Need help identifying error message on 13-inch 2012 MacBook Air

The laptop was in a damp case for 15-20 minutes; a failed boot attempt was made.  I was called at this point, and advised the user to put it in a bag of rice to pull the moisture away.  Today, she was able to boot the system, but it would shut down after a short-period of use and was running very slowly.
I ran the Apple Hardware Test and it generated the error code 4SNS/1/40000000: ID0R-4.557
Does anyone here know what that error code means?

It's a sensor error. I'm not sure which one. Please make a Genius Appointment and take it in for service.

Similar Messages

  • Need help with error message 213:8

    Need help with error message 213:8, this error message prompted after re-installing CS5.5 on the same machine (W7 Pro)
    Thanks.

    Hi TKA_,
    Please try the solutions mentioned on following forum thread.
    http://support.muse.adobe.com/thread/1305941?start=0&tstart=0
    Let me know if it works?
    Regards,
    Sumit Singh

  • I have not been able to back up for2 days.  Time machine error message: /Volumes/Data/David's MacBook Air.sparsebundle" is already in use.

    I have not been able to back up for2 days.  Time machine error message: /Volumes/Data/David’s MacBook Air.sparsebundle” is already in use.
    What now?
    Macbook Air.
    Was working fine for the past year until now.

    See more like this on the right.. this is the most common error reported here since mountain lion came out..
    Or read C12.. http://pondini.org/TM/Troubleshooting.html
    Or just restart the whole network.. in right order from off.. modem.. router / TC.. clients 2min gap.

  • Hello I bought a new 11 inch 2012 macbook air. Recently, i have been watching youtube and movies from my laptop. I have seen some green images flickering when playing videos. Does anyone have any solution or the cause of the problem ? Thank you

    Hello I bought a new 11 inch 2012 macbook air. Recently, i have been watching youtube and movies from my laptop. I have seen some green images flickering when playing videos. Does anyone have any solution or the cause of the problem ? Thank you

    Hello I bought a new 11 inch 2012 macbook air. Recently, i have been watching youtube and movies from my laptop. I have seen some green images flickering when playing videos. Does anyone have any solution or the cause of the problem ? Thank you

  • New to Java and need help with error message!

