Need Help HP DM3 (DM3-1130us) Laptop will not power on. No power at all except for light on a/c jack
Hello, I need some help.
I have a HP DM3-1130us Laptop that will not power on at all.
the only thing that happens when I plug it in is the power jack lights up.
When the power button is used absolutely nothing happens.
No power, no fans, no leds, no on/off cycles, no beebs, absolutely nothing
just the light by the power jack that says the cord is plugged in.
The laptop has Windows 7, 320gb hdd, 4gb ram.
I have tried new power adapter and still nothing.
I have taken the battery out and tried and nothing.
I've tried the option where you take the battery out and hold the power and nothing.
I have tried with different hard drive and no hard drive and nothing.
I have tried reseating the ram and tried new ram modules still nothing.
So I am kind of stumped on what to do, the laptop will just not turn on.
Its not under warranty anymore so cant send it off.
It has not been exposed to any elements(extreme heat or water).
and its never been dropped or anthing.
Im kind of wondering maybe the power button board its self is bad?
If feels fine, its not loose or anything but could it
have just stopped working? for those who are not familiar with this model.
the power button is on the side and is a kind of drag and release button.
Its also on the same board with the Wifi button and 2 Usb ports.
But Im wondering before I buy a new one if this is what it could be.
Or could the motherboard its self be bad?
But even if the motherboard is bad would it still power up
just not post?
Also does anyone know of any other way to try to power this laptop up
without using the slide button. I mean kind of like off a Dv6000 you can power the laptop on by using the Quicklaunch buttons on top but this laptop does not have those.
If anyone can provide any information I would appreciate it.
Thank you.
Hey Tyler,
Unfortunately it is difficult to troubleshoot this type of issue. The majority of the time when the computer wont power on with the same symptoms you described, the power supply board is faulty. Most of the time if the motherboard is bad it should at least turn on or so some signs of life. Like I said, this is most of the time. Sometimes it could do exactly what your experiencing. I would suspect the power supply board has failed since you are not receiving any sort of lights, sounds, etc.
You could check the motherboard for swollen capacitors or loose solder joints but sometimes you wont be able to find anything.
I hope this helps answers your questions,
Sean
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
Similar Messages
-
Envy DV7 laptop will not boot without the power cord being connected
My laptop won't boot on its own even when the battery indicator reads "fully charged (97%). If I have the power cord plugged into the computer (and the wall), it boots right away. Without the power cord, the "power indicator light" flashes once, the screen brightens to a lighter shade of gray, then it just shuts down.
I'm thinking I need to replace the battery but I thought it best to check with the experts first...................☺
Thanks!!
ETA..........I just saw the post about power cord failure. My power cord is one of those affected and I will be filling out the request for a replacement. Unfortunately my serial number is apparently located inside the battery compartment. I'm wondering if my cord has overheated and caused this boot problem with my computer.Hello, @jksweeney
Welcome to the HP Forums.
I see that your having an issue with the power and your notebook. That you've applied to have the power cord replaced as it was part of the recall.
Please let me know when that has been taken care of if the issue remains. I will remain subscribe to this thread, so that I will be notified if you post again.
Thank you for posting on the HP Forums.
I worked on behalf of HP. -
I have done a repair on the file, I have installed the lastest updates, and nothing works. My next step would be to uninstall and reinstall the program. Does anyone have a fix for this? I have always been able to print PDF files and this just started this week.
Thanks for any help!Nothing is broken, and uninstalling will probably not help.
You have an option PRINT TO FILE in the print dialog and you must turn it OFF. -
I need help updating itunes on ipad. will not operate from pc
I have been attempting to update my ipad to the latest and greatest itunes for the past three days. I have spoken with two Apple representatives. Is there an easier way. The PC is not cooperating even with the firewalls disabled. Is there another way? Possible just by adding a link in the address bar of the ipad? The Ipad is currently running under ios 4.2.1
The PC is not cooperating even with the firewalls disabled
The only way to update your iPad is with the device connected to your computer using iTunes.
Try uninstalling your current copy of iTunes then reinstall > http://www.apple.com/support/itunes/
Try restarting the AMDS > iPad: How to restart the Apple Mobile Device Service (AMDS) on Windows
The issue might be your PC > iTunes for Windows: Gathering and using iTunes Diagnostics -
I had to do a reinstall and upgrade to Windows 7, so I may have missed something. Running a 64bit OS. Problem only seems to be in the browsers.
