Need help for writing an own pulse script

Hello,
i want to generate a simple current pulse with my keithley 2602A, but i have a problem with the pulsewidth.
I observed the length of the pulse on an oscilloscope and it's nearly constant for about four times and then, the next time it takes about 40 seconds longer.
I wrote the following script:
smua.measure.rangev = 6.000000
smua.measure.rangei = 1.000000
smua.source.rangev = 6.000000
smua.source.rangei = 1.000000
smua.sense = 1.000000
ntimes = 100000.000000
smua.source.func = smua.OUTPUT_DCAMPS
smua.source.leveli = 0.186000
smua.source.limiti = 0.200000
smua.source.limitv = 5.000000
mybuf = smua.makebuffer(2)
mybuf.clear()
mybuf.appendmode = 1
smua.measure.count = 1
smua.source.output = 1
for i = 1 , ntimes do -- Perform following command(s) ntimes
end --for
smua.measure.i(mybuf)
smua.measure.v(mybuf)
smua.source.output = 0
I figured out, that the problem is in smua.measure.X and not in the loop.
Could you please help me?

Definitely the wrong forum.
The forum you arre looking for can be found here:
http://forum.keithley.com

Similar Messages

Need help for writing extract program

hi
i need help for writing extract program to retriew data from legacy system.
i already developed bdc programs for me31k and me21.
my requirement is to write extract program s for those t.codes.
to retriew data from legacy system and stored in flat file.

i need help with a java program. it is a program that allows the user to enter a student's GPA, number of extracurricular activities, and number of service activities. The user can not enter a gpa above 4.0 or below 0. The user can not enter a negative number for the number of both activities. If the student meets the following criteria: 1) GPA of 3.8 or above and at least one extracurricular activity and one service activity, 2) GPA below 3.8 but at least 3.4 and a total of at least three extracurricular and service activities, 3) GPA below 3.4 but at least 3.0 and at least two extracurricular activities and three service activities, the message "Scholarship candidate" should display. If the student does not meet the criteria above, then the message"not a candidate" should display. Can you help me, please?
You haven't posted ANY 'java program' for us to help with.
The forum is NOT a coding service. It is to help you with YOUR code.
Post the code you have written and SHOW us (don't just tell us) how you compile it and execute it and the results you get. Then we can help you with any problems you are are having.
If you need help understanding just what the program should be doing you need to ask your instructor to clarify the assignment.

Need help for writing script for Cisco GSS

/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
We would like to know if running script from DB server it can activate and suspend of answer group instances

Definitely the wrong forum.
The forum you arre looking for can be found here:
http://forum.keithley.com

Need help for generating textboxes in java script

hii,
yes,we are discussing about text boxes that are dynamically generated.the cursor should go from one textbox to another by pressing enter key.(suppose we are having three rows and three columns,
and each column textboxes are having the same name,then the cursor should move from one textbox of first column first row to second row first column textbox ..& like that.That means the cursor should move downwards.
if any one knows the code,please help me.

hiii,
To move cursor from one textbox to another text box ,I have take the length of the textboxes of the first column.I used onkeyDown event .
in the function ,firest i checked the condition like
for(i=0;i<form1.box.length;i++) //box is the name of the textboxes
if(event.keyCode==13)
form1.box[i+1].focus();
return false;
by using this the cursor is moving from first text box to secon textbox and stops.
if i use event.returnValue=false; instead of return false ,then the cursor automatically going to the laxt textbox of the column.
my problem is how i can focus the cursor from one textbox to another textbox one after the other till the end.
if any one has solution please help me.
thanx.

