Need help for J2EE Server0 failed starting

I am new in SAP and learning BI with ECC6.0 IDES. When I was doing BI-Java post-installation, I changed a little bit in EP, then J2EE Server0 failed to start, JVM exit code is -11113.
What I did is, in EP->System Administration->System Configuration->UME Configuration->SAP System, I changed the user/password from SAPJSF to J2EE_ADMIN because connection test failed. After change, the connection test succeed, so I save it. After restart, Server0 process in MMC failed with exit code -11113. I can not find any way to change it back because I can not access Portal any more.
I know it's stupid. Any help would be appreciated.
Shawn

Hi,
Have you tried to use the config tool? You might be able to make the change via the config tool as it can be accessed when the portal is stopped.
Here is some info from SAP Help on using the config tool: [http://help.sap.com/saphelp_nw70/helpdata/en/6f/258b2ef17d45a4afa45a00309a6a33/frameset.htm|http://help.sap.com/saphelp_nw70/helpdata/en/6f/258b2ef17d45a4afa45a00309a6a33/frameset.htm]
Hope this helps,
Simon

Similar Messages

  • Hi, I need help my computer is not starting up at all, nothing happening when I press the button on/off. The battery charger is working as using it for another laptop. Not sure what to do. Anyone have any idea? many thanks

    Hi, I need help my computer is not starting up at all, nothing happening when I press the button on/off. The battery charger is working as using it for another laptop. Not sure what to do. Anyone have any idea? many thanks

    You could try a SMC reset:
    http://support.apple.com/kb/HT3964
    If no change, do what Allan advises.
    Caio.

  • Hi, I need help for my notebook Macbook Pro - I turned on the notebook and the screen look like start but did not start nothing, the screen froze and continuing load, load and never stop.

    Hi, I need help for my notebook Macbook Pro - I turned on the notebook and the screen look like start but did not start nothing, the screen froze and continuing load, load and never stop

    screen look on

  • Need help for Format HD

    Hi I need Help for Formating HD so Wat Key need hold on start up for format HD I apprciated you Help

    Jesus:
    Formatting, Partitioning Erasing a Hard Disk Drive
    Warning! This procedure will destroy all data on your Hard Disk Drive. Be sure you have an up-to-date, tested backup of at least your Users folder and any third party applications you do not want to re-install before attempting this procedure.
    • With computer shut down insert install disk in optical drive.
    • Hit Power button and immediately after chime hold down the "C" key.
    • Select language
    • Go to the Utilities menu (Tiger) Installer menu (Panther & earlier) and launch Disk Utility.
    • Select your HDD (manufacturer ID) in left side bar.
    • Select Partition tab in main panel. (You are about to create a single partition volume.)
    • _Where available_ +Click on Options button+
    +• Select Apple Partition Map (PPC Macs) or GUID Partition Table (Intel Macs)+
    +• Click OK+
    • Select number of partitions in pull-down menu above Volume diagram.
    (Note 1: One partition is normally preferable for an internal HDD.)
    • Type in name in Name field (usually Macintosh HD)
    • Select Volume Format as Mac OS Extended (Journaled)
    • Click Partition button at bottom of panel.
    • Select Erase tab
    • Select the sub-volume (indented) under Manufacturer ID (usually Macintosh HD).
    • Check to be sure your Volume Name and Volume Format are correct.
    • Click Erase button
    • Quit Disk Utility.
    cornelius

  • I need help for actionscript 3, sending php info to my email, website created in Flash cs5 pro

    Hi,  My name is David and I followed a course creating my own website from Lynda.com by Paul Trani. After that I created my first own webste. After I finished it, everything was working well in flash and firefox. I have only one problem and question concerning the feed back form for sending info from my website to my emailaddres. I created my website “LisbonDreamWalking”in Flash CS5 pro. I herein have a contact page, where people can send an email for a walk in Lisbon, date,the number of people etc. Now I want through my ISP / host funpic.org, that the input, info text fields to be sended to my emailaddress [email protected]. My mail URL adress  iss: http://lisbondreamwalk.li.funpic.org  This is a free host, so they don't work with forms like in the course, and I need some additional info for the php. Here is my HTML (Flash actionscript 3.0) for the sending I only have the red text to fill in (php), I was told by the adobe course.I really hope someone can help me?! Thanks in advance!
    Instructions: 1. Add your custom code on a new line after the line that says "// Start your custom code" below. The code will execute when the symbol instance is clicked. */  send_btn.addEventListener(MouseEvent.CLICK, fl_MouseClickHandler_13);  function fl_MouseClickHandler_13(event:MouseEvent):void {          if (thename.text == "" || theemail.text == "" || thetime.text == "" || thepersons.text == "" || themessage.text == "")      {           thankyou.text = "please fill out all fields";      }      else      {           // create a variable container           var allVars : URLVariables = new URLVariables();           allVars.name = thename.text;           allVars.email = theemail.text;           allVars.time = thetime.text;           allVars.persons = thepersons.text;           allVars.message = themessage.text;           //Send info to a URL           var mailAddress:URLRequest = new URLRequest("http.www.namewebsite.com/gdform.php");           mailAddress.data = allVars;           mailAddress.method = URLRequestMethod.POST;           sendToURL(mailAddress);            thankyou.text = "Thank YOU!";           thename.text = "";           theemail.text = "";           thetime.text = "";           thepersons.text = "";           themessage.text = "";      } }
    H

