Need help getting speaker inputs to work please.

I'm trying to have my auido reciever and computer speakers hooked up to my computer at the same time so when I watch recorded shows off my computer i can have the sound come out of my surrouns sound speakers. The only problem is i don't have an input option under my volume controls but there are many inputs in back of my computer. Do I need a different driver or different program to control it's I don't have an expensive sound card just inputs that are kind of clustered together. If someone actually felt like reading all of this and can help me it would be greatly appreciated. THANKS

So you are trying to connect both your computer speakers and your receiver to the sound card at the same time? Are teh computer speakers running through the receiver, or are they two separate deals?
You won't be able to connect the receiver and speaker at once and get surround from the receiver. You can, however, change the "speaker setup" in the cards included software to "4 speakers", or "quattro" setup. Then plug in the receiver to the first output of the sound card and the speakers into the next output. This won't give you any surround sound, however.
What sound card do you have?

Similar Messages

  • I need help getting my printer to work

    I need help getting my printer to work

    http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/Want-Good-Answers-Ask-Good-Questions/td...
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • I need help getting this program to work.

    K. I don't pay much attention in my AP Comp Science Class.. but my teacher said if i can get this program to work i get an a for the semester... The program is Metrowerks Codewarrior IDE.. we are running it on windows 98 i think. She said she can't get it to compile.. so i guess it just needs to be able to input simple java programs (i.e. loops, just the regular crap) and compile them and run them...i have no clue what is wrong with it.. it could just need a patch...or we may just be going about it the wrong way...any help would be SUPER appreciated...

    K. I don't pay much attention in my AP Comp Science
    Class.. but my teacher said if i can get this programYou better did.
    to work i get an a for the semester... The program is
    Metrowerks Codewarrior IDE.. we are running it on
    windows 98 i think. She said she can't get it toAtleast be sure of the OS.
    compile.. so i guess it just needs to be able to
    input simple java programs (i.e. loops, just the
    regular crap) and compile them and run them...i have
    no clue what is wrong with it.. it could just need aEven we don't.
    patch...or we may just be going about it the wrong
    way...any help would be SUPER appreciated...Nothing in your thread really speaks of the problem. And since you mentioned homework, there's hardly anyone to be interested in that.
    Regards
    ***Annie***

  • I need help getting Mini Bridge to work in PS CS6

    I have already tried deleting the folder and rebooting the computer, I have tried creating a new user account, I have tried uninstalling and reinstalling the entire package and I cannot get Mini Bridge to work at all. It just keeps going to "Mini Bridge waiting for Bridge CS6..." and then never finds anything. I am having this issue on both my Macbook Pro Retina 15 and my MacBook Pro 13 (Early 2011 model). I cannot seem to find any other solutions to this problem online. I also made sure that both Macbooks are fully updated as well as all CS6 software titles. Please help me fix this!
    I also made sure I added it to the exceptions list in the firewall too.

    Moving the discussion to PS forum
    You can also follow the solution suggested in http://helpx.adobe.com/photoshop/kb/error-waiting-for-bridge-cs5.html
    they may help

  • Need help getting this code to work

    I am trying to get this code to work using "if else statment" but it will only do the first part and not do the second part in the else statement. Can anyone help me out? Here is the code:
    var R1 = this.getField("Registration Fees1");
    var R2 = this.getField("Registration Fees2");
    var R3 = this.getField("Registration Fees3");
    var R4 = this.getField("Registration Fees4");
    var R0 = 0
    if (R0 == 0)
      event.value = Math.floor(R1.value);
    else
      event.value = Math.floor(R2.value + R3.value + R4.value);
    I did notice that if I fiddled around this this part:
    if (R0 == 0)
    sometimes I can get the second part to work but not the first. I need it to do either or and this is getting frustrating.
    I might also not even need "var R0 = 0". I put that there for the condition part. If that is what is causing the problem, I can take it out. But then what would the condition be? For this form, the default is 0 and then the calculation follows by user clicking on different prices. The first part is if they want to pay for the full conference and the second part is if they want to pay for either Monday, Tuesday or Wednesday or 2 of the 3 days. Is it possible to get this to work with both parts together? I am still stuck on getting just one or the other working. Any help would be greatly appreciated. Thanks in advance.

