Need help. HP dv6 2090er. Wi-fi module upgrade

Hello everyone.
Decided to replace the module Wi fi on my laptop 2090er
However, know that not to put any work because of the whitelist
Please tell me which module can be installed in this laptop or remove restrictions from whitelist
Intel 7260.HMWANG can use ?
I found the manual dv6, possible to insert Broadcom 4313 BCM94313HMG2LP1 Half MINI PCIe Wireless Card 802.11b/g/n SPS 593836-001 593732-001 ?
Thank YOU!
This question was solved.
View Solution.

You can use any wifi card listed in the manual but it has to be a version of the card with an HP Part Number, not just the same chipset. Make sure you have the right manual for your dv6-2090er:
Your Manual
Pg. 3-6 through 3-7. The card also has to be the type for your country. I do not see the Broadcom 4313 on your list. 
If this is "the Answer" please click "Accept as Solution" to help others find it. 

Similar Messages

  • HT5654 please I need help, I have not been able to upgrade my iOS from 6.1.2 to 6.1.3?

    please I need help, I have not been able to upgrade my iOS from 6.1.2 to 6.1.3?

    Hello mpacology
    The article below will provide assistance with upgrade your iPhone operating system. You can do this through iTunes or through the Software Update section in Settings >General > Software Update
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • Need Help in Knowing Exactly What is Installed & Upgrading RAM & HD

    Hello-
    I am  not very tech savvy, so I am calling for some help here. I might be getting in over my head, but I think with some help here and from Apple articles, I should be able to correctly upgrade to the max RAM and the best quality and largets HD. I have a brand new cMBP. I wanted 16 GB (or need 16 Gb of RAM) but that configuration was not possible. I understand one needs to install RAM that is compatible with the existing RAM, which I do not know how to figue that out too.  I need to figure out how much RAM is currently installed, and either take the existing RAM out and install sticks of the best RAM I can get for this cMBP that equals 16 GB of RAM. I would like some recommendations on where to go to get the RAM, how to know what type I need (I know there are several numbers/letters that identify the RAM), and I think I found the link that shows me how to change the RAM. I do not have the proper screwdrivers so I will need to get those, but my main concern is to know what to do with the existing RAM. I know that I did order the least amount of RAM I could get since I knew I needed 16 GB so I was gong to upgrade. I did read the RAM has to be evenly divided but I am not sure exactly what that means since I do not know how many slots it has.  I stayed with the least expensive HD because I knew I was going to try and upgrade to the largest SSD (or Flash Drive-not sure of the difference). If it is difficult to swap out the existing HD 5200rpm for the best SSD, I have not been able to find that Apple article, but recommendations on a website to get these drives for the MBP I just received would be really helpful.
    Thanks in advance for any help you can give me.  Remember I am not savvy in this type of stuff so I need as much detail explanation as one can give me.

    As for the 'old' RAM - I have a drawer full of old sticks, carefully labeled. Because RAM is so cheap just now, you're not able to get much for it: maybe hand it down to a friend in need?
    Yes, the 512GB is one of the largest consumer SSDs made. OWC has a 980GB, but it's only for 3Gbps speeds and we have 6Gbps speeds on our MacBook Pros. For some good information and a 'buyer's guide' to SSDs, see Sean's SSD Buyers Guide & Information Thread. One of the drives that he recommends is the Crucial m4 series.
    I do use my Thunderbolt port - I've an Apple Thunderbolt Display and just recently (this month) added a LaCie 2Big Thunderbolt 4TB disk (it's actually 2 disks - it comes formatted as RAID 0 but I 'unraided' it and now have two 2TB disks). Lightening fast - I use one drive as a Time Machine backup and the other as my 'working' drive for any and all projects that I'm currently working on.
    Because my Denon reciever has AirPlay, I don't have external speakers for my computer any longer. My first pair were some Harman Kardon Soundsticks and they were good, but I bought the Bose Companion (it was at III then - I believe that they're at 5 now) speakers in 2006 and found them to be unsurpassed. They work great with Apple products. The Bose are expensive, but worth it.
    Try Amazon for both the Crucial RAM and SSD - they have a slight discount, anyway, from what you'd pay ordering directly from Crucial.
    Good luck,
    Clinton