I need help for actionscript 3, sending php info to my email, website created in Flash cs5 pro

Hi, My name is David and I followed a course creating my own website from Lynda.com by Paul Trani. After that I created my first own webste. After I finished it, everything was working well in flash and firefox. I have only one problem and question concerning the feed back form for sending info from my website to my emailaddres. I created my website “LisbonDreamWalking”in Flash CS5 pro. I herein have a contact page, where people can send an email for a walk in Lisbon, date,the number of people etc. Now I want through my ISP / host funpic.org, that the input, info text fields to be sended to my emailaddress [email protected]. My mail URL adress iss: http://lisbondreamwalk.li.funpic.org This is a free host, so they don't work with forms like in the course, and I need some additional info for the php. Here is my HTML (Flash actionscript 3.0) for the sending I only have the red text to fill in (php), I was told by the adobe course.I really hope someone can help me?! Thanks in advance!
Instructions: 1. Add your custom code on a new line after the line that says "// Start your custom code" below. The code will execute when the symbol instance is clicked. */ send_btn.addEventListener(MouseEvent.CLICK, fl_MouseClickHandler_13); function fl_MouseClickHandler_13(event:MouseEvent):void {          if (thename.text == "" || theemail.text == "" || thetime.text == "" || thepersons.text == "" || themessage.text == "")      {           thankyou.text = "please fill out all fields";      }      else      {           // create a variable container           var allVars : URLVariables = new URLVariables();           allVars.name = thename.text;           allVars.email = theemail.text;           allVars.time = thetime.text;           allVars.persons = thepersons.text;           allVars.message = themessage.text;           //Send info to a URL           var mailAddress:URLRequest = new URLRequest("http.www.namewebsite.com/gdform.php");           mailAddress.data = allVars;           mailAddress.method = URLRequestMethod.POST;           sendToURL(mailAddress);           thankyou.text = "Thank YOU!";           thename.text = "";           theemail.text = "";           thetime.text = "";           thepersons.text = "";           themessage.text = "";      } }
H

Thank you Kglad, I am going to see if I can make it work. I will let you know!
Date: Thu, 13 Oct 2011 08:55:05 -0600
From: [email protected]
To: [email protected]
Subject: I need help for actionscript 3, sending php info to my email, website created in Flash cs5 pro
    Re: I need help for actionscript 3, sending php info to my email, website created in Flash cs5 pro
    created by kglad in Action Script 3 - View the full discussion
you missed part of the tutorial (or the tutorial is incomplete): send_btn.addEventListener(MouseEvent.CLICK, fl_MouseClickHandler_13); function fl_MouseClickHandler_13(event:MouseEvent):void{     if (thename.text == "" || theemail.text == "" || thetime.text == "" || thepersons.text == "" || themessage.text == "") { thankyou.text = "please fill out all fields"; } else { // create a variable container var allVars : URLVariables = new URLVariables(); allVars.name = thename.text; allVars.email = theemail.text; allVars.time = thetime.text; allVars.persons = thepersons.text; allVars.message = themessage.text; //Send info to a URLvar mailAddress:URLRequest = new URLRequest("http.www.namewebsite.com/gdform.php"); mailAddress.data = allVars; mailAddress.method = URLRequestMethod.POST; sendToURL(mailAddress);
}} var urlLoader:URLLoader=new URLLoader(); function sendToURL(mailAddress):void{urlLoader.addEventListener(Event.COMPLETE,completeF);urlLoade r.load(mailAddress);} function completeF(e:Event):void{ thankyou.text = "Thank YOU!"; thename.text = ""; theemail.text = ""; thetime.text = ""; thepersons.text = ""; themessage.text = "";}
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3969414#3969414
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3969414#3969414. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Action Script 3 by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Need help in writing data from JSP to excel

Hi ,
I need help in writing the data from JSP to excel.I somehow able to retrieve the data into excel but unable to get the required format.
For eg: The amount should be displayed in 0.00 format .when i am exporting it to excel it is displaying as 0 :( .
I am using the following code in JSP.
"out.print(amt + '\t');"
Would like to know if there is any otherway where in i can get my requirement.
Thanks
Tom

Hi,
Try using format part of the JSTL tag libs.
Syntax :
<%@ taglib prefix="fmt" uri="http://java.sun.com/jsp/jstl/fmt" %>
<fmt:formatNumber value="40" pattern="$#,##0.00"/>
I need help in writing the data from JSP to excel.I
somehow able to retrieve the data into excelHow do u convert the jsp to excel?
One way to convert the jsp page to excel, is to render it as an excel appl instead of html. Set the content type of the response to application/ms-excel.
response.setContentType("application/ms-excel")Hope this Helps....

