Need Help for my MSI gt60 0NE f3 hotkey

Hi guys, i brought MSI gt60 0NE october 2013 i installed games but now i want it back to factory reset. i used f3 hotkey for factory reset.
the question is after pressing f3 I should have an msi recovery manager pop up, but that is not what is happening. After pressing f3 the windows boot manager comes up. Under choose an operating system windows 7 is highlighted and I press enter. then system recovery option pop up (with the list of Repair your Computer,Systems Recovery etc.) instead of MSI manager option.
im looking for MSI manager option rather than system recovery option...

Not much you can do. Opening is pretty much a no go with tablets so a repair at your expense might be the only chance.

Similar Messages

Need help regarding SSD - MSI GT60 2PE

Hi all,
I have purchased a "GT60 2PE DOMINATOR PRO", but I don't quite understand what this means:
Quote
Up to 384GB Super RAID 2 + 750GB HDD 7200rpm
Specifically, the "Super RAID 2" stuff. The particular model I'm getting has a 1TB 7200rpm HDD, and no SSD.
My question is, will a "Samsung 840 EVO 250GB 2.5 inch Basic SATA Solid State Drive" be compatible? I don't understand what size or type any of these SSD's are. This is my first time with a high-end computer. Sorry for the lack of links by the way, apparently I'm not allowed post 'em.
Thanks in advance!

Quote from: pilsnermonkey on 18-June-14, 04:59:03
I'm not certain whether or not your model is set up for Super RaID. I has a similar question that is explained here: https://forum-en.msi.com/index.php?topic=180343.msg1297750#msg1297750
The laptop must be configured with the Super Raid adapter. I thought all the Dom Pro's came with it and was disappointed to discover that is not the case.
I purchased a 500GB Samsung SSD following that bit of disappointing news and intended on doing a clean Windows install on the new SSD ... I planned on then using my 1TB drive that came with my GT70 Dom Pro as storage. I discovered that I can't do a clean install on the SSD without purchasing ANOTHER copy of Win 8.1. Seriously.
Looking for solutions at this thread: https://forum-en.msi.com/index.php?topic=181164.0
While some of this is true, some is not.
You do NOT need to purchase another copy of Windows 8.1....You need to use the MSI Burn Recovery disks that you should have made after turning the notebook on for the first time to install Windows onto your new SSD. I've done this, many other users have done this, it's what you do to install a new SSD/HDD.
As for the SuperRaid, since the model the user is buying only has a single 1TB HDD in it, it will NOT have SuperRaid adapter, and they would need to purchase a 2.5" SSD in order to install an SSD into the laptop.

Request for unlocked bios / swap keys MSI GT60 0NE-220US

Hi I want the unlocked BIOS + swap keys from this topic: https://forum-en.msi.com/index.php?topic=163049.0 for the MSI GT60 0NE-220US [will donate]
And also another question, can you do the same for an HP Folio (13-1050) ? (bios unlock + swap keys)
Thanks!

Post BIOS & EC versions of GT60 0NE-220US, look in bios setup system info.
Quote
And also another question, can you do the same for an HP Folio (13-1050) ? (bios unlock + swap keys)
not sure, email me with more info about it so i can check. but not here since we do not support non msi products.

Compatibility Upgrade in MSI GT60-0NE

Hi i have a question in my MSI GT60 0NE-403US laptop.
it is that possible to upgrade my HDD to SSD?
if yes what brand and size is compatible? and theres a 2 slot of HDD can i put 2 SSD?
I want to upgrade also the RAM upgrade 12gb elixir 1600. what brand and compatible RAM?
Thank you alot.
Cheers

Quote from: RX-8 on 15-May-15, 14:01:53
Yes, you can replace the 2.5 HDD to the same 2.5-inch SSD. For the recommended brand and size, since it's an old model, you can easily google some info on the Internet for reference.
About the RAM upgrade, you need to notice if it's DDR3L (low-voltage, 1.35V).
if it's not DDR3L aka 1.35v ram
just get all new ram DDR3L and swap it will save your battery life and drop CPU temps a little

MSi GT60 0NE Which HDD bay that supports port SATAIII?

Hi,
I'm going to upgrade my notebook MSi GT60 0NE with OCZ Vertex 4 (256GB) will it be compatible with my notebook?
And which one is the HDD bay with the SataIII / Sata3 ?
Is it the one with a purple circle or the yellow one?

