Need help for nokia 6070

Hello!
I have had my nokia 6070 for several years, never been a problem with it, ecept i changed the screen once, but yesterday the main switch broke off its contacts:/ and the battery has flatted out, so even after i have charged it, i cant manage to start it. one of the pins on the switch has broken off entirly, so even after i soldered it on, there is no functuin:/ does anyone have the printcard diagram that shows how the power cercuit goes? so i can jump start it??
the reason i do this much work for it, is because i have so many contacts on the phone!! i need to have them out somehow! if any one know other ways of extracting contacts without starting the phone(it has som cind of standby power when the charger is plugged in) please tell!!
also intrested in where I can get a new switch for it. so i might get it to work again.
best regards, nokia enthusiast Tistlo in norway.

Unfortunately upon this manufacturer's sponsored forum discussion concerning disassembly of devices or posting of schematics is forbidden.
Happy to have helped forum in a small way with a Support Ratio = 37.0

Similar Messages

Need Help for Nokia 6500 slide

Hi all I'm A new Guy here ,
But I do really need help for hard reset my phone
I already try *#7073# But It doesn't work ,
If Anybody know to make a hard reset please help

rwss wrote:
I'v got te same problem with my 6500 Slide, is there a button combination that we have to press
to hard reset the 6500 Slide?!
How does the 6500 slide hard reset?
That's simple.
All you have to do is:
From MENU goto SETTINGS, When there scroll down and select 'Restore Factory Setting'.
There are two options in there:
"Restore Settings only"
and
"Restore all"
Select "Restore All"
When done the phone will delete every thing on the Phone memory(C:\)(contacts,picture,messages etc)
and also restore phone to its original settings and will restart.
This proceedure is mostly common on S40 phone.
Hope this explain and solve the problem.

Need help for Nokia 6265i

Worked great on my PC w/PC Sync for Outlook contacts & calendars. Now I'm up with Mac, need to make it work there. No help from Nokia, doubtful any would come from apple. Any takers? Suggestions?
Thanks!

I've only used the trial version of this software but am tempted to buy the full version:
http://www.apple.com/downloads/macosx/productivity_tools/phonedirector.html

Need help for nokia 6230i for transfering videos

Does anybody know,how can I insert videos in my phone Nokia6230i,I converted some file in mp4,but when I insert a video on my phone and I tried to play,but it appear like (?)file format not supported).PC suite supports just mp3,mp4,aac,m3u.I need help from anybody who knows that,and what is solution of this problem..thanx a lot.cheers!Message Edited by xhengi on 30-Sep-2006
03:34 AM

rwss wrote:
I'v got te same problem with my 6500 Slide, is there a button combination that we have to press
to hard reset the 6500 Slide?!
How does the 6500 slide hard reset?
That's simple.
All you have to do is:
From MENU goto SETTINGS, When there scroll down and select 'Restore Factory Setting'.
There are two options in there:
"Restore Settings only"
and
"Restore all"
Select "Restore All"
When done the phone will delete every thing on the Phone memory(C:\)(contacts,picture,messages etc)
and also restore phone to its original settings and will restart.
This proceedure is mostly common on S40 phone.
Hope this explain and solve the problem.

NEED HELP FOR NOKIA-3250

I have a nokia-3250 and installed PC SUITE version 6.83.14.1 and my os is windows xp servive pack2. the PC SUITE works for all other application except for MUSIC MANAGER.Basicaly it does not react at all nor it shows any error message.
i am in need of help.
anyone out there to help me?

Music Manager creates some registry entries to registry path HKEY_CURRENT_USER\Software\Nokia\Music Manager. Delete that Music Manager key, reboot your computer and try again.

ARGENTLY NEEDED HELP for nokia 5200

HI TO EVERY ONE.
i am using nokia 5200.from 2 days its sopped working;
display is showing but key pad not working,only 9 and * buttons working,nothing is opening,i can not access into anything(menu,music,camera)nothing!!!i am getting important bank messages,but i can not open then;they r very important to me;also my main problem is fear of loosing data;there r lots of contacts and information in inbox messages;
please any one give me information about getting data back,mostly my lovable phone working;please help me.