    I have just installed the oracle jdbc driver and am now getting the following error message when trying to use the jbdc driver instead of the jdbc:odbc wrap driver...
    See com.borland.dx.dataset.DataSetException error code: BASE+47
    com.borland.dx.dataset.DataSetException: Chain of 2 or more Exceptions occurred
         at com.borland.dx.dataset.DataSetException.a(Unknown Source)
         at com.borland.dx.dataset.DataSetException.throwExceptionChain(Unknown Source)
         at com.borland.dx.sql.dataset.q.a(Unknown Source)
         at com.borland.dx.sql.dataset.Database.openConnection(Unknown Source)
         at com.borland.dx.sql.dataset.Database.createPreparedStatement(Unknown Source)
         at com.borland.dx.sql.dataset.o.a(Unknown Source)
         at com.borland.dx.sql.dataset.o.d(Unknown Source)
         at com.borland.dx.sql.dataset.o.f(Unknown Source)
         at com.borland.dx.sql.dataset.QueryProvider.e(Unknown Source)
         at com.borland.dx.sql.dataset.JdbcProvider.provideData(Unknown Source)
         at com.borland.dx.dataset.StorageDataSet.a(Unknown Source)
         at com.borland.dx.dataset.DataSet.a(Unknown Source)
         at com.borland.dx.dataset.DataSet.open(Unknown Source)
         at com.borland.dbswing.JdbTable.bindDataSet(JdbTable.java:2749)
         at com.borland.dbswing.JdbTable.setDataSet(JdbTable.java:819)
         at myframes.ClaimView.btnSQL_actionPerformed(ClaimView.java:279)
         at myframes.ClaimView_btnSQL_actionAdapter.actionPerformed(ClaimView.java:440)
         at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1786)
         at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(AbstractButton.java:1839)
         at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
         at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
         at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:245)
         at java.awt.Component.processMouseEvent(Component.java:5100)
         at java.awt.Component.processEvent(Component.java:4897)
         at java.awt.Container.processEvent(Container.java:1569)
         at java.awt.Component.dispatchEventImpl(Component.java:3615)
         at java.awt.Container.dispatchEventImpl(Container.java:1627)
         at java.awt.Component.dispatchEvent(Component.java:3477)
         at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3483)
         at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3198)
         at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3128)
         at java.awt.Container.dispatchEventImpl(Container.java:1613)
         at java.awt.Window.dispatchEventImpl(Window.java:1606)
         at java.awt.Component.dispatchEvent(Component.java:3477)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:456)
         at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
         at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
    Chained exception:
    javax.naming.NoInitialContextException: Need to specify class name in environment or system property, or as an applet parameter, or in an application resource file: java.naming.factory.initial
         at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:640)
         at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:243)
         at javax.naming.InitialContext.getURLOrDefaultInitCtx(InitialContext.java:280)
         at javax.naming.InitialContext.lookup(InitialContext.java:347)
         at com.borland.dx.sql.dataset.q.a(Unknown Source)
         at com.borland.dx.sql.dataset.Database.openConnection(Unknown Source)
         at com.borland.dx.sql.dataset.Database.createPreparedStatement(Unknown Source)
         at com.borland.dx.sql.dataset.o.a(Unknown Source)
         at com.borland.dx.sql.dataset.o.d(Unknown Source)
         at com.borland.dx.sql.dataset.o.f(Unknown Source)
         at com.borland.dx.sql.dataset.QueryProvider.e(Unknown Source)
         at com.borland.dx.sql.dataset.JdbcProvider.provideData(Unknown Source)
         at com.borland.dx.dataset.StorageDataSet.a(Unknown Source)
         at com.borland.dx.dataset.DataSet.a(Unknown Source)
         at com.borland.dx.dataset.DataSet.open(Unknown Source)
         at com.borland.dbswing.JdbTable.bindDataSet(JdbTable.java:2749)
         at com.borland.dbswing.JdbTable.setDataSet(JdbTable.java:819)
         at myframes.ClaimView.btnSQL_actionPerformed(ClaimView.java:279)
         at myframes.ClaimView_btnSQL_actionAdapter.actionPerformed(ClaimView.java:440)
         at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1786)
         at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(AbstractButton.java:1839)
         at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
         at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
         at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:245)
         at java.awt.Component.processMouseEvent(Component.java:5100)
         at java.awt.Component.processEvent(Component.java:4897)
         at java.awt.Container.processEvent(Container.java:1569)
         at java.awt.Component.dispatchEventImpl(Component.java:3615)
         at java.awt.Container.dispatchEventImpl(Container.java:1627)
         at java.awt.Component.dispatchEvent(Component.java:3477)
         at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3483)
         at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3198)
         at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3128)
         at java.awt.Container.dispatchEventImpl(Container.java:1613)
         at java.awt.Window.dispatchEventImpl(Window.java:1606)
         at java.awt.Component.dispatchEvent(Component.java:3477)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:456)
         at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
         at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
    Here is the code causeing the error;
    void btnSQL_actionPerformed(ActionEvent e)
    try
    String GET_DATASET = txtSQL.getText().trim();
    Display("Executing...");
    try
    MyDisplayTable.setDataSet(null);
    catch (DataSetException ex)
    Display("ERROR 1: " + ex.toString());
    try
    queryDataSet1.close();
    catch (DataSetException ex)
    Display("ERROR 2: " + ex.toString());
    try
    queryDataSet1.setQuery(new com.borland.dx.sql.dataset.QueryDescriptor(
    database1, GET_DATASET, null, true, Load.ALL));
    catch (DataSetException ex)
    Display("ERROR 3: " + ex.toString());
    try
    if (!queryDataSet1.isOpen()) {
    queryDataSet1.open();
    catch (DataSetException ex) {
    Display("ERROR 5: " + ex.toString());
    try {
    queryDataSet1.refresh();
    catch (Exception ex) {
    Display("ERROR 5.5: " + ex.toString());
    try {
    Display("setDataSet");
    MyDisplayTable.setDataSet(queryDataSet1);
    Display("DONE setDataSet");
    catch (DataSetException ex) {
    Display("ERROR 6: " + ex.toString());
    Display("Query: ' " + GET_DATASET.trim() + " ' was executed successfully");
    catch (Exception ex)
    Display(ex.toString());
    Please let me know if more information is required. I am completely at a loss as to what more I need to do to get this to work using the new driver.
    Thank you all in advance,
    Malcolm Diaz
    Application Developer
    [email protected]
    PlanVista Solutions Inc.
    419 E.Main St.
    Middletown NY 10940
    845-346-2692

    this is more of a jdbc question rather than an internationalization. You might be able to get more help if you post it in java programming section.

