Need help!! for DSL Modem to airport
My brother (hes in SC I'm in NY) called looking for help and I can't figure this situation out. SO I'm here for all the help here
He has DSL line. Into a modem that is all a DHCP NAT distributer. He has an Airport Extreme dual band and wants to set it up so the Guest network works. It is currently setup in Bridge mode.
So far I have failed in figuring this out. If we turn off the DSL modem as DHCP, and setup the Airport to be a DHCP - it doesn't have the internet. We haven't even gotten to the Guest part yet.
I know I'm asking a lot but is there some setting I'm missing?
Once DSL modem set to not be DHCP, so I use the Airport WAN port or still just into and ethernet port?
Thanks. I am posting this first before I goggle. Thissite usually faster and right.
I would think that the Gateway device (combo modem/router) might have an option to reconfigure it as a bridge, but without any information on the exact make/model of this device I can't offer much advice. Most non-AirPort routers typically use a web-based interface for administering them.
The AirPort must have NAT enabled for it to provide a Guest network. Only one option; Connection Sharing = Share a public IP address, will do so.
Similar Messages
-
Power backup for dsl modem and Airport Extreme
Does anyone here have backup power for a dsl modem and Airport Extreme that is successful? I have a name brand power backup and when the power goes off both the dsl modem and Airport Extreme remain on; however, the network connection is lost so the fact that they remain on doesn't help. I have been unable to find anything about this problem on the internet generally and consultation with a well-known squad person has not helped. Any thoughts about this will be welcome.
Yes, I agree. But since the backup power keeps the modem powered, why doesn't the dsl connection continue? The squad person I talked with told me that the speed with which the backup power units replace power during an outage is about the same across different backup brands/units (I don't recall the speed but it was in milliseconds) and should be quick enough to retain the dsl connection. Doesn't happen.
-
hi everyone. i need help for resettting my airport express as a repeater. i bought is airport express 2nd hand. so now this one already registered to old wireless.
could anyone have any advice. thank you.
now the airport express is blinking yellow color.
my main base is using time capsule. this is a new one so when i first turn it on and set it up in airport utility its very easy.
now setting the repeater (airport express) is ............ ???
thanks everyone.Do a factory reset, then it'd be like it's new from the Apple Store.
http://support.apple.com/kb/ht3728 -
New dsl modem; existing Airport Network
I'm trying to replace the dsl modem I rent monthly from Centurylink with a DSL router I own. I already have a functioning Airport (AEBS) wireless network. Can I simply unplug the current modem that I'm using and plug in the modem I own? I want the network to just stay the same. Just to be clear: I have a functioning DSL modem and Airport Network. Can I swap out one modem for a new one without having to reconfigure anything?
Maybe ...
Anytime you change networking hardware, it is always a good idea to perform a complete power recycle of your networking components.
I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
Disconnect the AirPort base station from the Internet broadband modem.
Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
Power-up your computer(s).
Since you did not make any configuration changes, the AirPort base station should broadcast the same Wi-Fi network with security settings as before. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results. -
I have problem with buying in games , I got the massage that the purchased can not be completed , please contact iTunes support.. I need help for my case please
http://www.apple.com/support/itunes/contact/
-
Hi I need Help for Formating HD so Wat Key need hold on start up for format HD I apprciated you Help
Jesus:
Formatting, Partitioning Erasing a Hard Disk Drive
Warning! This procedure will destroy all data on your Hard Disk Drive. Be sure you have an up-to-date, tested backup of at least your Users folder and any third party applications you do not want to re-install before attempting this procedure.
• With computer shut down insert install disk in optical drive.
• Hit Power button and immediately after chime hold down the "C" key.
• Select language
• Go to the Utilities menu (Tiger) Installer menu (Panther & earlier) and launch Disk Utility.
• Select your HDD (manufacturer ID) in left side bar.
• Select Partition tab in main panel. (You are about to create a single partition volume.)
• _Where available_ +Click on Options button+
+• Select Apple Partition Map (PPC Macs) or GUID Partition Table (Intel Macs)+
+• Click OK+
• Select number of partitions in pull-down menu above Volume diagram.
(Note 1: One partition is normally preferable for an internal HDD.)
• Type in name in Name field (usually Macintosh HD)
• Select Volume Format as Mac OS Extended (Journaled)
• Click Partition button at bottom of panel.