It sounds like your phone has a serious problem.
It may be ok internally and just the connection to the keyboard and screen is defective.
Try installing nokia pc suite on your computer and then backing it up via a cable connection. You may also be able to get your stuff such as your pictures messages etc off it with PC suite and a cable connection.
Then I think you need to take it to your nearest Nokia care point for them to take a look at it.
Hope this helps
Shunts...
Message Edited by shuntfield on 12-Sep-2008 12:37 AM
I will mostly be communicating with a Nokia E72 Zodium Black
Nokia E72-1 with Vr 051.018.207.04 Software
If this post helped... Add some kudos!!

Need help for nokia 6131

how to start timer... which runs with the call

I do not think that you can start a timer whilst making a call but you can turn on a setting under the call settings called called summery. When turned on this gives you the details of the call you just made or received. The information is given only for a few seconds after the call has ended.
OR
after the call has ended you can go into your calls received and select details for the information about the call, which includes the length of call.
i hope this helps, rob.

I need help for NOKIA 6288 please

hy!
i got my nokia 6288 recently. does anyone knows how to hide that irritant BACK and STOP signs when you watch videos full screen on it?
thanx, Vox
p.s. sorry if i posted this in wrong topic cause i am new here!=)
Edit/Delete Message

No, just tried it. They're obviously there so users know how to stop the playback or return to horizontal screen mode, but it's not the best design with the words overlapping the video-clip. There are no other options available whilst playing videos in full screen mode.

Need help for Nokia 500

Could anyone help me? always when someone calls me, my display will turn off automatically, and can not see who is calling me..The same thing happens when I call somebody ....

Does the phone have a screen protector, case or anything else covering the front of it? If so remove it and see if it works normally. Some cases/protectors have been known to prevent the proximity sensor from functioning correctly.

I have problem with buying in games , I got the massage that the purchased can not be completed , please contact iTunes support.. I need help for my case please

I have problem with buying in games , I got the massage that the purchased can not be completed , please contact iTunes support.. I need help for my case please

http://www.apple.com/support/itunes/contact/

Need help for Format HD

Hi I need Help for Formating HD so Wat Key need hold on start up for format HD I apprciated you Help

Jesus:
Formatting, Partitioning Erasing a Hard Disk Drive
Warning! This procedure will destroy all data on your Hard Disk Drive. Be sure you have an up-to-date, tested backup of at least your Users folder and any third party applications you do not want to re-install before attempting this procedure.
• With computer shut down insert install disk in optical drive.
• Hit Power button and immediately after chime hold down the "C" key.
• Select language
• Go to the Utilities menu (Tiger) Installer menu (Panther & earlier) and launch Disk Utility.
• Select your HDD (manufacturer ID) in left side bar.
• Select Partition tab in main panel. (You are about to create a single partition volume.)
• _Where available_ +Click on Options button+
+• Select Apple Partition Map (PPC Macs) or GUID Partition Table (Intel Macs)+
+• Click OK+
• Select number of partitions in pull-down menu above Volume diagram.
(Note 1: One partition is normally preferable for an internal HDD.)
• Type in name in Name field (usually Macintosh HD)
• Select Volume Format as Mac OS Extended (Journaled)
• Click Partition button at bottom of panel.
• Select Erase tab
• Select the sub-volume (indented) under Manufacturer ID (usually Macintosh HD).
• Check to be sure your Volume Name and Volume Format are correct.
• Click Erase button
• Quit Disk Utility.
cornelius

Need help for my requirement...

