Need help: front audio w/ P55-GD55 and thermaltake armor
Hey guys,
I am trying to connect the front panel audio on my thermaltake armor(VA8000BWS) case to my msi p55-gd55 motherboard. My case has 1 wire coming from the front panel with 2 connections on the end that connects to the mobo. The ear mic chart for my case lists as follows:
1-EAR R
2-Return R
3-EAR L
4-Return L
5-MIC IN
6-MIC VCC or MICBIAS
7-Ground
The chart for my motherboard lists as follows:
1-MIC L
2-Ground
3-MIC R
4-PRESENCE#
5-HEAD PHONE R
6-MIC DETECTION
7-SENSE_SEND
8-NO PIN
9-HEAD PHONE L
10-HEAD PHONE DETECTION
Do I simply plug in my cable as is or do I have to move around some of the wires? Any help would be greatly appreciated!
Quote from: XFM on 14-November-13, 07:56:50
That is a pretty old case and front panel audio in it is for AL'97 not the HD audio that the MB has. You need to get a front panel audio module for HD audio from somewhere.
So i can't connect the front panel audio on the MB? It was nice if i could, but no problems then.
Thx for the help
Similar Messages
-
Need help adjusting audio on imported video and/or cpvc to cptx presentation
I inserted a video into my cptx presentation that I created using captivate but the audio was too low. I went back into the cpvc (captivate video demo recording) and increased the volume and republished it and imported it again. However the sound will not increase and is still low. Can someone help me figure out how to increase the volume within the cptx or how to make the cptx recognize the updated volume that was increased? Really running into brick walls on this one...
Appreciate any help that someone can provide.Is it AVCHD, Mini-DV, or DVD? What format does the camera record to?
-
I need help my computer isn't working and there is no was to get on my iTunes and I just updated my phone and now it's stuck on where it shows the plug connected to iTunes help!!!!
There is no other way than to plug into a computer to restore the phone. You can use another computer to do so, but in case you did not back up to iCloud your data and settings will be gone.
Follow this article to connect in recovery mode:
iOS: Unable to update or restore -
Need help my window is in thai and i dont understand at all.how to convert to english?
need help my window is in thai and i dont understand at all.
how to convert to english? i been trying for days but still cannot change it.
because i cannot read thai..please help me step by step..
my pc is touchsmart 9100 windows 7 professional.
Not a single word is in english if i go to 'region and language' to change it.
Everthing is in thai in the system.
This question was solved.
View Solution.Hi,
OK. That means the default display lange of the OS is Thai. That is what was purchased.
You can try downloading and using the language appropriate LIPS (language interface package software) from Microsoft to change the display language.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer -
need help with how to reset bios and admin password to reformat hard drive in 8440p elitebook? removal of cmos, resetting laptop, using cccleaner, windows password recovery and hiren's was noneffective, any help is appreciated. thanks
Hi,
As your notebook is a business class machine, security is more stringent - the password is stored in non-volatile memory and there are no 'backdoor' passwords. Your best option would be to contact HP regarding this.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
I need to have audio out from HDMI and headphone jack simultaneously
I need to have audio out from HDMI and headphone jack simultaneously.
I seem to be able to select one or the other, but not both ? !
ThanksNo. You can only use one sound output:
Why can't I select HDMI audio on my Mac mini?
If you connect an HDMI display or television to a Mac mini (Mid 2010 or later), you might not be able to select the HDMI audio device (in System Preferences > Sound > Output). This can happen if you also have headphones plugged in to the computer. Unplug the headphones to be able to select HDMI audio.
Mac computers: Frequently asked questions about using HDMI -
I have tried everything I know to retrieve the iPhoto Library app. I detest this new Photo app, which obviously wasn't designed with photographers in mind. I desperately need help in retrieving the old app and have not been able to do it so far. I have gone to my app folder and tried to update my iPhoto Library. I have gone to my trash and brought it over to my desktop and still cannot use it. Please help!
