Need help hooking up Omega Vacuum Sensor?

I need some help connecting a Omega Vacuum Sensor (PX141-015v5v) to a Feed Through Module on a SC-2345. I am confused on which wires go where. I am using LabView 7.0 for DAQ. Any programming tips would be helpful too. Thanks

HolzschuM,
You will find wiring information as well as other configuration info at the SCC Configuration Guide.
Here is another link that discusses how to configure the SC-2345 Carrier. If these resources fail to address your concern please post back with more details (which feed-through module you are using, etc.) Good luck!
Craig H.
National Instruments

Similar Messages

Need help hooking up Maxent 42" Plasma to mac mini

i have a newly acquired maxent 42" plasma product number mx42xm11 i called their rep and he said it wouldnt work but i have read a couple forums where people have gotten other maxent monitors to work i was wondering if someone could help me set this one up.

I searched and found this:
Input/Output connections
2 x Composite video input (RCA phono), 1 x DVI-HDCP (24 pin digital DVI), 2 x S-Video input (4 pin mini-DIN), 2 x HD component input (RCA phono x 3), 1 x VGA input (15 pin HD D-Sub (HD-15)), 6 x Audio line-in (RCA phono x 2), 1 x Subwoofer output (RCA phono), 1 x Audio line-out (RCA phono x 2), 1 x VGA output (15 pin HD D-Sub (HD-15)), 1 x Serial (9 pin D-Sub)
It looks as simple as connecting a standard VGA cable from the Mini to the VGA port. It also listed the resolution as 1024x768, which is a standard 4:3 resolution.
You could also try a DVI cable as long as your DVI input looked similar to tha back of your Mini.
Where would you need help?
Greg

Poor student researcher in desperate need help hooking up an Adam 4017 and 4018m to windows 7 computer!

Thought I was getting a great deal. Like the loggers. Have them hooked up but I can not link to any program. Grant it I am a novice when it comes to these things. Im a microbiologist looking for bacteria that makes electric not a programmer.
I need the most cost effective way to record data off of these loggers. Im supposesd to begin a project on friday. Dasylab? Anything. If I can just collect the numbers in a folder I can process.
Please help.
Thanks

Do you have LabVIEW?
If you do, start searching the forums. Questions about Adam modules have come up before. If you are still stuck, then post back with specific questions.
If you want help with DasyLab, then you've come to the wrong place. Try posting in the DASYLab forum.

Need help hooking up my macbook from 2009 to my samsung B2430HD LCD monitor

can not get a clear picture when hooking up my macbook to a 24inch LCD samsung b2430hd I have a mini dp to hdmi and hooked up the other end of the hdmi cable to my monitor but it isnt perfect quality it looks a little blurry. someone please help me! should I get a mini dp to vga and hook it up with a vga connection? I also read that I should change the 60 hertz to a lower one. Why wouldnt it work with HDMI I thought HDMI was the best quality? Is it because the samsung monitor isnt compatible with MAC's? please help

Csound1 wrote:
AlexxHansson wrote:
Sorry, just closed all the tabs.
Thank you for trying to help. I´ll post the links if i find them again.
The links are in your history, one click and you'll have them and you can post them for all to see.
Would take to long to find them all with good information. But this is one.
https://discussions.apple.com/thread/2355403?start=0&tstart=0
And then i tried this:
http://hints.macworld.com/article.php?story=20090828224632809
Didnt work either.
The maximum resolution for the monitor is 1080p. I have no problem getting this from my computer. When i use the HDMI i get 1080p, when i use VGA i get 1920 x 1080. Hmm

I need help hooking my Samsung 27" Class 1080p LED HDTV T27B350ND to my macbook pro

I tried hooking my mac bool pro to this samsung monitor and all I get is the picture of the universe that came with the laptop and my mouse is on the monitor, but that is it.... help?

help with what? sounds like it's working to me.

Busted Screen, Need Help Hooking Up Monitor

The screen on my Powerbook is totally busted so I tried hooking up a monitor to it, but it seems to not be working correctly. All I see is my desktop picture, and no icons (like the HD or folders on my desktop), dock, or even the menu bar are not showing up. At first, I thought it was a ratio issue since the monitor is more square than the laptop screen, and therefore cutting the edges out where the menu bar, etc. would lie, but I'm pretty sure that's not the issue. I'm guessing I have to go into my system prefs and set the computer up to work with the monitor, but the problem is since the screen's totally shot, I can't even go in and do that. Any suggestions? Thanks!

