Need help getting LG TV wifi connection with Airport Express?

I can successfully hook the tv up to the network using the dongle PIN method on the Airport Express. It works fine until I turn the tv off. Then I have to go through the whole setup procedure again. Very frustrating. How can I get the Airport to allow the tv access when I turn the tv back on without having to do the setup again? I did not limit access to 24 hours. Not sure what I am missing. Thanks in advance for any and all help.

The dongle is the little usb device that makes the tv wifi capable, it is assigned a unique PIN that I input into the airport express utility so my wireless network will allow it access. All that works fine, but I have to redo the whole setup everytime I turn the tv off. Have you any experience with this and can offer a hint on how to allow the tv access each time I turn it on?

Similar Messages

  • Sudden slow wifi connection with Airport Express 802.11n

    Recently, all of a sudden I noticed the speed of my internet droped dramaticlly from ~27Mbps to ~4Mbps (Speedtest.com) Comcast's blast. When I connect my laptop directly to the modem there is no problem with the speed. I tried restarting the modem, changing the channel/radio mode on the airport express, hard reset the airport epress, change the location of the airport express but nothing has changed. I notice that the speed fluctuate on speedtest.com meaning it ranges from 1-3 to 5-7Mbps. I test the speed on three other laptops but still got the same result. The only change I can think of that could effect this is the addetion of two computers to the network but I would still get the same speed when they are powered off.
    Thanks

    willcyrier wrote:
    Do I have to change anything on my computers?
    you use +airport utility+ (AU) (in your applications > utilities folder). launch AU, double-click on the icon of your extreme to enter manual setup, and go to the wireless tab. see this screen shot
    however, before you do, i recommend you download iStumbler (does not work with Snow Leopard) or AirRadar (it has a trial period) and note the channels other networks in your vicinity are broadcasting on. change the channel of your network as far away as possible from those.
    good luck !

  • Lose wifi connection with airport express

    Everytime I turn on the computer, there is no wifi connection.  The symbol is still at the top of the screen, but is gray rather than black.  I can click on it and it gives me the choice of my network or a neighbor's.  All I have to do is click on mine and it connects.  This is a real pain.  Anything I can do

    In System Preferences > Network and create a new network location.
    Test by restarting the iMac.
    In System Preferences > Network > Wifi > Advanced remove your network from preferred networks.
    Open Keychain Access under System remove your network.
    Copy /Library/Preferences/SystemConfiguration folder to your desktop as a backup. Then trash the main SystemConfiguration folder and restart the mac.
    The above steps basically make the iMac's network settings default.
    Join your network and remember in keychain, if prompted.
    Do a restart and hopefully the iMac will automatically join your network.

  • Ipad toggling wifi connection with airport express

    my iPad when it is in sleepmode loses the wifi connection... when waking it, it restores, but sometimes wifi signal keeps flickering on/off...
    on Macbook pro no problems...
    thanks,
    Stef

    1. Turn router off for 30 seconds and on again
    2. Settings>General>Reset>Reset Network Settings

  • Lost wifi connection with Airport Extreme.

    Lost wifi connection with Airport Extreme.   When I connect my modem directly to the computer I can access the internet, however as of this morning I am no longer able to access the internet via wifi on my airport extreme.  I have been using  airport extreme for 6 months or more and everything has been working fine.
    When I diconnect my  airport extreme and reconnect it I get wifi for 1-2 minutes working fine, but then i lose internet connection.  According to airport Utility everything is setup and connected and working ok, but I still am not able to access any webpages over wifi. 

    I have the same issue, I'm getting droppeds from wireless constantly

  • My two iMacs frequently go offline when I have our iPad and two iPhones-5 connected with Airport Express (2nd edition). If I disable WiFi on my three "i" devices no problem. Any thoughts on this?

    My two iMacs frequently go offline when I have my iPad and two iPhones-5 connected with Airport Express (2nd edition). If I disable WiFi on my three "i" devices the offline problem stops. Any thoughts on this?

    .....doesn't that seems to suggest the modem?
    That is what I have suggested....twice now. From posts above:
    My opinion would be that it is likely not the ISP, unless you have complete loss of Internet service for all devices at the same time......it is the Comtrend device....
    and
    I believe that the problem lies with the modem, and not the ISP signal.
    Your ISP will likely have a different opinion, though. Please keep us posted on your progress.