Try this fix discovered by User photosb189:
From Finder, hold down the option key on your keyboard and click on the Go menu at the top of the screen
Select Library from the drop down menu
Then navigate to Application Support > iLifeAssetManagement > assets
Right click on the 'sub' folder and choose Compress
Drag the resulting zip file to your Desktop (as a backup)
Go to your System Preferences and choose iCloud
Turn OFF the iCloud Photos option
Go back to Library > Application Support and DELETE the iLifeAssetManagement folder
Now, in System Preferences, turn the iCloud Photos option ON
iPhoto should now be able to launch. Give it enough time to re-download your Photo Stream content. if you are missing any of your My Photo Stream photos (more than 30 days old), unzip the sub folder on your desktop and drag that into iPhoto. -
I Need help. I Change My Number and now imessage don t work.
I Need help. I Change My Number and now imessage don t work.
Hi Ivonka88,
Here are some steps to try troubleshooting your issue with, depending on your specific symptoms:
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
Cheers!
- Ari -
I need help syncing my contacts between Outlook and iPhone using iTunes. I used the knowldge document and set it up to transfer my Outlook contacts to the iphone using itunes.
In contacts on the iphone I only see the email addresses.
Yet in Outlook I have email, snail mail and phone numbers.
I followed the knowledge document from iphone.
I did it once, didn't work so deleted all the contacts from the phone and tried again. Same result. I have a PC using Windows 7 64 bit.You can't access an Exchange account via ActiveSync with the Address Book and iCal on your Mac.
You can access a MM account with Outlook on your PC at work and keep your MM email account server stored mailboxes synced between your PC at work, your iPhone, and the MM "cloud". Not sure about syncing MM contact info and calendar events with Outlook at the same time with an Exchange account.
This will not provide for syncing your Exchange account contact info and calendar events with the Addresss Book and iCal on your Mac because the accounts are separate.
You can access an Exchange account and a MM account at the same time with the iPhone's mail client, and sync contact info and calendar events over the air with both accounts at the same time. You can view combined contact info or separately for each account, and the same for calendar events. -
I need help quick please sold the iPod and before handing it over wanted to clear out info so pushed erase now there is only a plug icon for iTunes but it won't now recognize my computer what can I do??
Try
iOS: Device not recognized in iTunes for Windows
or
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X -
Need help on transportable tablespace, after convert and move datafile over
I need help on transportable tablespace, after convert and move datafile over the target server, How do I plug them in to the ASM instance?
And How do I start the database ? what controlfile I should use?
Thanks.I got error like this:
RMAN> copy datafile '/oracle_backup/stage/ar.269.775942363' to '+RE_DAT';
Starting backup at 29-MAY-12
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 05/29/2012 17:46:21
RMAN-20201: datafile not found in the recovery catalog
RMAN-06010: error while looking up datafile: /oracle_backup/stage/ar.269.775942363
How to deal with this?
I deleted all the current target tablespaces including contents. Do I have to do anything to make the database recognize those converted datafiles? -
Need help trying to use close button and i really like to know why it off
need help trying to use close button and i really like to know why it off
And in English? You need to explain better.
Mylenium -
Need help to Settings Apple iMAC 2012 and HP LaserJet 1100.
Need help to Settings Apple iMAC 2012 and HP LaserJet 1100.
I purchased a imac, 2012, before there was Windows 7. I have the HP LaserJet 1100 and Print Servers Trendnet TE100 P21, with Windows 7 it worked, but with MAC OSX 10.8 does not want to, do not go printing. Could help with the setting?
Нужна помощь в настроке Apple iMAC 2012 и HP LaserJet 1100.
Я купил imac 2012, до этого был Windows 7. У меня есть принтер HP LaserJet 1100 и принтсервер Trendnet TE100 P21, с Windows 7 все работало, но с MAC OSX 10.8 работать не хочет, не идет печать. Могли бы помочь с настройкой?привет Roman,
Mac OS X: About the Reset Printing System feature ...
http://support.apple.com/kb/HT1341?viewlocale=en_US
10.5/10.6/10.7/10.8 instructions...
In System Preferences>Fax & Print, Right click or Control+click on the Printers list Sidebar, choose Reset Printing System.
if you hold option and click the "-" tab it resets the printing system.
http://www.macosxhints.com/article.php?story=20031215144430486
Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
Any devices that previously appeared in your Printer List and Fax List will need to be added again after resetting the printing system.