  • Need help deciphering error messages!!!

    My iTunes library was continually acting up, so I finally decided to start fresh. I restored & updated iTunes, Quicktime, & my iPod. I followed the directions from a question I posted here. I drag and dropped the music back into the "clean" library, and everything was going great.
    Now I'm getting the same error messages as before. I was adding music and this message appeared.
    Error Message:
    The file "iTunes Library.itl" does not appear to be a valid music library file. iTunes has attempted to recover your music library and renamed this file to "iTunes Library (Damaged).itl".
    My library.xml file was missing some music, so I added it back to the library.itl file to see if it would work. It appeared fine afterward. The next day I went in to recreate my playlists, and received the following error.
    Error Message:
    The iTunes Library cannot be saved. An unknown error has occurred (-1450).
    Questions:
    1. What is error 1450?
    2. Are my music files (that I drag & drop)contaminated and need to be deleted and reimported?
    3. What are the causes of the 2 error messages above? I copied them to my notepad exactly as they appeared on screen?
    4. When iTunes creates a library (damaged).itl file, it also creates a new music file: song 1.m4a replaces song.m4a - which version do I keep?
    The only good news is that my iPod has always worked fine. It has no music on it now, and I don't want to hook it up to a contaminated library.
    Need help desperately...I'm beginning to hate iTunes...just want to use my iPod.
    Dell Inspiron 6000 Pentium   Windows XP   1.6 GHz, 1G RAM

    When iTunes creates a library (damaged).itl file, it also creates a duplicate song file.
    song 1.m4a replaces song.m4a - which version can I delete without creating problems?

  • Need help with error message

    I am running Photoshop elements 5.0 on Windows Vista. After downloading some pics that froze the download in the middle, I now get an error message when I try to open the organizer. Message is as follows:
    Microsoft Visual C++ Runtime Library
    The application has requested Runtime to termiinate it in an unusual way.
    Can anyone help me with this problem.

      Have you applied the 5.0.2 patch. That may help.
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=3569
     

  • Need Help w/ error message...​..

    My blackberry curve 8350 is showing error message 561constantly...Seems the desktop software isn't reading my phone either to reload software...what else can I do?

    Hi belanna,
    Welcome to the Support Community!
    If your BlackBerry® is unable to connect with the BlackBerry® Desktop Software to reload the BlackBerry® Device Software, you may want to try the steps in one of the following KB articles to force a connection.
    If you are using a Windows® computer: http://bbry.lv/L13o3O
    If you are using a Mac: http://bbry.lv/NtreH7
    Hope this helps.
    -FS
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click Solution? for posts that have solved your issue(s)!

  • Need Help with error message on the Network Systems Preferences, Please

    In Systems Preference, > Network, I get the error message "Your network settings been changed by another application," with an active OK button. However, when I click the OK button, it persists and does not allow me to access the screen. The only way to end this is to force quit Systems Preferences.
    Do you have any idea what is causing this freeze? I have a TimeWarner Internet connection (which I want to change to Verizon as soon as I resolve this). For a while I had Earthlink DSL which didn't work well at all. Could it be something with the not-used Earthlink or the current TimeWarner?
    Any ideas about the cause and, more importantly, the solution?
    Thanks,
    Jeanie

    My computers have not been networked, intentionally. I like having them autonomous. So I have a separate Internet connection for each. And maybe that's what I need to maintain.
    In the house is a Mac Mini and the house phone with new Verizon modem. In the separate office, I have my G5 tower, which is really my main computer.
    Was just on phone with Verizon Tech who did say that they do not support Mac. They made a decision not to because there are fewer of us. However, I can purchase a premium support which appears to cover such support.
    I've not seen the Verizon commercials, but I expect that they are filled with hype. The one I laugh at the most on the FIOS cable video is that they call their cable user interface "intuitive."

