Need help for my P67 GD55 with Corsair Vengeance

Hello, all
I just bought MSI gd 55 with corsair vengenance
http://www.newegg.com/Product/Product.aspx?Item=N82E16820233142&cm_re=vengenance-_-20-233-142-_-Product
The default setting by MB is 1333Mhz when I first turn it on. So I manually set them all to the corsair speed. (including SPD timing)
It won't boot with 1.53v voltage.
K, so I set it to 1600MHz, it rran smoothly and the system was stable even in high stress gaming.
However, when I did a fresh start up.....it won't boot again and boost me back to 1333 Mhz..
I have been tried this like 3 times now, I already sent a ticket to Corsair, will see what happen
Because newegg is accepting return due to 67 chpiest issue, if it won't work due to the incomplaity between MB and corsair.
Guess i should pick up Asus MB again which my old one was using (X48)
I'm not sure what's the problem from, the MB or memory
Anyone has an idea? I hate to fill up a MSI ticket due to it's long enough to write...It's headach

-------------__________________--------------------------
Was the intel's chipest issue all about SATA 2 internal voltage ?
I think it has nothing to do with the memory's speed.
At least, corsair works fine with my old asus X48...........Probably asus is the last brand I can choose. Gigabyte is also garbage, my old x38 only last 2 months, then it was dead....repaired.........4 more weeks, it was dead again.
Finally, newegg replaced a asus x48 from gigabyte x38.
Then, the asus x48 never stop working again.
"Here's the thing we can confirm, the problem is to be found solely in the SATA 300 controller, the SATA 600 controllers are unaffected as well as any other added controllers on your motherboard.
On the up-to four SATA2 (SATA 300) ports in a timeframe measured over years, your performance failure rate 5% to 15% based on standard usage. The controller simply will produce more errors and as that result the controller performance thus will go down as it tries to correct it. Worst case scenario is that the overhead would get so big that your HDD/SSD would not be recognized in Windows any longer. These predictions are all based on statistical numbers though
"

Similar Messages

Need help for connecting Ms Acces with java Swing in Mac OS

Hi all,
i need to connect to Ms Access in MAc os through my java swing program.
Is it possible for accessing Ms access through dsn in Mac OS.
If Possible which driver shall i use for Establishing Connection with MS Access in Mac OS.
Suggestion is needed urgently.
Can anybody help me out regarding this..
Thanks in advance.
Regards,
sreand

if I don't find a better solution I'll try your 2nd option but what do you mean by "combo" update?
My understanding is to simply insert the OS 10.5 installation CD, reinstall the OS and the just keep updating it via the OS SSoftware update panel and stop untill I see the scary Java 8 update. Is that what you meant?
While you can do it that way, the combo update picks up operating system updates through a collection of releases. When dealing with operating system upgrades, I've found using the combo updates to be more reliable than Software Update, as sometimes Software Update doesn't apply updates correctly, and weird things can happen. Doesn't happen often though, thankfully.
So the OS X 10.5.5 Combo update contains all updates between 10.5.0 and 10.5. The 10.5.8 combo update contains the updates from 10.5 thru 10.8. Here are the updates:
10.5 combo update: http://support.apple.com/kb/DL692
10.8 combo update: http://support.apple.com/kb/DL866
If you go down the combo path, repair permissions before and after doing each update. Then do Software Update for any other non-OS X updates, and don't apply the Java Update 8.

Need help for storing time along with the date

Hi,
I have one procedure as follows, In last_update_column of the table job_data having date and time.But after execution of this procedure only date is inserting into the job_master.
If I queires the table job_master with to_char(Last_Update_Date, 'DD-MM-YYYY HH24:MI:SS') , then it is showing time as 12:00:00.
I tried to insert date with to_char,to_date format but it is not working.
Please provide me the solution.
Thanks in advance.
create or replace
PROCEDURE         SP_LOAD_JOB
IS
CURSOR CUR_DATA IS
        SELECT   PARENT_ITEM,
     `               CHILD_ITEM_ID,
               LAST_UPDATE_DATE
FROM job_data,
BEGIN
For Cursor_job In CUR_DATA
             Loop
             Exit When CUR_DATA%Notfound;
    Insert Into job_master(parent_Code,
                                   child_code,
                                   last_update_date)
values(
                         Cursor_job.PARENT_ITEM,
                         Cursor_job.CHILD_ITEM_ID, ,
                         Cursor_job.Assembly_Item_Id,
                          Cursor_Bom.LAST_UPDATE_DATE)
commit;
end loop;
END;