Quote from: Hearny on 15-May-13, 08:42:03
Hey Jim,
From what I have read/heard from MSI reps in Aus, the model (same as which I am importing) will not come with the RAID0 adapter, it is capable but the bridge will need to be bought separately. It should have one SATAII port which the 750GB RPM HDD will be mounted and nothing in the SATAIII bay. Making it quick and easy to drop in a single SSD or purchase the RAID bridge and some mSATA SSD's. I still havent decided if I will go single or RAID yet :P
Svet and Darkhawk are a wealth of information in these forums, so if I'm wrong they will be happy to assist with any more questions
Hearny
CORRECTION: "It should have one SATAII port which the 750GB RPM HDD will be mounted and nothing in the SATAIII bay." This information is not from MSI reps this is from a local MSI retailer, where the tech said he only had to fit the RAID0 adapter, no mention of moving 750GB RPM HDD to the secondary bay.
As far as I'm aware, this information is true. This is similar to how my laptop came configured, except I had the model with the RAID adapter and a single SSD installed.
The only thing I'm not 100% sure of is if they include the second (SATA III port) board. I would ASSUME they do, but I do not know this for sure that they do as I haven't bought one without the RAID adapter.
From a personal standpoint, I really enjoy the raid adapter. It's a great feature, and really provides tremendous performance in a very small package. I took the 128 GB SSD that came with my laptop out, bought a mSATA to SATA adapter and gave it to a friend so he could use it in his desktop. I then put 2 x Mushkin Atlas Deluxe 240 GB drives in my laptop, and it performs exceptionally well with 0 problems.
Just my thoughts.....

MSI GT60 0NE-404US all games crash after 10 minutes of play?

Hi I've just recently purchased a MSI GT60 0NE-404US with gtx680m 4g video card, i7 3630m CPU and 12g of ram. I took it home and ran a few games on it, all of them after basically 10 minutes the game will crash and something along the lines of "the graphic driver has crashed and restarted". I've tried updating my video driver to the latest and rerolled to older drivers, none of that worked. I've used hardware monitor and tried to see the GPU temperature, they seem to be running at 50-60 degrees celsius if I turn the turbo fan on. I've tried running some benchmarking software to test out the stability of the 3d graphics but the same problem occurs. it looks like it's a drivers problem but I've tried all types of drivers and none of them worked.
Does anybody have any similar issues? This is a brandnew laptop and things like this shouldn't happen.
Any advice is greatly appreciated!

Quote from: helohelo on 13-February-14, 13:36:30
Hi I've just recently purchased a MSI GT60 0NE-404US with gtx680m 4g video card, i7 3630m CPU and 12g of ram. I took it home and ran a few games on it, all of them after basically 10 minutes the game will crash and something along the lines of "the graphic driver has crashed and restarted". I've tried updating my video driver to the latest and rerolled to older drivers, none of that worked. I've used hardware monitor and tried to see the GPU temperature, they seem to be running at 50-60 degrees celsius if I turn the turbo fan on. I've tried running some benchmarking software to test out the stability of the 3d graphics but the same problem occurs. it looks like it's a drivers problem but I've tried all types of drivers and none of them worked.
Does anybody have any similar issues? This is a brandnew laptop and things like this shouldn't happen.
Any advice is greatly appreciated!
Nichrome gives some good advice. I'd follow his steps first but...
I kinda get the feeling that your video card is not any good and it's what is causing the issues. The fact that you've tried a few different driver revisions and it's crashing doing anything stressful seems to indicate that as well.
Most likely you'll need to contact MSI to do an RMA in the end.
>>How to contact MSI.<<

MSI GT60 0NE-404US mSata/SSD/HD?

Hi I've recently purchased a MSI GT60 0NE-404US from ncix.com. The computer itself came with a standard 5400rpm HD. I'm looking at upgrading it with a SSD and now here are some questions:
Does the computer have 2 2.5" HD bays?
Does it have a mSata port so I can simply buy a mSata SSD?
Can I use the SuperRaid function as advertised?
Because I've reading the forums and online but none of them have the correct information regarding the my exact model. I just want to make sure which SSD is supported so I can make the correct purchase.
Much appreciated!