You may have '''Switched ON Caret Browsing'''. press '''F7 (on Mac: fn + F7)''' to toggle '''Caret Browsing ON/OFF'''
* click '''Firefox''' button and click '''Options''' -> Advanced -> General -> remove Checkmark from '''Always use the cursor keys to navigate within pages'''
* http://kb.mozillazine.org/Scrolling_with_arrow_keys_no_longer_works
* http://kb.mozillazine.org/Accessibility_features_of_Firefox
Check and tell if its working. -
My laptop will not let me install the latest version of iTunes, it says 'the installer has insufficient piviledges to access this directory' and tells me to log on as the administrator, even though I am logged on as the administrator. Please help!!
Hi Caits1988,
If you are having issues updating iTunes on your Windows machine, you may find the following articles helpful:
iTunes: Missing folder or incorrect permissions may prevent authorization
http://support.apple.com/kb/ts1277
Apple Support: Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Regards,
- Brenden -
I need help, I'm on a laptop acer ... I install Dreamweaver cs6 and I can not seem to do the keyboard raccoucie Quick tags Crt T function
Dreamweaver support forumYou posted your question 2 minutes ago.
The first thing to try is Deleting Corrupted Cache in DW. You must turn on hidden files/folders in your operating system to find them.
http://forums.adobe.com/thread/494811
If that doesn't help, try Restore Preferences
http://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs4-cs5.html
If all else fails, use the CS Cleaner Tools below followed by a software re-install.
http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
Nancy O. -
i need help guys mi karaoke videos aren't playing anymore how can i download some drivers for it ?
Drivers? You need a program to run them such as K-Jams. Then you will need to check your connections from the laptop to the monitor and make sure your settings are correct in System Preferences.
Good Luck
Pete -
Windows XP laptop will not recognize Express card V740
I do not have the original install CD that came with this Qualcom Express card. I have downloaded the Verizon Access manager. The laptop will not recognize the card. In Device Manager there are yellow question marks which indicate the drivers are needed.
I have searched this site as well as the internet and I an unable to find the drivers for this card.
Any help would be appreciated!
SFerrara
Verizon BroadbandAccess
National Access
V740
Express card 34
Qualcom 3G CMNAHi AtlantaGuy. I am sorry you are unable to find the drivers for your wireless device. I will be happy to help you further. Since you do not have the disc, go to www.vzam.net
Once you do that, on the left, click on "Supported Devices".
Search for your specific device and click on the link under the column with your version of windows.
It will then take you through the steps to download the drivers specific to your device.
Please let me know if this works for you. I am here to help
Thanks! -
Envy 15 laptop will not shutdown after installing windows 10
After installing windows 10, laptop will not shutdown , and cannot wake from sleep mode. I have to hold power button in to turn off .
corsairman wrote:
I just upgraded my laptop to Windows 7 and was advised to upgrade my printer driver for the Photosmart 3210 to a Windows 7 driver. After installing my printer will not duplex. On the printer preference page the box shows two sided duplexing (two sided).
Can you help, also when I had Vista installed the 2nd page printed upside down. I have tried to get the patch for this, but cannot find it.
You may need to enable the duplexer hardware as described in the Vista Duplex Printing Troubleshooting Guide. There is also a link there to the patches for Vista back side upside down. When you have the duplexer enabled please post here about the results printing a duplex page. If the back side is upside down the Vista patch can be applied.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V -
I upgraded for Firefox 4 and now my HP SimplePass Identity Protection (biometric scanner) on my laptop will not work. WHY? It still works with IE but I don't use IE. It worked with the previous Firefox version but now when I use the internet, it doesn't even acknowledge I have the scanner. When I run my finger over it, it opens the settings panel but does not allow use of the already saved information or allow new information to be entered. I need this corrected. Any suggestions?
I asked this same question, and just received a response:
"Thank you for contacting DigitalPersona. There will be no update releases
for DigitalPersona Personal in the future. There will be no updates for
Firefox 4 nor Internet Explorer 9. IF they work they work, if they do
not work with DPPersonal, then you will have to decide to either keep
DPPersonal and forgo Firefox 4 or IE 9, or vice versa. DigitalPersona
is leaving the consumer market and is focusing on business applications.