Hi,
I don't believe you
First to input time to job_master from job_data table first you have to store time in job_data.
execute
select LAST_UPDATE_DATE from job_data
and show result.
Second remark : your procedure will not compile success Because
    Insert Into job_master(parent_Code,
                                   child_code,
                                   last_update_date) ---3columns
   values(
                         Cursor_job.PARENT_ITEM,
                         Cursor_job.CHILD_ITEM_ID, ,
                         Cursor_job.Assembly_Item_Id,
                          Cursor_Bom.LAST_UPDATE_DATE) ----4columns
Third remark : why to insert into table from other you wrote procedure???! you need only type insert stmt like this
    Insert Into job_master(parent_Code,
                                   child_code,
                                   last_update_date)
    select .... from job_data
Ramin Hashimzade

I need Help for Connect To DB2 with JDBC

I'd like to know why I Have this problem.
The DB2 v 5.10 is in a IBM OS/390
I know the IP, PORt, DBNAME and I'd like to connect to DB2 with my windows XP using JDCB from IBM.
I use JDBC Universal for DB2 type 4.
Class.forName("com.ibm.db2.jcc.DB2Driver");
Url = "jdbc:db2://IP:PORT/BDNAME";
DriverManager.getConnection.... (url, user, pass)..
If I execute this, I have next problem
SQL state = null
Error code = -4499
There is no available conversion for the source code page, 1208, to the target code page, "". DB2ConnectionCorrelator: null
Why is this?
Finally, the web application will running in a AIX IBM with machine, It could be that this machine (aix) can connect with the IBM OS/390 with JDBC for iBM?
Thankss!!!

Check how you configured the IP on the laptop and computers, assigned by router with DHCP feature enabled? Or configure manually? If it's assigned by wireless router, then make sure you assign big enough IP range in DHCP setting. Take a look on using ping to troubleshoot network and wireless router configuration articles to help you more..

I need help for a mac book with no delete key

i watched some tutorials and some of the stages required the use of a deleted key (to undo a shape creation in pages, deleting a column in pages) and i was wondering how to do these tasks without a delete key.

Kils wrote:
i watched some tutorials and some of the stages required the use of a deleted key (to undo a shape creation in pages, deleting a column in pages) and i was wondering how to do these tasks without a delete key.
I presume your delete key is broken. With text files you can mouseover and hit the space bar, but I cannot imagine not having a delete key.
If you are referring to the Unix style delete (delete to right of cursor) as opposed to the backspace, you use the Fn-delete combination which makes the delete behave that way.

I have problem with buying in games , I got the massage that the purchased can not be completed , please contact iTunes support.. I need help for my case please

I have problem with buying in games , I got the massage that the purchased can not be completed , please contact iTunes support.. I need help for my case please

http://www.apple.com/support/itunes/contact/

Need help for Format HD

Hi I need Help for Formating HD so Wat Key need hold on start up for format HD I apprciated you Help

Jesus:
Formatting, Partitioning Erasing a Hard Disk Drive
Warning! This procedure will destroy all data on your Hard Disk Drive. Be sure you have an up-to-date, tested backup of at least your Users folder and any third party applications you do not want to re-install before attempting this procedure.
• With computer shut down insert install disk in optical drive.
• Hit Power button and immediately after chime hold down the "C" key.
• Select language
• Go to the Utilities menu (Tiger) Installer menu (Panther & earlier) and launch Disk Utility.
• Select your HDD (manufacturer ID) in left side bar.
• Select Partition tab in main panel. (You are about to create a single partition volume.)
• _Where available_ +Click on Options button+
+• Select Apple Partition Map (PPC Macs) or GUID Partition Table (Intel Macs)+
+• Click OK+
• Select number of partitions in pull-down menu above Volume diagram.
(Note 1: One partition is normally preferable for an internal HDD.)
• Type in name in Name field (usually Macintosh HD)
• Select Volume Format as Mac OS Extended (Journaled)
• Click Partition button at bottom of panel.
• Select Erase tab
• Select the sub-volume (indented) under Manufacturer ID (usually Macintosh HD).
• Check to be sure your Volume Name and Volume Format are correct.
• Click Erase button
• Quit Disk Utility.
cornelius

Need help for my requirement...