The only way to find out what you can use it to open the bottom of the laptop up and see what is there.
If you see a 'card' where the hard drive should be, then you have a SuperRaid card. If you don't have a card there, then you probably have another normal SATA port for a 2.5" HDD.
That's the only way to truly know, as the resellers (such as NCIX) can change and customize it for you and who knows what it really is.

I have problem with buying in games , I got the massage that the purchased can not be completed , please contact iTunes support.. I need help for my case please

I have problem with buying in games , I got the massage that the purchased can not be completed , please contact iTunes support.. I need help for my case please

http://www.apple.com/support/itunes/contact/

*UPDATED 7/15/04* Complete guide to bioses, drivers, and needed files for the MSI K8N Neo Platinum

Complete newbie's guide to bioses, drivers, and needed files for the MSI K8N Neo Platinum:
Last Updated: Thursday July 15th, 2004
Bioses:
(In order of date released.)
1.1b3 - (Download)
- Pre-1.1, given to reviewers to use in their reviews and benchmarks.
- Less stable, but supposedly you get slightly better overclocks.
1.1 Official - (Download)
1. This is AWARD BIOS release
2. This BIOS fixes the following problems of the previous version:
- Memory always run DDR 200 when install single side DDR on DIMM2 & DIMM3.
- Windows 2000 can't format the RAID IDE HDD when plug in Promise 378 controller.
1.2b5 - (Download)
1.2b7 - (No Download Yet)
1.2b10 - (Download)
- First attempt to fix false temperature readings. Fixes it for some people with Newcastle cores and doesn't fix it for anybody with Clawhammer cores.
1.2b12 - (Download)
- Second attempt to fix false temperature readings. Fixes it for some people with Newcastle cores and some people with Clawhammer cores.
1.3b1 - (Download)
- Another attempt to fix temperature problems?
- Possibly fixes cold boot/power light issues?
1.2 Official - (Download)
1. This is AWARD BIOS release
2. This BIOS fixes the following problems of the previous version:
- System can't resume from S3 sometimes when install USB device.
- Support K8 Sempron CPU.
- Turn off keyboard LED in S3.
--Quick Guide for flashing BIOS, provided by MSI--
1. Create a MS-DOS boot diskette, then copy the the .exe and the bios file to the floppy disk. Both of these files can be found in the package you downloaded.
2. Press "Delete" and go to BIOS setup while computer bootup.
Check BIOS advanced features and see if BIOS flash write control is enabled
(This option must be enabled. If you can not find this setting, it means the BIOS can be
flashed.)
3. Boot from MS-DOS boot diskette and get a:\> prompt.
4. Type "", then press ENTER
5. The flash program will then ask "Do you want to save BIOS?", please press "N" for no. The when you see Press 'Y' to program or 'N' to Exit, please press "Y" to continue.
6. After flashing complete, remove floppy and reset the system .
7. Press DELETE or F1 when prompted at first reboot after flashing.
8. Load BIOS optimized defaults, then save settings and exits.
Drivers & Needed Files:
(Note: All these drivers are for Windows XP.)
Leaked Nvidia nForce3 Chipset Drivers Version 4.40
(Please use at your own risk, these are LEAKED drivers. Password for the .zip file is "ocworkbench rules". Also, you will need to rename the WinXP_2K folder in IDE to either WinXP or Win2K else the installer doesn't pick it up.) Thanks for the link Wonkanoby!
*NEW* Leaked Nvidia nForce3 Chipset Drivers Version 5.03
More leaked drivers? Seems some parts of the drivers are older and some are newer.
1. Windows XP Service Pack 1A (Web Install) -or- Windows XP Service Pack 1A (Full Install)
2. Microsoft DirectX 9.0b (Web Install) -or- Microsoft DirectX 9.0b (Full Install)
3. Nvidia nForce3 Chipset Drivers Version 4.24
4. AMD Athlon 64 Processor Driver Version 1.1.0.14
5. Nvidia Video Card Driver Version 56.72 -or- Omega Nvidia Video Card Driver Version v1.5303
(The Omega drivers are third party drivers optimized for gaming, most prefer these over the standard Nvidia drivers.)
5. ATI Video Card Driver Version 4.7 -or- Omega ATI Video Card Driver Version 2.5.51
(The Omega drivers are third party drivers optimized for gaming, most prefer these over the standard ATI drivers.)
6. Onboard Sound Driver (Realtek AC'97 Audio Codec) Version A3.61
It is HIGHLY reccomended that you install the drivers/needed files in the order listed above. Please note that there are two #5's because you either install one or the other depending on your video card, do not install both of them.
You will come across a problem here though. You can't install the chipset drivers without installing the Windows service pack and DirectX first, but the Windows service pack and DirectX installs need the internet to download files and you won't have working internet until you install the chipset drivers. Here's what I did to get around this. Instead of downloading the web install versions of Windows service pack and DirectX, download the full version and and put them along with all the other drivers on a backup hard drive or burn them to a CD, this way you will have all the drivers you need when it's time to install them and none of them will require the internet to download files.
Another note when installing drivers. Apparently the Nvidia chipset drivers also come with drivers for the onboard sound, but people seem to agree that the Realtek onboard sound drivers are better. When you are installing the Nvidia chipset drivers, just be sure to uncheck the box for sound drivers when it asks you which drivers you would like to install. Now you can safely install the Realtek drivers without any chance of conflicting sound drivers. Thanks for the tip Wonkanoby!