  • Trekstor pocketair wifi storage connecting with airport express

    Hey there!
    Is is possible connecting a Trekstor wifi Storage with airport express? I wanna use Itunes and this storage for streaming music with mit mac pro book (OS X 10.9.3)
    Or is it nessaray to use a apple wifi storage like airport extreme?
    Thanks!
    Best regards
    Michael

    Is is possible connecting a Trekstor wifi Storage with airport express?
    In theory, the Trekstor should be able to connect to an existing network either via a wired (Ethernet) or wireless (Wi-Fi) connection. The AirPort Express, depending on the model, can supply both.
    On the other hand, the Express DOES NOT support hard drives connected to its USB port; whereas, the Extreme and Time Capsule base stations do.

  • Can I create a home network withous dsl connection with airport express

    can I create a home network without dsl connection with airport express?
    So it means I can't connect to my HP Airprint/Wireless printer without exretnal connection through ISP?? Just need to print from my Mac and iphone. I have Vodafone Prepaid connection, which is directly connected to my Mac. Does that make an internal network possible?

    You have to set up the Air Port with an internet connection to set up a network. Do you have a modem? If yes you can set up the network. 

  • I have an Airport Express connected via optical toslink to a dac/amp in turn connected to speakers. When using iTunes I get message "no speakers connected to Airport Express" and audio sound has drop outs.

    I have an Airport Express connected via optical toslink to a dac/amp in turn connected to speakers. When using iTunes I get message "no speakers connected to Airport Express" and audio sound has drop outs.

    Ok, if you are connecting the AirPort Express Base Station (AX) to the existing wireless network, then the DSL in the next room is most likely a combination DSL modem and wireless router. Thanks for clarifying that for me.
    Although they may only be separated by a single wall, the building material used in that wall may be enough to prevent the AX from receving a "good" signal from the DSL router.
    Since I don't know what computing equipment you have available, please check out this AirPort User Tip: AirPort - Optimal Base Station Placement to see if you can get some SNR measurements at the location of your AX. To do this properly, you will want to power-off the AX and only get these measurements for the DSL router.

  • IMac losing wiffi connection with airport express when sleeping. I can't wake the iMac with the remote app on the iPhone. What is wrong?

    iMac losing wiffi connection with airport express when sleeping. I can't wake the iMac with the remote app on the iPhone. when i open airportconfiguration on the iphone is see that the imac isn't connected anymore. Normaly the airport express wake up the iMac but it doens't. What is wrong?

    anyone knows a reason for the item above?

  • IPad and iPhone 4 and new 5s drop connection with airport express. This just started recently after working fine for a year. PC does not drop. Wifi signal fine. Help?

    Streaming music with airport express and Apple TV to 2 different systems. No problem with Apple TV. iPad and iPhone 4 and new 5s keep dropping their connection to airport express. Airport express connection to wifi appears to be fine. No dropping by windows PC. This just started recently after working fine for a year. Help?

    What does any of this have to do with the Apple TV?

  • I need help getting my facetime to connect

    I need help getting my iphone 4 to connect to facetime.  It will dial, then say connecting, the just hangs up

    Judging by all the posts on the forum, there seems to be an issue at Apple's end, although they have made no announcement on their status page. Some users have reported that Apple is aware of the issue. Sadly, we have to wait for Apple to provide some sort of update/fix. You can leave feedback for Apple at the link below.
    http://www.apple.com/feedback/

  • Can't get my printer to work with Airport Express

    I got a new MacBook today, everything is up and running, so is my Airport express with my DSL line, but my printer is not responding to the connection. I plugged in the USB port from the printer to the Airport and the printer and it doesn't work. I restarted things, went to troubleshooting... nothing helped. It's not the printer because if I plug in the printer USB port directly to my MacBook it works. Anyone have any advice? Thank you!

    The directiions on your site are for the Printer Setup Utility that was part of OS X 10.3 Panther. There is no optoin for "IP Printing" in the Tiger Printer Setup Utility, so I don't get how everyone was able to follow the intructions successfully. I sure can't. Is it enough to just add the printer normally using the default browser (as a Bonjour printer) and selecting the aformentioned GIMP driver manually? If not, I need help getting instructions that pertain to Tiger IP Printing. Thanks.
    Use the process outlined here:
    HP Printers (and others) not on compatibility list
    and Airport Extreme Printing
    http://www.ifelix.co.uk/tech/1300.html
    Using the G
    imp-Print drivers for the PhotoSmart P1100.
    Relevant Thread
    http://discussions.apple.com/message.jspa?messageID=26
    14748#2614748
    MacBook   Mac OS X (10.4.7)   HP PhotoSmart c3180. WDS w/ AirPort Express & Extreme
    2.0 GHz MacBook   Mac OS X (10.4.7)   HP PhotoSmart c3180. WDS w/ AirPort Express & Extreme

  • How make wireless connection with airport express to  Yamaha Clavinova CVP-403 ?

