Need Help - Format Text
Hi
I am writing a servlet that reads a text file (*.txt) and then outputs it in HTML, as you do with servlets.
Sounds simple enough, but there is a few problems I have and am hoping for some guidance.
It is basically a log of jobsets that fell over the night before and need to be posted on the web.
- Java 1.3.1 is a requirement (that means .split() cannot be used!)
- The .txt file may vary in length from 10 to 30 lines.
- The lines are numbered.
- The data on each line varies and may differ from log to log (ie: Line 1 may not always be for Jobset 1)
- The "BLAH" and "FOO" columns needs to be in bold
- The return statements ("Completed Successfully" or "Error....etc") need to be on a new line directly below the Jobset.
I honestly cannot think of how to do this, due to the flexible nature of the .txt file, and especially without .split().
I have played with a BufferedReader and StringTokenizer, but it is just driving me crazy.
Sample of Txt below.
Jobsets for FOOSERVER, Run time: 2005-11-09-11.10.01.550000 Qual: 1234
1 BLAH1 - Foo Extracts Completed Successfully
2 BLAH2 - Foo55 Data Extract Completed Successfully
3 BLAH7 - Foo HR System Jobs Completed Successfully
4 BLAH9 - Foo blah to MVS Error on Line 47 "Data not found" and other problems
5 BLAH44 - Foo Extract Interface Completed Successfully Thanks in advance.
- Java 1.3.1 is a requirement (that means .split()
cannot be used!)I think I am nitpicking but 1.3.1 would be a constraint rather than an requirement. But you could still make use of a method similar to split with some third part regex packages.
http://www.regex.info/java.html
Similar Messages
-
Need help formatting text field default value
Hello,
I've received a customer request to put default text into the Value section of a text field. They're requesting that the default text include line breaks, bullets, etc. I added a Text Field object and added the default text to the Object tab > Value tab Default field but can't figure out how to add line breaks, etc.
Thanks in advance,
SaskiaHi,
this is possible but not doable with the UI of Designer.
The workaround is as follows:
1. Create a text, enter your default text with all the formattings you need (text color, bold text, line breaks etc.)
2. Create a text field and enter any word as default value. Let's say "Default".
3. Select the text and the switch to the XML Source view.
There you will find all the formatted text between the <value> tags such as:
<value>
<exData contentType="text/html">
<body xmlns="http://www.w3.org/1999/xhtml" xmlns:xfa="http://www.xfa.org/schema/xfa-data/1.0/"><p style="letter-spacing:0in">This is<span style="xfa-spacerun:yes"> </span></p><p style="color:#ff0000;letter-spacing:0in">default Text</p><p style="letter-spacing:0in"><span style="xfa-spacerun:yes"> </span>• with<span style="xfa-spacerun:yes"> </span><span style="font-weight:bold">RichText</span> formatting.</p></body>
</exData>
</value>
4. Select the whole code between the <value> tags and copy it to the clipboard (ctrl + c).
5. Go to the Design View, select the text field, go back to the XML Source view.
6. There you'll also find the value <tags> and your default value you entered before.
<value>
<text>Default</text>
</value>
7. Select this code section and paste the value copied before to the clipboard by pressing ctrl + v.
8. That's it. When you now go back to the Design View your text field shows a formatted RichText as defaul text. -
Need Help formatting text in a chart in Keynote
I'm attempting to edit/format some of the text in a chart. This is an imported Powerpoint presentation
so I'm limited to using the fonts available on the originators PC.
On the chart is a legend, showing little coloured boxes which reference the coloured elements in the chart. The text beside these is too long, and the text box runs off the page. I know I can go to the inspector and change some parameters (ie horizontal spacing) but I really need to break the text into two (or more) lines. However, I cannot find a means to enable text wrap. I have tried to create an invisible additional column (Chart/edit data) but I cannot hide the box.
Any suggestions would be appreciatedYou can add a line break in the Chart Data Editor cells by typing Option-Return at the point you want the break. This will let you have legends with text that runs two or more lines.
-
Hello,
My program send a table to a method that save table values in disk ".doc", there is a way to format some strings to be bold in the
end file??
Here is the Code:
import java.io.*;
import javax.swing.*;
public class test{
public test( JTable table ){
String out = "";
for ( int i = 0 ; i < table.getRowCount(); i++ )
for( int j = 0 ; j < 5 ; j ++ ){
out += table.getValueAt( i , j );
if( j == 0 )
out += " - ";
else
out += " ";
if( ( j + 1 ) % 5 == 0 )
out += "\n";
FileOutputStream fOut = null;
try{
JFileChooser fc = new JFileChooser( );
fc.setFileSelectionMode( JFileChooser.FILES_ONLY );
fc.showSaveDialog( null );
File file = fc.getSelectedFile();
fOut = new FileOutputStream( file.getPath( ), true);
fOut.write( ( out ).getBytes( ) );
fOut.flush( );
fOut.close( );
catch (Exception e){
e.printStackTrace();
}No. Or more specifically, if you are writing a text file (such as ASCII), then you cannot.
-
Need Help regarding text Output
Dear gurus.
I need help regarding formatting of a text.
I want to format a employee sub group text.
im getting a text workers (7) from a table t503t having field ptext.
i want to show only (7) in the output not the whole text how can i do this ?
Please help
regards
Saad.NisarDATA: BEGIN OF itab_odoe OCCURS 0,
department_text LIKE t527x-orgtx,"Holds the short text for department
department_no LIKE pernr-orgeh,
pernr LIKE pernr-pernr,
ename LIKE pernr-ename,
grade like t503t-ptext, "THIS AREA GET ME TEXT OF EMPLOYEE SUBGROUP"
* department_text LIKE t527x-orgtx,"Holds the short text for department
current_year LIKE sy-datum,
wt0001 LIKE q0008-betrg,"Basic Pay
wt1101 LIKE q0008-betrg," COLA
wt3002 LIKE p0015-betrg,"Overtime
per_basic type p DECIMALS 2,"Overtime percentage on basic
per_basic_sum type p decimals 2,"Overtime Sum Division
overtime_sum LIKE p0015-betrg,"holds sum of overtime
basic_sum like q0008-betrg,"holds sum of basic
END OF itab_odoe.
Im using the select statement to get the employee subgroup from the table
select single ptext
from t503t
into itab_odoe-grade
where persk eq pernr-persk
AND SPRSL eq 'EN'.
now in itab_odoe-grade the values comes is Workers (7) , Snr Mgt (M3)
i want to show only the text in Brackets. -
HELP! Need help generating TEXT-ONLY portal page...
Text Only Portal Question:
PLATFORM:
=================================================================
Sun Solaris (5.2 if memory serves) for db and mid-tier, running
8.1.7 DB and 3.0.9 (1.0.2.2) portal.
THE NEED:
=================================================================
I need to display text only portal pages. Some of the more
detailed concerns at this point are below. Also, I've had an open
tar on Metalink for about two weeks, and after research from
their end has resulted in no help.
THE ISSUES (so far):
=================================================================
IMAGES:
If an anchor [A HREF=...] tag uses an image as it's "text", I
need to strip out the ALT= text to show inside the anchor. If no
ALT text is available, then I would like to show the image name
as a default.
For example:
<img src=home.gif
alt=Home>
should display as:
Home
FORMS:
How do I get the resulting page from a form (which include the
login inputs and submit button, search box, advanced search page,
etc.) to be displayed by the text only page?
For example:
When a form is called, the <FORM> elements are as follows:
METHOD=GET or POST
ACTION=url (relative or absolute) to the script.
In this case, the action value is:
ACTION=/servlet/page?
pageid=6&dad=portal30&_schema=PORTAL30.
This calls the advanced search API.
I would expect that to redirect the browser back to some
text-only version, the ACTION= element would have to be changed
to be something like:
ACTION=[pathscraper]?/servlet/page?
pageid=6&dad=portal30&_schema=PORTAL30
REDIRECTION:
What happens when portal pages redirect internally? How do you
get back to the text-only page?
For example:
The login link on the standard Oracle Portal home page flips
from url to url to get to the actual login page. Our
implementation of Oracle portal goes from
[DOMAIN]/pls/portal30_sso/portal30_sso.wwsso_app_admin.ls_login
to [domain]/pls/portal30_sso/portal30_sso.login_page.