Hi, hobageeba. What is the maximum resolution offered by your external monitor (consult its manual or the manufacturer's online specs for it)?
If the external monitor's maximum resolution (1024 x 768 or 1600 x 1200, for example) is as large as or larger than the maximum resolution of your Powerbook's display, you may be able to get a normal desktop — including the menu bar, desktop icons, etc. — displayed on the external monitor by pressing the F7 key on the Powerbook's keyboard. That should toggle the external display from Extended Desktop mode into Display Mirroring mode, in which the same video signal is sent to both displays, allowing you to use the external as the main display. (Note: under some circumstances, toggling F7 has no effect — and I don't know what circumstances, or why not. If it doesn't seem to do anything, it probably hasn't done anything, and it won't be helpful to you.)
Typically, if the external monitor's resolution is higher than the built-in display's, a mirrored video image will be displayed in the center of it surrounded by black, instead of filling the monitor. That wastes screen real estate, but at least you know you're seeing the whole desktop, and if your monitor is good, the image will be as sharp as it was on the built-in display when it worked.
If the external monitor has a lower maximum resolution than the built-in screen, the results of switching to Mirrored mode are less predictable. You may see only the center of the desktop, with the menu bar, hard drive icon, and other icons that were at the edges of the desktop "displayed" outside the edges of the external monitor. In that case it may be impossible to tell the difference between Mirrored and Extended Desktop modes, depending on what your desktop background image is. I don't know of a way to overcome that.
Whatever you find out about the monitor's resolution, give the F7 toggle a try and see what happens.
Message was edited by: eww

Need help hooking up my daughters computer on my wireless router.

I am totally new to the wireless world. I just bought a lynksys Wireless-G WRT54G wireless router. I hooked my new Dell XPS400 via the wired connection and my son's Dell inspiron notebook up via wireless. My daughter just got back from Hong Kong with a Toshiba computer and it sees my wireless network but it is asking for different information than my son's computer did. All I had to do with his was give the Key code and reboot the computer and he was able to get right on. Her computer is asking for the "Network Name (SSID)", "Network Authentication" and "Data Encryption", none of which am I sure what it wants. The only block calling for a key # is grayed out.
Is there anyone who might can give me some guidance on this?
Thanks

Family sharing is only iOS 8 (and later)
I recommend that you
Create a NEW account/ID for her using these instructions. Make sure you follow the instructions. Many do not and if you do not you will not get the None option. You must use an email address that you have not used with Apple before. Make sure you specify a birthdate that results in being at least 13 years old
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
More details of how:
http://ipadhelp.com/ipad-help-tips-tricks/how-to-get-free-apps-from-the-app-stor e-without-a-credit-card/
Use the new ID on her iPod but only for:
Settings>Messages>Send and Receive
Settings>FaceTime
Settings>GameCenter
and Settings>iCloud if you want her to have separate Contacts Calendar and some other things.
Use your Apple ID for Settings>iTunes and App stores so you can share purchases.

Need help hooking up an old laser printer to my wireless router

I have an old HP Laserjet4 Plus that has been a workhorse. I've had it for years and it still works great. Previously I was using it as my network printer, plugged into a WRTP54G Linksys Vonage router. That setup worked fine, but over time the router began to drop my connection over and over. I decided to buy a new router and leave the old one to only use as a Vonage device.
I bought a WRT54GL and got it going yesterday (with the help of Linksys tech support). It is now my front router and the old Vonage router is plugged into it just so my telephone service can work. Now my telephone works and my wireless connection works, but I am unable to make my network printer work.
I know that my laptop has the proper driver as the printer was working fine through the old router. What do I need to do to get my printer working again?
Also, I am not very technically savvy so please spell out any steps I need to take for a novice. Thanks so much for your consideration.

yuppers you can.
but first write down that your rounter is now 192.168.15.1 not 192.168.1.1
after you made the last change did you have to restart your pc?
you will need to print out a status page like you did on the other. what is the current ip address it has? is it in the 192.168.15.xx range? if it is then what is it? as long as its .3 or higher but not .100 - 49 then skip the next step. keep in mind we want the printer to be static ip.
ok anyways, on your new printer you will need to set it to a static ip of 192.168.15.3 with a gateway of 192.168.15.1 and sub as 255.255.255.0 just like your other printer except the ip address off by one.
and in your pc right click on the printer > properties > ports > and either add 192.168.15.3 or modify the existing ip <<<really all we are doing is matching the ips so if printer is 192.168.15.35 make it that. make sure the printer is selected to 192.168.15.3 press save.
enjoy and i hope your hair grows back out =)
http://www.airspaceonline.com

I need help hooking my camcorder up to my Mac!

