Need help if you run Windows 7 and McAfee

As I posted to other thread, I was not able to do auto-updating of CS5 since CS5 was installed.  The problem seems to be related to firewall settings.
I am running windows 7 and McAfee Security Center.   I turned off Firwall from McAfee.  But I am getting the same error.
As shown in the top figure, it show Firewall was turned off by McAfee (see red arrows).
When I opened windows firewall, it described that these settings are managed by McAfee (see below).
What I see is that Under domain Profile, windows firewall is off (red arrow).  But Firewall in both  private and public profiles are on (see blue arrows in the above figure).
What I want is to turn off McAfee firewall in order to perform CS5 autoupdating.
Could someone help me with my problem?  
Hummer

What exactly is a firewall:
at its basic level, a firewall is a barrior that is designed to keep threats out.
Some firewalls do a better job then others but ultimately its the "people" behind the firewall that is responsable for security.
Many firewalls have both incoming and outgoing rules to help keep PC's safe.
McAfee intigrates into the operating system, thats why it changes the windows firewall rules and why you see the windows firewall is no longer manageable by normal means. it may even hook in a use portions of the windows firewall and expends windows built in security from that point.
Before you attempt to uninstall it, I highly recommend you put everything back to its normal running state, then after uninstalling from add remove programs also use their removal tool to insure all registry enteries are also removed. This "should" put everything back to factory default settings for windows firewall rules.
http://service.mcafee.com/FAQDocument.aspx?id=TS100507
I am of the opinion that McAfee, in its quest to secure its "customers", customers PC's with the least amont of end user interaction, it became blind to the fact that sometimes you need to reset everything back to factory default and simply start over, It may even be there but its not easly found or wasn't last i used it. Even their virus scanner is difficult to disarm once activated. They hook into many aspects of the operating system in an effort to keep you safe weather you like it or not.
An old saying comes to mind, Freedom comes with a Price.
I'll not say McAfee software is bad, I think they lost touch with the end user is all, They are more interested in the dollar then the end user. The ISP's line their pockets and are their real customers, you didn't really think the software was free did you? What the big ISP's want in there for security is what they tend to put in there. Almost all ISP's in the states provide free McAfee or Nortons security with their service plans and every new PC has either one in there "free"
I would personally try to uninstall McAfee completly, if that fixes the issue you can always put it back if you choose or some other security suite.

Similar Messages

  • Help if you can, student and need phone now.

    Hi, yesterday morning when I unplugged my phone from the wall charger I noticed there were too small black oval shapes on the top center of my screen. Being late for school I didn't really mind it.. Through out the day do, it's as if it extended to my right side of the screen and to my left. There are still two black oval circles on the top, now one side of the screen flips from different colors and lines and the other flips from white to black. I can't see anything!!
    How can i fix this? Will blackberry cover me for this? I run my hand over the screen and I can't feel any scratches or bumps or marks. I dropped it once the first time I got it, but it was less than a foot, and nothing happened to it. I'm with telus and in canada.. Any and all help is appreciated.
    Thank you. 

    Perhaps i was not really good with my language.
    I don't speak english as an english.
    I m' french and i don't know why you send me to this
    adresse!
    My question was not a joke. It just concerned image
    manipulation.
    I was just looking for a programm with a threshold
    exemple.(i found it!)
    Sorry not to be understood.The poster cknelsen was telling you that your subject line "Need help if you can." is not going to draw the attention of people who may be able to answer your questions. It does not tell the viewer anything. Only someone who is curious and has time on his hands will look at your question.
    Your initial post did not really describe the problem and your question. You don't provide the reader with specifics.
    I am explaining what I think cknelsen meant because we probably is trying to be helpful but the language barrier is getting in the way.
    I suggest you read the link. Be more specific in telling the reader what you need help with. Repost your question with a subject like "Need help with modifications to a BufferedImage object".
    Good luck

  • Hello, I'm using the same apple id on my Ipad and Iphone, and anything i do and my ipad reflects on my iphone. if i download an app on my iphone it also downloads on my ipad. Can i stop this from happening. i need help. thank you.

    hello, I'm using the same apple id on my Ipad and Iphone, and anything i do and my ipad reflects on my iphone. if i download an app on my iphone it also downloads on my ipad. Can i stop this from happening. i need help. thank you.

    Yes, under the Settings for the store, you can turn off the auto download for purchases, that way if you purchase an app on another device it will not automatically download on that device.  You would need to do this on both your iPad and iPhone.

  • I need help installing flash on windows 8

    I need help installing flash on windows 8

    Chris… No I was using the desktop version, I cannot stand the M version, guess it would be nice if I had  a touch screen..…when I finally got my computer to download the Acrobat Standard XI program, not sure how it worked, but I think it had something to do with Windows 8 not allowing itself to update all my apps and programs, even though my computer was set to automatically update any Windows/Microsoft updates…finally I got my Windows updates done, it downloaded like 36 files…and then I had to restart,(which also could have been playing a factor)…so finally got the program downloaded on Windows 8…but then I tried to run the new program and it says install serial #...so I assume that it was asking for the serial # for the Acrobat Standard XI…finally after googling the web, I found somebody that said try your older serial # from the previous program, and when I did this it finally works.. you would think with a brand new Windows computer I would have no problem installing Windows Updates…somebody needs to make a sticky about this, I am sure I am not the only one haiving this problem..
    Thanks,

  • Need help with my iPhone 5 and my Macbook Pro.