Since this is standard Oracle redirection, how can it be
intercepted so the portal30_sso.login_page can be presented as
text only?
TRIED SO FAR:
=================================================================
I've written a socket/text scraper in Perl, running it from a web
server. The problems mentioned above are really causing problems,
plus the whole cookie thing. Since Oracle Portal tries to push a
cookie to the client, when the client is another UNIX server,
the cookie thing doesn't work.
POSSIBLE OTHER SOLUTIONS:
=================================================================
Something...anything. I've tried to think of some method to
create some sort of PL/SQL procedure to catch the content then
strip out the HTML calls.
An Applet to do the same thing, but on the client side, but
since time is an issue, coding a complete Java applet isn't
really an option.
THE CONCLUSION:
=================================================================
HELP! I need some help. This is for a client that is government
funded, and to meet Section 508 (part of the Americans with
Disabilities Act that states web sites and applications must be
made accessible. A text-only page is one of the requirements for
an accessible page.
Thanks,
Ryan Stefani
ps: feel free to contact me via [email protected] or
[email protected]Use Find/Change and the GREP tab.
Search for .+ and set the Find formatting to find the charcteristics you want.
What will you do with this text once found? You'll need something to "change" to, either new text or Change Formatting options... -
Need help in text field with 2D array
text field with 2D array
Hi
I need help to represent (i) in from field and (j) in to field
I and j are 2D an array indices.
This code are not complated
import java.applet.*;
import java.awt.*;
import java.awt.event.*;
//declaring class
public class test3 extends Applet implements ActionListener
{ //declaring the TextField
private TextField fromField ,toField;
//declaring an array
int weight[][];
int m = 99; // m is infinity
int N; // Set of Nodes
int d; // distance
int i; // source Node
int j; // destition Node
//declaring values of text field
private int from = i; // start Node
private int to = j; // end node
public void init()
setBackground(Color.white);
setForeground(Color.red);
//giving labels
Label TITLE2,TITLE1;
TITLE1 = new Label("from:");
add(TITLE1);
fromField = new TextField(5);
add(fromField);
// register listener using void add actionListener
fromField.addActionListener(this);
TITLE2 = new Label("to");
add(TITLE2);
toField = new TextField(5);
add(toField);
// register listener using void add actionListener
toField.addActionListener(this);
// event handler methods
public void actionPerformed(ActionEvent event) {
//declaring textfield
from=Integer.parseInt(fromField.getText());
to=Integer.parseInt(toField.getText());
weight =new int[7][7];
weight[1][1] = 0; weight[2][1]= 2;
weight[1][2]= 2; weight[2][2]= 0;
weight[1][3]= 5; weight[2][3]= 3;
weight[1][4]= 1; weight[2][4]= 2;
weight[1][5]= 99; weight[2][5]= 99;
weight[1][6]= 99; weight[2][6]= 99;
weight[3][1]= 5;
weight[3][2]= 3;
weight[3][3]= 0;
weight[3][4]= 3;
weight[3][5]= 1;
weight[3][6]= 5;
for (int i=1; i<7; ++i) {
for (int j=1; j<7; ++j)all your base are belong to us
-
Need help with text() processing in XSL
Hello,
I have an xml that contains such text in my xml:
before<a>inside</a>after
and an xsl that transforms it to HTML (a cut for xsl):
<xsl:template match="a">
<xsl:apply-templates/>
</xsl:template>
<xsl:template match="text()">
<xsl:value-of disable-output-escaping="yes" select="."/>
</xsl:template>
The result is: inside before after
but I need: before inside after
It seems it happens 'cause of this: http://www.w3.org/TR/xslt#conflict
but I cannot find a way to solve this problem :(
I had tried to use priority in xsl:template, but it didn't help :(
Thanks a lot.DrClap
here are xml and xsl.
That's not a real xml and xsl, but they might describe the idea and problem. I hope I miss nothing.
P.S. I cannot control xml, that's why I cannot use: <xsl:text> in xml.
Thank you!
xml:
<?xml version="1.0" encoding="UTF-8"?>
<root>
<title>Page title</title>
<page>
Location: <red>http://host</red>
</page>
</root>
xsl:
<?xml version='1.0' encoding='ISO-8859-1'?>
<xsl:stylesheet version="1.0"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns:fo="http://www.w3.org/1999/XSL/Format"
xmlns:fox="http://xml.apache.org/fop/extensions"
exclude-result-prefixes="fo">
<xsl:template match="root">
<html>
<head>
<title>
<xsl:apply-templates select="title"/>
</title>
</head>
<body>
<xsl:apply-templates select="page"/>
</body>
</html>
</xsl:template>
<xsl:template match="page">
<xsl:apply-templates/>
</xsl:template>
<xsl:template match="title">
[Test]: <xsl:apply-templates/>
</xsl:template>
<xsl:template match="red">
<xsl:element name="span"><xsl:attribute name="style">color:red</xsl:attribute><xsl:apply-templates/></xsl:element>
</xsl:template>
<xsl:template match="text()">
<xsl:value-of disable-output-escaping="yes" select="."/>
</xsl:template>
</xsl:stylesheet> -
PHP need help formating date, please.
I am working on my first database page using repeating fields
and a
connection to MySQL, and actually have it working! Yay!
Now I have a formatting problem, and would appreciate a bit
of help.
The first column of the repeating field is a date field,
which is stored
as a date type in mysql, and shows up in my table as
2008-03-12 (which
is how it was entered into the table). I would like to change
the
display to March 12, 2008. I have tried using the date
function, but
without success. The text that php is putting in the cell is
"2008-03-12", which I am guessing is not a valid timestamp. I
am also
guessing that this is why I get a date in 1969 when I try
this...
The page is here:
http://www.verodelmar.com/agendas.php
and the source is here:
http://www.verodelmar.com/agendas.txt
Thanks to anyone that takes the time to look!
HarveyJoe Makowiec wrote:
> On 16 Apr 2008 in macromedia.dreamweaver, eclipsme
wrote:
>
>> The first column of the repeating field is a date
field, which is
>> stored as a date type in mysql, and shows up in my
table as
>> 2008-03-12 (which is how it was entered into the
table). I would
>> like to change the display to March 12, 2008. I have
tried using the
>> date function, but without success. The text that
php is putting in
>> the cell is "2008-03-12", which I am guessing is not
a valid
>> timestamp. I am also guessing that this is why I get
a date in 1969
>> when I try this...
>
> Use DATE_FORMAT in your SQL statement, thus:
>
> SELECT field1, field2,
> DATE_FORMAT(dateField, '%M %e, %Y') AS myFormattedDate
> FROM myTable
>
>
http://dev.mysql.com/doc/refman/5.0/en/date-and-time-functions.html#function_date-format
>
> Another option is to convert the date from ISO format to
a Unix
> timestamp using PHP's strtotime() function, then
formatting it using
> date():
>
> <?php
> // Done in several steps for clarity. Can be done in one
step.
> $myUnixTimestamp =
strtotime($row_Recordset1['mydatefield']);
> $myFormattedDate = date('F j, Y', $myUnixTimestamp);
> echo $myFormattedDate;
> ?>
>
>
http://www.php.net/strtotime
>
http://www.php.net/date
>
The former I think I understand.
The latter I have printed out and will look at some more.
Actually in
theory I understand, but how to do that in my control panel
is what I
need to look at.
Thanks!
Harvey -
Need help doing text search of Blob
I presently have a simple single table candidate tracking application that create records of candidate information and you attach their resume in a word format into a blob column named RESUME within the table.
I need to be able to do a full text boolean search of the attached documents, since we're going to use this to allow us to search an internal database for people with particular skill sets.
I'm not a DBA or a developer, I just started working with Oracle Application Express and need a simple way of creating this search feature.
I also need to add the search feature into a region for users to input search terms.
Any help would be greatly appreciated.
Edited by: user10608055 on Nov 25, 2008 11:57 AMtry
http://tahiti.oracle.com/
in the list of books, look at 'TEX' for Oracle text.
Interesting you should bring this up. I'm slighly involved with US Transition team.
Many resumes are coming in.