  • Dvd burn error--need help with error message

    Ok so I have read all the support articles and many of the discussions already posted...but still can not burn a dvd.
    so, I created a project on idvd, it just has two slideshows that I imported from iphoto. I could not burn the dvd directly from idvd, got the multiplexing/burn error message. I successfully created a disk image and was able to play it on my computer using the dvd player, I then tried to burn it using the disk utility and again got an error message after it started the writing proccess...the error said "The devise failed to calibrate the laser power level for this media" Does anyone know what this means??? I have lots of room on my hard drive and am using DVD-R sony dvds. Any help would be greatly appreciated!!!

    Hi Becca:
    Just click on the little  in the upper left-hand corner, click ' About this Mac', More Info..and open your System Profiler. Under ATA you should se something like this:
    MATSHITA DVD-R UJ-825:
    Manufacturer: MATSHITA
    Model: MATSHITA DVD-R UJ-825
    Revision: DBN7
    Serial Number:
    ---> Drive Type: CD-RW/DVD-RW
    Disc Burning: Apple Supported/Shipped
    Removable Media: Yes
    Detachable Drive: No
    Protocol: ATAPI
    Unit Number: 0
    Socket Type: Internal
    That will tell you.
    Sue

  • Novice (Ok Rookie) need help with error message

    Hello all, I hope that you can help. I am getting this error
    message when trying to submit registration information to the
    database that I have created.
    Error Executing Database Query.
    [Macromedia][SequeLink JDBC Driver][ODBC
    Socket][Microsoft][ODBC Microsoft Access Driver] You cannot add or
    change a record because a related record is required in table
    'UserTypes'.
    The error occurred in
    C:\CFusionMX7\wwwroot\Development\signup.cfm: line 67
    65 : <cfelse>
    66 : NULL
    67 : </cfif>
    68 : , 0
    69 : , 1
    SQL INSERT INTO C:\CFusionMX7\wwwroot\database\wwf2.Users
    (UserName, Password, FirstName, LastName, EmailAddress, Address,
    City, "State", ZipCode, "Admin", Allowed, UserTypeId) VALUES (
    (param 1) , (param 2) , (param 3) , (param 4) , (param 5) , (param
    6) , (param 7) , (param 8) , (param 9) , 0 , 1 , 3 )
    DATASOURCE WWF2
    VENDORERRORCODE -1613
    SQLSTATE 23000
    Here is the code for that page
    Any help would be much appreciated. Thank you all so much.
    Damien

    quote:
    Originally posted by:
    DRufus
    When I created the form, I used dreamweavers record insertion
    wizard. could this be the issue. I'm sorry if I am not
    understanding your solution.
    Usage of <cfselect> is explained in the cfml reference
    manual. If you don't have one, the internet does. The quickest way
    to find it is to google the name of the tag, complete with angle
    brackets.
    I can't comment on dreamweaver's wizards because I never use
    them.

  • Extended Program check: Need help with error messages

    Hi,
    I am getting the following error message several time on different internal table declarations:
    "Tables with headers are no longer supported in the OO context."
    This is the data declaration that it refers to:
    I_ZDAILY_MVMT TYPE TABLE OF ZDAILY_MVMT WITH HEADER LINE.
    Also, I am getting the following:
    You cannot use the "RANGES" statement within classes. Instead, use the "DATA"
    statement with the type "TYPE/LIKE RANGE OF" . . . . . . . . .              
    This is for the following data declaration:
    RANGES: I_WERKS FOR EBAN-WERKS, "PLANT RANGE
            I_VTWEG FOR I_TVTW-VTWEG,
            I_VTWEG2 FOR I_TVTW-VTWEG,
            I_VKORG FOR I_TVKO-VKORG,
            I_AUART FOR I_TVAK-AUART.
    What do I change and then how do i populate them?
    Thanks,
    John
    Message was edited by:
            John Damion

    We dont use tables with header lines any more.
    Declare a work area and use it transfer the data.
    e.g.
    types: types_ZDAILY_MVMT TYPE standard table of TABLE OF ZDAILY_MVMT.
    data: I_ZDAILY_MVMT TYPE  type_ZDAILY_MVMT,
            wa_zdaily type zdaily_mvmt.
    Now use this work area to move data into the table.
    Regards,
    Amit
    Reward all helpful replies.

