Need help hp 520 power on password ican' break it

pls help hp 520 power on password i try reset in bios still on power on password

Similar Messages

Need help estimating processing power required to support new process

Hi,
I am putting up a new server spec for a new project. I need help estimating processor power I need.
Here are, in short, the steps of the main process:
- Load the data:
Incoming file contains 160 mln rows. The SIZE of this file is 250 GB. The file has about 60 columns, out of that I upload 50 into my table.
Record length is 1500 bytes, in the table.
- Validation/calculations:
After the upload I validate EACH row in this table against 20 rules that are defined in the RULES table.
It is all math, like this column plus that column must be equal to this number, and validate the third column against this number.
- Output stage:
Records that pass validation go to one table, those that didn't go to the other table.
Then the first table (with good records) is extracted to a file. Those from the "wrong" table are also get inserted into "review" table
This whole process should take about 5-6 hrs.
This file contains 6 month of data.
Some times, I will run validation against 2 year worth of data, means validate two "annual" tables, each one is 500 GB in size. According to the requirements, this process should take no more than 1 day.
For this process I write hardware spec for a new server.
I have a hard time figuring out how much processor power I need for this process? to validate this much data in that much time.
Is there any formula or a guideline to tell what processor I need? I was looking at this one, but I wish I could estimate before I buy and try (and possibly fail, and have a biiiiig problems)
Intel Xeon E5-2640 (6 core, 2.50 GHz, 15MB, 95W)
Number of processors: 2
RAM: 16GB
Any help is very appreciated.
Thanks in advance
Edited by: 933238 on Jun 13, 2012 12:25 PM
Edited by: 933238 on Jun 13, 2012 12:28 PM

Hello Ajay,
Please have a look to these blogs (the second one should be particularly interesting regarding your request) :
/people/kamran.ellahi2/blog/2006/01/13/setting-up-sap-service-desk-123-and-go
/people/dolores.correa/blog/2007/10/06/service-desk-support-team-determination
Hope this helps.
BR.
Stéphane.

Just got an iphone 4 from my dad and its his old iphone and i was gonna delete his account so i can put my account on the iphone but he does not remember the password so I couldnt delete it. I need help deleting it without a password

just got an iphone 4 from my dad and its his old iphone and i was gonna delete his account so i can put my account on the iphone but he does not remember the password so I couldnt delete it. I need help deleting it without a password.

If the iPad has Activation Lock - that is, it's asking for the previous owner's Apple ID and password to activate the device or to turn off Find My iPhone - then you will need that information. There's no way around it If your father can't remember the password, he'll need to recover it.
http://iforgot.apple.com
If he can't do it via that page, then he'll have to call Apple Support and ask to speak with Account Security.
If that's not the "password" you meant, please post back and clarify.
Regards.