I have an old mini DV camcorder from around 1997, and I have the proper cable to hook it up to my computer but it doesn't automatically detect it. Is there any software I can use to transfer analog to digital?
Thanks!
I will post pictures as a reply!

For some reason my mac won't let me upload pictures. Anyway it's a Sony mini DV Handycam Vision (DCR-TRV9)
with an IEEE 1397 cable.

Need help hooking up a keyboard!

I have a korg triton and i just bought a macbook, does anyone know how i can hookup my keyboard to my laptop so i can record what im playing. This is all new to me so im not sure what i need?

You'll need a MIDI interface if you want to do that type of thing or, you can use an audio interface to play "live" into your recording software.

NEED HELP --- hooking up tv, cable box, home theater

60" Samsung smart TV --- contains several HDMI inputs
Time Warner HD cable box --- contains 1 HMDI input; components as well
LG Home Theater in a box, Model #BH6820SW --- contains 1 HDMI output, red/white aux input, & yellow video output.
Very simple...... I want to turn my TV on, change channels with cable box remote & have my sound from TV come out of this home theater in a box I just bought.
I've been at this for hours and I'm ready to take it back because of the ongoing frustration. I have 3 HDMI cables to use (which obviously I won't need all of them), I have a red/white audio cables and a yellow video cable to use if needed.
Can someone out there PLEASE explain how this can be done?????????
Thanks.

You may be able to do it by running a Digital Optical cable to the Digital optical input on the LG from the TW Cable Box, and a seperate HDMI cable to the TV from the TW Cable box.
Honestly though, I'd take it back and get a an AVR with HDMI switching, a set of speakers, and a standalone Blu Ray player. It'll cost more, but you'll get a better feature set, better performance, and more flexbilty to add more devices down the road.

Need help hooking up NEW ipod

HI i had the ipod nano and just recently got the new ipod video 30g...I backed up all my songs from itunes onto cd..then i deleted all the songs off the ipod nano and itunes. I then used the new Ipod/itunes installation cd-rom...i installed itunes and then restarted my comp...now i cant get itunes to open or have the computer(windows) recognize my ipod video. Can someone PLEASEEEEEE help!!! thanks i appriciate it!
~jen

Welcome to Apple Discussions!
Make sure these are installed...
iTunes
iPod Updater
Try reinstalling those if they are already installed (using the above links to make sure you get the most up to date software).
If iTunes still will not open, try these...
iTunes Does Not Open Or Unexpectedly Quits
iTunes Does Not Open After Upgrading
iTunes Does Not Open If Firewall Software Is Not Up To Date
Finally, the iPod not being recognized is likely related to iTunes not opening.
btabz

Need help hooking up HDTV to iMac using Thunderbolt/HDMI on OS Lion

I have been trying to figure out why my HDMI television gives me a "No signal" message when I hook it up to my iMac. It is the 2.5GHz Intel Core i5, running OS X, version 10.7.5.
How do I hook this up? I just bought a new TV and the one I had before this, I used to just hook the HDMI cable in from the Thunderbolt port to the HDMI port on the back of the TV and it would immediately just come on. Now I get a "No signal" message when I do it. Is there a setting somewhere I'm missing?
Thanks.

Do you have another adapter / cable to test with?
what about another port on the TV?
What about trying the old tv?
you could check the display settings:
apple menu
system preferences
show all
displays
arrangement tab (arrangement tab only shows up when the mac detects a 2nd display. )
gather windows

Need help hooking up 2 i pods - please

I have an ipod classic and have my library set up for a long time. I bought a nano for my daughter for xmas and hooded it up. I think I should have selected new device or something because her nano is now connected to my classic so all my songs are on her menu when she turns it on. Does anyone know how I can seperate hers from mine and make a new library for her. Thanks, present supposed to be from Santa but she'll know also its a pain having my songs on her i pod Thanks!! clueless about ipods!!

Click here for options.
(38198)

Need help hooking up firewire/usb to me neo2-fis2r

i just registered to this forum today, and decided to ask the age old question! that i'v never been able to find the answer too
iv had my current set-up for about 8 months and still dont have the usb2/firewire working atop my case
can anyone guide me on how to do it?
thanks
-d94

did you buy the board as new ?
do you still have the manual for it ?
there should be a firewire d-bracket to install.
the connectors are fool-proof.
usb connectors are descibed in the manual as well
external usb connectors comes from the case it self.
http://www.msi.com.tw/program/support/manual/mnu/spt_mnu_detail.php?UID=433&kind=1

Need help hooking up Omega Vacuum Sensor?

Similar Messages

Maybe you are looking for