Need Help: Identifying RBAC Job Roles

Hi,
My company has developed a solution that helps the deployment of RBAC in Enterprise User Administation systems, i.e., the kind of software that would allow you to centally control, and automate the provisioning of privileges to users across the enterprise.
The solution esemtially reverse engineers the existing (legacy) privileges, identifying groups of users that have a common subset of privileges. These become role candidates, which are then refined and edited using another set of tools. It is a breakthrough in this area because otherwise it is intractable (or at least prohibitively expensive) to identify what the roles should be. (if the roles were not defined to begin with, then the only alternative is really to re-engineer IT privileges across the organization).
My question is whether a variation on this software can be useful for deployments of (1) Directories; (2) Portals; (3) ID Mgmt, etc.? If so, how would you envision this working?
Thanks so much,
Dr. Ron Rymon
Eurekify Ltd.
[email protected]
http://www.eurekify.com

Hi,
You can view the OCS accounts for each Server with the following steps:
Open the Office Communications Server 2007 R2 snap-in.
In the console tree, expand the forest node, and then navigate to the Standard Edition server or Enterprise pool.
Expand the pool name for the Enterprise pool or the Standard Edition server, and then expand Users.
If you want to migration from OCS 2007 R2 to Lync Server 2013, you can refer to the link below:
http://technet.microsoft.com/en-us/library/jj205375.aspx
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Similar Messages

I need help identifying an old Macintosh game: it was a painting game where you rode a roller coaster to an art museum and you got to pick what kind of art work you were going to make. This was the early 90's and I've been trying to hunt it down

I need help identifying an old Macintosh game: it was a painting game where you rode a roller coaster to an art museum and you got to pick what kind of art work you were going to make. It was animated, 2D i believe. This was the early 90's and I've been trying to hunt it down. I think there was some kind of animal in it, a giraffe maybe?

Could you be thinking of Microsoft Home's "Fine Artist" for Macintosh, as shown in this Amazon.com listing? This program was bundled with the Performa series of Macs during the mid-90s.

I need help identifying which Magsafe Power Adapter I need for my Macbook Pro Model A1398, EMC 2673?

I need help identifying which Magsafe Power Adapter I need for my Macbook Pro Model A1398, EMC 2673?

Provided the computer-end fits, you are free to use one with a HIGHER Wattage rating. No damage whatsoever will be done to any component, but it will likely run cooler (but may be slightly heavier).
If you use one with too LOW a Wattage rating, you will not be able to charge and run at the same time, and your computer's top speed (for its most intensive computations) will be limited.

MSI P67A-G43 (B3) - Need help identifying this postcode

Need help identifying this postcode:
CPU:i7-2600k
Mobo:MSI P67A-G43 (B3)
PSU: Corsair 750w
GPU isn't the problem since I replaced it and still get this postcode. RAM isn't the problem since I've tried four different sticks one at a time in each slot and still get the postcode. Getting no live video from the GTX580 and no onboard video. I think either the mobo or the CPU is the problem, don't want to have to send both in for RMA so if anyone can help me identify the postcode that'd be great.

Hey Ctrl
Well I happen to have the same beep code on my motherboard (P67A-C43 B3), after trying different suggestions from the MSI forum users and MSI technical support I ended up RMA(ing) my motherboard.
You can try resetting the CMOS, by flipping the battery and leaving it like that for 5 minutes and putting it back to its original side. I highly doubt it is your cpu. Like anybody in the forum might suggest, try different components which appears you already did. I doubt your corsair is faulty. CPU and motherboard are your best bet that are faulty, and i highly doubt that it is the CPU because for there to find another person (you) that had the same problem as me since last friday (RMA board yesterday, wednesday) I find it highly unlikely.