    I have posted this on another message board and a user by the name of gkaiseril offered this solution but it hasn't worked either.
    // all four days
    var R1 = this.getField("Registration Fees1").value;
    // Monday
    var R2 = this.getField("Registration Fees2").value;
    // Tuesday
    var R3 = this.getField("Registration Fees3").value;
    // Wednesday
    var R4 = this.getField("Registration Fees4").value;
    var Fee = 0
    event.value = ''; // default value
    if (R1 != 'Off') {
      Fee = Number(R1) + Fee;
    } else {
      if(R2 != 'Off') {
         Fee = Number(Fee) + R2;
      if(R3 != 'Off') {
         Fee += Number(R3);
      if(R4 != 'Off') {
         Fee = Number(R4) + Fee;
    event.value = Fee;

  • Need help getting 'move tool' to work in CS5

    I cannot move an item just pasted into an image and on its own layer, by using the move tool. The move tool has become a hand and moves everything including the unselected layer below as well as the item on the layer above that I wanted to move independently of the layer below. Selecting 'transform' does not allow independent moving either, nor does it allow me to transform or change the size of the newly pasted object.
    I'm told that 'I'm useing the wrong shortcut.' I'm not sure what that means.
    I'm new to CS5 coming from CS3 where the tool at the top of the tools is the move tool and using the spacebar turns it into the hand tool. Right now, the move tool remains the hand tool without using the spacebar. It seems to be locked.
    Can anyone help me straighten this out?
    TIA,
    Ken

    c.pfaffenbichler wrote:
    How To Get Help Quickly!
    Boilerplate-text:
    Are Photoshop and OS fully updated?
    As with all unexplainable Photoshop-problems you might try trashing the prefs (after making sure all customized presets like Actions, Patterns, Brushes etc. have been saved and making a note of the Preferences you’ve changed) by pressing command-alt-shift on starting the program or starting from a new user-account.
    System Maintenance (repairing permissions, purging PRAM, running cron-scripts, cleaning caches, etc.) might also be beneficial, Onyx has been recommended for such tasks.
    http://www.apple.com/downloads/macosx/system_disk_utilities/onyx.html
    Weeding out bad fonts never seems to be a bad idea, either. (Validate your fonts in Font Book and remove the bad ones.)
    If 3rd party plug-ins are installed try disabling them to verify if one of those may be responsible for the problem.
    I've done all of the above except that instead of Onyx I use Cocktail. If I need to switch from Cocktail to Onyx please advise.
    The behavior with the hand tool still persists. I am forced to go back to Photoshop CS3 at this point but will check back here for possible other answers, or maybe a future update or upgrade will fix the problem. It's hightly unusual for me to have any problems with Photoshop as I've been using it since the mid-1980's up to now with no problems.
    Patience will win out.
    Thanks to all,
    Ken

  • Need help getting guest access to work.

    I have searched and Googled and found very little about enabling temporary guest access on an AEBS.
    What I could find said just type in "the PIN number." OK, what PIN number? It appears that the device seeking access is supposed to supply it somehow and then I type it in while using the Airport Utility. I see no such number on the device. I also tried the "first one to try" method and got nowhere.
    In both cases I was using an iPhone that wanted to use my network. Does this work with iPhones?
    Many thanks,
    -dan

    This thread http://discussions.apple.com/thread.jspa?messageID=4088108&#4088108 looked helpful but I can't get guest access to work for my son's guest using a Dell XP laptop (using Dell wireless management) despite allowing timed access. Neither the PIN nor the first attempt option allowed him on the network without giving him our password.
    It's still not clear if or when this will work. At the very least, the documentation is terrible.

  • Need help getting LCD monitor to work with G4 GeForce4 MX

    I have a G4 that I haven't been using and want to get running again. It has a Nvidia GeForce4 MX video card. I had a huge CRT monitor and want to use a ViewSonic VX1935wm which I got a deal on. When I hook the monitor up it says that the resolution is out of range.
    I can boot with my old monitor and change the connection and then get the LCD to work but only at certain resolutions.
    Do I need to get a new video card, or can I get an adaptor? What kind of card should I get if it needs to be replaced? Or what other kind of monitor would be supported by this video card?
    Here is the webpage for this monitor: http://www.viewsonic.com/products/lcddisplays/xseries/vx1935wm/

    thanks for the links.
    switchResX does something, but it doesn't solve the problem. i can now switch to the "optimum" resolution of 1440x900, 60hz. but when i restart the computer, it still won't work! i continue to get the "out of range" message and have to boot with my crt and then switch cables to do anything. also, the fonts in the finder menus look terrible, you can see the jagged lines.
    displayConfigX won't let me test that high of a resolution without registering the product.. needless to say, i don't want to pay money if the results are going to be the same as with SwitchResX.
    I sent an e-mail to ViewSonic support. Is it typical to have these problems? I am getting more and more confused as I learn more about this.