Tim -
Ok here is my problem, the drive got corrupted (my fault, the drive was getting scanned and it lost power) now i hade hopes of restoring it, but that fell through (nothing important was on it) so now i try to format the drive and i get an input and out put error, then i try to partion it, but that also fails.....so then i connected it to my windows and to access the drive i have to go through disk manager and the partion and the format fails...this also happens to another drive of mine that was corrupted form another issue......
i have giiven u every piece of inforamtion i have, please help me, also i want all information on the enclousre, and azny update drivers for it, i hope i have given enough information
Here is the EXACT drive in question.
http://www.geeks.com/details.asp?invtid=AP35-C&cat=CAS
Here is the EXACT hard drive i use.
Link
here is all the information on my compouter
Cingullar
4/26/05 11:33 PM
Hardware:
Hardware Overview:
Machine Name: PowerBook G4 15"
Machine Model: PowerBook5,6
CPU Type: PowerPC G4 (1.2)
Number Of CPUs: 1
CPU Speed: 1.67 GHz
L2 Cache (per CPU): 512 KB
Memory: 1 GB
Bus Speed: 167 MHz
Boot ROM Version: 4.9.1f1
Serial Number: xxxxXLRG4
Network:
Built-in Ethernet:
Type: Ethernet
Hardware: Ethernet
BSD Device Name: en0
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: Manual
ExcludeSimpleHostnames: 0
FTP Passive Mode: Yes
Auto Discovery Enabled: No
Ethernet:
MAC Address: 00:11:24:88:bf:e8
Media Options:
Media Subtype: none
AirPort:
Type: AirPort
Hardware: AirPort
BSD Device Name: en1
IPv4 Addresses: 192.168.2.6
IPv4:
Addresses: 192.168.2.6
Configuration Method: DHCP
Interface Name: en1
Router: 192.168.2.1
Subnet Masks: 255.255.255.0
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Default Zone: *
Interface Name: en1
Network ID: 65307
Node ID: 151
DNS:
Domain Name: Belkin
Server Addresses: 192.168.2.1
DHCP Server Responses:
Domain Name: Belkin
Domain Name Servers: 192.168.2.1
Lease Duration (seconds): 0
DHCP Message Type: 0x05
Routers: 192.168.2.1
Server Identifier: 192.168.2.1
Subnet Mask: 255.255.255.0
Proxies:
Proxy Configuration Method: Manual
ExcludeSimpleHostnames: 0
FTP Passive Mode: No
HTTP Proxy Enabled: No
HTTP Proxy Port: 8999
HTTP Proxy Server: 127.0.0.1
HTTPS Proxy Enabled: No
HTTPS Proxy Port: 8999
HTTPS Proxy Server: 127.0.0.1
Auto Discovery Enabled: No
Ethernet:
MAC Address: 00:11:24:9c:3d:aa
Media Options:
Media Subtype: autoselect
Internal Modem:
Type: PPP (PPPSerial)
Hardware: Modem
BSD Device Name: modem
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: Manual
ExcludeSimpleHostnames: 0
FTP Passive Mode: Yes
Auto Discovery Enabled: No
Bluetooth:
Type: PPP (PPPSerial)
Hardware: Modem
BSD Device Name: Bluetooth-Modem
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: Manual
ExcludeSimpleHostnames: 0
FTP Passive Mode: Yes
Auto Discovery Enabled: No
Built-in FireWire:
Type: FireWire
Hardware: FireWire
BSD Device Name: fw0
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: Manual
ExcludeSimpleHostnames: 0
FTP Passive Mode: Yes
Auto Discovery Enabled: No
Ethernet:
MAC Address: 00:11:24:ff:fe:88:bf:e8
Media Options: Full Duplex
Media Subtype: autoselect
VPN (L2TP):
Type: PPP (L2TP)
IPv4:
Configuration Method: PPP
OverridePrimary: 1
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: Manual
ExcludeSimpleHostnames: 0
FTP Passive Mode: Yes
Auto Discovery Enabled: No
Software:
System Software Overview:
System Version: Mac OS X 10.4.6 (8I127)
Kernel Version: Darwin 8.6.0
Boot Volume: Steven
Computer Name: Cingullar
User Name: Steven Feldman (steven)
ATA:
ATA Bus:
MATSHITADVD-R UJ-845E:
Model: MATSHITADVD-R UJ-845E
Revision: DMP2
Serial Number:
Detachable Drive: No
Protocol: ATAPI
Unit Number: 0
Socket Type: Internal
ATA Bus:
FUJITSU MHT2080AH:
Capacity: 74.53 GB
Model: FUJITSU MHT2080AH
Revision: 81EC
Serial Number: NP0PT552APF0
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Protocol: ATA
Unit Number: 0
Socket Type: Internal
OS9 Drivers: No
S.M.A.R.T. status: Verified
Volumes:
Steven:
Capacity: 74.41 GB
Available: 3.25 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s3
Mount Point: /
Audio (Built In):
Built In Sound Card:
Devices:
Texas Instruments TAS3004:
Inputs and Outputs:
Internal Microphone:
Controls: Left, Right
Playthrough: Yes
PluginID: TAS
Line Level Input:
Controls: Left, Right
Playthrough: Yes
PluginID: TAS
Headphones:
Controls: Mute, Left, Right
PluginID: TAS
Internal Speakers:
Controls: Mute, Left, Right
PluginID: TAS
Formats:
PCM 16:
Bit Depth: 16
Bit Width: 16
Channels: 2
Mixable: Yes
Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
PCM 24:
Bit Depth: 24
Bit Width: 32
Channels: 2
Mixable: Yes
Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
Bluetooth:
Apple Bluetooth Software Version: 1.7.3f4
Services:
Bluetooth File Transfer:
Folder other devices can browse: ~/Pictures
Requires Authentication: Yes
State: Enabled
Bluetooth File Exchange:
Folder for accepted items: ~/Documents/Shared
Requires Authentication: Yes
When other items are accepted: Ask
When PIM items are accepted: Ask
When receiving items: Prompt for each file
State: Enabled
Devices (Paired, Favorites, etc):
CingularUpdator:
Name: CingularUpdator
Address: 00-02-ee-e2-f3-ae
Type: Cellular Phone
Services: OBEX Object Push, OBEX File Transfer, Dial-up networking, Nokia PC Suite, COM 1, Voice Gateway, Audio Gateway, Client SYNCML, SIM ACCESS
Paired: Yes
Favorite: Yes
Connected: No
MotorolaPhone:
Name: MotorolaPhone
Address: 00-14-9a-79-ad-51
Type: Cellular Phone
Services: Voice Gateway, Hands-Free voice gateway, OBEX Object Push, OBEX File Transfer, Dial-up networking Gateway
Paired: Yes
Favorite: Yes
Connected: No
CingularUpdator:
Name: CingularUpdator
Address: 00-02-ee-e2-eb-ee
Type: Cellular Phone
Services: OBEX Object Push, OBEX File Transfer, Dial-up networking, Nokia PC Suite, COM 1, Voice Gateway, Audio Gateway, Client SYNCML, SIM ACCESS
Paired: Yes
Favorite: No
Connected: No
Nokia6820Greg:
Name: Nokia6820Greg
Address: 00-02-ee-e2-58-0b
Type: Cellular Phone
Services: OBEX Object Push, OBEX File Transfer, Dial-up networking, Nokia PC Suite, COM 1, Voice Gateway, Audio Gateway, Client SYNCML, SIM ACCESS
Paired: Yes
Favorite: No
Connected: No
Incoming Serial Ports:
Serial Port 1:
Name: Bluetooth-PDA-Sync
RFCOMM Channel: 3
Requires Authentication: Yes
Outgoing Serial Ports:
Serial Port 1:
Address: 00-02-EE-E2-EB-EE
Name: CingularUpdator-1
RFCOMM Channel: 15
Requires Authentication: No
Serial Port 2:
Address: 00-02-EE-E2-EB-EE
Name: CingularUpdator-2
RFCOMM Channel: 1
Requires Authentication: No
Serial Port 3:
Address:
Name: Bluetooth-Modem
RFCOMM Channel: 0
Requires Authentication: No
Diagnostics:
Power On Self-Test:
Last Run: 4/26/05 11:06 PM
Result: Passed
Apple Hardware Test:
Last Run: 4/10/06 3:26 PM
Version: 2.5 PB
Test Suite: Extended Test
Result: Passed