  • Need help regarding Modal dialog box in module pool programming

    Hi experts,
    my program need a dialo box to popup and take some data and on pressing save button in the dialog box, the popup should close and the values in the previous screen should be updated.
    my problem is, when i execute the program, i am unable to close the dialog box. i tried use sy-ucomm but found it of no use.
    please tell me the way to access the close button in the dialog box.

    Hi,
    Use the function module :-
    Call function ‘LC_POPUP_TO_CONFIRM_STEP’
    Exporting
    TEXTLINE1 = ‘YES’
    TEXTLINE2 = ‘NO’
    TITEL = ‘R U WANT TO SAVE’
    Exporting
    ANSWER = ‘Y’.
    IF SY-SUBRC = ‘Y’.
    LOGIC TO SAVE DATA….
    ENDIF.
    REGARDS,
    Mekala vijay

  • Need help in INBOUND idoc generation function module!

    Can anyone send me the inbound idoc function module !
    i have the outbound code but i need the inbound code

    Might be a constant C_WF_RESULT_OK is assigned to
    variable WORK_RESULT .
    Please check if they are declared in the function module ..

  • Need help: playing songs in order, strangewindow message, upgrading I-Tunes

    I have 2 situations I hope someone can help me with:
    1: PLAYING SONGS IN ORDER; WINDOW MESSAGE
    I have CDs of music that when I load them onto my pc laptop the song names don’t come up—each song lists as “track 01” “track 02” etc.
    When I try to play the album thru I-Tunes on my laptop, the songs won’t play in order. i.e. ALL the “track 02”s will play before going to “track 03,” then ALL the “track 03”s will play, etc. So I made a playlist of each CD.
    Now when I try to play the Playlist, I get a window message that says, “The song “Track 01” could not be used because the original file could not be found. Would you like to locate it?” I can choose ‘yes’ or ‘cancel.’ YES takes me to folder selections. I find the song and click on it and then it plays.
    There must be an easier way. I don’t want to search for each song one at a time in order to play an entire CD in order.
    2: UPGRADE
    I need to upgrade. I have I-TUNES 7.0.2. I went online to apple.com and couldn’t find any upgrade option, so I clicked on “download I-tunes”. I got a window that says “download complete.” But how do I tell if it’s really installed? Where do I go on my computer to see what version number it shows?
    Any help is appreciated,
    Carolyn in Las Vegas

    2. Help->About iTunes
    1. You have done something that has confused iTunes about the location of the files in its library. Without knowing what happened, it's hard to make a specific recommendation, but if you moved your files around manually, move them back, and then, if you want to change the location, do it only by setting it in iTunes preferences and then using Consolidate Library.

  • Need help on IBM ServeRaid 5i BIOS/Firmware upgrade

    Hi,
    We just upgraded the Cisco Call manager on IBM xSeries 345 MT-8670-M1X server with Cisco patch WIN-OS-Upgrade-K9.2000-4-2sr6.exe. After upgrade we got this error message about IBMC ServeRaid 5i controller card.
    "Version mismatch detected: controller 1. The BIOS (version 6.10.24), Firmware (version 6.10.24), and Driver (version 7.10.18) are not a matched set and are not compatible."
    We download the BIOS/firmware upgrade Disk from this web site.
    http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-62462
    During the upgrade, the server continues ask insert disk1.
    Also this site does not have the latest device drive for IBM ServeRaid 5i in windows 2000 server.
    I need some help and you will get my highest vote
    1. Where can I get the proper BIOS/Firmware upgrade disk from Cisco?
    2. During the upgrade stage, why the server always ask “insert disk 1”. I have tried all 5 disks. But none of the work. I disconnect the mirri during the upgrade. Does it affect the upgrade?
    3. Where can I get the latest device driver for 5i work with windows 2000 server?
    Many thank
    Kevin

    Hi kevin,
    Open a case wid TAC they will direct you on the right route.

