Need help for HR data migration

Hi Experts,
     I need a help that i want to do data migration for PA30 and PP01 transactions.so if any std bapi for upload the data or bdc programs you have means let me know for further process.if early it is good for me.
Thanks,
Deesanth

You can use the standard batch program RPUSTD00.  Also you can use the function module HR_INFOTYPE_OPERATION.
Hope this is helpful.
Thanks,
Pavan

Similar Messages

  • Need help for retreiving data

    Hi All,
    what i need to do is to loop through a FM when some particular checkbox is checked for each date (it is in range format) entered through the selection screen by user.
    I would like to just create one spool with all of the statements
    now how to get this date from the selection screen with all these requirements??
    useful answers will be awarded points..
    thanks

    I have solved the problem now, it may no be the best way, quite bit complex. //thanks

  • Need help for SRM Data Extraction into BI-7

    Hi Experts,
    I am looking for help regarding SRM DataSource Extraction to BW. I am working on BW project and need to extract data from SRM Data Source 0BBP_TD_CONTR_2 and 0SRM_TD_PRO. I need to know about the extraction process from SRM. Is there a tool available like LO Cockpit in SRM for extraction and how can we manage the delta in it. Or i can use the T-code RSA5 for that and follow the normal process. If I can get some documentation that can give me an idea for data extraction and delta management in SRM that would be appreciated. Any kind of help will be welcome.
    Thanks in Advance.

    SRM doesn't use kind of "cockpit" LO-like in ECC.
    Overall picture:
    http://help.sap.com/saphelp_srm40/helpdata/en/b3/cb7b401c976d1de10000000a1550b0/content.htm
    If you setup data flows accordign Business Content of SRM:
    http://help.sap.com/saphelp_nw2004s/helpdata/en/3a/7aeb3cad744026e10000000a11405a/frameset.htm
    Then just perform an init load and schedule the deltas.

  • Need help in oracle data recovery

    Friends ,i need help in oracle data recovery.
    I had an oracle 8i database running on windows.
    For some reason Windows operating system crashed.
    It is not booting up.
    I dont have current backups.But my database physical files are in the disk.
    Controlfile,datafiles and redo log files are there.
    Is there any way I can recover my database?
    Please help in this issue.
    regards
    Ajith

    HI citrus,
    thanks for the reply.
    I have installed database 9i on the same PC after O/S reinstallation.
    You are saying that ,I need to keep oracle root folder same as that of my old installation ,and copy control files,redo log and data files in exactly same folders as that of old database,and then start the database?
    thank you for your patience and support.
    regards.,
    Ajith

  • Need help for Format HD

    Hi I need Help for Formating HD so Wat Key need hold on start up for format HD I apprciated you Help

    Jesus:
    Formatting, Partitioning Erasing a Hard Disk Drive
    Warning! This procedure will destroy all data on your Hard Disk Drive. Be sure you have an up-to-date, tested backup of at least your Users folder and any third party applications you do not want to re-install before attempting this procedure.
    • With computer shut down insert install disk in optical drive.
    • Hit Power button and immediately after chime hold down the "C" key.
    • Select language
    • Go to the Utilities menu (Tiger) Installer menu (Panther & earlier) and launch Disk Utility.
    • Select your HDD (manufacturer ID) in left side bar.
    • Select Partition tab in main panel. (You are about to create a single partition volume.)
    • _Where available_ +Click on Options button+
    +• Select Apple Partition Map (PPC Macs) or GUID Partition Table (Intel Macs)+
    +• Click OK+
    • Select number of partitions in pull-down menu above Volume diagram.
    (Note 1: One partition is normally preferable for an internal HDD.)
    • Type in name in Name field (usually Macintosh HD)
    • Select Volume Format as Mac OS Extended (Journaled)
    • Click Partition button at bottom of panel.
    • Select Erase tab
    • Select the sub-volume (indented) under Manufacturer ID (usually Macintosh HD).
    • Check to be sure your Volume Name and Volume Format are correct.
    • Click Erase button
    • Quit Disk Utility.
    cornelius

  • Need help for my requirement...