Need Help Regarding Users and Roles

Hi,
I have Created a role with Password authentication and in that role only object privilege (SELECT TABLE) and System Privilige (CREATE SESSION)
Now I created user name abbasi and add above role to it and make that role as its default role.
Now when I connect above user from SQL*Plus its Connected.
I want to know since for there is Password Authentication then why during the session databse server not authenticate for role password.
Actually I want to know real usage of password autheticated role.
Regards.
D.abbasi

See the following demo
SQL> conn aman/aman
Connected.
SQL> create user test identified by test;
User created.
SQL> create role test_role ;
Role created.
SQL> grant create session to test_role;
Grant succeeded.
SQL> create role dangerous identified by danger;
Role created.
SQL> grant drop any table to dangerous;
Grant succeeded.
SQL> grant dangerous, test_role to test;
Grant succeeded.
SQL> alter user test default role test_role;
User altered.
SQL> conn test/test
Connected.
SQL> select * from session_roles;
ROLE
TEST_ROLE
SQL> select * from session_privs;
PRIVILEGE
CREATE SESSION
SQL> set role dangerous;
set role dangerous
ERROR at line 1:
ORA-01979: missing or invalid password for role 'DANGEROUS'
SQL> set role dangerous identified by danger;
Role set.
SQL> select * from session_roles;
ROLE
DANGEROUS
SQL> select * from session_privs;
PRIVILEGE
DROP ANY TABLEYou should not make the roles haivng the passwords as the default roles. Let them be there but not as the default roles. These roles can be enabled by the end user when he needs that. In my example, I have made a user TEST, two roles, TEST_ROLE, Dangerous. Dangerous is password protected and contains a priv drop any table. I have made TESt_role as the default role for the user and it becomes active. But for the dangerous,I need to supply the paswword. If I don't , I get an error like I have shown inthe example.
HTH
Aman....

Need help identifying controller information in hyperdraw

Hello,
Sorry if this is a dumb questions, but I'm in the middle of a project and need help ASAP. In one of my tracks (Real Guitar) there is some form of controller information present at the start of the track and I have no clue what it is! Is there a preference/key command that shows all data in hyperdraw, and then lets you select it (similar to the way the matrix editor works if you double click in the background, and then click on a specific note?)
Thanks in advance for any help you can provide!

Jonathan,
I use the method that Jim suggested. I have the "H" key programmed for autodefine. (I've also got another two keys programmed to simply turn hyperdraw on and off for the selected region(s)). Autodefine is very cool. If there are, say, 4 different controllers in the track, hitting H the first time will show you the lowest-numbered controller; hit it again and it shows you the next higher number controller, and so on. The controller number is displayed in the lower LH area of the hyperdraw display for each region.
If a track contains controller information for multiple channels, you'll see two numeric values in the lower LH corner -- the controller number and MIDI channel for that controller, separated by a comma.

Need help identifying servers and autoconfiguration scripts

I have just started a new job and the previous admin left no info. We are preparing for a migration to Lync and Exchange 2013 upgrade
I noticed that the OCS 2007 R2 client says automatic configuration in the advanced server options
I need to know how to locate the autoconfiguration script and which server my user is on.
I have looked at both 2007 OCS servers but do not see my user and suspect there is another server with users on it.
Where do I look? the autoconfig script should help me find what server , correct?
Thanks in advance...
David Sheetz MCP

Hi,
You can view the OCS accounts for each Server with the following steps:
Open the Office Communications Server 2007 R2 snap-in.
In the console tree, expand the forest node, and then navigate to the Standard Edition server or Enterprise pool.
Expand the pool name for the Enterprise pool or the Standard Edition server, and then expand Users.
If you want to migration from OCS 2007 R2 to Lync Server 2013, you can refer to the link below:
http://technet.microsoft.com/en-us/library/jj205375.aspx
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Need help identifying the application responsible for an insert...