Need help in recovering portal admin password - URGENT

Hi,
I am unable to start the ALUI LDAP Service and couldn't login to the portal too. Below is the error that I am getting when trying to start the ALUI LDAP Service and I m looking for help to reset the administrator password.
INFO | jvm 1 | 2013/01/16 20:33:11 | Initiating LDAP server start sequence...
INFO | jvm 1 | 2013/01/16 20:33:11 | Starting server on port : 3389
INFO | jvm 1 | 2013/01/16 20:33:11 | Initializing LDAP/X.500 BER protocol codec...
INFO | jvm 1 | 2013/01/16 20:33:11 | Detected 98 active CPU cores.
INFO | jvm 1 | 2013/01/16 20:33:11 | ApacheOpenLogFactory successfully loaded.
INFO | jvm 1 | 2013/01/16 20:33:12 | ApacheOpenLogFactory successfully loaded.
INFO | jvm 1 | 2013/01/16 20:33:12 | Could not start LDAP listener on port 3389:javax.naming.ConfigurationException: Unable to instantiate authtication provider Java class "com.bea.alui.directory.backend.auth.plumtree.PlumtreeAuthenticator". Please check your configuration and ensure that jvm has permission to instantiate this class.
INFO | jvm 1 | 2013/01/16 20:33:12 | WrapperStartStopApp: start main method completed
INFO | jvm 1 | 2013/01/16 20:33:12 | Wrapper Manager: ShutdownHook started
INFO | jvm 1 | 2013/01/16 20:33:12 | WrapperManager.stop(0) called by thread: Wrapper-Shutdown-Hook
INFO | jvm 1 | 2013/01/16 20:33:12 | Send a packet STOP : 0
DEBUG | wrapperp | 2013/01/16 20:33:12 | read a packet STOP : 0
DEBUG | wrapper | 2013/01/16 20:33:12 | JVM requested a shutdown. (0)
DEBUG | wrapper | 2013/01/16 20:33:12 | wrapperStopProcess(0) called.
DEBUG | wrapper | 2013/01/16 20:33:12 | Sending stop signal to JVM
DEBUG | wrapperp | 2013/01/16 20:33:12 | send a packet STOP : NULL
INFO | jvm 1 | 2013/01/16 20:33:12 | Received a packet STOP :
INFO | jvm 1 | 2013/01/16 20:33:13 | Thread, Wrapper-Shutdown-Hook, handling the shutdown process.
INFO | jvm 1 | 2013/01/16 20:33:13 | calling listener.stop()
INFO | jvm 1 | 2013/01/16 20:33:13 | WrapperStartStopApp: stop(0)
INFO | jvm 1 | 2013/01/16 20:33:13 | WrapperStartStopApp: invoking stop main method
INFO | jvm 1 | 2013/01/16 20:33:13 | Initiating LDAP server stop sequence...
DEBUG | wrapper | 2013/01/16 20:33:09 | JVM signalled a start pending with waitHint of 5000 millis.
DEBUG | wrapperp | 2013/01/16 20:33:09 | read a packet STARTED :
DEBUG | wrapper | 2013/01/16 20:33:09 | JVM signalled that it was started.
DEBUG | wrapperp | 2013/01/16 20:33:10 | send a packet PING : ping
INFO | jvm 1 | 2013/01/16 20:33:11 | Received a packet PING : ping
INFO | jvm 1 | 2013/01/16 20:33:11 | Send a packet PING : ok
DEBUG | wrapperp | 2013/01/16 20:33:11 | read a packet PING : ok
DEBUG | wrapper | 2013/01/16 20:33:11 | Got ping response from JVM
INFO | jvm 1 | 2013/01/16 20:33:11 | OpenLog: Registered application name: aluidirectory.osha-trn-wcims-01.alui (local machine only)
INFO | jvm 1 | 2013/01/16 20:33:11 | Initiating LDAP server start sequence...
INFO | jvm 1 | 2013/01/16 20:33:11 | Starting server on port : 3389
INFO | jvm 1 | 2013/01/16 20:33:11 | Initializing LDAP/X.500 BER protocol codec...
INFO | jvm 1 | 2013/01/16 20:33:11 | Detected 98 active CPU cores.
INFO | jvm 1 | 2013/01/16 20:33:11 | ApacheOpenLogFactory successfully loaded.
INFO | jvm 1 | 2013/01/16 20:33:12 | ApacheOpenLogFactory successfully loaded.
INFO | jvm 1 | 2013/01/16 20:33:12 | Could not start LDAP listener on port 3389:javax.naming.ConfigurationException: Unable to instantiate authtication provider Java class "com.bea.alui.directory.backend.auth.plumtree.PlumtreeAuthenticator". Please check your configuration and ensure that jvm has permission to instantiate this class.
INFO | jvm 1 | 2013/01/16 20:33:12 | WrapperStartStopApp: start main method completed
INFO | jvm 1 | 2013/01/16 20:33:12 | Wrapper Manager: ShutdownHook started
INFO | jvm 1 | 2013/01/16 20:33:12 | WrapperManager.stop(0) called by thread: Wrapper-Shutdown-Hook
INFO | jvm 1 | 2013/01/16 20:33:12 | Send a packet STOP : 0
DEBUG | wrapperp | 2013/01/16 20:33:12 | read a packet STOP : 0
DEBUG | wrapper | 2013/01/16 20:33:12 | JVM requested a shutdown. (0)
DEBUG | wrapper | 2013/01/16 20:33:12 | wrapperStopProcess(0) called.
DEBUG | wrapper | 2013/01/16 20:33:12 | Sending stop signal to JVM
DEBUG | wrapperp | 2013/01/16 20:33:12 | send a packet STOP : NULL
INFO | jvm 1 | 2013/01/16 20:33:12 | Received a packet STOP :
INFO | jvm 1 | 2013/01/16 20:33:13 | Thread, Wrapper-Shutdown-Hook, handling the shutdown process.
INFO | jvm 1 | 2013/01/16 20:33:13 | calling listener.stop()
INFO | jvm 1 | 2013/01/16 20:33:13 | WrapperStartStopApp: stop(0)
INFO | jvm 1 | 2013/01/16 20:33:13 | WrapperStartStopApp: invoking stop main method
INFO | jvm 1 | 2013/01/16 20:33:13 | Initiating LDAP server stop sequence...
INFO | jvm 1 | 2013/01/16 20:33:13 | LDAP server stop sequence failed:java.net.ConnectException: Connection refused
ERROR | wrapper | 2013/01/16 20:33:46 | Shutdown failed: Timed out waiting for signal from JVM.
ERROR | wrapper | 2013/01/16 20:33:46 | JVM did not exit on request, terminated
INFO | wrapper | 2013/01/16 20:33:47 | JVM exited on its own while waiting to kill the application.
DEBUG | wrapper | 2013/01/16 20:33:47 | Signal trapped. Details:
DEBUG | wrapper | 2013/01/16 20:33:47 | signal number=18 (SIGCHLD), source="unknown"
DEBUG | wrapper | 2013/01/16 20:33:47 | Received SIGCHLD, checking JVM process status.
STATUS | wrapper | 2013/01/16 20:33:47 | JVM exited in response to signal SIGKILL (9).
DEBUG | wrapper | 2013/01/16 20:33:47 | JVM process exited with a code of 1, setting the wrapper exit code to 1.
DEBUG | wrapperp | 2013/01/16 20:33:47 | server listening on port 32010.
STATUS | wrapper | 2013/01/16 20:33:47 | <-- Wrapper Stopped
Edited by: 982366 on Jan 16, 2013 9:21 PM