Disc Burning:
MATSHITA DVD-R UJ-845E:
Firmware Revision: DMP2
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, DVD-DAO
Media: No
FireWire:
FireWire Bus:
Maximum Speed: Up to 800 Mb/sec
Graphics/Displays:
ATI Mobility Radeon 9700:
Chipset Model: ATY,RV360M11
Type: Display
Bus: AGP
VRAM (Total): 64 MB
Vendor: ATI (0x1002)
Device ID: 0x4e50
Revision ID: 0x0000
ROM Revision: 113-xxxxx-145
Displays:
Color LCD:
Display Type: LCD
Resolution: 1280 x 854
Depth: 32-bit Color
Built-In: Yes
Core Image: Supported
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Display:
Status: No display connected
Memory:
SODIMM0/J25LOWER:
Size: 512 MB
Type: DDR SDRAM
Speed: PC2700U-25330
Status: OK
SODIMM1/J25UPPER:
Size: 512 MB
Type: DDR SDRAM
Speed: PC2700U-25330
Status: OK
PCI Cards:
TXN,PCIXXXX-00:
Name: cardbus
Type: cardbus
Bus: PCI
Slot: PC Card
Vendor ID: 0x104c
Device ID: 0xac56
Revision ID: 0x0000
Power:
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 0
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 20
Dynamic Power Step: No
Reduce Processor Speed: No
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On LAN: Yes
Wake On Modem Ring: Yes
Display Sleep Uses Dim: Yes
Battery Power:
System Sleep Timer (Minutes): 5
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 1
Dynamic Power Step: No
Reduce Processor Speed: Yes
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On Modem Ring: No
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
Battery Information:
Battery Installed: Yes
First low level warning: No
Full Charge Capacity (mAh): 3854
Remaining Capacity (mAh): 1464
Amperage (mA): 2433
Voltage (mV): 12116
Cycle Count: 158
AC Charger Information:
AC Charger (Watts): 65
Connected: Yes
Charging: Yes
Hardware Configuration:
Clamshell Closed: No
UPS Installed: No
Printers:
DESKJET 3820:
Status: Idle
Print Server: Local
Driver Version: 2.7.1
Default: No
URI: usb://HEWLETT-PACKARD/DESKJET 3820?serial=CN28J1B11118
PPD: hp deskjet 3820
PPD File Version: 1.0
PostScript Version: (3011.104) 0
DESKJET 3820:
Status: Stopped
Print Server: Local
Driver Version: 2.7.1
Default: No
URI: usb://HEWLETT-PACKARD/DESKJET 3820?serial=CN28J1B11118
PPD: hp deskjet 3820
PPD File Version: 1.0
PostScript Version: (3011.104) 0
deskjet 5550:
Status: Stopped
Print Server: Local
Driver Version: 2.7.1
Default: No
URI: usb://hp/deskjet 5550?serial=MY37I1S1SB2L
PPD: hp deskjet 5550
PPD File Version: 1.0
PostScript Version: (3011.104) 0
deskjet 5550:
Status: Stopped
Print Server: Local
Driver Version: 2.7.1
Default: No
URI: usb://hp/deskjet 5550?serial=MY37I1S1SB2L
PPD: hp deskjet 5550
PPD File Version: 1.0
PostScript Version: (3011.104) 0
deskjet 5600:
Status: Idle
Print Server: Local
Driver Version: 2.7.1
Default: Yes
URI: usb://hp/deskjet 5600?serial=MY48A4N3SS79
PPD: hp deskjet 5600
PPD File Version: 1.0
PostScript Version: (3011.104) 0
deskjet 5600:
Status: Idle
Print Server: Local
Driver Version: 2.7.1
Default: No
URI: usb://hp/deskjet 5600?serial=MY48A4N3SS79
PPD: hp deskjet 5600
PPD File Version: 1.0
PostScript Version: (3011.104) 0
hppsc131:
Status: Idle
Print Server: Local
Driver Version: 10.4
Default: No
URI: smb://Home/Stevenpc/hppsc131
PPD: Generic PostScript Printer
PPD File Version: 1.0
PostScript Version: (2000.0) 1
USB:
USB High-Speed Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBEHCI
PCI Device ID: 0x00e0
PCI Revision ID: 0x0004
PCI Vendor ID: 0x1033
Bus Number: 0x5b
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x003f
PCI Revision ID: 0x0000
PCI Vendor ID: 0x106b
Bus Number: 0x1a
Bluetooth HCI:
Version: 19.65
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Product ID: 0x8205
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Internal Keyboard/Trackpad:
Version: 0.28
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Apple Computer
Product ID: 0x020e
Vendor ID: 0x05ac (Apple Computer, Inc.)
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0035
PCI Revision ID: 0x0043
PCI Vendor ID: 0x1033
Bus Number: 0x1b
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0035
PCI Revision ID: 0x0043
PCI Vendor ID: 0x1033
Bus Number: 0x3b
AirPort Card:
AirPort Card Information:
Wireless Card Type: AirPort Extreme
Wireless Card Locale: USA
Wireless Card Firmware Version: 404.2 (3.90.34.0.p16)
Current Wireless Network: belkin54g
Wireless Channel: 11
Firewall:
Apple Remote Desktop:
Policy: Denied
TCP Ports: 3283, 5900
iPhoto Bonjour Sharing:
Policy: Denied
TCP Ports: 8770
Remote Login - SSH:
Policy: Denied
TCP Ports: 22
diablo II:
Policy: Allowed
TCP Ports: 6112
UDP Ports: 6112
Personal File Sharing:
Policy: Denied
TCP Ports: 548, 427
Network Time:
Policy: Allowed
UDP Ports: 123
Adobe Version Cue CS2:
Policy: Allowed
TCP Ports: 3703, 427, 50800
iTunes Music Sharing:
Policy: Allowed
TCP Ports: 3689
FTP Access:
Policy: Denied
TCP Ports: 21
iChat Bonjour:
Policy: Denied
TCP Ports: 5297, 5298
Personal Web Sharing:
Policy: Denied
TCP Ports: 80, 427, 443
Remote Apple Events:
Policy: Denied
TCP Ports: 3031
d2:
Policy: Allowed
TCP Ports: 6112
UDP Ports: 6112
Windows Sharing:
Policy: Denied
TCP Ports: 139
Printer Sharing:
Policy: Denied
TCP Ports: 631, 515
Locations:
School EtherNet:
Active Location: No
Services:
Internal Modem:
Type: PPP
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Proxy Enabled: 1
FTP Passive Mode: 1
FTP Proxy Port: 8002
FTP Proxy Server: sfh-px1
Gopher Proxy Enabled: 1
Gopher Proxy Port: 8002
Gopher Proxy Server: sfh-px1
HTTP Proxy Enabled: 1
HTTP Proxy Port: 8002
HTTP Proxy Server: sfh-px1
HTTPS Proxy Enabled: 1
HTTPS Proxy Port: 8002
HTTPS Proxy Server: sfh-px1
Auto Discovery Enabled: 0
SOCKS Proxy Enabled: 1
SOCKS Proxy Port: 8002
SOCKS Proxy Server: sfh-px1
PPP:
ACSP Enabled: 0
Display Terminal Window: 0
Redial Count: 1
Redial Enabled: 1
Redial Interval: 5
Use Terminal Script: 0
Dial On Demand: 0
Disconnect On Fast User Switch: 1
Disconnect On Idle: 1
Disconnect On Idle Timer: 600
Disconnect On Logout: 1
Disconnect On Sleep: 1
Idle Reminder: 0
Idle Reminder Time: 1800
IPCP Compression VJ: 1
LCP Echo Enabled: 1
LCP Echo Failure: 4
LCP Echo Interval: 10
Log File: /var/log/ppp.log
Verbose Logging: 0
Bluetooth:
Type: PPP
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
PPP:
ACSP Enabled: 0
Display Terminal Window: 0
Redial Count: 1
Redial Enabled: 1
Redial Interval: 5
Use Terminal Script: 0
Dial On Demand: 0
Disconnect On Fast User Switch: 1
Disconnect On Idle: 1
Disconnect On Idle Timer: 600
Disconnect On Logout: 1
Disconnect On Sleep: 1
Idle Reminder: 0
Idle Reminder Time: 1800
IPCP Compression VJ: 1
LCP Echo Enabled: 0
LCP Echo Failure: 4
LCP Echo Interval: 10
Log File: /var/log/ppp.log
Verbose Logging: 0
Built-in Ethernet:
Type: Ethernet
BSD Device Name: en0
Hardware (MAC) Address: 00:11:24:88:bf:e8
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
Exceptions List: Localhost, 127.0.0.1, .*.