Need help for my requirement...
Hello Experts,
I have report where users can input the company, housebank, account ID and posting date.
Now in one column of my report named 'Cash in Bank', I need to get all postings from cash
accounts with GL code ending in '0'. Now, I know that I can get the amounts in BSIS/BSAS
but how do I link it with the proper bank and account?
For example:
                   Cash in Bank
Bank A
Account ID 1     1,000,000
Account ID 2     25,000,000
Hope you can help me guys. Thank you and take care!

hi Viraylab,
each house bank you can find in table T012, in T012K you'll find the bank accounts to the housebank, the G/L account will be in T012K-HKONT.
hope this helps
ec

Need help for flash builder

i need help for flash builder 4 and papervison 3d. I need to create a slider with it ranges of value from 10 to 50 to adjust the camera values for the camera.fov and also need to create it for the yaw of the object from 0 to 360. I try to look for any slider event and classes in this program but cant find any, btw, i need to use the AS only project file.
here is my codes:
can you please tell me how i should modify the codes?
package
    import flash.display.BitmapData;
    import flash.display.Sprite;
    import flash.events.Event;
    import org.papervision3d.materials.BitmapFileMaterial;
    import org.papervision3d.materials.BitmapMaterial;
    import org.papervision3d.objects.primitives.Sphere;
    import org.papervision3d.view.BasicView;
    [SWF (width="800", height="600", backgroundColor="0x000000",frameRate="30")]
    public class EarthBitmap extends BasicView
        private var sphere:Sphere;
        public function EarthBitmap()
            super(800 , 600);
            var earthmaterial:BitmapFileMaterial = new BitmapFileMaterial("../assets/Earth.jpg");
            sphere = new Sphere(earthmaterial,100,20,18);
            camera.fov = 25;
            scene.addChild(sphere);
            addEventListener(Event.ENTER_FRAME,rotateSphere);
        public function rotateSphere(evt:Event):void
            sphere.yaw(0.2);
            singleRender();

Turn the click handler into a full on separate function. Then store all the views in an array and use Math.rand() to randomly choose one.
Something like this:
<fx:Script>
     <![CDATA[
          var questionsArray:Array = {question2,question3,question5,questionRed,questionGeography};
          function buttonClickHandler(event:MouseEvent){
               var randomProblem:int = Math.floor(Math.random()*(questionsArray.length));     //generates a random integer between 0 and the total number of questions in the array (arrays are 0-based)
               navigator.pushView(questionsArray[randomProblem]);
     ]]>
</fx:Script>
<s:Button id="randomProblemButton" label="Next Problem" click="buttonClickHandler(event)" />
Haven't tested that, but something along that line should work

Need help for importing oracle 10G dump into 9i database

hi, Someone help me to import oracle 10G dump into 9i database. I'm studying oracle . Im using oracle 10G developer suite(downloaded from oracle) and oracle 9i database. I saw some threads tat we can't import the higher version dumps into lower version database. But i'm badly need help for importing the dump...
or
someone please tell me the site to download oracle 9i Developer suite as i can't find it in oracle site...

I didnt testet it to import a dump out of a 10g instance into a 9i instance if this export has been done using a 10g environment.
But it is possible to perform an export with a 9i environment against a 10g instance.
I am just testing this with a 9.2.0.8 environment against a 10.2.0.4.0 instance and is working so far.
The system raises an EXP-00008 / ORA-37002 error after exporting the data segments (exporting post-schema procedural objects and actions).
I am not sure if it is possible to perform an import to a 9i instance with this dump but maybe worth to give it a try.
It should potentially be possible to export at least 9i compatible objects/segments with this approach.
However, I have my doubts if this stunt is supported by oracle ...
Message was edited by:
user434854

Need help for publishing web intelligence document (universe) into InfoView

Post Author: mirage
CA Forum: Publishing
Hello all,
I need help for publishing web intelligence document (universe) into InfoView.
can't find this information in Business Objects Designer's Guide and in Business Objects Administrator Guide.
Can somebody give short instructions how can I do it?
Regards, Slava

If the change between the 2 types of data has to happen dynamically during run time them
1. Use 2 dataproviders
a. Current
b. Historic
2. Merge the 2 dimensions
3. Use Webi variable to switch between the measure of the current and historic universe
Ex if [year] < 2010 then historic.[expense] else current.[expense]
Hope this helps,
Divya

Need help for nokia 6070

Similar Messages

Maybe you are looking for