Quote
Originally posted by RLiu818
Quote
Originally posted by Deviation56
Quote
Originally posted by RLiu818
You CAN install the nforce drivers BEFORE installing SP1. The only requirement to install the nforce drivers is DX9.
So is SP1 still recommended to install before the nforce drivers?
The installer still reccomends to install it beforehand for full USB 2.0 functionality... I would have put what you said in there but I wanted to keep it as simple as possible.
oh. IIRC the installer just says USB 2.0 will be fully functional after SP1 is installed. So after you install SP1 you go into device manager and u click update driver and it will auto search and update the driver.
Simplicity-wise, i guess its pretty much equal. It might take less preparation to just copy DX9 full onto a CD and install that first, then nforce driver, then right away you have yoru internet connection.
but i dunno.. i guess i will try it your way this time when my RMA"d board comes.
i will be fomratting and doing a fresh install later on today and will let you know if i come across any problems

Need help for Format HD

Hi I need Help for Formating HD so Wat Key need hold on start up for format HD I apprciated you Help

Jesus:
Formatting, Partitioning Erasing a Hard Disk Drive
Warning! This procedure will destroy all data on your Hard Disk Drive. Be sure you have an up-to-date, tested backup of at least your Users folder and any third party applications you do not want to re-install before attempting this procedure.
• With computer shut down insert install disk in optical drive.
• Hit Power button and immediately after chime hold down the "C" key.
• Select language
• Go to the Utilities menu (Tiger) Installer menu (Panther & earlier) and launch Disk Utility.
• Select your HDD (manufacturer ID) in left side bar.
• Select Partition tab in main panel. (You are about to create a single partition volume.)
• _Where available_ +Click on Options button+
+• Select Apple Partition Map (PPC Macs) or GUID Partition Table (Intel Macs)+
+• Click OK+
• Select number of partitions in pull-down menu above Volume diagram.
(Note 1: One partition is normally preferable for an internal HDD.)
• Type in name in Name field (usually Macintosh HD)
• Select Volume Format as Mac OS Extended (Journaled)
• Click Partition button at bottom of panel.
• Select Erase tab
• Select the sub-volume (indented) under Manufacturer ID (usually Macintosh HD).
• Check to be sure your Volume Name and Volume Format are correct.
• Click Erase button
• Quit Disk Utility.
cornelius

Need help for my requirement...

Need help for my requirement...
Hello Experts,
I have report where users can input the company, housebank, account ID and posting date.
Now in one column of my report named 'Cash in Bank', I need to get all postings from cash
accounts with GL code ending in '0'. Now, I know that I can get the amounts in BSIS/BSAS
but how do I link it with the proper bank and account?
For example:
                   Cash in Bank
Bank A
Account ID 1     1,000,000
Account ID 2     25,000,000
Hope you can help me guys. Thank you and take care!

hi Viraylab,
each house bank you can find in table T012, in T012K you'll find the bank accounts to the housebank, the G/L account will be in T012K-HKONT.
hope this helps
ec