Hi,
I'm a MSSQL guy and Oracle is still a bit mysterious to me. I'm looking for some assistance tracking down the application in an environment which is responsible for particular inserts.
For example, suppose I have 10 different programs running and inserting values to a DB. I need to know which one of them inserts a "0" in a particular column.
I found a trigger which will tell me the user, unfortunately these programs use a shared credential so that doesn't help me.... here's what I've got:
CREATE OR REPLACE TRIGGER check_for_zero_insert
AFTER INSERT
ON DATA_TABLE_0001
FOR EACH ROW
DECLARE
v_username varchar2(10);
BEGIN
-- Find username of person performing the INSERT into the table
SELECT user INTO v_username
FROM dual;
-- Insert record into audit table
INSERT INTO audit_table
( samplevalue
sampletime,
username )
VALUES
( :sampletime,
:samplevalue
v_username );
END;
But again, username won't help me, I need the originating process if at all possible (either an executable name, PID, or something to identify the specific application on the other side.)

use this in your trigger
select sys_context('USERENV','OS_USER') ||'-' ||user into v_username from dual;
You might need to increase the v_username data type length.
Thanks,
GPU

Need help identifying a font

I've been asked to finalize this web site
http://www.ru308.com/
I want to make a clean version of the logo, without the
grainy background.
Can anyone help me identify the font used for the company
name?
RUSSELL INDUSTRIES, INC.
Or suggest a good resource that can help me identify the
font?
Thanks in advance
Steve
Adobe Community Expert: Authorware, Flash Mobile and Devices
http://www.magnoliamultimedia.com
You need to go to MAX -
http://adobemax2007.com/na/

My Fonts - What the Font? A great resource!
http://www.myfonts.com/WhatTheFont/
--Nancy O.
Alt-Web Design & Publishing
www.alt-web.com
"Steve Howard" <[email protected]> wrote in
message
news:f95ijg$7ra$[email protected]..
> I've been asked to finalize this web site
>
>
http://www.ru308.com/
>
> I want to make a clean version of the logo, without the
grainy background.
> Can anyone help me identify the font used for the
company name?
>
> RUSSELL INDUSTRIES, INC.
>
>
> Or suggest a good resource that can help me identify the
font?
>
> Thanks in advance
>
> Steve
>
> --
> Adobe Community Expert: Authorware, Flash Mobile and
Devices
>
http://www.magnoliamultimedia.com
>
> You need to go to MAX -
http://adobemax2007.com/na/
>

Need help identifying model of a Treo

I rarely need a PDA, so I didn't replace the old M105 that died. A friend replaced a Treo she'd been using and gave it to me, but all I got was the device itself, the charger, and the USB cable. I'm having trouble getting it to load my contacts and calendar (for some reason it did transfer four items in a ToDo list!), and I can't even figure out what model it is, let alone can I find a user's manual. It is definitely just a PDA and not a phone.
On the back of the Treo is the following identification:
GMHED248700FX
What is it?! And what version of Palm software is required in order to get it to sync with the Palm software on my computer? I thought at first it might be a model 700FX, but I can't find that model listed anywhere on the Palm site, so clearly that isn't it. Is there any other way to identify it?
Thank you for any help!
Post relates to: None

Thank you! That certainly seems to be the one I have, and the age isn't important for what I need. Now, though, that leads to the next issue, which is that I can't sync my contacts and calendar, although I think I've figured out why for myself. Still, it generates another question.
I am currently using Palm v 4.2.1 on my desktop (Mac 10.4.11) I bet it's too new, isn't it? Is it going to be possible for me to back off to Palm 4.0 without losing the information that's currently stored in 4.2.1? I don't mind installing an older version of the software (and I found the download), but if it means losing my information, I'll just pass this free Treo on to some other unsuspecting person.

