Need help for the installation of one key theater and the improper working of touchpad
hi can anybody tell me how can i install one key theater in g560 laptop running on win 7 32 bit OS as me trying to install it but it doesnt work.
How to solve the touchpad issue in g560 as sometimes the touchpad stops funtioning or not sensing the finger movement.
Hi and Welcome to the Community!
I'm not sure, from your description, exactly what you are looking for. "Username" and "E-mail"? Are you perhaps looking for the ability to enter a "reply-to" email address that is different from the actual email address of the account you are sending from? If so, that feature is indeed not presently available in BB10. Among other features, it may be one that many hope are added to the BB10 platform with future OS releases. But, for now, it is what it is.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Similar Messages
-
Hi, I need help for my notebook Macbook Pro - I turned on the notebook and the screen look like start but did not start nothing, the screen froze and continuing load, load and never stop
screen look on
-
Need help for PeopleSoft Installation - PeopleSoft Database configuration
Hello,
I am working on the step that requires me to put in Admin User, Admin Password, PeopleSoft Symbolic ID, PeopleSoft Access ID, PeopleSoft Access Password, PeopleSoft Connect ID, PeopleSoft Connect Password, Microsoft SQL server Data file name & Microsoft SQL server Log file name.
When i pressed the Next button, this came out:
Setup fails to connect to the SQL Server in the system. the error message is: noerror. Please make sure a SQL Server is running in the system. The minimum supported version is SQL Server 2008. Please go to previous screen to correct the problems or 'Cancel' to exit.
Thanks in advance and really appreciate your help :)First of all are your running SQL Server 2008?
Second if you are, then you should provide the correct syntax for sql server wich is (if you installed sql server according the installation manual ) [machinename]\SQL2008
Hakan -
Need Help for Page Design Technique: Level 0 Record and Level 1 Record
Folks,
Hello. I am developing HR system for a client. I design a page for "Position Information" as follows:
Level 0 record fields:
Position Number: 01
Status: Open
Because many people are in this position, level 1 record is a scroll area containing many rows belong to this Position Number as follows:
Level 1 record fields:
Profile ID: 001 effective date: xx/xx/xxxx
Profile ID: 002 effective date: xx/xx/xxxx
After save the page into Database, the data in Level 1 record table doesn't match the data in Level 0 record table.
No way to identify the rows of data in Level 1 record table belong to a specific row of data in Level 0 record table.
I need help to design the Database, that is 2 tables: many rows in second table belong to one row in first table.
Can any folks give some idea to design such a Database so that save the Page correctly ?Table 2 should have all the key fields from Table 1, followed by atleast one more key of its own.
Subhash -
How do I measure the period of one TTL signal and the delay until a second TTL signal?
Hi,
I have a PCI 6024E board, the SCB-68 terminal box and am running LabView 6.1. If needed I could install 7.1.
I have two Honeywell sensors (HOA7720) which each consist of an infrared transmitter and a infrared reciever. When the beam is broken they output 5V, when the beam is open it outputs 0V. These are sensing the presence of a hole in two discs passing thru the sensors.
So as disc 1 rotates the signal is 5V until the hole passes thru sensor 1, then it drops to 0V until the hole passes. Then it jumps back to 5 V.
Disc 2 is rotating at exactly the same RPM as disc 1 because they are coupled with a spring loaded coupling. There is a delay between the first hole passing thru sensor 1 and the second hole passing thru sensor 2. The delay increases with torque.
Using the oscilliscope function and connecting Signal1 and Signal2 to AIn0 and AIn1, I have verified that the TTL signals are there. So electrically everything is working. I just need to know how to measure the period and delay. I'm familiar with A/D, but not with counters/gates etc and I think that's what is required here.
The first measurement needed is RPM. Somehow I need to measure the period of the TTL signal.
The second measurement needed is the delay between the 1st falling edge and the 2nd falling edge.
I don't think it's possible to use the millisecond timer for anything, because the accuracy wouldn't be good enough. At 3600RPM the disc will spin 60 revs per second, or one every 17ms. A resolution of 17 samples per revolution is not good enough.
Help please!It worked!