Need help for flash builder

i need help for flash builder 4 and papervison 3d. I need to create a slider with it ranges of value from 10 to 50 to adjust the camera values for the camera.fov and also need to create it for the yaw of the object from 0 to 360. I try to look for any slider event and classes in this program but cant find any, btw, i need to use the AS only project file.
here is my codes:
can you please tell me how i should modify the codes?
package
    import flash.display.BitmapData;
    import flash.display.Sprite;
    import flash.events.Event;
    import org.papervision3d.materials.BitmapFileMaterial;
    import org.papervision3d.materials.BitmapMaterial;
    import org.papervision3d.objects.primitives.Sphere;
    import org.papervision3d.view.BasicView;
    [SWF (width="800", height="600", backgroundColor="0x000000",frameRate="30")]
    public class EarthBitmap extends BasicView
        private var sphere:Sphere;
        public function EarthBitmap()
            super(800 , 600);
            var earthmaterial:BitmapFileMaterial = new BitmapFileMaterial("../assets/Earth.jpg");
            sphere = new Sphere(earthmaterial,100,20,18);
            camera.fov = 25;
            scene.addChild(sphere);
            addEventListener(Event.ENTER_FRAME,rotateSphere);
        public function rotateSphere(evt:Event):void
            sphere.yaw(0.2);
            singleRender();

Turn the click handler into a full on separate function. Then store all the views in an array and use Math.rand() to randomly choose one.
Something like this:
<fx:Script>
     <![CDATA[
          var questionsArray:Array = {question2,question3,question5,questionRed,questionGeography};
          function buttonClickHandler(event:MouseEvent){
               var randomProblem:int = Math.floor(Math.random()*(questionsArray.length));     //generates a random integer between 0 and the total number of questions in the array (arrays are 0-based)
               navigator.pushView(questionsArray[randomProblem]);
     ]]>
</fx:Script>
<s:Button id="randomProblemButton" label="Next Problem" click="buttonClickHandler(event)" />
Haven't tested that, but something along that line should work

Need help for importing oracle 10G dump into 9i database

hi, Someone help me to import oracle 10G dump into 9i database. I'm studying oracle . Im using oracle 10G developer suite(downloaded from oracle) and oracle 9i database. I saw some threads tat we can't import the higher version dumps into lower version database. But i'm badly need help for importing the dump...
or
someone please tell me the site to download oracle 9i Developer suite as i can't find it in oracle site...

I didnt testet it to import a dump out of a 10g instance into a 9i instance if this export has been done using a 10g environment.
But it is possible to perform an export with a 9i environment against a 10g instance.
I am just testing this with a 9.2.0.8 environment against a 10.2.0.4.0 instance and is working so far.
The system raises an EXP-00008 / ORA-37002 error after exporting the data segments (exporting post-schema procedural objects and actions).
I am not sure if it is possible to perform an import to a 9i instance with this dump but maybe worth to give it a try.
It should potentially be possible to export at least 9i compatible objects/segments with this approach.
However, I have my doubts if this stunt is supported by oracle ...
Message was edited by:
user434854

Need Help for Nokia 6500 slide

Hi all I'm A new Guy here ,
But I do really need help for hard reset my phone
I already try *#7073# But It doesn't work ,
If Anybody know to make a hard reset please help

rwss wrote:
I'v got te same problem with my 6500 Slide, is there a button combination that we have to press
to hard reset the 6500 Slide?!
How does the 6500 slide hard reset?
That's simple.
All you have to do is:
From MENU goto SETTINGS, When there scroll down and select 'Restore Factory Setting'.
There are two options in there:
"Restore Settings only"
and
"Restore all"
Select "Restore All"
When done the phone will delete every thing on the Phone memory(C:\)(contacts,picture,messages etc)
and also restore phone to its original settings and will restart.
This proceedure is mostly common on S40 phone.
Hope this explain and solve the problem.

Need help for publishing web intelligence document (universe) into InfoView

Post Author: mirage
CA Forum: Publishing
Hello all,
I need help for publishing web intelligence document (universe) into InfoView.
can't find this information in Business Objects Designer's Guide and in Business Objects Administrator Guide.
Can somebody give short instructions how can I do it?
Regards, Slava

If the change between the 2 types of data has to happen dynamically during run time them
1. Use 2 dataproviders
a. Current
b. Historic
2. Merge the 2 dimensions
3. Use Webi variable to switch between the measure of the current and historic universe
Ex if [year] < 2010 then historic.[expense] else current.[expense]
Hope this helps,
Divya

Need Help for my MSI gt60 0NE f3 hotkey

Similar Messages

Maybe you are looking for