Need help for information about cisco AP

hi,
i'm actually writting a report about wireless LAN. inside this issue i would like to make comparison between cisco aironet 350 series AP with cisco aironet 1200 series AP in general. i've alreally make quite a number of attempt using google, but i still cant find the best info n solution. cant anyone help me??
thanks!!

Hi Vincent,
Here is some good info on the 350 and 1200AP's. Don't forget in your report to note that the 350 series is "End of Sale/End of Life";
Cisco Aironet 350 Series Access Points
http://www.cisco.com/en/US/products/hw/wireless/ps458/products_data_sheet09186a008009247c.html
Cisco Aironet 350 Series Product Literature
http://www.cisco.com/en/US/products/hw/wireless/ps458/prod_literature.html
Cisco Aironet Hardware Frequently Asked Questions
http://www.cisco.com/en/US/products/hw/wireless/ps430/products_qanda_item09186a0080094d01.shtml
Cisco Aironet 1200 Series Access Point
http://www.cisco.com/en/US/products/hw/wireless/ps430/products_data_sheet09186a00800937a6.html
Cisco Aironet 1200 Series Product Literature
http://www.cisco.com/en/US/products/hw/wireless/ps430/prod_literature.html
Cisco Aironet 1200 Series Access Point FAQ
http://www.cisco.com/en/US/products/hw/wireless/ps430/products_qanda_item09186a008009483e.shtml
Hope this helps! Good luck with your report.
Rob
Please remember to rate helpful posts........

Similar Messages

Need help finding information about a photo taken on my iphone, date, gps

I took a photo a few months ago and I still have the photo on my phone, I need to find out the date, time and GPS coords of the photo, I had an app a long while back that would do this and I am pretty sure its free but I have no idea what it was called and its long since been deleted. I dont care what app I have to buy I really need this info and the phone itself will only show the location on a map but not give me the rest (as far as I can tell).
Thanks!

I'm not sure which iPhone app provides for this, but a photo viewing software on your computer should.
Import the photo from your iPhone's Camera Roll with your computer and use a photo viewing software on your computer that reveals this data for the photo.

I need help for deploy an EJB to Oracle 8i

I want to deploy an EJB on Oracle8i, but my JDeveloper 3.2
doesn't have the option "Enterprise Java Bean to Oracle8i", it
has only the option "CORBA to Oracle8i" in the deploy wizard. Is
this correct?
JDeveloper 3.1 has the option "Enterprise Java Bean to Oracle8i"
in the deploy wizard. why doesn't Jdeveloper appear this option?
I need help or information about this.
thank you.

To copy the data of one account to another one, you can use the Shared folder, stored in /Users. You have to log in this user in order to copy the files to the folder, and then, log in the new user and copy the files to the folders where you want to store your files. Another option is to use an external drive.
To start by default with one account, open System Preferences > Login Options, and choose your old account next to "Automatic login"

Need help for user exit mereq001

Hi,
I need help for user exit mereq001. I think I messed up with include table CI_EBANDB and CI_EBANMEM. And When I tried to check the syntax . It gives me error like : <b>Class IF_PURCHASE_REQUISITION. Inconsistency in the dictionary for the structure mereq_item_s_cust_data.</b> Anyone had experience for this exit? I just need to extract costcenter information of the each item from the requisition and block the requisiton if the costcenter are differents from each other before the requisition is saved. Any one has idea about it?
Thanks.

biao,
Have you checked this struture consistency from SE11. Also check the activation log.
If there are any errors and you are not able to rectify the same use RSDDCHECK program, give your table name and run the report.
This will list down the error structures releated this table and also prompts for you to activate it.
Regds
Manohar

I need help for actionscript 3, sending php info to my email, website created in Flash cs5 pro