• Select Erase tab
• Select the sub-volume (indented) under Manufacturer ID (usually Macintosh HD).
• Check to be sure your Volume Name and Volume Format are correct.
• Click Erase button
• Quit Disk Utility.
cornelius -
Need help for my requirement...
Need help for my requirement...
Hello Experts,
I have report where users can input the company, housebank, account ID and posting date.
Now in one column of my report named 'Cash in Bank', I need to get all postings from cash
accounts with GL code ending in '0'. Now, I know that I can get the amounts in BSIS/BSAS
but how do I link it with the proper bank and account?
For example:
Cash in Bank
Bank A
Account ID 1 1,000,000
Account ID 2 25,000,000
Hope you can help me guys. Thank you and take care!hi Viraylab,
each house bank you can find in table T012, in T012K you'll find the bank accounts to the housebank, the G/L account will be in T012K-HKONT.
hope this helps
ec -
i need help for flash builder 4 and papervison 3d. I need to create a slider with it ranges of value from 10 to 50 to adjust the camera values for the camera.fov and also need to create it for the yaw of the object from 0 to 360. I try to look for any slider event and classes in this program but cant find any, btw, i need to use the AS only project file.
here is my codes:
can you please tell me how i should modify the codes?
package
import flash.display.BitmapData;
import flash.display.Sprite;
import flash.events.Event;
import org.papervision3d.materials.BitmapFileMaterial;
import org.papervision3d.materials.BitmapMaterial;
import org.papervision3d.objects.primitives.Sphere;
import org.papervision3d.view.BasicView;
[SWF (width="800", height="600", backgroundColor="0x000000",frameRate="30")]
public class EarthBitmap extends BasicView
private var sphere:Sphere;
public function EarthBitmap()
super(800 , 600);
var earthmaterial:BitmapFileMaterial = new BitmapFileMaterial("../assets/Earth.jpg");
sphere = new Sphere(earthmaterial,100,20,18);
camera.fov = 25;
scene.addChild(sphere);
addEventListener(Event.ENTER_FRAME,rotateSphere);
public function rotateSphere(evt:Event):void
sphere.yaw(0.2);
singleRender();Turn the click handler into a full on separate function. Then store all the views in an array and use Math.rand() to randomly choose one.
Something like this:
<fx:Script>
<![CDATA[
var questionsArray:Array = {question2,question3,question5,questionRed,questionGeography};
function buttonClickHandler(event:MouseEvent){
var randomProblem:int = Math.floor(Math.random()*(questionsArray.length)); //generates a random integer between 0 and the total number of questions in the array (arrays are 0-based)
navigator.pushView(questionsArray[randomProblem]);
]]>
</fx:Script>
<s:Button id="randomProblemButton" label="Next Problem" click="buttonClickHandler(event)" />
Haven't tested that, but something along that line should work -
Need help for importing oracle 10G dump into 9i database
hi, Someone help me to import oracle 10G dump into 9i database. I'm studying oracle . Im using oracle 10G developer suite(downloaded from oracle) and oracle 9i database. I saw some threads tat we can't import the higher version dumps into lower version database. But i'm badly need help for importing the dump...
or
someone please tell me the site to download oracle 9i Developer suite as i can't find it in oracle site...I didnt testet it to import a dump out of a 10g instance into a 9i instance if this export has been done using a 10g environment.
But it is possible to perform an export with a 9i environment against a 10g instance.
I am just testing this with a 9.2.0.8 environment against a 10.2.0.4.0 instance and is working so far.
The system raises an EXP-00008 / ORA-37002 error after exporting the data segments (exporting post-schema procedural objects and actions).
I am not sure if it is possible to perform an import to a 9i instance with this dump but maybe worth to give it a try.
It should potentially be possible to export at least 9i compatible objects/segments with this approach.
However, I have my doubts if this stunt is supported by oracle ...
Message was edited by:
user434854 -
Need Help for Nokia 6500 slide
Hi all I'm A new Guy here ,
But I do really need help for hard reset my phone
I already try *#7073# But It doesn't work ,
If Anybody know to make a hard reset please helprwss wrote:
I'v got te same problem with my 6500 Slide, is there a button combination that we have to press
to hard reset the 6500 Slide?!