ExcludeSimpleHostnames: 1
FTP Proxy Enabled: 1
FTP Passive Mode: 1
FTP Proxy Port: 8002
FTP Proxy Server: Sfh-fs1
Gopher Proxy Enabled: 1
Gopher Proxy Port: 8002
Gopher Proxy Server: Sfh-fs1
HTTP Proxy Enabled: 1
HTTP Proxy Port: 8002
HTTP Proxy Server: Sfh-fs1
HTTPS Proxy Enabled: 1
HTTPS Proxy Port: 8002
HTTPS Proxy Server: Sfh-fs1
Auto Discovery Enabled: 0
RTSP Proxy Enabled: 1
RTSP Proxy Port: 8002
RTSP Proxy Server: Sfh-fs1
SOCKS Proxy Enabled: 0
SOCKS Proxy Port: 8002
SOCKS Proxy Server: Sfh-fs1
Built-in FireWire:
Type: FireWire
BSD Device Name: fw0
Hardware (MAC) Address: 00:11:24:ff:fe:88:bf:e8
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
AirPort:
Type: Ethernet
BSD Device Name: en1
Hardware (MAC) Address: 00:11:24:9c:3d:aa
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
Exceptions List: Localhost, 127.0.0.1, .*.
ExcludeSimpleHostnames: 1
FTP Proxy Enabled: 1
FTP Passive Mode: 1
FTP Proxy Port: 8002
FTP Proxy Server: Sfh-fs1
Gopher Proxy Enabled: 1
Gopher Proxy Port: 8002
Gopher Proxy Server: Sfh-fs1
HTTP Proxy Enabled: 1
HTTP Proxy Port: 8002
HTTP Proxy Server: Sfh-fs1
HTTPS Proxy Enabled: 1
HTTPS Proxy Port: 8002
HTTPS Proxy Server: Sfh-fs1
Auto Discovery Enabled: 0
RTSP Proxy Enabled: 1
RTSP Proxy Port: 8002
RTSP Proxy Server: Sfh-fs1
Dads House:
Active Location: No
Services:
AirPort:
Type: Ethernet
BSD Device Name: en1
Hardware (MAC) Address: 00:11:24:9c:3d:aa
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 0
Auto Discovery Enabled: 0
Internal Modem:
Type: PPP
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
PPP:
ACSP Enabled: 0
Display Terminal Window: 0
Redial Count: 1
Redial Enabled: 1
Redial Interval: 5
Use Terminal Script: 0
Dial On Demand: 0
Disconnect On Fast User Switch: 1
Disconnect On Idle: 1
Disconnect On Idle Timer: 600
Disconnect On Logout: 1
Disconnect On Sleep: 1
Idle Reminder: 0
Idle Reminder Time: 1800
IPCP Compression VJ: 1
LCP Echo Enabled: 1
LCP Echo Failure: 4
LCP Echo Interval: 10
Log File: /var/log/ppp.log
Verbose Logging: 0
Bluetooth:
Type: PPP
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
PPP:
ACSP Enabled: 0
Display Terminal Window: 0
Redial Count: 1
Redial Enabled: 1
Redial Interval: 5
Use Terminal Script: 0
Dial On Demand: 0
Disconnect On Fast User Switch: 1
Disconnect On Idle: 1
Disconnect On Idle Timer: 600
Disconnect On Logout: 1
Disconnect On Sleep: 1
Idle Reminder: 0
Idle Reminder Time: 1800
IPCP Compression VJ: 1
LCP Echo Enabled: 0
LCP Echo Failure: 4
LCP Echo Interval: 10
Log File: /var/log/ppp.log
Verbose Logging: 0
Built-in Ethernet:
Type: Ethernet
BSD Device Name: en0
Hardware (MAC) Address: 00:11:24:88:bf:e8
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
Ethernet:
Media Subtype: autoselect
MTU: 1500
Built-in FireWire:
Type: FireWire
BSD Device Name: fw0
Hardware (MAC) Address: 00:11:24:ff:fe:88:bf:e8
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
Location (1/4/06 4:15 PM):
Active Location: No
Services:
Internal Modem:
Type: PPP
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
PPP:
ACSP Enabled: 0
Display Terminal Window: 0
Redial Count: 1
Redial Enabled: 1
Redial Interval: 5
Use Terminal Script: 0
Dial On Demand: 0
Disconnect On Fast User Switch: 1
Disconnect On Idle: 1
Disconnect On Idle Timer: 600
Disconnect On Logout: 1
Disconnect On Sleep: 1
Idle Reminder: 0
Idle Reminder Time: 1800
IPCP Compression VJ: 1
LCP Echo Enabled: 1
LCP Echo Failure: 4
LCP Echo Interval: 10
Log File: /var/log/ppp.log
Verbose Logging: 0
Bluetooth:
Type: PPP
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
PPP:
ACSP Enabled: 0
Display Terminal Window: 0
Redial Count: 1
Redial Enabled: 1
Redial Interval: 5
Use Terminal Script: 0
Dial On Demand: 0
Disconnect On Fast User Switch: 1
Disconnect On Idle: 1
Disconnect On Idle Timer: 600
Disconnect On Logout: 1
Disconnect On Sleep: 1
Idle Reminder: 0
Idle Reminder Time: 1800
IPCP Compression VJ: 1
LCP Echo Enabled: 0
LCP Echo Failure: 4
LCP Echo Interval: 10
Log File: /var/log/ppp.log
Verbose Logging: 0
Built-in Ethernet:
Type: Ethernet
BSD Device Name: en0
Hardware (MAC) Address: 00:11:24:88:bf:e8
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
Built-in FireWire:
Type: FireWire
BSD Device Name: fw0
Hardware (MAC) Address: 00:11:24:ff:fe:88:bf:e8
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
AirPort:
Type: Ethernet
BSD Device Name: en1
Hardware (MAC) Address: 00:11:24:9c:3d:aa
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
Moms Wireless:
Active Location: No
Services:
Internal Modem:
Type: PPP
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
PPP:
ACSP Enabled: 0
Display Terminal Window: 0
Redial Count: 1
Redial Enabled: 1
Redial Interval: 5
Use Terminal Script: 0
Dial On Demand: 0
Disconnect On Fast User Switch: 1
Disconnect On Idle: 1
Disconnect On Idle Timer: 600
Disconnect On Logout: 1
Disconnect On Sleep: 1
Idle Reminder: 0
Idle Reminder Time: 1800
IPCP Compression VJ: 1
LCP Echo Enabled: 1
LCP Echo Failure: 4
LCP Echo Interval: 10
Log File: /var/log/ppp.log
Verbose Logging: 0
Bluetooth:
Type: PPP
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
PPP:
ACSP Enabled: 0
Display Terminal Window: 0
Redial Count: 1
Redial Enabled: 1
Redial Interval: 5
Use Terminal Script: 0
Dial On Demand: 0
Disconnect On Fast User Switch: 1
Disconnect On Idle: 1
Disconnect On Idle Timer: 600
Disconnect On Logout: 1
Disconnect On Sleep: 1
Idle Reminder: 0
Idle Reminder Time: 1800
IPCP Compression VJ: 1
LCP Echo Enabled: 0
LCP Echo Failure: 4
LCP Echo Interval: 10
Log File: /var/log/ppp.log
Verbose Logging: 0
Built-in Ethernet:
Type: Ethernet
BSD Device Name: en0
Hardware (MAC) Address: 00:11:24:88:bf:e8
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
Built-in FireWire:
Type: FireWire
BSD Device Name: fw0
Hardware (MAC) Address: 00:11:24:ff:fe:88:bf:e8
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
AirPort:
Type: Ethernet
BSD Device Name: en1
Hardware (MAC) Address: 00:11:24:9c:3d:aa
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
VPN (L2TP):
Type: PPP
IPv4:
Configuration Method: PPP
OverridePrimary: 1
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
PPP:
ACSP Enabled: 1
Display Terminal Window: 0
Redial Count: 1
Redial Enabled: 0
Redial Interval: 5
Use Terminal Script: 0
Dial On Demand: 0
Disconnect On Fast User Switch: 1
Disconnect On Idle: 0
Disconnect On Idle Timer: 600
Disconnect On Logout: 1
Disconnect On Sleep: 0
Idle Reminder: 0
Idle Reminder Time: 1800
IPCP Compression VJ: 0
LCP Echo Enabled: 1
LCP Echo Failure: 15
LCP Echo Interval: 20
Log File: /var/log/ppp.log
Verbose Logging: 0
Automactic:
Active Location: Yes
Services:
Built-in Ethernet:
Type: Ethernet
BSD Device Name: en0
Hardware (MAC) Address: 00:11:24:88:bf:e8
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
Ethernet:
Media Subtype: autoselect
MTU: 1500
AirPort:
Type: Ethernet
BSD Device Name: en1
Hardware (MAC) Address: 00:11:24:9c:3d:aa
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 0
HTTP Proxy Enabled: 0
HTTP Proxy Port: 8999