Need help identifying problem (lockup/freezing in Warcraft III & CS)

my macbook pro:
Model Name: MacBook Pro 15"
Model Identifier: MacBookPro1,1
Processor Name: Intel Core Duo
Processor Speed: 2 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache (per processor): 2 MB
Memory: 1 GB
Bus Speed: 667 MHz
Boot ROM Version: MBP11.0055.B08
SMC Version: 1.2f10
Serial Number: W862318KVWY
Sudden Motion Sensor:
State: Enabled
It freezes and has black screens during games in which apple Q and force quit doesn't work. I would need to restart the comp. when it freezes the sound would stutter, repeating whatever the game had playing.
things I tried but the macbook pro still froze:
running the game off USB storage device(so i think HD is fine)
wiping HD and reinstalling OS, updating everything and playing it on both USB and the installation of game (not 3rd party apps)
opening the macbook pro and cleaning out the dust (didn't take anything out, just blew dust off)
resetting RAM with apple options P R
took RAM out and put it back in
ran apple hardware test (everything was okay)
running a different game (Counter-Strike on CrossOver and still froze)
Disk Warrior 4 (only minor repairs and it froze in the test game after i ran DW4)
booting system from an external and running the game from USB
things to note:
although sometimes when it freezes, the temperatures are really high - even with fan control (70-80C) but, i've reproduced the lock up with the temperatures at 60C, so i don't think its a heat problem (thermal paste and whatnot)
sometimes in safari, quicktime, itunes, or just on desktop picture i would see a single, horizontal, 1 pixel-height distorted line running across the screen, which i can take screenshots of. no idea what's causing it but it could have some relation with the freezing/lockups
some days it will run without problems for the entire day, just to see lockups the very next day. I think it could be random.
help please..

=\ no one....

Need help in creating job

Hi Experts,
I am trying to schedule a job using DBMS_SCHEDULER.
The job has to start on SATURDAY 12:00 midnight and should run every on SATURDAY 12:00 midnight.
Even if I create the job on MONDAY first it should start on coming SATURDAY and following SATURDAYs.
But I am getting the below error.
ORA-27452: BEGIN APPS_GLOBAL.POPULATE_TARGET144('APPS_XX','APPS_BE',5959); end; is an invalid name for a database object.
ORA-06512: at "SYS.DBMS_ISCHED", line 124
ORA-06512: at "SYS.DBMS_SCHEDULER", line 271
ORA-06512: at line 2The Job script is
BEGIN
   DBMS_SCHEDULER.create_job (
      job_name          => 'TEST_RAM',
      job_type          => 'STORED_PROCEDURE',
      job_action        => 'BEGIN APPS_GLOBAL.POPULATE_TARGET144(''APPS_XX'',''APPS_BE'',5959); END;',
      start_date        => TRUNC(SYSDATE),
      repeat_interval   => 'FREQ=DAILY; BYDAY=SAT; BYHOUR=24;',
      comments          => 'Job scheduler'
END;Please help me on logic and as we as on the error.
Thanks in advance.

I have written the following code and I am able to create the job.
DECLARE
   n1 VARCHAR2(20) :='APPS_XX';
   n2 VARCHAR2(20) :='APPS_BE';
   n3   NUMBER := 5959;
BEGIN
   DBMS_SCHEDULER.CREATE_JOB (
      'TEST_RAM',
      'STORED_PROCEDURE',
      job_action            => 'APPS_GLOBAL.POPULATE_TARGET144',
      number_of_arguments   => 3,
      start_date            => TRUNC(SYSTIMESTAMP),
      repeat_interval       => 'FREQ=WEEKLY;BYDAY=SAT',
      enabled               => FALSE,
      comments          => 'POPULATE_TARGET144 procedure scheduler'
   DBMS_SCHEDULER.SET_JOB_ARGUMENT_VALUE (job_name            => 'TEST_RAM',
                                          argument_position   => 1,
                                          argument_value      => n1);
   DBMS_SCHEDULER.SET_JOB_ARGUMENT_VALUE (job_name            => 'TEST_RAM',
                                          argument_position   => 2,
                                          argument_value      => n2);
   DBMS_SCHEDULER.SET_JOB_ARGUMENT_VALUE (job_name            => 'TEST_RAM',
                                          argument_position   => 3,
                                          argument_value      => n3);
   DBMS_SCHEDULER.ENABLE ('TEST_RAM');
   DBMS_SCHEDULER.RUN_JOB ('TEST_RAM');
END;
/After creating it should I do any thing?
Is there any difference between creating a job using jot_type='PLSQL_BLOCK' and jot_type='STORED_PROCEDURE' ?
Please help me thanks.