  • I need help with my wife's Iphone 4 upgrade, can you help me?

    I just talked my wife into upgrading her iphone 4, but it says something is wrong after downloading, can you help me??

    It is almost impossible to help you as you have provided no information about your issue.
    If you were to explain the issue, then maybe someone could help.

  • Need help with photoshop cs5.1 to cs6 upgrade

    i just downloaded the upgrade to cs6 - i have cs5.1 . when i entered the serial number it read " this serial number is not for a qualifying product " how do i fix this?

    Check this :-
    http://helpx.adobe.com/creative-suite/kb/error-serial-number-qualifying-product.html

  • Need help picking the correct hard drive upgrade for my MBP

    I need help picking the correct/best hard drive upgrade for my MBP. It is the 15" 2GHz Core Duo. Came with a spacious 90GB drive.
    Suggestions and recommendations very appreciated.

    It will take almost any 2.5 inch sata drive.
    Take a look at www.newegg.com and www.macsales.com to see what's out there and how much it costs.
    Toshiba have a 320gb 2,.5 inch drive in the works, but it's not quite out yet and will be expensive.
    I'll start you off..
    http://www.newegg.com/Store/SubCategory.aspx?SubCategory=380&name=Laptop-Hard-Dr ives

  • Need help adobe bridge cc output module

    I need help. I have an assignment I'm held up on completing because the adobe cc bridge does not have the output modue I need. I followed the adobe instructions page to the letter. I copied and pasted the output module folder to the adobe bridge cc extensions folder in programs/commonfiles/adobe. The only thing is the instructions then say to paste the workspace file into the workspace folder located below the bridge extensions folder. I don't have a workspaces folder there or anywhere. I even tried must making one and adding the file to it, but no go. can someone PLEASE help me with this?    I have an assignment due like now that requires the use of the output modue.thanks!

    oh,my system is windows 8.1. sorry, lol.

  • Need Help in Replacement of Function Modules

    Hello all,
    I am working on Upgrade project from ECC 5.0 to ECC 6.0. I am facing problems for Replacement of two Obsolete Function Modules. Please give me a solution. FM's  are as follows.
    1) SET_AUTHORITY : This FM is obsolete in ECC 6.0 and there is not alternative FM present in help.sap.com or any other web portal.
    2) WS_QUERY : Here as per my knowledge we use class CL_GUI_FRONTEND_SERVICES and methods FILE_EXIST or DIRECTORY_EXIST as per the parameters in old FM. For parameter 'FS' we use 'FILE_EXIST' and 'DS' we use 'DIRECTORY EXIST'.
    But in our program prev. FM has parameter 'OS' i.e. Operating System.
    But there is not method called 'OS EXIST' or similar. Please suggest suitable method.
    Thanking you all in anticipation.
    Best Regards,
    Harish