HTTP Proxy Server: 127.0.0.1
HTTPS Proxy Enabled: 0
HTTPS Proxy Port: 8999
HTTPS Proxy Server: 127.0.0.1
Auto Discovery Enabled: 0
Internal Modem:
Type: PPP
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
PPP:
ACSP Enabled: 0
Authorization Name: Nighteaater537
Authorization Password: <002d003d 002d003d 002d003d >
Display Terminal Window: 0
Redial Count: 1
Redial Enabled: 0
Redial Interval: 5
Remote Address: 772-546-3768
Use Terminal Script: 0
Dial On Demand: 0
Disconnect On Fast User Switch: 1
Disconnect On Idle: 1
Disconnect On Idle Timer: 600
Disconnect On Logout: 1
Disconnect On Sleep: 1
Idle Reminder: 1
Idle Reminder Time: 1800
IPCP Compression VJ: 1
LCP Echo Enabled: 0
LCP Echo Failure: 4
LCP Echo Interval: 10
Log File: /var/log/ppp.log
Verbose Logging: 0
Bluetooth:
Type: PPP
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
PPP:
ACSP Enabled: 0
Display Terminal Window: 0
Redial Count: 1
Redial Enabled: 1
Redial Interval: 5
Use Terminal Script: 0
Dial On Demand: 0
Disconnect On Fast User Switch: 1
Disconnect On Idle: 1
Disconnect On Idle Timer: 180
Disconnect On Logout: 1
Disconnect On Sleep: 1
Idle Reminder: 1
Idle Reminder Time: 1800
IPCP Compression VJ: 1
LCP Echo Enabled: 1
LCP Echo Failure: 4
LCP Echo Interval: 10
Log File: /var/log/ppp.log
Verbose Logging: 0
Built-in FireWire:
Type: FireWire
BSD Device Name: fw0
Hardware (MAC) Address: 00:11:24:ff:fe:88:bf:e8
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
VPN (L2TP):
Type: PPP
IPv4:
Configuration Method: PPP
OverridePrimary: 1
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
PPP:
ACSP Enabled: 1
Display Terminal Window: 0
Redial Count: 1
Redial Enabled: 0
Redial Interval: 5
Use Terminal Script: 0
Dial On Demand: 0
Disconnect On Fast User Switch: 1
Disconnect On Idle: 0
Disconnect On Idle Timer: 600
Disconnect On Logout: 1
Disconnect On Sleep: 0
Idle Reminder: 0
Idle Reminder Time: 1800
IPCP Compression VJ: 0
LCP Echo Enabled: 1
LCP Echo Failure: 15
LCP Echo Interval: 20
Log File: /var/log/ppp.log
Verbose Logging: 0
MacTOPc:
Active Location: No
Services:
Internal Modem:
Type: PPP
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
PPP:
ACSP Enabled: 0
Display Terminal Window: 0
Redial Count: 1
Redial Enabled: 1
Redial Interval: 5
Use Terminal Script: 0
Dial On Demand: 0
Disconnect On Fast User Switch: 1
Disconnect On Idle: 1
Disconnect On Idle Timer: 600
Disconnect On Logout: 1
Disconnect On Sleep: 1
Idle Reminder: 0
Idle Reminder Time: 1800
IPCP Compression VJ: 1
LCP Echo Enabled: 1
LCP Echo Failure: 4
LCP Echo Interval: 10
Log File: /var/log/ppp.log
Verbose Logging: 0
Bluetooth:
Type: PPP
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
PPP:
ACSP Enabled: 0
Display Terminal Window: 0
Redial Count: 1
Redial Enabled: 1
Redial Interval: 5
Use Terminal Script: 0
Dial On Demand: 0
Disconnect On Fast User Switch: 1
Disconnect On Idle: 1
Disconnect On Idle Timer: 600
Disconnect On Logout: 1
Disconnect On Sleep: 1
Idle Reminder: 0
Idle Reminder Time: 1800
IPCP Compression VJ: 1
LCP Echo Enabled: 0
LCP Echo Failure: 4
LCP Echo Interval: 10
Log File: /var/log/ppp.log
Verbose Logging: 0
Built-in Ethernet:
Type: Ethernet
BSD Device Name: en0
Hardware (MAC) Address: 00:11:24:88:bf:e8
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
Built-in FireWire:
Type: FireWire
BSD Device Name: fw0
Hardware (MAC) Address: 00:11:24:ff:fe:88:bf:e8
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
AirPort:
Type: Ethernet
BSD Device Name: en1
Hardware (MAC) Address: 00:11:24:9c:3d:aa
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
VPN (PPTP):
Type: PPP
IPv4:
Configuration Method: PPP
OverridePrimary: 1
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
PPP:
ACSP Enabled: 1
CCP Enabled: 1
Display Terminal Window: 0
Redial Count: 1
Redial Enabled: 0
Redial Interval: 5
Use Terminal Script: 0
Dial On Demand: 0
Disconnect On Fast User Switch: 1
Disconnect On Idle: 0
Disconnect On Idle Timer: 600
Disconnect On Logout: 1
Disconnect On Sleep: 0
Idle Reminder: 0
Idle Reminder Time: 1800
IPCP Compression VJ: 0
LCP Echo Enabled: 1
LCP Echo Failure: 15
LCP Echo Interval: 20
Log File: /var/log/ppp.log
Verbose Logging: 0
School:
Active Location: No
Services:
Internal Modem:
Type: PPP
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Proxy Enabled: 1
FTP Passive Mode: 0
FTP Proxy Port: 8002
FTP Proxy Server: sfh-px1
Gopher Proxy Enabled: 1
Gopher Proxy Port: 8002
Gopher Proxy Server: sfh-px1
HTTP Proxy Enabled: 1
HTTP Proxy Port: 8002
HTTP Proxy Server: sfh-px1
HTTPS Proxy Enabled: 1
HTTPS Proxy Port: 8002
HTTPS Proxy Server: sfh-px1
Auto Discovery Enabled: 0
PPP:
ACSP Enabled: 0
Display Terminal Window: 0
Redial Count: 1
Redial Enabled: 1
Redial Interval: 5
Use Terminal Script: 0
Dial On Demand: 0
Disconnect On Fast User Switch: 1
Disconnect On Idle: 1
Disconnect On Idle Timer: 600
Disconnect On Logout: 1
Disconnect On Sleep: 1
Idle Reminder: 0
Idle Reminder Time: 1800
IPCP Compression VJ: 1
LCP Echo Enabled: 1
LCP Echo Failure: 4
LCP Echo Interval: 10
Log File: /var/log/ppp.log
Verbose Logging: 0
Bluetooth:
Type: PPP
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
PPP:
ACSP Enabled: 0
Display Terminal Window: 0
Redial Count: 1
Redial Enabled: 1
Redial Interval: 5
Use Terminal Script: 0
Dial On Demand: 0
Disconnect On Fast User Switch: 1
Disconnect On Idle: 1
Disconnect On Idle Timer: 600
Disconnect On Logout: 1
Disconnect On Sleep: 1
Idle Reminder: 0
Idle Reminder Time: 1800
IPCP Compression VJ: 1
LCP Echo Enabled: 0
LCP Echo Failure: 4
LCP Echo Interval: 10
Log File: /var/log/ppp.log
Verbose Logging: 0
Built-in Ethernet:
Type: Ethernet
BSD Device Name: en0
Hardware (MAC) Address: 00:11:24:88:bf:e8
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 1
FTP Proxy Enabled: 1
FTP Passive Mode: 0
FTP Proxy Port: 8002
FTP Proxy Server: ic-px1
Gopher Proxy Enabled: 1
Gopher Proxy Port: 8002
Gopher Proxy Server: ic-px1
HTTP Proxy Enabled: 1
HTTP Proxy Port: 8002
HTTP Proxy Server: ic-px1
HTTPS Proxy Enabled: 1
HTTPS Proxy Port: 8002
HTTPS Proxy Server: ic-px1
Auto Discovery Enabled: 0
RTSP Proxy Enabled: 1
RTSP Proxy Port: 8002
RTSP Proxy Server: ic-px1
Built-in FireWire:
Type: FireWire
BSD Device Name: fw0
Hardware (MAC) Address: 00:11:24:ff:fe:88:bf:e8
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
AirPort:
Type: Ethernet
BSD Device Name: en1
Hardware (MAC) Address: 00:11:24:9c:3d:aa
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
Modems:
Modem Information:
Modem Model: Jump
Interface Type: I2S
Modulation: V.92
Hardware Version: Version 1.0
Driver: MotorolaSM56K.kext (v1.3.3)
Country: B5 (United States, Latin America)
Applications:
Acrobat Reader 5:
Version: 5.0.5
Last Modified: 10/19/05 10:31 PM
Kind: Native (Preferred) or Classic
Location: /Applications/1-EDITING STUFF/ADOBE/Acrobat Reader 5.0
Acrobat Distiller 7.0:
Version: 7.0.7
Last Modified: 11/11/05 12:19 PM
Kind: PowerPC
Get Info String: Acrobat Distiller™ 7.0.7, 1984-2006 Adobe Systems Incorporated. All rights reserved.