  • Need help getting Apple Extreme to work with Be box

    Anyone able to give an idiots guide to getting Apple Extreme to work with Be Box wireless modem?
    Used to have Orange (Wanadoo) broadband with Livebox wireless router, which i had my AE wired up to and it worked fine. Signed up with Be* and managed to get their wireless router working and communicating with my Mac OK. When i hooked up AE the green light came on but i can't manage to get my Mac to find it.
    Any help would be very appreciated.
    Thanks.

    Hello Orang Hutan. Welcome to the Apple Discussions!
    What is your connectivity goal for the 802.11n AirPort Extreme Base Station (AEBSn)?
    o Connect it directly to the Be Box wireless router via Ethernet, or
    o Connect it wirelessly to the Be Box's wireless network?
    If it is to go the wireless route, do you want the AEBSn to extend the wireless range of the Be Box?

  • Need help getting filezilla ftp to work with a windows server

    Trying to connect to a windows based server through FTP, I've downloaded Filezilla when I launch it takes several minutes to ask me for a address and username... I input but nothing happens. I would like to use MAC ftp option but I'm not sure it works upstream like I want it to...
    Please Help.
    J.
    Message was edited by: MindBlendMedia

    This doesn't appear to have anything to do with Apple Remote Desktop, Apple's application for managing networked Macs, so this probably isn't the most appropriate forum for this question. I'd suggest you ask in the Mac OS X 10.4 Networking forum; you'll be more likely to get a quick and accurate answer there.
    Regards.

  • I need help getting my Intuos5 to work with Flash CS6

    Can someone give me some help with this? I can't find a single thing on Google that helps me.
    I installed Adobe Flash CS6 recently and I have been using my Intuos5 Large for a long time now with Photoshop CS6. The thing is, with Photoshop, it took forever to get working properly. It turned out that I needed to use the 64-bit version because my 64-bit system and tablet drivers won't work with 32-bit Photoshop.
    Concerning Flash, it's the same problems as Photoshop. It refuses to recognize my tablets functions such as pressure and tilt sensitivity. It also has an annoying lag or lack of response if I do small, quick strokes. I would switch Flash to 64-bit mode, but there isn't one. I can't find the little stroke-like icon in Flash to turn on sensitivity either. I'm really confused. I've tried it with Flash CS5.5 and it's the same thing.
    That's my issue, and I have tried restarting the software and rebooting many times as well. There doesn't seem to be much for options. This all leads to it probably being a 64-bit and 32-bit compatability issue
    I'm running Windows 7 with more than enough power to maintain Flash CS6. It is possible that I may need to update my tablet driver since I did for Photoshop CS6, but it was a pain in the *** getting Photoshop to work until I used 64-bit mode. I may need additional files to mod the software.
    I would really appreciate the help so I can begin to learn animation. It's my passion. Thanks, in advance.
    Here are my relevant specs:
    System Information
    Time of this report: 9/4/2012, 01:32:48
           Machine name: LAPPY_TOPPY
       Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.120503-2030)
               Language: English (Regional Setting: English)
    System Manufacturer: TOSHIBA
           System Model: Satellite L675
                   BIOS: Phoenix SecureCore Version 2.30
              Processor: Intel(R) Core(TM) i5 CPU       M 450  @ 2.40GHz (4 CPUs), ~2.4GHz
                 Memory: 4096MB RAM
    Available OS Memory: 3954MB RAM
              Page File: 2016MB used, 5890MB available
            Windows Dir: C:\windows
        DirectX Version: DirectX 11
    DX Setup Parameters: Not found
       User DPI Setting: Using System DPI
    System DPI Setting: 96 DPI (100 percent)
        DWM DPI Scaling: Disabled
         DxDiag Version: 6.01.7601.17514 64bit Unicode
    Display Devices
              Card name: ATI Mobility Radeon HD 5650
           Manufacturer: ATI Technologies Inc.
              Chip type: ATI display adapter (0x68C1)
               DAC type: Internal DAC(400MHz)
             Device Key: Enum\PCI\VEN_1002&DEV_68C1&SUBSYS_FD001179&REV_00
         Display Memory: 2735 MB
       Dedicated Memory: 1014 MB
          Shared Memory: 1721 MB
           Current Mode: 1600 x 900 (32 bit) (60Hz)
           Monitor Name: Generic PnP Monitor
          Monitor Model: unknown
             Monitor Id: LGD01CA
            Native Mode: 1600 x 900(p) (60.080Hz)
            Output Type: Internal