    I would like to wirelessly connect my Yamaha Clavinova CVP-403. I would like to use a D-link DWA 125 and my airport express. Does anyone has any experience on how to do that?

    Hi Henry - you seem to be a very helpful and knowledgeable person and I am wanting to dive in to the depths of wireless working at home and could probably do with your advice. I certainly don’t have as much knowledge as Jaybee and if he’s had problems I am feeling a little apprehensive.
    I know that the first thing I need to do is get an ethernet modem to use with Airport Express as I currently only have a USB modem. I was wondering if you have any recommendations or if I should go straight for the Netgear DSL modem/router (DG834B) that Jaybee ended up with. Although the bit about ‘disabling the Airport Express resp. Extreme routers’ scares me rigid
    I have looked at ‘About this Mac’ and got the following for you – hope it’s helpful.
    OSX 10.3.9
    1.33 HGz PowerPC G4 processor
    Airport Extreme: Worldwide
    Firmware: 400.17(3.90.34.0.p11)
    Airport admin utility: 4.2 (v420.31)
    My ISP is also Tiscali (UK) - they have said they can only provide modem support on the USB modem they provide so once I switch to an ethernet modem I’ll be on my own. I have checked the Tiscali website and found the following modems, so I would assume (probably unwisely) that they would be compatible with my account...
    Zoom X6 5590 DSL Modem (55907200) 
    D-Link DSL-300T 
    Zoom Hayes ADSL Ethernet (H0-15805) (081580572) 
    Any help is very gratefully received.
    Regards,
    ... LIZ ...

  • We have a Lexmark Pinnacle Pro901 and cannot get the printer to work with airport express - any suggestions?

    Can anyone give us suggestions on how to get our Lexmark Pinnacle Pro 901 to work with airport express? We cannot get airport express to recognize the printer.

    Refresh all your devices before reconfiguring printer to connect to your computer.
    a Shutdown computer
    b Pull out printer power cord from the socket. Let it stay for at least 30 seconds then plug it back.
    c Powercycle your router (unplug your router for at least 30 then plug it back. This will not change the settings of the router. This will just refresh the device)
    d Once router is ready , put back brick at the back of the printer to turn it on
    e Wait one minute
    f Turn on computer
    Repair your disk permission: http://bit.ly/OeD7U3
    Run Cleanup tool http://bit.ly/vnukXY
    Download updated driver from Lexmark website http://bit.ly/ToA1fo
    Run firmware update http://bit.ly/AcNqbg

Maybe you are looking for

  • How to Sync two calendars in iCal

    OK, here is my problem. I can access two calendars with iCal (one is on Google Calendar and the other one is on a Microsoft Exchange 2007 server) how can I synchronize them the best? I want to keep both in their original place, but I also want things

  • Limited records displayed in a view

    Hello, I'm trying to see the table contents of a view in DB connect. It only returns back 20 records. Is there any way to change it to show all the records that are present in the view. I'm trying to figure out some missing data in my ODS and CUBE. W

  • Problem in changing Billing Block for sale order.

    I need to change the Billing block of the particular sale order ,I am using BAPI_SALESORDER_CHANGE and populating sale order and billing block in the respective structure .The billing block is not getting changed. Thanks Ravi

  • Urgent Help need - How to capture client change event

    Dear Gurus, I am not able to track whether user has changed any field in the table or not. I am using IWDNodeElement.isChangedByClient  to capture , but it is always returning me false. PLEASE HELP. Sample code wdContext.nodeTravelTable().moveFirst()

  • Start Counter Output on a Analog Trigger in the PCI 6259 Mseries board

    Hi, My question is regarding how to use Analog Triggering to start a counter in the PCI 6259 M-series board. I have attatched a program here 'Mult_Device_Digital_Analog_Out_on_Analog_Trigger.​vi' and I'll explain my problem regarding this program. I'