Need help for string tokenizer!

I need help in writing out the string tokenizer.. i've got all of the functions written except for the nexttokken function which i am stuck in. Can anyone help me out in writing the function?

An example of splitting string by comma
String str"A,B,C";
StringTokenizer st = new StringTokenizer(str,",");
while (st.hasMoreTokens()) {
System.out.println(st.nextToken());
This is just an example of usage; i would prefer to use split() function instead

Need help for flash builder

i need help for flash builder 4 and papervison 3d. I need to create a slider with it ranges of value from 10 to 50 to adjust the camera values for the camera.fov and also need to create it for the yaw of the object from 0 to 360. I try to look for any slider event and classes in this program but cant find any, btw, i need to use the AS only project file.
here is my codes:
can you please tell me how i should modify the codes?
package
    import flash.display.BitmapData;
    import flash.display.Sprite;
    import flash.events.Event;
    import org.papervision3d.materials.BitmapFileMaterial;
    import org.papervision3d.materials.BitmapMaterial;
    import org.papervision3d.objects.primitives.Sphere;
    import org.papervision3d.view.BasicView;
    [SWF (width="800", height="600", backgroundColor="0x000000",frameRate="30")]
    public class EarthBitmap extends BasicView
        private var sphere:Sphere;
        public function EarthBitmap()
            super(800 , 600);
            var earthmaterial:BitmapFileMaterial = new BitmapFileMaterial("../assets/Earth.jpg");
            sphere = new Sphere(earthmaterial,100,20,18);
            camera.fov = 25;
            scene.addChild(sphere);
            addEventListener(Event.ENTER_FRAME,rotateSphere);
        public function rotateSphere(evt:Event):void
            sphere.yaw(0.2);
            singleRender();

Turn the click handler into a full on separate function. Then store all the views in an array and use Math.rand() to randomly choose one.
Something like this:
<fx:Script>
     <![CDATA[
          var questionsArray:Array = {question2,question3,question5,questionRed,questionGeography};
          function buttonClickHandler(event:MouseEvent){
               var randomProblem:int = Math.floor(Math.random()*(questionsArray.length));     //generates a random integer between 0 and the total number of questions in the array (arrays are 0-based)
               navigator.pushView(questionsArray[randomProblem]);
     ]]>
</fx:Script>
<s:Button id="randomProblemButton" label="Next Problem" click="buttonClickHandler(event)" />
Haven't tested that, but something along that line should work

Need help for my ipod 5th gen

need help for my ipod 5th gen it was i cloud issue my cousin forgot her apple id and password ihave prof that we own these ipad because we have the receipt and its full package any one know how to reset the ipod so we can use it again??warranty is expired

Recover the ID and then the password by:
Is there a way to find my Apple ID Name if I can't remember it?
Yes. Visit My Apple ID and click Find your Apple ID. See Finding your Apple ID if you'd like more information.
How do I change or recover a forgotten Apple ID Password?
If you've forgotten your Apple ID Password or want to change it, go to My Apple ID and follow the instructions. See Changing your Apple ID password if you'd like more information.
Last, contact iTunes by:
Apple - Support - iTunes - Contact Us
or make an appointment at the Genius Bar of an Apple store. Bring your proof of purchase
Apple Retail Store - Genius Bar

I have problem with buying in games , I got the massage that the purchased can not be completed , please contact iTunes support.. I need help for my case please

I have problem with buying in games , I got the massage that the purchased can not be completed , please contact iTunes support.. I need help for my case please

http://www.apple.com/support/itunes/contact/

Need help for Format HD

Hi I need Help for Formating HD so Wat Key need hold on start up for format HD I apprciated you Help