I ended up figuring it out today. It's really simple. I went analog in to AIn14 and AIn15 which were free. Then the program does a multichannel scan of the signals (collects array of 2 waveforms), Signal 1 and Signal 2 at some scan rate. I used 100,000 S/s for 10,000 samples. Then I split the array into two separate waveforms. Then I did an edge detect on each one and it returns the position in the array where the falling edge occurs. The difference is the delay (after correcting for the scan rate), unless Sig2 comes first in which case the delay is the period - (or +) the difference
To find the period I used a subset of the Signal 1 waveform from the first falling edge on to the end of the waveform, then did the same edge detect except set the reset setting to true instead of false so it wouldn't detect the low signal which was now at the position 0 in the waveform. So it would ignore the initial low value, wait for it to go high, then detect the falling edge position.
Anyway, it works awesome, seems very accurate and gives very stable readings. 3600rpm no problem. It detects changes of one or two degrees in angular position, with a range from ~145 degrees to ~280 degrees -
I bought “Captivate” few days ago. I received the internet address to download the program and the activation number. I downloaded the program (OK), started the installation program (OK) and received indications that the decompression process was OK. Then the installation started and I was asked to introduce the activation number (OK). After this, a bar showing the progress of the installation was shown on the screen. The bar stopped at 2%. I waited more than 20 min and saw no progress. Then I decided to start the “windows task manager” to see if the process was active. I have windows 7, so I pressed alt-ctrl-del and received the message (2-5 min later) that the task manager could not start. I waited more time (more than 1 hour) and since the installation progress was still indicating 2% and since I still could not activate the task manager, I rebooted the computer.
I then tried to reinstall the program. After the decompression, I receive the message:”Installer failed to initialize. Please download Adobe support advisor to detect the problem”. I followed the link to discover that the program is no more available.
What should I do?Hello,
Please follow the steps down below .
Disable the start up items. ( Ms config )
Rename the OOBE folder from the location mentioned below .
Windows: C>Program files or Program files(x86)>Common files>Adobe>OOBE and rename the OOBE folder to like (OOBE_old).
Uninstall the Adobe Captivate 8 components manually from the machine. Delete all the Adobe Captivate files and folders manually.You may check the following locations.
o C:\Program Files\Adobe*
o C:\Program Files\Common Files\Adobe*
o C:\Program Files\Common Files\Macrovision Shared
o C:\Program Files (x86)\Adobe*
o C:\Program Files (x86)\Common Files\Adobe*
o C:\Program Files (x86)\Common Files\Macrovision Shared
o C:\ProgramData\Adobe*
o C:\ProgramData\FLEXnet
o C:\Users\<user_name>\AppData\Roaming\Adobe*
o C:\Users\<user_name>\AppData\Roaming\com.adobe.*
o C:\Users\<user_name>\AppData\Local\Adobe*
o C:\Users\<user_name>\AppData\LocalLow\Adobe*
o C:\Users\<user_name>\AppData\Local\VirtualStore\Program Files\Common Files\Adobe*
Create a new user account which has the admin rights on it.
Restart the machine.
Login to a new user account .
Once you are logged in then try to install it again.
Regards,
Rajeev . -
NEED HELP FAST! iv turned my iphone on and the apple sign has come up but thats all thats happening?
how can i turn my iphone on, iv pressed the button on the top of the phone but nothing happens all that has come up is the apple sign, i really need my phone on, as i cant take the sim card out and put in another phone because its too small!
Hold the HOME and SLEEP buttons until an Apple logo appears (10-15 seconds). If that doesn't fix it you will have to connect it to iTunes to restore it. If you have a problem with restoring, see:
iPhone and iPod touch: Unable to update or restore -
Hi upgraded my iphone 5 to ios7.1 and now my Facebook and fitbit app won't work it just keeps going back to front screen and suggestions on how I can fix this if so please put answer in simple words. Thanks
Hello Glenys,
It sounds like you have 2 apps that are not working as expected. I recommend the steps from the following article named:
iOS: An app you installed unexpectedly quits, stops responding, or won’t open
http://support.apple.com/kb/ts1702
These steps will get you started but therea are more if needed:
Restart the app
Close the app and open it again.