    Need help for my requirement...
    Hello Experts,
    I have report where users can input the company, housebank, account ID and posting date.
    Now in one column of my report named 'Cash in Bank', I need to get all postings from cash
    accounts with GL code ending in '0'. Now, I know that I can get the amounts in BSIS/BSAS
    but how do I link it with the proper bank and account?
    For example:
                       Cash in Bank
    Bank A
      Account ID 1     1,000,000
      Account ID 2     25,000,000
    Hope you can help me guys. Thank you and take care!

    hi Viraylab,
    each house bank you can find in table T012, in T012K you'll find the bank accounts to the housebank, the G/L account will be in T012K-HKONT.
    hope this helps
    ec

  • I need help proving the date tag on a photo stored in my iPhoto is from the date it was sent to my iphone/date it was imported into iphoto - and that it is NOT the date the photo was actually taken.  Please help!

    I need help proving the date tag on a photo stored in my iPhoto is from the date it was sent to my iphone/date it was imported into iphoto - and that it is NOT the date the photo was actually taken.   I recieved a photo via text on my iphone and then I synced my iphone to my macbook and now it is in iphoto.  I already know that the date on the photo per the tag that shows up on it in iphoto is NOT the date the photo was actually taken.  I need article or literature or something confirming the tag is from when it was sent to the iphone and/or when it was imported.  I greatly appreciate some assistance!

    All I am trying to do is find something on a forum board or article etc stating that the the date showing in iphoto could be the date it was imported or synced or sent to me and not the actual date taken.
    The date on the photo could be anything because you can edit the date with iPhoto or any of 100 apps, free and paid for. So, the date on the photo will prove nothing, I'm afraid.
    Regards
    TD

  • Need help for importing oracle 10G dump into 9i database

    hi, Someone help me to import oracle 10G dump into 9i database. I'm studying oracle . Im using oracle 10G developer suite(downloaded from oracle) and oracle 9i database. I saw some threads tat we can't import the higher version dumps into lower version database. But i'm badly need help for importing the dump...
    or
    someone please tell me the site to download oracle 9i Developer suite as i can't find it in oracle site...

    I didnt testet it to import a dump out of a 10g instance into a 9i instance if this export has been done using a 10g environment.
    But it is possible to perform an export with a 9i environment against a 10g instance.
    I am just testing this with a 9.2.0.8 environment against a 10.2.0.4.0 instance and is working so far.
    The system raises an EXP-00008 / ORA-37002 error after exporting the data segments (exporting post-schema procedural objects and actions).
    I am not sure if it is possible to perform an import to a 9i instance with this dump but maybe worth to give it a try.
    It should potentially be possible to export at least 9i compatible objects/segments with this approach.
    However, I have my doubts if this stunt is supported by oracle ...
    Message was edited by:
    user434854

  • Need help for publishing web intelligence document (universe) into InfoView

    Post Author: mirage
    CA Forum: Publishing
    Hello all,
    I need help for publishing web intelligence document (universe) into InfoView.
    can't find this information in Business Objects Designer's Guide and in Business Objects Administrator Guide.
    Can somebody give short instructions how can I do it?
    Regards, Slava

    If the change between the 2 types of data has to happen dynamically during run time them
    1. Use 2 dataproviders
         a. Current
         b. Historic
    2. Merge the 2 dimensions
    3. Use Webi variable to switch between the measure of the current and historic universe
    Ex  if [year] < 2010 then historic.[expense] else current.[expense]
    Hope this helps,
    Divya

  • Need help for finding objects impacted by size change for an infoobject

    hi all,
    need help for finding objects impacted by size change
    for xxx infoobject, due to some requirements, the size to be changed from
    char(4) to char(10), in the source database tables as well as adjustment
    to be done in BI side.
    this infoobject xxx is nav attribute of YYY as well as for WWW
    infoobjects. and xxx is loaded from infopkg for www infoobject load.
    now that i have to prepare an impact analysis doc for BI side.
    pls help me with what all could be impacted and what to be done as a
    solution to implement the size change.
    FYI:
    where used list for xxx infoobject - relveals these object types :
    infocubes,
    infosources,
    tranfer rules,
    DSO.
    attribute of characteristic,
    nav attribute,
    ref infoobject,
    in queries,
    in variables