    Hi Harish,
                       I too could not find any replacement for SET_AUTHORITY
    Obsolete Modules can be used in newer versions, but it is not supported by SAP in case of any technical issues.If you still need a replacement, you can replace it by the source code in the FM SET_AUTHORITY itself and modify according to your needs.
    Below is the source code of FM SET_AUTHORITY, so you can modify it according to your requirement.
      DATA: l_actvt  TYPE tact-actvt,
            l_hier   TYPE STANDARD TABLE OF sethier WITH HEADER LINE.
      CASE action.
        WHEN 'A    '.
          l_actvt = activity-add.
        WHEN 'C    '.
          l_actvt = activity-modify.
        WHEN 'D    '.
          l_actvt = activity-display.
        WHEN 'E    '.
          l_actvt = activity-delete.
        WHEN 'UD   '.
          l_actvt = activity-display.
      ENDCASE.
      CALL FUNCTION 'G_SET_TREE_IMPORT'
           EXPORTING
                no_descriptions  = 'X'
                no_rw_info       = 'X'
                setid            = set
                tabname          = table
                root_header_only = 'X'
           TABLES
                set_hierarchy    = l_hier
           EXCEPTIONS
                OTHERS           = 0.
      READ TABLE l_hier INDEX 1.
      IF sy-subrc <> 0.
        CLEAR l_hier.
        l_hier-shortname = set.
      ENDIF.
      CALL FUNCTION 'G_SET_AUTHORITY_CHECK'
           EXPORTING
                actvt  = l_actvt
                authgr = l_hier-authgr
           EXCEPTIONS
                OTHERS = 1.
      IF sy-subrc <> 0.
        CASE action.
          WHEN 'A    '.
            MESSAGE e827 WITH l_hier-shortname RAISING no_authority.
          WHEN 'C    '.
            MESSAGE e828 WITH l_hier-shortname RAISING no_authority.
          WHEN 'D    '.
            MESSAGE e829 WITH l_hier-shortname RAISING no_authority.
          WHEN 'E    '.
            MESSAGE e830 WITH l_hier-shortname RAISING no_authority.
          WHEN 'UD   '.
            MESSAGE e831 WITH l_hier-shortname RAISING no_authority.
        ENDCASE.
      ENDIF.
    If you need help in replacing in the above source code, please post your code here so that I can help you in modifying accordingly.
    Regards,
    Vasuki

  • Need help in creating Knowledge module to aggregrate source data.

    Hi Guys,
    I am new to ODI and I am trying to create a Knowledge module. I went through the docs relating to Knowledge modules and APIs, so hopefully did my home work, I still find writing KM to be very challenging for the scenario, I have.
    The following is my scenario.
    I have two tables Employee and Department. Employee is the source and Department is the target. I need to sum salaries of all the employees belonging to a given department. And then insert the data into Department table.
    Structure of the tables is as follows:
    Employee(Source Table name)
    Employee_id
    Salary
    Dept_id
    Department(Target table name)
    id
    total_salary
    Both target and source are on the same server. The user of this KM would drag and drop both source and target tables into interface and then map the columns. In the above case, Dept_id to id and salary to total_salary and then use this IKM. And off-course the user would indicate what columns would be aggregated on and what would be used as group by. One way to tag that, would be to use those UD1,UD2 tags in target column properties. (If there is another way to tag a column to indicate a column to be used for aggregation and a given column to be used in group by during run time in source, please let me know)
    I choose to write IKM for this.
    The challenging part is that I am having hard time figuring out the columns of source table as to what column should be used as group by and what column to be aggregated on. Since the tags are defined on Target columns and not on source columns. So have to figure out the appropriate columns through the mapping at run time.
    The following is what I am planning to write in (Insert new rows ) command. And the part where I need help is how to compose select statement.
    iinsert into <%=odiRef.getTable("L","TARG_NAME","A")%>
    <%=odiRef.getColList("", "[COL_NAME]", ",\n\t", "", "((INS and !TRG) and REW)")%>
    <%=odiRef.getColList(",", "[COL_NAME]", ",\n\t", "", "((INS and TRG) and REW)")%>
    Select
    source.column1,sum(source.column2) from <%=odiRef.getFrom()%> GROUP BY source.column1
    Thanks.

    I did try as per your advise.
    Filter is not making a difference. Irrespective of me adding a filter or not, ODI generates a sql that has GROUP BY , just by looking at SUM(SALARY).
    Coming back to the main issue, this does do what I wanted to do. I was planning on using a custom KM. But I guess, this is as good as custom KM, since the work done in an interface (assuming a custom KM exists) by going through either route is the same, so I can live with this approach.
    Thanks for the help.