Jesus:
Formatting, Partitioning Erasing a Hard Disk Drive
Warning! This procedure will destroy all data on your Hard Disk Drive. Be sure you have an up-to-date, tested backup of at least your Users folder and any third party applications you do not want to re-install before attempting this procedure.
• With computer shut down insert install disk in optical drive.
• Hit Power button and immediately after chime hold down the "C" key.
• Select language
• Go to the Utilities menu (Tiger) Installer menu (Panther & earlier) and launch Disk Utility.
• Select your HDD (manufacturer ID) in left side bar.
• Select Partition tab in main panel. (You are about to create a single partition volume.)
• _Where available_ +Click on Options button+
+• Select Apple Partition Map (PPC Macs) or GUID Partition Table (Intel Macs)+
+• Click OK+
• Select number of partitions in pull-down menu above Volume diagram.
(Note 1: One partition is normally preferable for an internal HDD.)
• Type in name in Name field (usually Macintosh HD)
• Select Volume Format as Mac OS Extended (Journaled)
• Click Partition button at bottom of panel.
• Select Erase tab
• Select the sub-volume (indented) under Manufacturer ID (usually Macintosh HD).
• Check to be sure your Volume Name and Volume Format are correct.
• Click Erase button
• Quit Disk Utility.
cornelius

Need help for my requirement...

Need help for my requirement...
Hello Experts,
I have report where users can input the company, housebank, account ID and posting date.
Now in one column of my report named 'Cash in Bank', I need to get all postings from cash
accounts with GL code ending in '0'. Now, I know that I can get the amounts in BSIS/BSAS
but how do I link it with the proper bank and account?
For example:
                   Cash in Bank
Bank A
Account ID 1     1,000,000
Account ID 2     25,000,000
Hope you can help me guys. Thank you and take care!

hi Viraylab,
each house bank you can find in table T012, in T012K you'll find the bank accounts to the housebank, the G/L account will be in T012K-HKONT.
hope this helps
ec

Need help for importing oracle 10G dump into 9i database

hi, Someone help me to import oracle 10G dump into 9i database. I'm studying oracle . Im using oracle 10G developer suite(downloaded from oracle) and oracle 9i database. I saw some threads tat we can't import the higher version dumps into lower version database. But i'm badly need help for importing the dump...
or
someone please tell me the site to download oracle 9i Developer suite as i can't find it in oracle site...

I didnt testet it to import a dump out of a 10g instance into a 9i instance if this export has been done using a 10g environment.
But it is possible to perform an export with a 9i environment against a 10g instance.
I am just testing this with a 9.2.0.8 environment against a 10.2.0.4.0 instance and is working so far.
The system raises an EXP-00008 / ORA-37002 error after exporting the data segments (exporting post-schema procedural objects and actions).
I am not sure if it is possible to perform an import to a 9i instance with this dump but maybe worth to give it a try.
It should potentially be possible to export at least 9i compatible objects/segments with this approach.
However, I have my doubts if this stunt is supported by oracle ...
Message was edited by:
user434854

Need Help for Nokia 6500 slide

Hi all I'm A new Guy here ,
But I do really need help for hard reset my phone
I already try *#7073# But It doesn't work ,
If Anybody know to make a hard reset please help

rwss wrote:
I'v got te same problem with my 6500 Slide, is there a button combination that we have to press
to hard reset the 6500 Slide?!
How does the 6500 slide hard reset?
That's simple.
All you have to do is:
From MENU goto SETTINGS, When there scroll down and select 'Restore Factory Setting'.
There are two options in there:
"Restore Settings only"
and
"Restore all"
Select "Restore All"
When done the phone will delete every thing on the Phone memory(C:\)(contacts,picture,messages etc)
and also restore phone to its original settings and will restart.
This proceedure is mostly common on S40 phone.
Hope this explain and solve the problem.

Need help for publishing web intelligence document (universe) into InfoView

Post Author: mirage
CA Forum: Publishing
Hello all,
I need help for publishing web intelligence document (universe) into InfoView.
can't find this information in Business Objects Designer's Guide and in Business Objects Administrator Guide.
Can somebody give short instructions how can I do it?
Regards, Slava

If the change between the 2 types of data has to happen dynamically during run time them
1. Use 2 dataproviders
a. Current
b. Historic
2. Merge the 2 dimensions
3. Use Webi variable to switch between the measure of the current and historic universe
Ex if [year] < 2010 then historic.[expense] else current.[expense]
Hope this helps,
Divya

Need help for writing an own pulse script

Similar Messages

Maybe you are looking for