    Hi Swetha,
    You will have to manually make the table adjustments in all the systems using SE14 trans since the changes done using SE14 cannot be collected in any TR.
    How to adjust tables :
    Enter the table name in SE14. For ex for any Z master data(Say ZABCD), master data table name would be /BIC/PZABCD, text table would be /BIC/TZABCD. Similarly any DSO(say ZXYZ) table name would be /BIC/AZXYZ00 etc.
    Just enter the table name in SE14 trans --> Edit --> Select the radio button "Save Data" --> Click on Activate & adjust database table.
    NOTE : Be very careful in using SE14 trans since there is possibility that the backend table could be deleted.
    How to collect the changes in TR:
    You can collect only the changes made to the IO --> When you activate, it will ask you for the TR --> Enter the correct package name & create a new TR. If it doesn't prompt you for TR, just goto Extras --> Write transport request from the IO properties Menu screen. Once these IO changes are moved successfully, then the above proceduce can be followed using SE14 trans.
    Hope it helps!
    Regards,
    Pavan

  • Need help for writing extract program

    hi
    i need help for writing extract program to retriew data from legacy system.
    i already developed bdc programs for me31k and me21.
    my requirement is to write extract program s for those t.codes.
    to retriew data from legacy system and stored in flat file.

    i need help with a java program. it is a program that allows the user to enter a student's GPA, number of extracurricular activities, and number of service activities. The user can not enter a gpa above 4.0 or below 0. The user can not enter a negative number for the number of both activities. If the student meets the following criteria: 1) GPA of 3.8 or above and at least one extracurricular activity and one service activity, 2) GPA below 3.8 but at least 3.4 and a total of at least three extracurricular and service activities, 3) GPA below 3.4 but at least 3.0 and at least two extracurricular activities and three service activities, the message "Scholarship candidate" should display. If the student does not meet the criteria above, then the message"not a candidate" should display. Can you help me, please?
    You haven't posted ANY 'java program' for us to help with.
    The forum is NOT a coding service. It is to help you with YOUR code.
    Post the code you have written and SHOW us (don't just tell us) how you compile it and execute it and the results you get. Then we can help you with any problems you are are having.
    If you need help understanding just what the program should be doing you need to ask your instructor to clarify the assignment.

  • Need help for finding oracle payables tables

    Hi,
    I need help for finding tables relating fields INVOICE_ID, NOTIFICATION_ID and APPROVAL_STATUS or WFAPPROVAL_STATUS. I have searched a lot but has been unable to find any table containing all the above mentioned fields. I found the table WF_NOTIFICATIONS for INVOICE_ID, however have been unable to find the latest tables with INVOICE_ID and APPROVAL_STATUS as fields.
    All the tables having this combination are either very old tables which are not used anymore or doesnt give the required data. Please let me know where am i going wrong. Once i get the required tables, i need to join the tables to get the required data with the imp fields. Also, the values of WFAPPROVAL_STATUS are not very clear to me. I need values for it as APPROVED, REJECTED AND INITIATED.

    Hi Swetha,
    You will have to manually make the table adjustments in all the systems using SE14 trans since the changes done using SE14 cannot be collected in any TR.
    How to adjust tables :
    Enter the table name in SE14. For ex for any Z master data(Say ZABCD), master data table name would be /BIC/PZABCD, text table would be /BIC/TZABCD. Similarly any DSO(say ZXYZ) table name would be /BIC/AZXYZ00 etc.
    Just enter the table name in SE14 trans --> Edit --> Select the radio button "Save Data" --> Click on Activate & adjust database table.
    NOTE : Be very careful in using SE14 trans since there is possibility that the backend table could be deleted.
    How to collect the changes in TR:
    You can collect only the changes made to the IO --> When you activate, it will ask you for the TR --> Enter the correct package name & create a new TR. If it doesn't prompt you for TR, just goto Extras --> Write transport request from the IO properties Menu screen. Once these IO changes are moved successfully, then the above proceduce can be followed using SE14 trans.
    Hope it helps!
    Regards,
    Pavan

  • Need Help for Blackberry8700g

    I need help for Blackberry8700g, It is the error message Java.lang.outofmemory Error. I can not make even phone calls. After reset it is same message pop up and does not off the power jum error523 

    You are in line to wipe and reload the OS on the BlackBerry.
    Follow the directions here and you will be fine.
    http://www.blackberryfaq.com/index.php/How_do_I_wipe_the_BlackBerry_using_Jl_Cmder%3F
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • I need help for actionscript 3, sending php info to my email, website created in Flash cs5 pro