How does the 6500 slide hard reset?
That's simple.
All you have to do is:
From MENU goto SETTINGS, When there scroll down and select 'Restore Factory Setting'.
There are two options in there:
"Restore Settings only"
and
"Restore all"
Select "Restore All"
When done the phone will delete every thing on the Phone memory(C:\)(contacts,picture,messages etc)
and also restore phone to its original settings and will restart.
This proceedure is mostly common on S40 phone.
Hope this explain and solve the problem. -
Need help for publishing web intelligence document (universe) into InfoView
Post Author: mirage
CA Forum: Publishing
Hello all,
I need help for publishing web intelligence document (universe) into InfoView.
can't find this information in Business Objects Designer's Guide and in Business Objects Administrator Guide.
Can somebody give short instructions how can I do it?
Regards, SlavaIf the change between the 2 types of data has to happen dynamically during run time them
1. Use 2 dataproviders
a. Current
b. Historic
2. Merge the 2 dimensions
3. Use Webi variable to switch between the measure of the current and historic universe
Ex if [year] < 2010 then historic.[expense] else current.[expense]
Hope this helps,
Divya -
Need help for access list problem
Cisco 2901 ISR
I need help for my configuration.... although it is working fine but it is not secured cause everybody can access the internet
I want to deny this IP range and permit only TMG server to have internet connection. My DHCP server is the 4500 switch.
Anybody can help?
DENY 10.25.0.1 – 10.25.0.255
10.25.1.1 – 10.25.1.255
Permit only 1 host for Internet
10.25.7.136 255.255.255.192 ------ TMG Server
Using access-list.
( Current configuration )
object-group network IP
description Block_IP
range 10.25.0.2 10.25.0.255
range 10.25.1.2 10.25.1.255
interface GigabitEthernet0/0
ip address 192.168.2.3 255.255.255.0
ip nat inside
ip virtual-reassembly in max-fragments 64 max-reassemblies 256
duplex auto
speed auto
interface GigabitEthernet0/1
description ### ADSL WAN Interface ###
no ip address
pppoe enable group global
pppoe-client dial-pool-number 1
interface ATM0/0/0
no ip address
no atm ilmi-keepalive
interface Dialer1
description ### ADSL WAN Dialer ###
ip address negotiated
ip mtu 1492
ip nat outside
no ip virtual-reassembly in
encapsulation ppp
dialer pool 1
dialer-group 1
ppp authentication pap callin
ppp pap sent-username xxxxxxx password 7 xxxxxxxxx
ip nat inside source list 101 interface Dialer1 overload
ip route 0.0.0.0 0.0.0.0 Dialer1
ip route 10.25.0.0 255.255.0.0 192.168.2.1
access-list 101 permit ip 10.25.0.0 0.0.255.255 any
access-list 105 deny ip object-group IP any
From the 4500 Catalyst switch
( Current Configuration )
interface GigabitEthernet0/48
no switchport
ip address 192.168.2.1 255.255.255.0 interface GigabitEthernet2/42
ip route 0.0.0.0 0.0.0.0 192.168.2.3Hello,
Host will can't get internet connection
I remove this configuration...... access-list 101 permit ip 10.25.0.0 0.0.255.255 any
and change the configuration .... ip access-list extended 101
5 permit ip host 10.25.7.136 any
In this case I will allow only host 10.25.7.136 but it isn't work.
No internet connection from the TMG Server. -
Hi Friends,
Need help for cenvat reversal.
Reversed MIRO by MR8M & MIGO by 102 movement but not able to post & cancel cenvat by J1IEX.
In table J_1IEXCHDR status = "P" and J1I5 does not update for document of 102 movement because reversal document of MIGO, i.e. material document with 102 movement type does not have excise tab. MBSM-Cancelled Material Documents, does not show any of the material documents.
Want to reverse the cenvat credit, please help.
--Anil BhamereHi,
If I select Cancellation in MIGO then there is only Material Document option.
In MIGO Purchase Order option shows for Goods Receipt, Goods Issue and Subsequet Adj.
In this case I have been selected Goods Receipt option followed by purchase order number by which original goods receipt MIGO was created, selected 102 movement type and from line item respective MIGO document. The reversal document created successfully where as original MIGO document does not show in cancelled document list. When post option selected from J1IEX and entered vendor excise number then message appeared as No Part I exists for availing credit in excise invoice xxxxx.