    If you are moving from an existing Mac to a new Mac the easiest thing to do is connect the two Macs via a Firewire cable and run the Migration assistant. If you are moving files from a Windows platform or you don't want to use the Migration assistant review this article.
    http://docs.info.apple.com/article.html?artnum=300173

  • Need help getting mimeopen -d to work [SOLVED]

    I'm trying to set default applications on a relatively fresh install of Arch.  I know in the past I've been able to just to do something like mimeopen -d file.pdf okular and it has worked, but now I get the following error message
    [ryantr@myhost Downloads]$ mimeopen -d file.pdf okular
    No applications found for mimetype: application/pdf
    [ryantr@myhost Downloads]$ mimeopen -d file.pdf
    No applications found for mimetype: application/pdf
    My guess is that there is a database somewhere that needs updating.  I tried running update-desktop-database but no help.  I know in the past I haven't had to manually edit files for something as common as a pdf.
    What am I missing?  FYI, my DE is Fluxbox.
    Last edited by ryan0270 (2010-12-15 05:23:14)

    Ok, I finally got frustrated enough to look at this again and have it working, although I'm not sure what exactly made it work  Here are the steps I did:
    Looking at the verbose output of update-desktop-database seemed to indicated a directory problem.  The last line says a directory did not exist so I created that...
    [root@user]# update-desktop-database --verbose
    Search path is now: [/usr/share/applications, /usr/local/share/applications]
    File "/usr/share/applications/policytool.desktop" lacks MimeType key
    File "/usr/share/applications/qtconfig.desktop" lacks MimeType key
    File "/usr/share/applications/kde4/Help.desktop" lacks MimeType key
    File "/usr/share/applications/kde4/knetattach.desktop" lacks MimeType key
    File "/usr/share/applications/bssh.desktop" lacks MimeType key
    File "/usr/share/applications/avahi-discover.desktop" lacks MimeType key
    File "/usr/share/applications/dropbox.desktop" lacks MimeType key
    File "/usr/share/applications/jconsole.desktop" lacks MimeType key
    File "/usr/share/applications/bvnc.desktop" lacks MimeType key
    File "/usr/share/applications/pidgin.desktop" lacks MimeType key
    File "/usr/share/applications/assistant.desktop" lacks MimeType key
    Could not create cache file in "/usr/local/share/applications": Error opening directory '/usr/local/share/applications': No such file or directory
    Running update-desktop-database again got rid of the last error message but didn't fix the problem so I manually copied all the Okular related .desktop files from /usr/share/applications/kde4 to /usr/share/applications.  This seemed to fix the problem, although I'm not sure why since the above error message showed problems with other .desktop files inside the kde4 directory so I'm assuming it was scanning correctly.
    But it works now, for whatever reason.

  • Need help getting Main method to work...