Hi, My name is David and I followed a course creating my own website from Lynda.com by Paul Trani. After that I created my first own webste. After I finished it, everything was working well in flash and firefox. I have only one problem and question concerning the feed back form for sending info from my website to my emailaddres. I created my website “LisbonDreamWalking”in Flash CS5 pro. I herein have a contact page, where people can send an email for a walk in Lisbon, date,the number of people etc. Now I want through my ISP / host funpic.org, that the input, info text fields to be sended to my emailaddress [email protected]. My mail URL adress iss: http://lisbondreamwalk.li.funpic.org This is a free host, so they don't work with forms like in the course, and I need some additional info for the php. Here is my HTML (Flash actionscript 3.0) for the sending I only have the red text to fill in (php), I was told by the adobe course.I really hope someone can help me?! Thanks in advance!
Instructions: 1. Add your custom code on a new line after the line that says "// Start your custom code" below. The code will execute when the symbol instance is clicked. */ send_btn.addEventListener(MouseEvent.CLICK, fl_MouseClickHandler_13); function fl_MouseClickHandler_13(event:MouseEvent):void {          if (thename.text == "" || theemail.text == "" || thetime.text == "" || thepersons.text == "" || themessage.text == "")      {           thankyou.text = "please fill out all fields";      }      else      {           // create a variable container           var allVars : URLVariables = new URLVariables();           allVars.name = thename.text;           allVars.email = theemail.text;           allVars.time = thetime.text;           allVars.persons = thepersons.text;           allVars.message = themessage.text;           //Send info to a URL           var mailAddress:URLRequest = new URLRequest("http.www.namewebsite.com/gdform.php");           mailAddress.data = allVars;           mailAddress.method = URLRequestMethod.POST;           sendToURL(mailAddress);           thankyou.text = "Thank YOU!";           thename.text = "";           theemail.text = "";           thetime.text = "";           thepersons.text = "";           themessage.text = "";      } }
H

Thank you Kglad, I am going to see if I can make it work. I will let you know!
Date: Thu, 13 Oct 2011 08:55:05 -0600
From: [email protected]
To: [email protected]
Subject: I need help for actionscript 3, sending php info to my email, website created in Flash cs5 pro
    Re: I need help for actionscript 3, sending php info to my email, website created in Flash cs5 pro
    created by kglad in Action Script 3 - View the full discussion
you missed part of the tutorial (or the tutorial is incomplete): send_btn.addEventListener(MouseEvent.CLICK, fl_MouseClickHandler_13); function fl_MouseClickHandler_13(event:MouseEvent):void{     if (thename.text == "" || theemail.text == "" || thetime.text == "" || thepersons.text == "" || themessage.text == "") { thankyou.text = "please fill out all fields"; } else { // create a variable container var allVars : URLVariables = new URLVariables(); allVars.name = thename.text; allVars.email = theemail.text; allVars.time = thetime.text; allVars.persons = thepersons.text; allVars.message = themessage.text; //Send info to a URLvar mailAddress:URLRequest = new URLRequest("http.www.namewebsite.com/gdform.php"); mailAddress.data = allVars; mailAddress.method = URLRequestMethod.POST; sendToURL(mailAddress);
}} var urlLoader:URLLoader=new URLLoader(); function sendToURL(mailAddress):void{urlLoader.addEventListener(Event.COMPLETE,completeF);urlLoade r.load(mailAddress);} function completeF(e:Event):void{ thankyou.text = "Thank YOU!"; thename.text = ""; theemail.text = ""; thetime.text = ""; thepersons.text = ""; themessage.text = "";}
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3969414#3969414
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3969414#3969414. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Action Script 3 by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Need some hardware information about PCI7030/6040E

Hi,
I'm working with LabViewRT and the PCI7030/6040E DAQ board. Everything works very well now, but I need some hardware information about this board for my dissertation. For example what kind of analog/digital converter does the bord use and so on.
Thanks for your help.
Regards,
tobyrt

TobyRT,
For questions of this nature, where you are requesting hardware specifications for our data acquisition boards, I would recommend that you contact National Instruments Technical Support.
I recommend that your contact method be via email where you can reach one of our Applications Engineers like myself. Please submit your email request via http://www.ni.com/ask.
Regards,
Justin Britten
Applications Engineer
National Instruments

Need help for Format HD

Hi I need Help for Formating HD so Wat Key need hold on start up for format HD I apprciated you Help