  • Need help understanding error message when syncing iTouch

    I get an error message when I sync my iTouch with my MacBook. The error message reads as follows:
    "iTunes could not sync mail accounts to the iPod...because an error occurred remapping record identifiers."
    First, can anyone tell me what this message actually means? And second, any suggestions on how to resolve the problem?
    Thanks.

    it means a USB adapter. one that is connected to your computer in order to give you more USB ports than are built into your machine.

  • Help with error message opening lightroom 5 on macbook?

    I downloaded lightroom 5 on my macbook. i have os-lion. When I open the program and error message appears  saying " error switching modules". I am missing all the options to import photos. When I try to click on lightroom preferences at the top of the screen nothing pops up.  It seems like i am missing some of the options and the navigation pane. Do i need to update something else to be able to import photos and click between module pages?

    55AB,
    It appears the error message you have is an ink system failure error message. While it looks like your printer needs to be services there is also a thread with some suggestions out there with some results for this same issue. I have linked this thread this post. You will want to look at message 16 and 17 for what seems to be a resolution for your same printer. Hope this helps.
    http://h30434.www3.hp.com/t5/Other-Printing-Questions/error-message-0xc19a0035-quot-ink-system-failu...
    If I helped you at all it would be great if you clicked the blue kudos star!
    If I solved your post please mark it as solved to help others.
    I'm a printer tech with HP.

  • Need help deciding on which Mac to get? Macbook Air vs Macbook Pro Retina

    Hey im new here, sorry if these questions get repetitive but im investing a lot of money and dont have much knowledge on computers so i came here. So my options are :
    Option 1
    13 inch Macbook Air
    1.7GHz Dual-Core Intel Core i7, Turbo Boost up to 3.3GHz
    8GB 1600MHz LPDDR3 SDRAM
    128GB PCIe-based flash storage
    $1249.00
    Option 2
    13 inch Macbook Air
    1.4GHz Dual-Core Intel Core i5, Turbo Boost up to 2.7GHz
    8GB 1600MHz LPDDR3 SDRAM
    256GB PCIe-based Flash Storage
    $1299.00
    Option 3
    13 in Macbook pro Retina
    2.4GHz dual-core Intel Core i5
    Turbo Boost up to 2.9GHz
    4GB 1600MHz memory
    128GB PCIe-based flash storage1
    Intel Iris Graphics
    $1299.00
    here is how i find myself as a computer user...
    i use a computer everyday as a college student... a lot of microsoft programs and internet usage...
    occasionally i use netflix but i find myself hooking it up to a tv if i watch or stream off my comp
    here is my issue why do i need a retina if i can watch most things on tv now that they have internet integrated such as netflix youtube.
    so what would be more useful more hard drive space with 8gb of ram or less harddrive space with faster processor
    thank you in advance as this is my first post

    I had the same question as I was starting grad school and my old MacBook Pro was just getting too tired and slow.
    I visited the Apple store and spoke with four different employees and they each came to the same conclusion- separately- that the Pro was the way to go.
    If you upgrade your flash like you mentioned you might want to do with the Air that's great, but with the pro upgrading your flash automatically upgrades your RAM as well, doubling you from 4 to 8. I kept going back and forth over what to do because the difference in price was significant, but ultimately more RAM makes for a much faster machine and it will work better, longer. It would most likely buy me another year or more of a well working machine over the Air.
    Cost was definitely a factor me as well, but I was able to use the Education pricing, and I chose to buy refurbished.
    Also, in terms of portability, the difference in weight is only half a pound. My roommate has the Air and I honestly feel no difference when I'm carrying hers or mine in my school bag. I'm really happy that I went with the Pro with Retina because even though I probably don't use half of the amazing features available on it, I always have the option to. Plus, not being much of a techie I have so much flash storage that I don't need to bother with my external hard drive anymore other than to backup my files. Really, really glad that I listened to the Geniuses!

Maybe you are looking for