Dear Satish,
My email adds is : [email protected]
Do u have any MSN or Yahoo Messenger, so you could guide me in real-time.
I'm in Indonesia and my internet connection was extremly slow.
I need to wait for 12 Hrs just to donwload the EXE. zip. And another 1 hours with failure installment process.
I've told in the forum about my progress and still having difficulty to connect to the SQLPLUS in path.
My aim is to get install iSQLPlus.
I'm not urging you to assist me, just when you feel[b] free and happy, you can mail me back or chat online with me by providing me you messenger address.
Thank you very much in advance for your geneoursity bow
Warmest rgds,
Harry.-

I have recovered my stollen iMac G5 and I need help to enter my old password!, I have recovered my stollen iMac G5 Need help to enter my old password?

I have recovered my G 5 I Mac that was stollen in 2007.
I have it now and the theif entered his name password,
I need to recover my account and password.
Want to use it in my wood shop.
I think it is running on 10.4 Tiger?

Changing or resetting an account password via GUI:
Resetting a user's password
Resetting the original administrator account password
http://docs.info.apple.com/article.html?artnum=106156

I need help finding a power supply

I need to find a power supply that is compatible with my Compaq Presario SR5816F
It needs to have a minimum output of 12v @ 18 amps and have at leaast 350 wattts...
thanks.
This question was solved.
View Solution.