Jesus:
Formatting, Partitioning Erasing a Hard Disk Drive
Warning! This procedure will destroy all data on your Hard Disk Drive. Be sure you have an up-to-date, tested backup of at least your Users folder and any third party applications you do not want to re-install before attempting this procedure.
• With computer shut down insert install disk in optical drive.
• Hit Power button and immediately after chime hold down the "C" key.
• Select language
• Go to the Utilities menu (Tiger) Installer menu (Panther & earlier) and launch Disk Utility.
• Select your HDD (manufacturer ID) in left side bar.
• Select Partition tab in main panel. (You are about to create a single partition volume.)
• _Where available_ +Click on Options button+
+• Select Apple Partition Map (PPC Macs) or GUID Partition Table (Intel Macs)+
+• Click OK+
• Select number of partitions in pull-down menu above Volume diagram.
(Note 1: One partition is normally preferable for an internal HDD.)
• Type in name in Name field (usually Macintosh HD)
• Select Volume Format as Mac OS Extended (Journaled)
• Click Partition button at bottom of panel.
• Select Erase tab
• Select the sub-volume (indented) under Manufacturer ID (usually Macintosh HD).
• Check to be sure your Volume Name and Volume Format are correct.
• Click Erase button
• Quit Disk Utility.
cornelius

Need help for publishing web intelligence document (universe) into InfoView

Post Author: mirage
CA Forum: Publishing
Hello all,
I need help for publishing web intelligence document (universe) into InfoView.
can't find this information in Business Objects Designer's Guide and in Business Objects Administrator Guide.
Can somebody give short instructions how can I do it?
Regards, Slava

If the change between the 2 types of data has to happen dynamically during run time them
1. Use 2 dataproviders
a. Current
b. Historic
2. Merge the 2 dimensions
3. Use Webi variable to switch between the measure of the current and historic universe
Ex if [year] < 2010 then historic.[expense] else current.[expense]
Hope this helps,
Divya

Need help for access list problem

Cisco 2901 ISR
I need help for my configuration.... although it is working fine but it is not secured cause everybody can access the internet
I want to deny this IP range and permit only TMG server to have internet connection. My DHCP server is the 4500 switch.
Anybody can help?
         DENY       10.25.0.1 – 10.25.0.255
                          10.25.1.1 – 10.25.1.255
Permit only 1 host for Internet
                10.25.7.136 255.255.255.192 ------ TMG Server
Using access-list.
( Current configuration )
object-group network IP
description Block_IP
range 10.25.0.2 10.25.0.255
range 10.25.1.2 10.25.1.255
interface GigabitEthernet0/0
ip address 192.168.2.3 255.255.255.0
ip nat inside
ip virtual-reassembly in max-fragments 64 max-reassemblies 256
duplex auto
speed auto
interface GigabitEthernet0/1
description ### ADSL WAN Interface ###
no ip address
pppoe enable group global
pppoe-client dial-pool-number 1
interface ATM0/0/0
no ip address
no atm ilmi-keepalive
interface Dialer1
description ### ADSL WAN Dialer ###
ip address negotiated
ip mtu 1492
ip nat outside
no ip virtual-reassembly in
encapsulation ppp
dialer pool 1
dialer-group 1
ppp authentication pap callin
ppp pap sent-username xxxxxxx password 7 xxxxxxxxx
ip nat inside source list 101 interface Dialer1 overload
ip route 0.0.0.0 0.0.0.0 Dialer1
ip route 10.25.0.0 255.255.0.0 192.168.2.1
access-list 101 permit ip 10.25.0.0 0.0.255.255 any
access-list 105 deny   ip object-group IP any
From the 4500 Catalyst switch
( Current Configuration )
interface GigabitEthernet0/48
no switchport
ip address 192.168.2.1 255.255.255.0 interface GigabitEthernet2/42
ip route 0.0.0.0 0.0.0.0 192.168.2.3

Hello,
Host will can't get internet connection
I remove this configuration......         access-list 101 permit ip 10.25.0.0 0.0.255.255 any
and change the configuration ....      ip access-list extended 101
                                                            5 permit ip host 10.25.7.136 any
In this case I will allow only host 10.25.7.136 but it isn't work.
No internet connection from the TMG Server.