    Hi,  My name is David and I followed a course creating my own website from Lynda.com by Paul Trani. After that I created my first own webste. After I finished it, everything was working well in flash and firefox. I have only one problem and question concerning the feed back form for sending info from my website to my emailaddres. I created my website “LisbonDreamWalking”in Flash CS5 pro. I herein have a contact page, where people can send an email for a walk in Lisbon, date,the number of people etc. Now I want through my ISP / host funpic.org, that the input, info text fields to be sended to my emailaddress [email protected]. My mail URL adress  iss: http://lisbondreamwalk.li.funpic.org  This is a free host, so they don't work with forms like in the course, and I need some additional info for the php. Here is my HTML (Flash actionscript 3.0) for the sending I only have the red text to fill in (php), I was told by the adobe course.I really hope someone can help me?! Thanks in advance!
    Instructions: 1. Add your custom code on a new line after the line that says "// Start your custom code" below. The code will execute when the symbol instance is clicked. */  send_btn.addEventListener(MouseEvent.CLICK, fl_MouseClickHandler_13);  function fl_MouseClickHandler_13(event:MouseEvent):void {          if (thename.text == "" || theemail.text == "" || thetime.text == "" || thepersons.text == "" || themessage.text == "")      {           thankyou.text = "please fill out all fields";      }      else      {           // create a variable container           var allVars : URLVariables = new URLVariables();           allVars.name = thename.text;           allVars.email = theemail.text;           allVars.time = thetime.text;           allVars.persons = thepersons.text;           allVars.message = themessage.text;           //Send info to a URL           var mailAddress:URLRequest = new URLRequest("http.www.namewebsite.com/gdform.php");           mailAddress.data = allVars;           mailAddress.method = URLRequestMethod.POST;           sendToURL(mailAddress);            thankyou.text = "Thank YOU!";           thename.text = "";           theemail.text = "";           thetime.text = "";           thepersons.text = "";           themessage.text = "";      } }
    H

    Thank you Kglad, I am going to see if I can make it work. I will let you know!
    Date: Thu, 13 Oct 2011 08:55:05 -0600
    From: [email protected]
    To: [email protected]
    Subject: I need help for actionscript 3, sending php info to my email, website created in Flash cs5 pro
        Re: I need help for actionscript 3, sending php info to my email, website created in Flash cs5 pro
        created by kglad in Action Script 3 - View the full discussion
    you missed part of the tutorial (or the tutorial is incomplete):  send_btn.addEventListener(MouseEvent.CLICK, fl_MouseClickHandler_13); function fl_MouseClickHandler_13(event:MouseEvent):void{     if (thename.text == "" || theemail.text == "" || thetime.text == "" || thepersons.text == "" || themessage.text == "") { thankyou.text = "please fill out all fields"; } else { // create a variable container var allVars : URLVariables = new URLVariables(); allVars.name = thename.text; allVars.email = theemail.text; allVars.time = thetime.text; allVars.persons = thepersons.text; allVars.message = themessage.text; //Send info to a URLvar mailAddress:URLRequest = new URLRequest("http.www.namewebsite.com/gdform.php"); mailAddress.data = allVars; mailAddress.method = URLRequestMethod.POST; sendToURL(mailAddress);
    }}  var urlLoader:URLLoader=new URLLoader(); function sendToURL(mailAddress):void{urlLoader.addEventListener(Event.COMPLETE,completeF);urlLoade r.load(mailAddress);} function completeF(e:Event):void{ thankyou.text = "Thank YOU!"; thename.text = ""; theemail.text = ""; thetime.text = ""; thepersons.text = ""; themessage.text = "";}
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3969414#3969414
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3969414#3969414. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Action Script 3 by email or at Adobe Forums
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • I Need Help for the popup message every time I go to safari: "Warning! Old version of Adobe Flash Player detected. Please download new version."???

    I Need Help for the popup message every time I go to safari: "Warning! Old version of Adobe Flash Player detected. Please download new version."???

    If you are talking about Safari on the iPad, there is no version of Adobe Flash for iOS and there never has been. Clear Safari, close the app and reset the iPad.
    Go to Settings>Safari>Clear History and Website Data
    In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
    If you are talking about Safari on your Mac, you are in the wrong forum. But I would still clear the cache, quit Safari and restart the Mac.

Maybe you are looking for