In fact, DigitalPersona Personal will not longer be supported after
Mid-April of this year.
We apologize for any inconvenience this might cause. Sincerely, Tech Team "
In other words, there will be NO update. -
Need help in formatting the Date - Date does not
Need help in formatting the Date - Date does not formats and give Not a valid month error in the below scenario.
select oc.ST_PGM_MGR, r.ag_dnum, get_major_work_type(r.perf_eval_rtng_id) "v_work_code", r.ag_dnum_supp "supp", r.intfinal, to_char(r.formdate,'MM/DD/YYYY') "formdate", to_char(r.servfrom,'MM/DD/YYYY') "srv_from", to_char(r.servto,'MM/DD/YYYY') "srv_to", descript, add_months(to_char
--- Bellow line of Code on trying to format it to mm/dd/yyyy gives the error
(r.formdate, 'DD-MON-YYYY'),12) "formdate2"
from table REdited by: Lucy Discover on Jul 7, 2011 11:34 AM
Edited by: Lucy Discover on Jul 7, 2011 1:05 PMYour syntax is wrong - look at the post above where this syntax is given:
to_char (add_months(r.formdate,12), 'MM/DD/YYYY') "formdate2"Look at the formula from a logical perspective - "inside out" to read what is happening -
take formdate, add 12 months
add_months(r.formdate, 12)then apply the to_char format mask - basic syntax
to_char(date, 'MM/DD/YYYY')Compare to your syntax:
to_char(add_months(r.formdate, 'MM/DD/YYYY'),12) "formdate2"You will see your format string inside the call to add_months, and your 12 inside the call to to_char.
Good luck! -
My Laptop will not recognize my Ipod
I got my new ipod touch 4g and i tryed to connect it to my laptop but mid syncing my laptop froze, now my laptop will not recognize my ipod at all.
Please help me with this issue.you really should start your own thread because hijacking another user's thread is frowned upon round here
anyhoo, maybe [this|http://support.apple.com/kb/TS1538] support article article can help.
JGG -
A135-S2276 laptop will not power up
This laptop will not power up. The green power light will light for a second then shut down. Reseated the memory, trieed new memory. The hard drive tested OK. Removed power adapter and battery, held power switch for 10 seconds. Tried without battery. The one time it did power up just kept beeping. Any suggestions?
TIA
TimPhone HP Support for warranty service. If you are in US or Canada:
http://www8.hp.com/ca/en/contact-hp/phone-assist.html
If you live in another part of the world, start here>>Contact HP
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others** -
when using more than one tab, once I have opened a .pdf using firefox my laptop will not allow me to type or click in another tab unless I drag the .pdf into it's own window? not a major problem just irritating.
I found the cause but no solution, it's actually a plugin that does that: divx plus weblpayer (it gets installed when you install DivX on your system), if you disable it and restart firefox it all works again. But I want that plugin... so DivX need to fix this, unless it is a Firefox bug in its own core... anyway these two together creates the problem.
(I'm running Firefox 9.x on OSX Lion)
I also wish firefox tab tear out tab worked more like chrome's tab tear out, much friendlier...
Maybe you are looking for
-
Is it possible to disable the user acces to online adobe cloud store services?
Hello, i need to know if it is posible to disable the cloud storage options to a designed user Thank you
-
Can't resume incremental backups
I fist finished moving and after a few weeks of sitting in a box I set up my Time Capsule to resume operation as my backup device and wireless router. Unfortunately, I must have made a mistake during setup because now my MacBook Pro is treating the T
-
Config Settings - ProductPreviewSize & ProductThumbSize
I know that in the Config Settings I can set the ProductPreviewSize and ProductThumbSize for some of the different pages, but I have two questions about these properties. 1) What if I want to have different image sizes on my productdetail and pictur
-
Hi, After ORACLE 11G software installation i tried to change the ORACLE_HOME directory. OS : RHEL 4.5 DB : 11.2.0 Previous Home Location : [oracle@localhost ~]$ echo $ORACLE_HOME /u01/oracle/prod/tech_st/product/11.2.0/db_1 Current Home Loc: [oracle@
-
Toshiba Mini Netbook Not Booting
Hi everyone, I'm sorry if this is under the wrong category as this is my first post, but anyways I am having problems starting my Toshiba Mini NB 205 netbook. It was fine until maybe the end of May. What happens is when I turn it on, nothing happens,