    Thank you Kglad, I am going to see if I can make it work. I will let you know!
    Date: Thu, 13 Oct 2011 08:55:05 -0600
    From: [email protected]
    To: [email protected]
    Subject: I need help for actionscript 3, sending php info to my email, website created in Flash cs5 pro
        Re: I need help for actionscript 3, sending php info to my email, website created in Flash cs5 pro
        created by kglad in Action Script 3 - View the full discussion
    you missed part of the tutorial (or the tutorial is incomplete):  send_btn.addEventListener(MouseEvent.CLICK, fl_MouseClickHandler_13); function fl_MouseClickHandler_13(event:MouseEvent):void{     if (thename.text == "" || theemail.text == "" || thetime.text == "" || thepersons.text == "" || themessage.text == "") { thankyou.text = "please fill out all fields"; } else { // create a variable container var allVars : URLVariables = new URLVariables(); allVars.name = thename.text; allVars.email = theemail.text; allVars.time = thetime.text; allVars.persons = thepersons.text; allVars.message = themessage.text; //Send info to a URLvar mailAddress:URLRequest = new URLRequest("http.www.namewebsite.com/gdform.php"); mailAddress.data = allVars; mailAddress.method = URLRequestMethod.POST; sendToURL(mailAddress);
    }}  var urlLoader:URLLoader=new URLLoader(); function sendToURL(mailAddress):void{urlLoader.addEventListener(Event.COMPLETE,completeF);urlLoade r.load(mailAddress);} function completeF(e:Event):void{ thankyou.text = "Thank YOU!"; thename.text = ""; theemail.text = ""; thetime.text = ""; thepersons.text = ""; themessage.text = "";}
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3969414#3969414
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3969414#3969414. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Action Script 3 by email or at Adobe Forums
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • I Need Help for the popup message every time I go to safari: "Warning! Old version of Adobe Flash Player detected. Please download new version."???

    I Need Help for the popup message every time I go to safari: "Warning! Old version of Adobe Flash Player detected. Please download new version."???

    If you are talking about Safari on the iPad, there is no version of Adobe Flash for iOS and there never has been. Clear Safari, close the app and reset the iPad.
    Go to Settings>Safari>Clear History and Website Data
    In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
    If you are talking about Safari on your Mac, you are in the wrong forum. But I would still clear the cache, quit Safari and restart the Mac.

  • Pls i need help for this simple problem. i appreciate if somebody would share thier ideas..

    pls i need help for this simple problem of my palm os zire 72. pls share your ideas with me.... i tried to connect my palm os zire72 in my  desktop computer using my usb cable but i can't see it in my computer.. my palm has no problem and it works well. the only problem is that, my  desktop computer can't find my palm when i tried to connect it using usb cable. is thier any certain driver or installer needed for it so that i can view my files in my palm using the computer. where i can download its driver? is there somebody can help me for this problem? just email me pls at [email protected] i really accept any suggestions for this problem. thanks for your help...

    If you are using Windows Vista go to All Programs/Palm and click on the folder and select Hot Sync Manager and then try to sync with the USB cable. If you are using the Windows XP go to Start/Programs/Palm/Hot Sync Manager and then try to sync. If you don’t have the palm folder at all on your PC you have to install it. Here is the link http://kb.palm.com/wps/portal/kb/common/article/33219_en.html that version 4.2.1 will be working for your device Zire 72.

  • I have problem with buying in games , I got the massage that the purchased can not be completed , please contact iTunes support.. I need help for my case please

    I have problem with buying in games , I got the massage that the purchased can not be completed , please contact iTunes support.. I need help for my case please

    http://www.apple.com/support/itunes/contact/

  • Need help for my requirement...