Need help for the $200 promo rebate for trade-in of I Phone 4

Need help for the $200 promo rebate for trade-in of I Phone 4. Unable to preregister when I ordered the new 6 in September. Now can not contact VZW recycle program regarding.

When I ordered my phone on Sept. 13th in a Verizon store, I had to ask the salesman how I went about getting the $200 rebate. He said shipping materials would come with the new phones. When I received the confirmation e-mail of my order, it contained a link for the rebate. Fortunately I clicked on the link, filled out the form online, and received the packing materials to send my phone in shortly after. My phones came in on Oct. 14th and I sent 3 of them back. So far I have received a gift card for $200 for 2 of the phones; the other is showing not received. I don't know what your situation is, but I think the promotion ended Oct. 15th. If I had listened to the salesman I think I would be out of luck as well. I hope I am wrong for your sake.

Need help for my ipod 5th gen

need help for my ipod 5th gen it was i cloud issue my cousin forgot her apple id and password ihave prof that we own these ipad because we have the receipt and its full package any one know how to reset the ipod so we can use it again??warranty is expired

Recover the ID and then the password by:
Is there a way to find my Apple ID Name if I can't remember it?
Yes. Visit My Apple ID and click Find your Apple ID. See Finding your Apple ID if you'd like more information.
How do I change or recover a forgotten Apple ID Password?
If you've forgotten your Apple ID Password or want to change it, go to My Apple ID and follow the instructions. See Changing your Apple ID password if you'd like more information.
Last, contact iTunes by:
Apple - Support - iTunes - Contact Us
or make an appointment at the Genius Bar of an Apple store. Bring your proof of purchase
Apple Retail Store - Genius Bar

I Need Help for the popup message every time I go to safari: "Warning! Old version of Adobe Flash Player detected. Please download new version."???

I Need Help for the popup message every time I go to safari: "Warning! Old version of Adobe Flash Player detected. Please download new version."???

If you are talking about Safari on the iPad, there is no version of Adobe Flash for iOS and there never has been. Clear Safari, close the app and reset the iPad.
Go to Settings>Safari>Clear History and Website Data
In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If you are talking about Safari on your Mac, you are in the wrong forum. But I would still clear the cache, quit Safari and restart the Mac.

By. i need help for photoshop connective...from 2 days ave a problem of connective.thank you

by i need help for my photoshop connective..if you ceck problem please.

Does your Cloud subscription properly show on your account page?
If you have more than one email, are you sure you are using the correct Adobe ID?
https://www.adobe.com/account.html for subscriptions on your Adobe page
If yes
Some general information for a Cloud subscription
Cloud programs do not use serial numbers... you log in to your paid Cloud account to download & install & activate... you MAY need to log out of the Cloud and restart your computer and log back in to the Cloud for things to work
Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
-Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
-http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
-http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
-ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp
If no
This is an open forum, not Adobe support... you need Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"

I have problem with buying in games , I got the massage that the purchased can not be completed , please contact iTunes support.. I need help for my case please

I have problem with buying in games , I got the massage that the purchased can not be completed , please contact iTunes support.. I need help for my case please

http://www.apple.com/support/itunes/contact/

Need help for my requirement...

Need help for my requirement...
Hello Experts,
I have report where users can input the company, housebank, account ID and posting date.
Now in one column of my report named 'Cash in Bank', I need to get all postings from cash
accounts with GL code ending in '0'. Now, I know that I can get the amounts in BSIS/BSAS
but how do I link it with the proper bank and account?
For example:
                   Cash in Bank
Bank A
Account ID 1     1,000,000
Account ID 2     25,000,000
Hope you can help me guys. Thank you and take care!

hi Viraylab,
each house bank you can find in table T012, in T012K you'll find the bank accounts to the housebank, the G/L account will be in T012K-HKONT.
hope this helps
ec

Need help for information about cisco AP

Similar Messages

Maybe you are looking for