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Acrobat 7.0 Professional/Acrobat Distiller 7.0.app
Acrobat Uninstaller:
Version: Acrobat Uninstaller version 7.0.7
Last Modified: 11/11/05 12:19 PM
Kind: PowerPC
Get Info String: Acrobat Uninstaller version 7.0.7, Copyright © 2005 by Adobe Systems, Incorporated. All rights reserved.
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Acrobat 7.0 Professional/Acrobat Uninstaller.app
Adobe Acrobat 7.0 Professional:
Version: 7.0.7
Last Modified: 11/11/05 12:19 PM
Kind: PowerPC
Get Info String: Adobe® Acrobat® 7.0.7, ©1984-2005 Adobe Systems Incorporated. All rights reserved.
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Acrobat 7.0 Professional/Adobe Acrobat 7.0 Professional.app
Bridge:
Version: 1.0.0.545
Last Modified: 11/11/05 11:58 AM
Kind: PowerPC
Get Info String: 1.0.0.545 (93460), Copyright 2003-2005, Adobe
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Bridge/Bridge.app
Adobe GoLive CS2:
Version: 8.0
Last Modified: 11/11/05 12:31 PM
Kind: PowerPC
Get Info String: 8.0, Copyright © 1997-2005 Adobe Systems Incorporated. All rights reserved.
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe GoLive CS2/Adobe GoLive CS2.app
Adobe Help Center:
Version: Adobe Help Center 1.0.0.793
Last Modified: 11/11/05 11:58 AM
Kind: PowerPC
Get Info String: Adobe Help Center 1.0.0.793 (C) 2005 Adobe Systems, Inc. All rights reserved.
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Help Center.app
Illustrator:
Version: 12.0.0
Last Modified: 11/11/05 12:15 PM
Kind: PowerPC
Get Info String: 12.0.0, Copyright © 1987-2005 Adobe Systems Inc. All rights reserved.
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Illustrator CS2/Adobe Illustrator.app
Demonstrator:
Version: 2.0
Last Modified: 11/11/05 12:15 PM
Kind: PowerPC
Get Info String: 1.0
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Illustrator CS2/Demonstrator/Demonstrator.app
Analyze Documents:
Last Modified: 11/11/05 12:15 PM
Kind: Native (Preferred) or Classic
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Illustrator CS2/Scripting.localized/Sample Scripts.localized/AppleScript/Analyze Documents.localized/Analyze Documents.app
Make Calendar:
Last Modified: 11/11/05 12:15 PM
Kind: Native (Preferred) or Classic
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Illustrator CS2/Scripting.localized/Sample Scripts.localized/AppleScript/Calendar.localized/Make Calendar.app
Collect for Output:
Last Modified: 11/11/05 12:15 PM
Kind: Native (Preferred) or Classic
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Illustrator CS2/Scripting.localized/Sample Scripts.localized/AppleScript/Collect for Output.localized/Collect for Output.app
Contact Sheets:
Last Modified: 11/11/05 12:15 PM
Kind: Native (Preferred) or Classic
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Illustrator CS2/Scripting.localized/Sample Scripts.localized/AppleScript/Contact Sheet Demo.localized/Contact Sheets.app
Dataset Batch PDF from Text:
Last Modified: 11/11/05 12:15 PM
Kind: PowerPC
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Illustrator CS2/Scripting.localized/Sample Scripts.localized/AppleScript/Datasets.localized/Dataset Batch PDF from Text.app
Export Flash Animation:
Last Modified: 11/11/05 12:15 PM
Kind: Native (Preferred) or Classic
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Illustrator CS2/Scripting.localized/Sample Scripts.localized/AppleScript/Export Flash Animation.localized/Export Flash Animation.app
Web Gallery:
Last Modified: 11/11/05 12:15 PM
Kind: Native (Preferred) or Classic
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Illustrator CS2/Scripting.localized/Sample Scripts.localized/AppleScript/Web Gallery.localized/Web Gallery.app
Adobe InDesign CS2:
Version: 4.0.0.421
Last Modified: 11/11/05 12:07 PM
Kind: PowerPC
Get Info String: 4.0, Copyright 2000-2005 Adobe Systems Incorporated. All rights reserved.
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe InDesign CS2/Adobe InDesign CS2.app
Adobe ImageReady CS2:
Version: 9.0x196
Last Modified: 11/11/05 12:02 PM
Kind: PowerPC
Get Info String: 9.0x196, Copyright © 1998-2005 Adobe Systems Incorporated
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Adobe ImageReady CS2.app
Adobe Photoshop CS2:
Version: 9.0 (9.0x196)
Last Modified: 11/11/05 12:02 PM
Kind: PowerPC
Get Info String: 9.0 (9.0x196), Copyright ©1990-2005 Adobe Systems Incorporated
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Adobe Photoshop CS2.app
Constrain 350, Make JPG 30:
Last Modified: 3/22/05 10:25 AM
Kind: Native (Preferred) or Classic
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Samples/Droplets/ImageReady Droplets/Constrain 350, Make JPG 30.exe
Constrain to 200x200 pixels:
Last Modified: 3/22/05 10:25 AM
Kind: Native (Preferred) or Classic
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Samples/Droplets/ImageReady Droplets/Constrain to 200x200 pixels.exe
Constrain to 64X64 pixels:
Last Modified: 3/22/05 10:25 AM
Kind: Native (Preferred) or Classic
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Samples/Droplets/ImageReady Droplets/Constrain to 64X64 pixels.exe
Make Button:
Last Modified: 3/22/05 10:25 AM
Kind: Native (Preferred) or Classic
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Samples/Droplets/ImageReady Droplets/Make Button.exe
Make GIF (128 colors):
Last Modified: 3/22/05 10:25 AM
Kind: Native (Preferred) or Classic
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Samples/Droplets/ImageReady Droplets/Make GIF (128 colors).exe
Make GIF (32, no dither):
Last Modified: 3/22/05 10:25 AM
Kind: Native (Preferred) or Classic
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Samples/Droplets/ImageReady Droplets/Make GIF (32, no dither).exe
Make GIF (64 colors):
Last Modified: 3/22/05 10:25 AM
Kind: Native (Preferred) or Classic
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Samples/Droplets/ImageReady Droplets/Make GIF (64 colors).exe
Make JPEG (quality 10):
Last Modified: 3/22/05 10:25 AM
Kind: Native (Preferred) or Classic
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Samples/Droplets/ImageReady Droplets/Make JPEG (quality 10).exe
Make JPEG (quality 30):
Last Modified: 3/22/05 10:25 AM
Kind: Native (Preferred) or Classic
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Samples/Droplets/ImageReady Droplets/Make JPEG (quality 30).exe
Make JPEG (quality 60):
Last Modified: 3/22/05 10:25 AM
Kind: Native (Preferred) or Classic
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Samples/Droplets/ImageReady Droplets/Make JPEG (quality 60).exe
Metal Slide Thumbnail:
Last Modified: 3/22/05 10:25 AM
Kind: Native (Preferred) or Classic
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Samples/Droplets/ImageReady Droplets/Metal Slide Thumbnail.exe
Multi-Size Save:
Last Modified: 3/22/05 10:25 AM
Kind: Native (Preferred) or Classic
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Samples/Droplets/ImageReady Droplets/Multi-Size Save.exe
Rounded Rect Thumbnail:
Last Modified: 3/22/05 10:25 AM
Kind: Native (Preferred) or Classic
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Samples/Droplets/ImageReady Droplets/Rounded Rect Thumbnail.exe
Slide Thumbnail:
Last Modified: 3/22/05 10:25 AM
Kind: Native (Preferred) or Classic
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Samples/Droplets/ImageReady Droplets/Slide Thumbnail.exe
Unsharp Mask:
Last Modified: 3/22/05 10:25 AM
Kind: Native (Preferred) or Classic
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Samples/Droplets/ImageReady Droplets/Unsharp Mask.exe
Aged Photo:
Version: 9.0
Last Modified: 3/22/05 10:25 AM