Restart your device
Turn the device off and on.
Update your device software and your apps
Update your device to the latest version of iOS.
Update your apps:
Open the App Store and tap Updates.
If updates are available, tap Update All.
If asked, enter your Apple ID password. The updates will download and install.
You might need a Wi-Fi connection to update some apps.
Install another app from the App Store
If your installed app won't open, download and install a free app that isn't on your iOS device. This should reset your Apple ID authorization.
Remember to use the same Apple ID that you used to download the app that you're having issues with.
Thank you for using Apple Support Communities.
Take care,
Sterling -
Hi I need Help for Formating HD so Wat Key need hold on start up for format HD I apprciated you Help
Jesus:
Formatting, Partitioning Erasing a Hard Disk Drive
Warning! This procedure will destroy all data on your Hard Disk Drive. Be sure you have an up-to-date, tested backup of at least your Users folder and any third party applications you do not want to re-install before attempting this procedure.
• With computer shut down insert install disk in optical drive.
• Hit Power button and immediately after chime hold down the "C" key.
• Select language
• Go to the Utilities menu (Tiger) Installer menu (Panther & earlier) and launch Disk Utility.
• Select your HDD (manufacturer ID) in left side bar.
• Select Partition tab in main panel. (You are about to create a single partition volume.)
• _Where available_ +Click on Options button+
+• Select Apple Partition Map (PPC Macs) or GUID Partition Table (Intel Macs)+
+• Click OK+
• Select number of partitions in pull-down menu above Volume diagram.
(Note 1: One partition is normally preferable for an internal HDD.)
• Type in name in Name field (usually Macintosh HD)
• Select Volume Format as Mac OS Extended (Journaled)
• Click Partition button at bottom of panel.
• Select Erase tab
• Select the sub-volume (indented) under Manufacturer ID (usually Macintosh HD).
• Check to be sure your Volume Name and Volume Format are correct.
• Click Erase button
• Quit Disk Utility.
cornelius -
Need help for finding oracle payables tables
Hi,
I need help for finding tables relating fields INVOICE_ID, NOTIFICATION_ID and APPROVAL_STATUS or WFAPPROVAL_STATUS. I have searched a lot but has been unable to find any table containing all the above mentioned fields. I found the table WF_NOTIFICATIONS for INVOICE_ID, however have been unable to find the latest tables with INVOICE_ID and APPROVAL_STATUS as fields.
All the tables having this combination are either very old tables which are not used anymore or doesnt give the required data. Please let me know where am i going wrong. Once i get the required tables, i need to join the tables to get the required data with the imp fields. Also, the values of WFAPPROVAL_STATUS are not very clear to me. I need values for it as APPROVED, REJECTED AND INITIATED.Hi Swetha,
You will have to manually make the table adjustments in all the systems using SE14 trans since the changes done using SE14 cannot be collected in any TR.
How to adjust tables :
Enter the table name in SE14. For ex for any Z master data(Say ZABCD), master data table name would be /BIC/PZABCD, text table would be /BIC/TZABCD. Similarly any DSO(say ZXYZ) table name would be /BIC/AZXYZ00 etc.
Just enter the table name in SE14 trans --> Edit --> Select the radio button "Save Data" --> Click on Activate & adjust database table.
NOTE : Be very careful in using SE14 trans since there is possibility that the backend table could be deleted.
How to collect the changes in TR:
You can collect only the changes made to the IO --> When you activate, it will ask you for the TR --> Enter the correct package name & create a new TR. If it doesn't prompt you for TR, just goto Extras --> Write transport request from the IO properties Menu screen. Once these IO changes are moved successfully, then the above proceduce can be followed using SE14 trans.
Hope it helps!
Regards,
Pavan -
Problem with Energy Management and One key Theater
I have a Lenovo G560 laptop. Actually, I have first installed Windows 7 x64 on my lappy but it caused many problems so I again reinstall windows 7 32 bit. But now Energy Management and One key theater are not working at all.
Is there any fix for it???As I understand you are unable to use OneKey Theater and Lenovo energy management.