See my reply to your later thread:
http://h30434.www3.hp.com/t5/Desktop-Hardware/Will-this-power-supply-work-with-my-PC/m-p/4292292#M85...
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

HT3096 Someone please help, I'm a broke a$$ college student who needs help with a power Mac G5

Im considering buying a power mac G5 but only cuz its all i can afford and i got an idea about hooking ut up to my tv but i would want to be able to use a wireless keyboard and traction pad but i did some reserch online and found out i need a airport extreme with 2.0 EDR to enable bluetooth which is a requirement for the wireless keyboard. Where can I find the AirPort Extreme with Bluetooth 2.0+EDR card? There dosent seem to be any place online that sells it and lets say I do install the airport extreme card and enable wifi on a power Mac G5, will I be able to use a apple wireless keyboard with it? And just a side question, for the age of the computer what OS should I have installed, I'm not to femilliar with apple software, the only apple products I have are old iPods n a 4s. Oh and I would mainly use it for going online, a little bit of vid editing, watching YouTube vids, homework and uploading and listing to music, I would love to wirelessly sync my iPhone to the power Mac wirelessly.

Forgot Your Account Password
For Lion, Mountain Lion, or Mavericks
    Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     When the menubar appears select Terminal from the Utilities menu.
     Enter resetpassword at the prompt and press RETURN. Follow
     instructions in the dialog window that will appear.
     Or see:
       Reset a Mac OS X 10.7 Lion Password
       OS X Mountain Lion- Reset a login password,
       OS X Mavericks- Solve password problems,
       OS X Lion- Apple ID can be used to reset your user account password.
For Snow Leopard and earlier with installer DVD
     Mac OS X 10.6- If you forget your administrator password,
     OS X- Changing or resetting an account password (Snow Leopard and earlier).
For Snow Leopard and earlier without installer DVD
    How to reset your Mac OS X password without an installer disc | MacYourself
    Reset OS X Password Without an OS X CD — Tech News and Analysis
    How To Create A New Administrator Account - Hack Mac

HT4623 need help in changing name and password in free ebooks

I cannot get on free ebooks since I changed back to COMCAST can anyone help me thank you so much

Hi Prasant,
The others seem irritated by the vagueness of the question. In the development forums there have been worse flamewars than this when someone posts a requirement and expects the code in return. Normally I just delete the whole lot, but perhaps you still want to explain what you are doing here.
But before that, perhaps you want to consider "why" you should not do this...
a) Those users would most likely already exist in your AD with an AD password already.
b) Those users might possibly all be ABAP users "somewhere" (your options are typically wide...) and have a password there already.
c) No need to hardcode the password.
d) No need to create Java roles, necessarily.
If you provide more detailed information of what you would like to achieve here, and considering that it has been done before... then I will move this to the portal administration for you.
Though they might also react unexpectedly, so perhand try a search first.
Hope that helps and no hard feelings.
Cheers,
Julius

I need help for install and configure password sync from AD to OID

Hi guys!
I need to sync passwords from AD to OID, first all, ¿What software do I need? I read some docs and don't find the good config.
I'm trying with:
-Database 11g
-Weblogic 11g
-SOA 11g
-IDM 11g
-IAM 11g
First I install the Database and load the schemas with RCU, next install Weblogic without domian, next install SOA, next install IDM (OID and DIP) in a new Weblogic Domain, next install IAM, next configure IAM in the domain created before, next configure SSL, check the config by using ldapbind, next configure DIP.
It's that ok?
¿What I am doing wrong?
Thank you all.