    Need help for my requirement...
    Hello Experts,
    I have report where users can input the company, housebank, account ID and posting date.
    Now in one column of my report named 'Cash in Bank', I need to get all postings from cash
    accounts with GL code ending in '0'. Now, I know that I can get the amounts in BSIS/BSAS
    but how do I link it with the proper bank and account?
    For example:
                       Cash in Bank
    Bank A
      Account ID 1     1,000,000
      Account ID 2     25,000,000
    Hope you can help me guys. Thank you and take care!

    hi Viraylab,
    each house bank you can find in table T012, in T012K you'll find the bank accounts to the housebank, the G/L account will be in T012K-HKONT.
    hope this helps
    ec

  • Need help for flash builder

    i need help for flash builder 4 and papervison 3d. I need to create a slider with it ranges of value from 10 to 50 to adjust the camera values for the camera.fov and also need to create it for the yaw of the object from 0 to 360. I try to look for any slider event and classes in this program but cant find any, btw, i need to use the AS only project file.
    here is my codes:
    can you please tell me how i should modify the codes?
    package
        import flash.display.BitmapData;
        import flash.display.Sprite;
        import flash.events.Event;
        import org.papervision3d.materials.BitmapFileMaterial;
        import org.papervision3d.materials.BitmapMaterial;
        import org.papervision3d.objects.primitives.Sphere;
        import org.papervision3d.view.BasicView;
        [SWF (width="800", height="600", backgroundColor="0x000000",frameRate="30")]
        public class EarthBitmap extends BasicView
            private var sphere:Sphere;
            public function EarthBitmap()
                super(800 , 600);
                var earthmaterial:BitmapFileMaterial = new BitmapFileMaterial("../assets/Earth.jpg");
                sphere = new Sphere(earthmaterial,100,20,18);
                camera.fov = 25;
                scene.addChild(sphere);
                addEventListener(Event.ENTER_FRAME,rotateSphere);
            public function rotateSphere(evt:Event):void
                sphere.yaw(0.2);
                singleRender();

    Turn the click handler into a full on separate function. Then store all the views in an array and use Math.rand() to randomly choose one.
    Something like this:
    <fx:Script>
         <![CDATA[
              var questionsArray:Array = {question2,question3,question5,questionRed,questionGeography};
              function buttonClickHandler(event:MouseEvent){
                   var randomProblem:int = Math.floor(Math.random()*(questionsArray.length));     //generates a random integer between 0 and the total number of questions in the array (arrays are 0-based)
                   navigator.pushView(questionsArray[randomProblem]);
         ]]>
    </fx:Script>
    <s:Button id="randomProblemButton" label="Next Problem" click="buttonClickHandler(event)" />
    Haven't tested that, but something along that line should work

  • Need help for importing oracle 10G dump into 9i database

    hi, Someone help me to import oracle 10G dump into 9i database. I'm studying oracle . Im using oracle 10G developer suite(downloaded from oracle) and oracle 9i database. I saw some threads tat we can't import the higher version dumps into lower version database. But i'm badly need help for importing the dump...
    or
    someone please tell me the site to download oracle 9i Developer suite as i can't find it in oracle site...

    I didnt testet it to import a dump out of a 10g instance into a 9i instance if this export has been done using a 10g environment.
    But it is possible to perform an export with a 9i environment against a 10g instance.
    I am just testing this with a 9.2.0.8 environment against a 10.2.0.4.0 instance and is working so far.
    The system raises an EXP-00008 / ORA-37002 error after exporting the data segments (exporting post-schema procedural objects and actions).
    I am not sure if it is possible to perform an import to a 9i instance with this dump but maybe worth to give it a try.
    It should potentially be possible to export at least 9i compatible objects/segments with this approach.
    However, I have my doubts if this stunt is supported by oracle ...
    Message was edited by:
    user434854

  • Need Help for Nokia 6500 slide

    Hi all I'm A new Guy here ,
    But I do really need help for hard reset my phone
    I already try *#7073# But It doesn't work ,
    If Anybody know to make a hard reset please help

    rwss wrote:
    I'v got te same problem with my 6500 Slide, is there a button combination that we have to press
    to hard reset the 6500 Slide?!
    How does the 6500 slide hard reset?
    That's simple.
    All you have to do is:
    From MENU goto SETTINGS, When there scroll down and select 'Restore Factory Setting'.
    There are two options in there:
    "Restore Settings only"
    and
    "Restore all"
    Select "Restore All"
    When done the phone will delete every thing on the Phone memory(C:\)(contacts,picture,messages etc)
    and also restore phone to its original settings and will restart.
    This proceedure is mostly common on S40 phone.
    Hope this explain and solve the problem.