Resetting the printing system in Mac OS X 10.5.x+++
1. To use the Reset Printing System feature in Mac OS X 10.5.x, follow these steps:
2. Choose System Preferences from the Apple menu.
3. Choose Print & Fax from the View menu.
4. Control-click on list of printers on the left side of the window, then choose "Reset printing system" from the contextual menu. If you don't see a list of printers, Control-click on the text "Click + to add a printer or fax" and select "Reset printing system..." As an alternative, if you currently have one or more printers listed, you can Option-click the "-" (Remove printer) button.
http://support.apple.com/kb/ht1341
Reboot.
Mac OS X: О сброса системы Печать ...
http://support.apple.com/kb/HT1341?viewlocale=en_US
10.5/10.6/10.7/10.8 инструкции ...
В System Preferences> Печать и факс, правой кнопкой мыши или Control + Click на боковой панели списка принтеров, выберите Сброс системы печати.
если вы держите опцию и нажмите кнопку "-" на вкладке он сбрасывает систему печати.
http://www.macosxhints.com/article.php?story=20031215144430486
Безопасная загрузка с HD, (Удержание нажатой клавиши Shift нажатой при загрузке), запустите Disk Utility в Приложения> Утилиты, затем выделите диск, нажмите на ремонт разрешения.
Любые устройства, которые ранее появились в списке принтеров и факсов список необходимо будет добавить снова после перезагрузки системы печати.
Сброс системы печати в Mac OS X 10.5.x + + +
1. Для сброса системы печати в Mac OS X 10.5.x, выполните следующие действия:
2. Выберите Системные настройки в меню Apple.
3. Выбери для печати и факса в меню Вид.
4. Управление кнопкой мыши на список принтеров в левой части окна, затем выберите "Сброс системы печати" из контекстного меню. Если вы не видите списка принтеров, управление кнопкой мыши на текст "Нажмите, чтобы добавить + принтер или факс" и выберите "Сброс системы печати ..." В качестве альтернативы, если у Вас уже есть один или несколько принтеров в списке, можно Option-нажмите кнопку "-" (Удалить принтер) кнопки.
http://support.apple.com/kb/ht1341
Перезагрузку. -
I can't connect to wifi network and bluetooth on iPhone 4S. Need help. Have already rebooted everything and reset network setting
I have the same problem; tried a phone restore, both restoring data and setting up as new phone with factory settings, reset all settings, re-boot, remove apostrophe, put in fridge, you name it!
I think there's quite a few iphone 4s users with the same problem!
I called Apple they said it's a hardware problem, but it has worked for nearly two years; they say go to the Apple store and they can provide a replacement phone for approx. £150!
I've been into the O2 shop where I bought it and they knew the problem exactly; said they had sent a few phones off for repair and had them back awith a report they cannot fix it because it's a software problem!
An assistant in the shop had the same issues; logic says it's a software problem and hopefully Apple will fix it with a patch but at the moment they seem to be avoiding everyones comments!
If anyone else has any ideas these would be appreciated? -
I need help!
I have iPad mini and I can't use App Store.
It always asking my credit card lnformation to download, but the apps I will download are free.
I don't know how it will work again.
Help me please!
Thank you.You need to have a payment method on file. If the apps are free you will not be charged anything. Either enter your credit card information or purchase and enter an iTunes gift card.
Maybe you are looking for
-
Using iCloud with two users on one PC
What is the best way to link my wife and my apple ID on the same computer for icloud?
-
Error while calling the CPI/BAPI
Hi When we are trying to connect to SAP BW Query in crystal reports getting the following error. Database Connector Error : Bapi error#0 Error occured when strating the parser : timeout during allocate/CPIC-CALL : ThSAPCMRCV" we are using SAP BI7.0/S
-
Photo/Edit-In CS6. psd image does not show in LR after save/close.
Whenever I edit (a copy) of an image in Photoshop CS6 from Lightroom 4.3 (Photo/Edit-In), after I save and close the image in CS6 the new psd image does not show in Lightroom. In order to see the image in Lightroom, I need to close Lightroom and then
-
Sales office wise sales orders
Hi, How to find the area or sales office wise sales orders created by users in CRM can anyone give the table name ? i was checked in CRMD_ORDERADM_H i am not getting... Regards MVN
-
Export as .tiff w/ embedded ICC profile support
Hello- I usually hang out in the Color Management forums but thought this would be a better place to ask my question. I am trying to determine what the oldest version of Illustrator supports the Export as .tiff and allow for profiles to be embedded