I need help identifying and removing annoying gadget that shows all open windows and applications when I mouse over a corner.

It seemed like a good idea at the time. Some time ago I installed a gadget (doesn't seem to be an item in my Applications folder) which, when I mouse-over the lower-left corner of my screen, brings up a screen showing reduced-size versions of all open application windows and Finder windows. I've tried to identify what it is, and where it is located, so I can remove it, but to no avail.
I'd really appreciate any help getting rid of this thing. Thanks!

Hi Paul,
Check System Preferences>Accounts (Users & Groups in later OSX versions)>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Check the System Preferences>Keyboard>Keyboard Shortcuts.

Need help identifying effect in RH8

Hello!
I recently installed RH8. I was looking at the Help (Adobe
Help Viewer 2) and found a cool effect in the Help that I would
like to use in my project, but I'm not sure what it is. It looks a
bit like a DHTML drop-down hotspot, except the hotspot is removed
when clicked.
Here's how it works: There is a hotspot phrase ("View full
size graphic") and a small graphic underneath. When the phrase is
clicked, the phrase and small graphic disappears and is replaced by
another hotspot ("View small graphic") and the large graphic. So
you can click back & forth, replacing the hotspot & graphic
displayed each time.
This effect can be found in the Adobe Help Viewer 2, under
Exploring the workspace>Workspace overview.
I'm not an expert, but when I've used the DHTML drop-down
hotspot, the hotspot remains on the window when clicked. I also
played around with the trigger/target, but I couldn't make that fit
the effect either, although maybe I'm not configuring it properly?
Hope somebody can help me.
Thanks!

Hi all
To add to what Colum said, I saw the post last night and
quickly looked at the page. Here is my own observation after
picking things apart.
Firstly, we all need to be aware that while the page is
presented using Adobe AIR, it's not part of AIR. Think of the AIR
help viewer as being similar to the browser, but specialized. I
believe in this case, it's kind of like a hybrid between the CHM
viewer and a Web Browser. Like the CHM viewer, it's a specialized
application for displaying content. But like a Web Browser, that
content simply exists as a collection of pages on a server. For
example, I can view the same page in my FireFox web browser using
the link below:
Click
here to view
After picking the page apart, I determined that some
JavaScript is being used to provide that effect. And it's quite a
neat one! The JavaScript function seems to be titled
showHideImage and is found in a linked JavaScript file
called
help.js.
So here's the kicker. I do not believe the page in question
was created using RoboHelp. If it was, maybe this is a preview of
coming attractions?
If not, I would think that at least that function
should be added to RoboHelp among its many DHTML effects.
Click
here to view the WishForm/Bug Reporting Form
Cheers... Rick

Need help identifying SB drivers for Windows 7?

/? Hi
I helped a friend upgrade his computer from XP to Windows 7 Home Premium 32 bit.
Everything is working fine except his sound. ?I can not find and install drivers for the sound card.
We had the same thing with his printer but I was able to download the drivers and install them which solved the problem. ?I think the same thing is true of the sound card.
He did not know what kind of sound card he had in his Dell E520 computer and he could not find any documentation or driver disk.
I finally used his Service Tag to get his Build Sheet from Dell
His audio is identified as "Card, Multi-media, Audio, SB0467"
I'm pretty sure this is a Sound Blaster car but haven't been able to find specific drivers for it.
Can anyone tell me what kind of card this is and steer me to a location where I can download Windows 7 compatible drivers for it.
Thanks for the help....
Mike

Dell OEM version of the Xtreme Music. These,
http://forums.creative.com/t5/Sound-Blaster/SB-X-Fi-Series-Support-Pack-2-0-05-5-2009/td-p/527485
should work without too much fuss.

Need Help: Identifying RBAC Job Roles

Similar Messages

Maybe you are looking for