    Hello everyone, I have a problem, I have a GUI that I need to run (it compiles fine, but will not run.) I am very new to Java and programing in general so go easy on me. I think I am just missing something simple here. I am going to post the basic code and see if you all can help...the issue is in written in red to help you identify my problem...
    public class LagersGUI extends JFrame implements ActionListener,Serializable
    {color:#0000ff}private {color}JTextArea {color:#339966}textArea{color};
    {color:#0000ff}private {color}JButton {color:#339966}start,
    next,
    previous,
    last;{color}
    JLabel {color:#339966}imageLabel{color};
    {color:#0000ff}private static{color} LagersAddInfo {color:#339966}inv{color} = {color:#0000ff}new {color}LagersAddInfo();
    {color:#808080} /**
    * @param arg0
    * @throws HeadlessException
    */{color}
    {color:#0000ff}public {color}LagersGUI( String arg0 ) {color:#0000ff}throws {color}HeadlessException
    {color:#0000ff}super{color}( {color:#ff9900}"Inventory GUI" {color});
    {color:#339966}textArea{color} = {color:#0000ff}new {color}JTextArea( 800,800 );
    JScrollPane scrollPane = new JScrollPane( {color:#339966}textArea{color} );
    textArea.setEditable( {color:#0000ff}false {color});
    scrollPane.setVerticalScrollBarPolicy( JScrollPane.VERTICAL_SCROLLBAR_ALWAYS );
    scrollPane.setPreferredSize( new Dimension( 600, 100 ) );
    JPanel cp = new JPanel();
    cp.setSize( 400, 100 );
    cp.setLayout( new BorderLayout() );
    cp.add( scrollPane,BorderLayout.{color:#339966}CENTER{color} );
    JPanel buttonPanel = new JPanel();
    JPanel buttonPanel1 = new JPanel();
    {color:#339966}start{color} = new JButton( {color:#ff9900}"Start"{color} );
    {color:#339966}start{color}.addActionListener( {color:#0000ff}this {color});
    {color:#339966} next{color} = new JButton( {color:#ff9900}"Next" {color});
    {color:#339966} next{color}.addActionListener( {color:#0000ff}this {color});
    {color:#339966}previous{color} = new JButton( {color:#ff9900}"Previous"{color} );
    {color:#339966} previous{color}.addActionListener( {color:#0000ff}this {color});
    {color:#339966} last{color} = new JButton({color:#ff9900} "Last"{color} );
    {color:#339966} last{color}.addActionListener( {color:#0000ff}this {color});
    buttonPanel.add( {color:#339966}start {color});
    buttonPanel.add( {color:#339966}next {color});
    buttonPanel.add( {color:#339966}previous {color});
    buttonPanel.add( {color:#339966}last {color});
    cp.add( buttonPanel,BorderLayout.{color:#339966}SOUTH {color});
    cp.add( buttonPanel1,BorderLayout.{color:#339966}NORTH {color});{color:#999999}///NewInventory_Test/logo.gif{color}
    java.net.URL u = {color:#0000ff}this{color}.getClass().getClassLoader().getResource({color:#ff9900}"\\NewInventory_Test\\logo.gif"{color});
    ImageIcon icon = {color:#0000ff}new {color}ImageIcon(u);
    {color:#339966}imageLabel{color} = new JLabel( {color:#ff9900}"Inventory View"{color}, icon, JLabel.{color:#339966}CENTER {color});
    cp.add({color:#339966} imageLabel{color},BorderLayout.{color:#339966}WEST{color} );
    {color:#0000ff}this{color}.setContentPane( cp );
    {color:#0000ff}this{color}.setContentPane( cp );
    {color:#0000ff}this{color}.setTitle( "Inventory Program IT 215" );
    {color:#0000ff}this{color}.setDefaultCloseOperation( JFrame.{color:#339966}EXIT_ON_CLOSE{color} );
    {color:#0000ff} this{color}.{color:#339966}textArea{color}.setText({color:#339966}inv{color}.getStart());
    {color:#0000ff} this{color}.setSize(200, 200);
    {color:#0000ff}this{color}.pack();
    {color:#0000ff}this{color}.setVisible( {color:#0000ff}true {color});
    @Override
    {color:#0000ff}public void{color} actionPerformed( ActionEvent e )
    // TODO Auto-generated method stub
    {color:#0000ff} if {color}( e.getActionCommand().equals({color:#ff9900} "Start"{color} ) )
    textArea.setText( {color:#339966}inv{color}.getStart() );
    {color:#0000ff}if {color}( e.getActionCommand().equals( {color:#ff9900}"Next" {color}) )
    textArea.setText({color:#339966}inv{color}.getNext());
    {color:#0000ff}if{color} ( e.getActionCommand().equals( {color:#ff9900}"Previous" {color}) )
    textArea.setText( {color:#339966}inv{color}.getPrevious() );
    {color:#0000ff} if{color} ( e.getActionCommand().equals( {color:#ff9900}"Last"{color} ) )
    textArea.setText({color:#339966}inv{color}.getLast());
    {color:#0000ff}public static {color}LagersAddInfo getInv()
    {color:#0000ff}return{color:#339966} {color}{color}{color:#339966}inv{color};
    {color:#0000ff}public static void{color} setInv( LagersAddInfo inv )
    LagersGUI.{color:#339966}inv {color}= inv;
    {color:#808080} /**
    * @param args
    */{color}
    {color:#0000ff}public static void {color}main( String[] args )
    LagersGUI {color:#ff0000}_inventory_ {color}= {color:#0000ff}new {color}LagersGUI( {color:#ff9900}"Inventory"{color} );{color:#ff0000}//** here's the part I'm having trouble with...inventory is an * unused variable. What other way could I get {color:#000000}main{color} */ method to work?{color}
    }

    This forum can format your code for you and make it easier to read. Simply click the CODE button and two tags will appear. Then paste your code in between the tags. Important, copy code form your source not first post.                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • Need help getting my EVDO to work again - lost without it!!