  • Need help for publishing web intelligence document (universe) into InfoView

    Post Author: mirage
    CA Forum: Publishing
    Hello all,
    I need help for publishing web intelligence document (universe) into InfoView.
    can't find this information in Business Objects Designer's Guide and in Business Objects Administrator Guide.
    Can somebody give short instructions how can I do it?
    Regards, Slava

    If the change between the 2 types of data has to happen dynamically during run time them
    1. Use 2 dataproviders
         a. Current
         b. Historic
    2. Merge the 2 dimensions
    3. Use Webi variable to switch between the measure of the current and historic universe
    Ex  if [year] < 2010 then historic.[expense] else current.[expense]
    Hope this helps,
    Divya

  • Need help for access list problem

    Cisco 2901 ISR
    I need help for my configuration.... although it is working fine but it is not secured cause everybody can access the internet
    I want to deny this IP range and permit only TMG server to have internet connection. My DHCP server is the 4500 switch.
    Anybody can help?
             DENY       10.25.0.1 – 10.25.0.255
                              10.25.1.1 – 10.25.1.255
    Permit only 1 host for Internet
                    10.25.7.136  255.255.255.192 ------ TMG Server
    Using access-list.
    ( Current configuration  )
    object-group network IP
    description Block_IP
    range 10.25.0.2 10.25.0.255
    range 10.25.1.2 10.25.1.255
    interface GigabitEthernet0/0
    ip address 192.168.2.3 255.255.255.0
    ip nat inside
    ip virtual-reassembly in max-fragments 64 max-reassemblies 256
    duplex auto
    speed auto
    interface GigabitEthernet0/1
    description ### ADSL WAN Interface ###
    no ip address
    pppoe enable group global
    pppoe-client dial-pool-number 1
    interface ATM0/0/0
    no ip address
    no atm ilmi-keepalive
    interface Dialer1
    description ### ADSL WAN Dialer ###
    ip address negotiated
    ip mtu 1492
    ip nat outside
    no ip virtual-reassembly in
    encapsulation ppp
    dialer pool 1
    dialer-group 1
    ppp authentication pap callin
    ppp pap sent-username xxxxxxx password 7 xxxxxxxxx
    ip nat inside source list 101 interface Dialer1 overload
    ip route 0.0.0.0 0.0.0.0 Dialer1
    ip route 10.25.0.0 255.255.0.0 192.168.2.1
    access-list 101 permit ip 10.25.0.0 0.0.255.255 any
    access-list 105 deny   ip object-group IP any
    From the 4500 Catalyst switch
    ( Current Configuration )
    interface GigabitEthernet0/48
    no switchport
    ip address 192.168.2.1 255.255.255.0 interface GigabitEthernet2/42
    ip route 0.0.0.0 0.0.0.0 192.168.2.3

    Hello,
    Host will can't get internet connection
    I remove this configuration......         access-list 101 permit ip 10.25.0.0 0.0.255.255 any
    and change the configuration ....      ip access-list extended 101
                                                                5 permit ip host 10.25.7.136 any
    In this case I will allow only host 10.25.7.136 but it isn't work.
    No internet connection from the TMG Server.

  • Need help for cenvat reversal

    Hi Friends,
    Need help for cenvat reversal.
    Reversed MIRO by MR8M & MIGO by 102 movement but not able to post & cancel cenvat by J1IEX.
    In table J_1IEXCHDR status = "P" and J1I5 does not update for document of 102 movement because reversal document of MIGO, i.e. material document with 102 movement type does not have excise tab. MBSM-Cancelled Material Documents, does not show any of the material documents.
    Want to reverse the cenvat credit, please help.
    --Anil Bhamere

    Hi,
    If I select Cancellation in MIGO then there is only Material Document option.
    In MIGO Purchase Order option shows for Goods Receipt, Goods Issue and Subsequet Adj.
    In this case I have been selected Goods Receipt option followed by purchase order number by which original goods receipt MIGO was created, selected 102 movement type and from line item respective MIGO document. The reversal document created successfully where as original MIGO document does not show in cancelled document list. When post option selected from J1IEX and entered vendor excise number then message appeared as No Part I exists for availing credit in excise invoice xxxxx.
    If Cancel option selected from J1IEX and entered vendor excise number then message appeared as Excise invoice xxxx has already been posted for vendor xxxxx.
    Please help.
    Regards,
    Anil Bhamere

Maybe you are looking for