If Cancel option selected from J1IEX and entered vendor excise number then message appeared as Excise invoice xxxx has already been posted for vendor xxxxx.
Please help.
Regards,
Anil Bhamere -
Need help for finding objects impacted by size change for an infoobject
hi all,
need help for finding objects impacted by size change
for xxx infoobject, due to some requirements, the size to be changed from
char(4) to char(10), in the source database tables as well as adjustment
to be done in BI side.
this infoobject xxx is nav attribute of YYY as well as for WWW
infoobjects. and xxx is loaded from infopkg for www infoobject load.
now that i have to prepare an impact analysis doc for BI side.
pls help me with what all could be impacted and what to be done as a
solution to implement the size change.
FYI:
where used list for xxx infoobject - relveals these object types :
infocubes,
infosources,
tranfer rules,
DSO.
attribute of characteristic,
nav attribute,
ref infoobject,
in queries,
in variablesHi Swetha,
You will have to manually make the table adjustments in all the systems using SE14 trans since the changes done using SE14 cannot be collected in any TR.
How to adjust tables :
Enter the table name in SE14. For ex for any Z master data(Say ZABCD), master data table name would be /BIC/PZABCD, text table would be /BIC/TZABCD. Similarly any DSO(say ZXYZ) table name would be /BIC/AZXYZ00 etc.
Just enter the table name in SE14 trans --> Edit --> Select the radio button "Save Data" --> Click on Activate & adjust database table.
NOTE : Be very careful in using SE14 trans since there is possibility that the backend table could be deleted.
How to collect the changes in TR:
You can collect only the changes made to the IO --> When you activate, it will ask you for the TR --> Enter the correct package name & create a new TR. If it doesn't prompt you for TR, just goto Extras --> Write transport request from the IO properties Menu screen. Once these IO changes are moved successfully, then the above proceduce can be followed using SE14 trans.
Hope it helps!
Regards,
Pavan -
Need help for writing extract program
hi
i need help for writing extract program to retriew data from legacy system.
i already developed bdc programs for me31k and me21.
my requirement is to write extract program s for those t.codes.
to retriew data from legacy system and stored in flat file.i need help with a java program. it is a program that allows the user to enter a student's GPA, number of extracurricular activities, and number of service activities. The user can not enter a gpa above 4.0 or below 0. The user can not enter a negative number for the number of both activities. If the student meets the following criteria: 1) GPA of 3.8 or above and at least one extracurricular activity and one service activity, 2) GPA below 3.8 but at least 3.4 and a total of at least three extracurricular and service activities, 3) GPA below 3.4 but at least 3.0 and at least two extracurricular activities and three service activities, the message "Scholarship candidate" should display. If the student does not meet the criteria above, then the message"not a candidate" should display. Can you help me, please?
You haven't posted ANY 'java program' for us to help with.
The forum is NOT a coding service. It is to help you with YOUR code.
Post the code you have written and SHOW us (don't just tell us) how you compile it and execute it and the results you get. Then we can help you with any problems you are are having.
If you need help understanding just what the program should be doing you need to ask your instructor to clarify the assignment.
Maybe you are looking for
-
Can't login with Microsoft account
My company blocks logging in to Skype on our laptops (as well as Onenote, One drive etc.) Is there a way to find my 'skype name' and log in with that instead? When I installed and setup skype I just used my outlook account but now I'm stuck and can't
-
How can I delete apps from the app store? There seems to be every app I have ever downloaded and deleted since I got my phone in 2007. When I go to app store and select update apps there's a menu at the top that says purchased and when I select it it
-
Everytime I export to a quicktime movie, FCE crashes. I can export short movies sometimes but anything over 12 min or so causes it to "unexpectedly quit". I have tried trashing prefs, repairing permissions with no luck. Could a drive be at fault? Dis
-
9i Lite on windows 2003 64 bit os
hi.. is Oracle9i Lite Release 5.0.2.8.0 supported on windows 2003 server 64 bit...??? where can i find the 9i lite software for 64 bit os??
-
I do not take many pictures, but even my pictures folder is around 20GB. I think one problem is that photos are duplicated if they are modified. Is there a way to remove the original photos and only keep the modified one? This should be a build in op