Need help for my requirement...
Hello Experts,
I have report where users can input the company, housebank, account ID and posting date.
Now in one column of my report named 'Cash in Bank', I need to get all postings from cash
accounts with GL code ending in '0'. Now, I know that I can get the amounts in BSIS/BSAS
but how do I link it with the proper bank and account?
For example:
                   Cash in Bank
Bank A
Account ID 1     1,000,000
Account ID 2     25,000,000
Hope you can help me guys. Thank you and take care!

hi Viraylab,
each house bank you can find in table T012, in T012K you'll find the bank accounts to the housebank, the G/L account will be in T012K-HKONT.
hope this helps
ec

Need help for flash builder

i need help for flash builder 4 and papervison 3d. I need to create a slider with it ranges of value from 10 to 50 to adjust the camera values for the camera.fov and also need to create it for the yaw of the object from 0 to 360. I try to look for any slider event and classes in this program but cant find any, btw, i need to use the AS only project file.
here is my codes:
can you please tell me how i should modify the codes?
package
    import flash.display.BitmapData;
    import flash.display.Sprite;
    import flash.events.Event;
    import org.papervision3d.materials.BitmapFileMaterial;
    import org.papervision3d.materials.BitmapMaterial;
    import org.papervision3d.objects.primitives.Sphere;
    import org.papervision3d.view.BasicView;
    [SWF (width="800", height="600", backgroundColor="0x000000",frameRate="30")]
    public class EarthBitmap extends BasicView
        private var sphere:Sphere;
        public function EarthBitmap()
            super(800 , 600);
            var earthmaterial:BitmapFileMaterial = new BitmapFileMaterial("../assets/Earth.jpg");
            sphere = new Sphere(earthmaterial,100,20,18);
            camera.fov = 25;
            scene.addChild(sphere);
            addEventListener(Event.ENTER_FRAME,rotateSphere);
        public function rotateSphere(evt:Event):void
            sphere.yaw(0.2);
            singleRender();

Turn the click handler into a full on separate function. Then store all the views in an array and use Math.rand() to randomly choose one.
Something like this:
<fx:Script>
     <![CDATA[
          var questionsArray:Array = {question2,question3,question5,questionRed,questionGeography};
          function buttonClickHandler(event:MouseEvent){
               var randomProblem:int = Math.floor(Math.random()*(questionsArray.length));     //generates a random integer between 0 and the total number of questions in the array (arrays are 0-based)
               navigator.pushView(questionsArray[randomProblem]);
     ]]>
</fx:Script>
<s:Button id="randomProblemButton" label="Next Problem" click="buttonClickHandler(event)" />
Haven't tested that, but something along that line should work

Need help for importing oracle 10G dump into 9i database

hi, Someone help me to import oracle 10G dump into 9i database. I'm studying oracle . Im using oracle 10G developer suite(downloaded from oracle) and oracle 9i database. I saw some threads tat we can't import the higher version dumps into lower version database. But i'm badly need help for importing the dump...
or
someone please tell me the site to download oracle 9i Developer suite as i can't find it in oracle site...

I didnt testet it to import a dump out of a 10g instance into a 9i instance if this export has been done using a 10g environment.
But it is possible to perform an export with a 9i environment against a 10g instance.
I am just testing this with a 9.2.0.8 environment against a 10.2.0.4.0 instance and is working so far.
The system raises an EXP-00008 / ORA-37002 error after exporting the data segments (exporting post-schema procedural objects and actions).
I am not sure if it is possible to perform an import to a 9i instance with this dump but maybe worth to give it a try.
It should potentially be possible to export at least 9i compatible objects/segments with this approach.
However, I have my doubts if this stunt is supported by oracle ...
Message was edited by:
user434854

Need Help for Nokia 6500 slide

Hi all I'm A new Guy here ,
But I do really need help for hard reset my phone
I already try *#7073# But It doesn't work ,
If Anybody know to make a hard reset please help

rwss wrote:
I'v got te same problem with my 6500 Slide, is there a button combination that we have to press
to hard reset the 6500 Slide?!
How does the 6500 slide hard reset?
That's simple.
All you have to do is:
From MENU goto SETTINGS, When there scroll down and select 'Restore Factory Setting'.
There are two options in there:
"Restore Settings only"
and
"Restore all"
Select "Restore All"
When done the phone will delete every thing on the Phone memory(C:\)(contacts,picture,messages etc)
and also restore phone to its original settings and will restart.
This proceedure is mostly common on S40 phone.
Hope this explain and solve the problem.