  • Need help using WEB module in Lightroom 2 for .mac/mobile me accounts

    Hello,
    I need help in finding the Server path information for Lightroom 2.  I am trying to use the Web module of Lightroom and build a website and instead of going through another hosting service, I want to use my Mobile ME account, can't I do that?
    I have the user name and password obviously but what is the server path, protocol, path?
    Help please!
    Thanks
    Ray

    For those Mac Users using iWeb, MobileMe, and Lightroom 2, here are step-by-step instructions on how to create a web gallery in Lightroom, upload the gallery to MobileMe, and finally, how to link the uploaded files to the wesite you created in iWeb.
    1. In the Lightroom Library module, create a collection of photos you want to display in your web gallery.  For illustration purposes, we will call your collection Sunsets.  Once created, it will be listed under Collections in the left panel of Lightroom.
    2. Switch to the Lightroom Web module and select the Sunsets collection (from the panel on the left of the screen.)
    3. Chose whichever template you like (from the list of Templates in the left panel).
    4. Fine tune the appearance of the gallery using the controls in the right hand panel of Lightroom 2.
    5. When you are satisfied with the gallery’s appearance, use your keyboard to type Command-S.  That will save your template settings (give it a unique name when saving).
    6. Open up Finder on your Mac.  Inside your username folder, create a new folder… I'll call it Web Files.  (You can choose any name you like, and locate the file anywhere on your Mac HD.)  You have just created the folder username/Web Files.
    7. Back in the Lightroom Web module, chose Export, at the bottom of the right panel, and export your gallery to the folder you just made (e.g. export to username/Web Files).  By doing so, you will have created /username/Web Files/Sunsets.
    8. Once again open Finder on your Mac.  Go to /username/Web Files/Sunsets and you will see 3 files in the Sunsets folder: bin, index.html, and resources.
    9. Open a second Finder window and in it, click on your iDisk icon.  You will soon see all of the files on your iDisk.
    10. In iDisk, click on the folder called /Web.  You will now see the /Sites folder inside the /Web folder.  I.e., /Web/Sites.
    11. Drag the Sunsets file from your Mac HD to the /Sites folder on your iDisk.  E.g, drag Sunsets from /username/Web Files/Sunsets on your Mac HD to the /Sites folder in iDisk /Web/Sites.  The Sunsets folder (and the three files it contains) will now upload to your iDisk on MobileMe.
    12. Open iWeb on your Mac. Add a new page to your website.  Call it “Galleries,” or anything you like. (You can also use an existing page if you wish.)
    13.  On that “Galleries” web page (or on an existing web page), create a picture icon, or a word, or a symbol, or anything else that you will activate as a hyperlink to your iDisk web files - specifically, you will link it to the Sunsets folder you just uploaded to iDisk.
    14. Activate the hyperlink in iWeb’s Inspector.  In the URL box, type:
    http://web.me.com/username/Sunsets  (Don’t forget to substitute your name for “username” and the name of your gallery for “Sunsets.”)
    15. Save your website in iWeb, and then publish your site.
    You will NOT see your gallery in iWeb – you will see only the link to the gallery that you uploaded to iDisk..  To view your gallery, either make hyperlinks active, using the Inspector in iWeb and click on he link to the gallery, or visit your website on the internet.  If you want to edit your gallery, you will have to do that in Lightroom… then repeat steps 7 – 11.  You cannot edit your gallery in iWeb, but you can use iWeb to change the appearance of the link to your gallery, or to change it’s location within your website.

  • Need help with SAP SD module

    Hi i am new to this forum, i need help with SAP SD module. Can you please provide me pointers or links to get started SAP SD module and start facing the interviews.

    Hi Aditya,
    For understanding the SD module itself, the link - http://help.sap.com/saphelp_erp2005/helpdata/en/8c/df293581dc1f79e10000009b38f889/frameset.htm is the ultimate one.
    Again you can also refer to the mateial "Implementing R/3 S&D BY GLYNN C.WILLIAMS".
    For Cracking interview, You can refer to "SAP SD Interview Questions, Answers, and Explanations By: Jim Stewart" which is available in the market.
    Regards,
    SARTHAK

Maybe you are looking for