Kind: Native (Preferred) or Classic
Get Info String: 9.0x087 ©1999-2003 Adobe Systems Incorporated
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Samples/Droplets/Photoshop Droplets/Aged Photo.exe
Conditional Mode Change:
Version: 9.0
Last Modified: 3/22/05 10:25 AM
Kind: Native (Preferred) or Classic
Get Info String: 9.0x087 ©1999-2003 Adobe Systems Incorporated
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Samples/Droplets/Photoshop Droplets/Conditional Mode Change.exe
Constrain to 300 pixels:
Version: 9.0
Last Modified: 3/22/05 10:25 AM
Kind: Native (Preferred) or Classic
Get Info String: 9.0x087 ©1999-2003 Adobe Systems Incorporated
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Samples/Droplets/Photoshop Droplets/Constrain to 300 pixels.exe
Constrain to 64 pixels:
Version: 9.0
Last Modified: 3/22/05 10:25 AM
Kind: Native (Preferred) or Classic
Get Info String: 9.0x087 ©1999-2003 Adobe Systems Incorporated
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Samples/Droplets/Photoshop Droplets/Constrain to 64 pixels.exe
Drop Shadow Frame:
Version: 9.0
Last Modified: 3/22/05 10:25 AM
Kind: Native (Preferred) or Classic
Get Info String: 9.0x087 ©1999-2003 Adobe Systems Incorporated
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Samples/Droplets/Photoshop Droplets/Drop Shadow Frame.exe
Make Button:
Version: 9.0
Last Modified: 3/22/05 10:25 AM
Kind: Native (Preferred) or Classic
Get Info String: 9.0x087 ©1999-2003 Adobe Systems Incorporated
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Samples/Droplets/Photoshop Droplets/Make Button.exe
Make Sepia Tone:
Version: 9.0
Last Modified: 3/22/05 10:25 AM
Kind: Native (Preferred) or Classic
Get Info String: 9.0x087 ©1999-2003 Adobe Systems Incorporated
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Samples/Droplets/Photoshop Droplets/Make Sepia Tone.exe
Save As JPEG Medium:
Version: 9.0
Last Modified: 3/22/05 10:25 AM
Kind: Native (Preferred) or Classic
Get Info String: 9.0x087 ©1999-2003 Adobe Systems Incorporated
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Samples/Droplets/Photoshop Droplets/Save As JPEG Medium.exe
Save As Photoshop PDF:
Version: 9.0
Last Modified: 3/22/05 10:25 AM
Kind: Native (Preferred) or Classic
Get Info String: 9.0x087 ©1999-2003 Adobe Systems Incorporated
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Samples/Droplets/Photoshop Droplets/Save As Photoshop PDF.exe
VersionCueCS2:
Version: 2.0
Last Modified: 11/11/05 12:02 PM
Kind: PowerPC
Get Info String: 2.0, Copyright ©2001-2004 Adobe Systems Incorporated
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Version Cue CS2/bin/VersionCueCS2.app
VersionCueCS2Status:
Version: 1.0.0
Last Modified: 11/11/05 12:02 PM
Kind: PowerPC
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Version Cue CS2/bin/VersionCueCS2Status.app
VC2Native:
Version: 2.0
Last Modified: 11/11/05 12:02 PM
Get Info String: 2.0.0, © 2003-2004 Adobe Systems Incorporated
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Version Cue CS2/plugins/com.adobe.versioncue.nativecomm_2.0.0/res/macosx/VC2Native.app
Uninstall Version Cue CS2:
Version: 0.1
Last Modified: 11/11/05 12:02 PM
Kind: PowerPC
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Version Cue CS2/Uninstall Version Cue CS2.app
DJ-1800 2.2.1:
Version: 2.2.1
Last Modified: 10/31/05 5:57 PM
Kind: PowerPCThe problem of losing power when running the drive, is that the needle may scratch part of the drive as it lands on the platter. Sufficient power may pick it up, but it may have permanently damaged the drive. I would get the drive itself replaced.
A format which fails is a sign of a hard drive failure. -
Need help formatting info.
I've been trying to save a temp. reading every 5 secs. I have a daqbook w/ a dbk82 using 15 type T thermocouples.With the example i hae the text file saves as so, 5 secs, 10 secs, 15secs..etc then the temps. also it isn't taking just one reading from each channel, its taking more like 10. how do i get 1 reading taken from each chaael every 5 secs....without lagging the rest of the system for 5 secs.
Hello VinnyC,
What hardware are you using to read the temperature? Is the dbk82 hardware that acquires temperature or are you using National Instruments hardware?
Your example just has the file I/O stuff and doesn't contain anything relating to the acquisition. If you have NI hardware you are acquiring with and are having problems I could help you out with that.
It seems to me that you will just need to acquire 1-point at a time in the case structure. You have the case structure setup to write to the file every 5 seconds, so if you read one point within the case structure and write that to file within the case structure, this should solve your problem. If you are using an NI DAQCard, you could use the 'AI Sample Channels VI' within the case which takes one
sample from each channel each time it's called.
I hope this helps.
Regards,
Todd D.
NI Applications Engineer -
Need help formating videos, have movie no sound question
ok i relize that a million questions have been asked about formating videos but i will make it million and one.
i have some vides that i made with windows movie maker and i also have some from lime wire. i read in another question to download video ipod converter, and i did i am just lil confuzed, i know my way around these programs so can some just tell me in lamins term like you are talking to an forgner tell me what steps i need to convert it and be able to have sound with movie. i have the 30g ipod english, lime wire, itunes, ipod converter, i just need the help
Cheers"i also have some from lime wire"
Please not that the majority of posters here will not help you if you are illegally downloading copyrighted material.
With regard to your home movies, you may find something useful here.
http://docs.info.apple.com/article.html?artnum=301461 -
I need some help with PE 12 and adding text...
this forum is for photoshop elements and photoshop elements doesn't support editing GIF.
You might want to post to photoshop community Photoshop General Discussion -
Need Help Printing Text Messages From E71
I need to print some saved text messages that are on my e71 but cannot ge **bleep** to hook up to my bluetooth printer it just never finds it. Is there another way to print these messages fromt he phone i really need them
connect to pc and use ovi suite
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520
Maybe you are looking for
-
Unable to print a report- Server Error
I have a java/CR XI (sp3) web application which will display reporters but will not print them. When attempting to print the Crystal report viewer page shows the print dialog page with a choice of printers. When I select a printer and press print. I
-
How can I switch to a different Nib file with a button
Hi there Im working on a Xcode application for IOS and I must admit im kinda new to Objective C. This specific application requires me to switch between different nib files. I am having quite a difficult time trying to figure this out on my own so so
-
HT202157 apple tv is not working
need help my apple tv is not working
-
SAP ECC 6.0 IDES KERNEL Update
Dear experts, i have installed a SAP ECC 6.0 IDES on a Windows Server 2003 Enterprise 64 bits + MS SQL from the MarketPlace: -> http://service.sap.com/swdc -> Download -> Installations and Upgrades -> My Company's Application Components -> SAP ERP ->
-
I don't know if this is the appropriate forum, but I have a problem. I recently inadvertently block a e-mail sender. How can I unblock the sender? This question was solved. View Solution.