    My BB no longer picks up the EVDO or 1X signal. All I have now is 1x. This started to happen when I returned to Canada from a vacation in Jamaica. For this reason I have a feeling that the problem may be software related and not a hardware problem. My intentions are to wipe the phone and reinstall the OS (and any other applicable software - although I don't know what all would be required). I am not sure where to find the OS files and was wondering if anyone can help guid me through this.
    Thanks for any help!!!
    Message Edited by Benjo_1 on 01-20-2009 12:50 PM

    wait !
    home screen >> options >> advanced options >> Host Routing Table
    open the menu then do "register now".
    exit, wait for the arrows to finish blinking.
    then do a reboot : the soft reboot, and if it does not work, the hard reboot. Don't worry, you can't lose data with these two reboots.
    Soft reboot :
    1) Hit the three following keys at the same time :
    - Alt
    - Left Shift
    - Delete
    2) wait 2 minutes for the Blackberry to wake up.
    Hard reboot :
    1) your Blackberry device is on
    2) remove the battery and wait for a minute
    3) Put the battery back
    4) wait 5 minutes for the device to wake up.
    Please tell us if it works for you.
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • Need help getting my applets to work on web pages!

    I've been trying to get it to work for a while now, and I no idea why it won't work! I've tried all kinds of things to get it to work, but it still won't work. All I want to do is make a simple applet, don't care what it does, and put it on a web page.
    Here is my HTML code:
    <applet code=?Slime2P.class? height=?300? width=?400? codebase=?http://www.spinarcade.com/tests?>
    </APPLET>
    Here is a link to what happens:
    [http://www.spinarcade.com/tests/duk.html|http://www.spinarcade.com/tests/duk.html]
    Here is the errors:
    load: class ?Slime2P.class? not found.
    java.lang.ClassNotFoundException: ?Slime2P.class?
         at sun.applet.AppletClassLoader.findClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at sun.applet.AppletClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at sun.applet.AppletClassLoader.loadCode(Unknown Source)
         at sun.applet.AppletPanel.createApplet(Unknown Source)
         at sun.plugin.AppletViewer.createApplet(Unknown Source)
         at sun.applet.AppletPanel.runLoader(Unknown Source)
         at sun.applet.AppletPanel.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    It works fine when I run the applet in eclipse, and I've tried many different applets. I tried using a cool program I wanted to put online first, then I made a simple program to try, and then I even downloaded the file from a tutorial and didn't edit it at all... nothing works!
    Here's code from one of the applets (Simple applet with green lines):
    import java.applet.*;
    import java.awt.*;
    public class Duck extends Applet {
    int width, height;
    public void init() {
    width = getSize().width;
    height = getSize().height;
    setBackground( Color.black );
    public void paint( Graphics g ) {
    g.setColor( Color.green );
    for ( int i = 0; i < 10; ++i ) {
    g.drawLine( width, height, i * width / 10, 0 );
    I have all the .class file and the html page in the same place (http://www.spinarcade.com/tests).
    Thank you for your help! It is most likely something simple...
    Edited by: Donv7 on Jul 17, 2008 2:27 PM

    Here is your html:
    <HTML>
    <HEAD>
    <TITLE>Duk!</TITLE>
    </HEAD>
    <body bgcolor="#DAE9F3">
    <center>
    <applet code=?Slime2P.class? height=?300? width=?400?>
    </APPLET>
    ducks these dayz...<br>
    codebase=?http://www.spinarcade.com/tests?<br>
    C:\Documents and Settings\Don\Desktop<br>
    http://www.spinarcade.com/tests<br>
    </center>
    </BODY>
    </HTML>Look carefully at the double quotes surrounding the red text (bgcolor).
    Look at the double quotes used in the applet tag now!!!

Maybe you are looking for