The installation of both OneKey Theater and Power Management are necessary for using OneKey Theater. Through "Start" à "All Programs" à "Lenovo", or "Start" à "Control Panel" à "Programs" à "Programs and Features", you can find out whether OneKey Theater has been installed.
If it has been installed, you need to make sure the following two items has been started in “Start à Run à msconfig à Startup”
After that, if OneKey Theater is still unable to be started, you can run it manually by double clicking "Onekey Studio" through "Local Disk(C" à "Program Files" à "Lenovo" à "OneKey Theater".
If OneKey Theater has been started, you can see "Onekey Studio.exe" under the "Processes" tab of "Windows Task Manager".
OneKey Theater can be download from the mentioned below web link.
http://consumersupport.lenovo.com/in/en/driversdownloads/Drivers_Show_2651.html
Lenovo energy management software can be download from the mentioned below web link.
http://consumersupport.lenovo.com/in/en/driversdownloads/Drivers_Show_2604.html
Best Regards,
Tanuj
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
I'm about to hulk out guys! Brand new iPhone 5 and need to update iTunes for recognition. Keep getting "the installer encountered an error that caused the installation to fail." Can anyone help? I may smash something very soon.
iTunes:
AppName: itunes.exe
AppVer: 10.5.0.142
ModName: unknown
ModVer: 0.0.0.0
Offset: 001be6f6
Quicktime:
EventType : BEX
P1 : QuickTimePlayer.exe
P2 : 7.71.80.42
P3 : 4ea5c6ef
P4 : QuickTimePlayer.dll
P5 : 7.71.80.42
P6 : 4ea5c6d5
P7 : 00005b6d
P8 : c0000409
P9 : 00000000
That's consistent with another application (other than QuickTime) having dropped old QuickTime componentry in non-standard locations on the PC.
So we'll go looking for the older QuickTime componentry in the most common locations for it to be stashed.
First we'll need to change some view options on the PC.
1. Open My Computer from the desktop or Start menu.
2. In the Tools menu, click Folder Options.
3. Click the View tab.
4. In the "Advanced settings" pane under "Hidden files and folders" make sure that the "Show hidden files and folders" option is selected, and the "Hide extensions for known file types" option is unchecked.
5. Click OK.
Now in My Computer, open your C drive.
Open the "Windows" folder.
Open the "system32" folder.
What files and/or folders can you see in there with QuickTime in the file/folder name? (In a standard installation of QuickTime, you should see precisely two files ... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.) -
hi everyone. i need help for resettting my airport express as a repeater. i bought is airport express 2nd hand. so now this one already registered to old wireless.
could anyone have any advice. thank you.
now the airport express is blinking yellow color.
my main base is using time capsule. this is a new one so when i first turn it on and set it up in airport utility its very easy.
now setting the repeater (airport express) is ............ ???
thanks everyone.Do a factory reset, then it'd be like it's new from the Apple Store.
http://support.apple.com/kb/ht3728 -
I need to by apps but it keeps asking for my security questions ;/ but forgot the answers to my security questions and the security/rescue email too (i dont have USA number to call please help me and send my rest to my email
You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
(115668) -
I have problem with buying in games , I got the massage that the purchased can not be completed , please contact iTunes support.. I need help for my case please
http://www.apple.com/support/itunes/contact/
Maybe you are looking for
-
Printing Employee Pay Slip using HRFORMS
Hello Experts, I am working on a smartform for printing employee pay slips/remuneration statments using HRFORMS config. I am trying to print the payslip checks using this and in the smartform, I have a problem with printing the check footer data usin
-
Select-option w/out reference table-field
Hi, I have a select-option in the selection-screen where the values will be stored as fixed values under "Value range" of the domain. My problem here is that the reference table was not given. If i will use the select-option syntax, it will give an e
-
Hello, never used this before but need your help please. When I click devices it does not open. I am using toshiba lap top, vista. Thank you.
-
Create material using reference material
Hi All, I need to create a material using a reference material. I am using the BAPI_MATERIAL_SAVEREPLICA and passing the reference material in the PL_REF_MAT field. But this is not working fine. I have searcged the forums as well but couldn't find an
-
How do i get out of group message
how do I remove myself from group message