Need help for cenvat reversal

Hi Friends,
Need help for cenvat reversal.
Reversed MIRO by MR8M & MIGO by 102 movement but not able to post & cancel cenvat by J1IEX.
In table J_1IEXCHDR status = "P" and J1I5 does not update for document of 102 movement because reversal document of MIGO, i.e. material document with 102 movement type does not have excise tab. MBSM-Cancelled Material Documents, does not show any of the material documents.
Want to reverse the cenvat credit, please help.
--Anil Bhamere

Hi,
If I select Cancellation in MIGO then there is only Material Document option.
In MIGO Purchase Order option shows for Goods Receipt, Goods Issue and Subsequet Adj.
In this case I have been selected Goods Receipt option followed by purchase order number by which original goods receipt MIGO was created, selected 102 movement type and from line item respective MIGO document. The reversal document created successfully where as original MIGO document does not show in cancelled document list. When post option selected from J1IEX and entered vendor excise number then message appeared as No Part I exists for availing credit in excise invoice xxxxx.
If Cancel option selected from J1IEX and entered vendor excise number then message appeared as Excise invoice xxxx has already been posted for vendor xxxxx.
Please help.
Regards,
Anil Bhamere

Need help for finding objects impacted by size change for an infoobject

hi all,
need help for finding objects impacted by size change
for xxx infoobject, due to some requirements, the size to be changed from
char(4) to char(10), in the source database tables as well as adjustment
to be done in BI side.
this infoobject xxx is nav attribute of YYY as well as for WWW
infoobjects. and xxx is loaded from infopkg for www infoobject load.
now that i have to prepare an impact analysis doc for BI side.
pls help me with what all could be impacted and what to be done as a
solution to implement the size change.
FYI:
where used list for xxx infoobject - relveals these object types :
infocubes,
infosources,
tranfer rules,
DSO.
attribute of characteristic,
nav attribute,
ref infoobject,
in queries,
in variables

Hi Swetha,
You will have to manually make the table adjustments in all the systems using SE14 trans since the changes done using SE14 cannot be collected in any TR.
How to adjust tables :
Enter the table name in SE14. For ex for any Z master data(Say ZABCD), master data table name would be /BIC/PZABCD, text table would be /BIC/TZABCD. Similarly any DSO(say ZXYZ) table name would be /BIC/AZXYZ00 etc.
Just enter the table name in SE14 trans --> Edit --> Select the radio button "Save Data" --> Click on Activate & adjust database table.
NOTE : Be very careful in using SE14 trans since there is possibility that the backend table could be deleted.
How to collect the changes in TR:
You can collect only the changes made to the IO --> When you activate, it will ask you for the TR --> Enter the correct package name & create a new TR. If it doesn't prompt you for TR, just goto Extras --> Write transport request from the IO properties Menu screen. Once these IO changes are moved successfully, then the above proceduce can be followed using SE14 trans.
Hope it helps!
Regards,
Pavan

Need help for writing extract program

hi
i need help for writing extract program to retriew data from legacy system.
i already developed bdc programs for me31k and me21.
my requirement is to write extract program s for those t.codes.
to retriew data from legacy system and stored in flat file.

i need help with a java program. it is a program that allows the user to enter a student's GPA, number of extracurricular activities, and number of service activities. The user can not enter a gpa above 4.0 or below 0. The user can not enter a negative number for the number of both activities. If the student meets the following criteria: 1) GPA of 3.8 or above and at least one extracurricular activity and one service activity, 2) GPA below 3.8 but at least 3.4 and a total of at least three extracurricular and service activities, 3) GPA below 3.4 but at least 3.0 and at least two extracurricular activities and three service activities, the message "Scholarship candidate" should display. If the student does not meet the criteria above, then the message"not a candidate" should display. Can you help me, please?
You haven't posted ANY 'java program' for us to help with.
The forum is NOT a coding service. It is to help you with YOUR code.
Post the code you have written and SHOW us (don't just tell us) how you compile it and execute it and the results you get. Then we can help you with any problems you are are having.
If you need help understanding just what the program should be doing you need to ask your instructor to clarify the assignment.

Need help for user exit mereq001

Hi,
I need help for user exit mereq001. I think I messed up with include table CI_EBANDB and CI_EBANMEM. And When I tried to check the syntax . It gives me error like : <b>Class IF_PURCHASE_REQUISITION. Inconsistency in the dictionary for the structure mereq_item_s_cust_data.</b> Anyone had experience for this exit? I just need to extract costcenter information of the each item from the requisition and block the requisiton if the costcenter are differents from each other before the requisition is saved. Any one has idea about it?
Thanks.

biao,
Have you checked this struture consistency from SE11. Also check the activation log.
If there are any errors and you are not able to rectify the same use RSDDCHECK program, give your table name and run the report.
This will list down the error structures releated this table and also prompts for you to activate it.
Regds
Manohar

Need help for my P67 GD55 with Corsair Vengeance

Similar Messages

Maybe you are looking for