If all you need is AD & OID then OIM is not required. DIP alone can handle this
Password sync should work using DIP. if this is not working then check synchronization mapping and verify that password attribute is also part of this AD-OID sync. Enable debug in synchronization profile or raise an Service Request with Oracle support.
Check
http://docs.oracle.com/cd/E23943_01/oid.1111/e10031/odip_actdir.htm#CHDIGDEH
and
http://docs.oracle.com/cd/E23943_01/oid.1111/e10031/odip_config_integration.htm#BABBFAAJ
and
http://docs.oracle.com/cd/E23943_01/oid.1111/e10031/odip_adpasswordsync.htm#CHDBIIJC
Atul Kumar

Need Help related to Power Spectrum of two signal

Hello Sir,
I have two signals of different frequencies but i want to take the FFT power spectrum of both signals at same graph . So for that case i take the FFT power spectrum of both signal indivisualy and after this build the array. so i got the one graph and all the components in same graph. Now
The problem is that in that graph i want to extract the magnitudes at each frequency, but when i extract the information from final graph it will be the " 1D array of Cluster of 3 Elements" so its information is saprate for these two signal. but i want to tale the magnitude at each frequency , how can i got this sir . Please Help me
Agnivesh

Sir it works thanks but there is one new problem is that wahen i am going to extract the magnitude for every frequency it is also works, but my question is that if my frequency is in floating point then how can i extract magnitude for that frequency. i mean i extracted the magnitude for every frequency component starting from 0 to 1...2..3...4.............so on (Frequency ) but if my frwquency id 2.3Hz so how can i do this.i am sending you my VI also
Agnivesh
Attachments:
Analysis HP Compressor test 1.vit ‏3485 KB

Need help with html code for password logins

I'm building a site and need to have a login page where multiple users can have unique usernames and passwords and then all be redirected to the same page within the same website. Does anyone have any code advice or tips on how this can be done in iweb. I getting stuck at the point in the code where I have to enter the site to be redirected to upon entering the correct username and password. I would greatly appreciate any advice or tips. Thanks

Its done on the server rather than in iWeb....
http://www.iwebformusicians.com/iWeb/Comments-Password-Protect.html

Need help w/ G4 Power Mac PLEASE!

I bought a used & ancient I know Mac for my kids to use for school project ect. It is a G4 Power Mac. It came w/ all the originial cd's. The guy told me they had been using it mainly his kids as well but he took everything off it & cleaned it to original. I am trying to reinstall the software. When I put the 1st disc in & I followed the instructions of restarting the computer & holding down the C key. It gets to this blue screen that looks like a little man holding a sword all over it & nothing comes up. Any help appreciated! THANKS!

Hello,
Could it be a spinning gray radian?
http://support.apple.com/kb/TS2570
Hold the Option/alt key at powerup, what choices does it show for a boot source?

Need help fixing my Power Supply (delta 710W)

My Power Mac G5 had been acting strange lately in the form of not turning until I waited a day after turning it off. Thankfully, I have determined the cause to be the power supply after using the apple hardware test and reading other posts. When I press the power button before waiting, it clicks twice and turns off. If I do wait, the computer works normally (im actually typing on this computer right now!). Given the fact that I am a financially impaired diy technician, I want to fix it my self. Do be aware that I will be taking the necessary precautions while working on this thing because I am aware of the danger it involves. I think it could be a VERY basic issue, so any ideas would be helpful. Thank you.

Have you tried measuring the voltages of the PSU?
http://macosx.com/forums/hardware-peripherals/298426-how-test-g5-power-supply.ht ml
http://www.insanelymac.com/forum/lofiversion/index.php/t105113.html
http://www.applefritter.com/node/6561

Need help fixing my power jack

My hp hstnnc18c power jack is pushed in and I need to fix it

Have you tried measuring the voltages of the PSU?
http://macosx.com/forums/hardware-peripherals/298426-how-test-g5-power-supply.ht ml
http://www.insanelymac.com/forum/lofiversion/index.php/t105113.html
http://www.applefritter.com/node/6561

Need help changing Wifi name and password.

I want to change my home wi-fi and password, so I need to go to the servers IP address. But Safari says it can't connect to the server. I've deleted cookies, etc to no avail. Is it a problem on the side of the server? Do they just have a firewall against outsiders (so they can't change their wi-fi info)?

Why don't you read the manual for your WiFi access point/router...

Need help hp 520 power on password ican' break it

Similar Messages

Maybe you are looking for