check to be sure your Volume Name and Volume Format are correct.
• Click Erase button
• Quit Disk Utility.
cornelius

Need help for my requirement...

Need help for my requirement...
Hello Experts,
I have report where users can input the company, housebank, account ID and posting date.
Now in one column of my report named 'Cash in Bank', I need to get all postings from cash
accounts with GL code ending in '0'. Now, I know that I can get the amounts in BSIS/BSAS
but how do I link it with the proper bank and account?
For example:
                   Cash in Bank
Bank A
Account ID 1     1,000,000
Account ID 2     25,000,000
Hope you can help me guys. Thank you and take care!

hi Viraylab,
each house bank you can find in table T012, in T012K you'll find the bank accounts to the housebank, the G/L account will be in T012K-HKONT.
hope this helps
ec

Need help for importing oracle 10G dump into 9i database

hi, Someone help me to import oracle 10G dump into 9i database. I'm studying oracle . Im using oracle 10G developer suite(downloaded from oracle) and oracle 9i database. I saw some threads tat we can't import the higher version dumps into lower version database. But i'm badly need help for importing the dump...
or
someone please tell me the site to download oracle 9i Developer suite as i can't find it in oracle site...

I didnt testet it to import a dump out of a 10g instance into a 9i instance if this export has been done using a 10g environment.
But it is possible to perform an export with a 9i environment against a 10g instance.
I am just testing this with a 9.2.0.8 environment against a 10.2.0.4.0 instance and is working so far.
The system raises an EXP-00008 / ORA-37002 error after exporting the data segments (exporting post-schema procedural objects and actions).
I am not sure if it is possible to perform an import to a 9i instance with this dump but maybe worth to give it a try.
It should potentially be possible to export at least 9i compatible objects/segments with this approach.
However, I have my doubts if this stunt is supported by oracle ...
Message was edited by:
user434854

Need help for publishing web intelligence document (universe) into InfoView

Post Author: mirage
CA Forum: Publishing
Hello all,
I need help for publishing web intelligence document (universe) into InfoView.
can't find this information in Business Objects Designer's Guide and in Business Objects Administrator Guide.
Can somebody give short instructions how can I do it?
Regards, Slava

If the change between the 2 types of data has to happen dynamically during run time them
1. Use 2 dataproviders
a. Current
b. Historic
2. Merge the 2 dimensions
3. Use Webi variable to switch between the measure of the current and historic universe
Ex if [year] < 2010 then historic.[expense] else current.[expense]
Hope this helps,
Divya

Need help for access list problem

Cisco 2901 ISR
I need help for my configuration.... although it is working fine but it is not secured cause everybody can access the internet
I want to deny this IP range and permit only TMG server to have internet connection. My DHCP server is the 4500 switch.
Anybody can help?
         DENY       10.25.0.1 – 10.25.0.255
                          10.25.1.1 – 10.25.1.255
Permit only 1 host for Internet
                10.25.7.136 255.255.255.192 ------ TMG Server
Using access-list.
( Current configuration )
object-group network IP
description Block_IP
range 10.25.0.2 10.25.0.255
range 10.25.1.2 10.25.1.255
interface GigabitEthernet0/0
ip address 192.168.2.3 255.255.255.0
ip nat inside
ip virtual-reassembly in max-fragments 64 max-reassemblies 256
duplex auto
speed auto
interface GigabitEthernet0/1
description ### ADSL WAN Interface ###
no ip address
pppoe enable group global
pppoe-client dial-pool-number 1
interface ATM0/0/0
no ip address
no atm ilmi-keepalive
interface Dialer1
description ### ADSL WAN Dialer ###
ip address negotiated
ip mtu 1492
ip nat outside
no ip virtual-reassembly in
encapsulation ppp
dialer pool 1
dialer-group 1
ppp authentication pap callin
ppp pap sent-username xxxxxxx password 7 xxxxxxxxx
ip nat inside source list 101 interface Dialer1 overload
ip route 0.0.0.0 0.0.0.0 Dialer1
ip route 10.25.0.0 255.255.0.0 192.168.2.1
access-list 101 permit ip 10.25.0.0 0.0.255.255 any
access-list 105 deny   ip object-group IP any
From the 4500 Catalyst switch
( Current Configuration )
interface GigabitEthernet0/48
no switchport
ip address 192.168.2.1 255.255.255.0 interface GigabitEthernet2/42
ip route 0.0.0.0 0.0.0.0 192.168.2.3

Hello,
Host will can't get internet connection
I remove this configuration......         access-list 101 permit ip 10.25.0.0 0.0.255.255 any
and change the configuration ....      ip access-list extended 101
                                                            5 permit ip host 10.25.7.136 any
In this case I will allow only host 10.25.7.136 but it isn't work.
No internet connection from the TMG Server.

Need help for Data source 0CRM_TRPR_ATTR

Similar Messages

Maybe you are looking for