    Need help with my iPhone 5 and my Macbook Pro.  I was purchased some music on itunes at my mac. Some reason I deleted those music from both on Mac and iPhone 5.  Today, I went to my iPhone iTunes store inside of iCloud to redownload my puchased. But those song won't able to sync back to my iTunes library on my Mac.  Can anyone help me with that ??....
    iPhone 5, iOS 6.0.1

    You've posted to the iTunes Match forum, which your question does not appear to be related to. You'll get better support responses by posting to either the iTunes for Mac or iTunes for Windows forum. Which ever is more appropriate for your situation.

  • Can you run windows on a mac without a partition

    i want to run windows on my mac but i do not want to have a partition.
    is there any way to run windows without a partition??????

    william12frommagdalena wrote:
    i want to run windows on my mac but i do not want to have a partition.
    is there any way to run windows without a partition??????
    Yes,
    You can run Windows and a few programs at the same time as OS X in a window if your willing to take a performance penalty, no heavy duty 3D games or heavy CPU needs.
    See this thread.
    https://discussions.apple.com/thread/3655715?tstart=0

  • Lost all email gmail deleted by mistake need help thank you

    lost all email gmail messages deleted by mistake need help thank you.

    Mail 2.x doesn’t store mail in standard mbox format. The only way you might find Mail messages in a “recovered” mbox file is if it was a Mail 1.x file that Mail 2.x left there after the conversion to the new *.emlx format when you upgraded from Mac OS X 10.3 or earlier to Mac OS X 10.4.
    If you’re running Mac OS X 10.4 (Tiger) and don’t have a backup, what you should have tried to recover are as many *.emlx files as possible. Data Rescue II may be able to do that, but the documentation doesn’t say so. The only data recovery utility that I know for sure can currently recover deleted *.emlx files is FileSalvage.
    That said, you may still try to import those mbox files as Other (not as Mail for Mac OS X), and hope that they don’t contain garbage that causes Mail to crash — you may look at their contents with a text editor first to check whether there are actually any emails there.
    Beware, however, that anything you do with the computer may cause the deleted *.emlx files to be overwritten if you don’t try to recover them first.

  • I have a 2008 Mac Book Pro partitioned running windows and are running out of drive space. Can I upgrade hard drive for more capacity?

    I have a 2008 Mac Book Pro partitioned running windows and are running out of drive space. Can I upgrade hard drive for more capacity? I purchased a faster drive initially, but has 200 GB capacity. I am running out of room and would like to upgrade for more space if possible.
    Can anyone suggest an alternative?

    You don't need to partition your drive to run Fusion, only if you want to run Bootcamp.
    If you have space on your Windows partition, I would suggest you backup your Windows partition, and then, delete the partition using Disk Utility.
    You can now restore your virtual machine to a single volume or repartition if you prefer.
    I would consider upgrading to a unibody MBP (used, refurbished will do) just to be able to access the HD. Opening the pre-unibody MBP is not something you would want to do.

  • Would like to trace my ipod touch because I was robbed. I would find it please. need help from you guys. Not because I am able to get another. Thank you.

    would like to trace my ipod touch because I was robbed. I would find it please. need help from you guys. Not because I am able to get another. Thank you.

    - If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
    iCloud: Find My iPhone
    - You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
    - If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
    - Change the passwords for all accounts used on the iPod and report to police
    - There is no way to prevent someone from restoring the iPod (it erases it) using it unless you had iOS 7 on the device. With iOS 7, one has to enter the Apple ID and password to restore the device.
    - Apple will do nothing without a court order                                                        
    Reporting a lost or stolen Apple product                                               
    - iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

  • Hello I Download Adobe Photoshop CC 2014 Last Night i INSTALLED it But it Crashes in 30-40 Sec After i Launch the Product Without Any Error Message I Need Help Can You Resolve This Problem i Tried Creative Cloud Sign Out Nd Sign iN But iT DidnT ReSolve My

    Hello I Download Adobe Photoshop CC 2014 Last Night
     i INSTALLED it But it Crashes in 30-40 Sec After i Launch the Product Without Any Error Message
    I Need Help Can You Resolve This Problem

    Lotfi are you receiving any error messages during the installation?  I would recommend reviewing your installation logs for errors.  Please see Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html for information on how to locate and interpret your installation log files.  You are welcome to post any specific errors you discover to this discussion.

  • TS4268 I need help getting my face time and imessage to work.

    I need help getting my face time and imessage to work. It is saying wating for activation. I just got my iphone 5 2 days ago. I have reset it from the phone and from itunes on the computer, made sure I'm attached to wifi.

    The 3 basic troubleshooting steps are these in order: 1. Restart your iphone  2.  Reset your settings/iphone  3.  Restore your iphone.  Since your iphone is only a couple of days old, you should backup your device before restoring.  If you don't have anything on your iphone that you care to lose, then simply restoring without a backup is fine.  A quick reset of pressing the sleep/wake button (top of iphone) and your home button simultaneously and holding it until the silver Apple logo appears. 

  • I have a macbook pro with OSX 10.5.8.  How do I upgrade to Mountain Lion when it is available?  I need to upgrade to run quickbooks and other apps

    I have a macbook pro with OSX 10.5.8.  How do I upgrade to Mountain Lion when it is available?  I need to upgrade to run quickbooks and other apps

    First, you need Snow Leopard (10.6): http://store.apple.com/us/product/MC573Z/A. Then you use Software Update to update it to 10.6.8. When Mountain Lion (10.8) comes out, find it in the Mac App Store.

  • I am john and I need help downloading a progmmme yesterday and wanted to finish downloading open it and I am not told me that the program was shut down unexpectedly and restart ponia not opened and went back to download it and not opened my back probe to

    i am john and I need help downloading a progmmme yesterday and wanted to finish downloading open it and I am not told me that the program was shut down unexpectedly and restart ponia not opened and went back to download it and not opened my back probe to turn off the computer and there was no case

    i am john and I need your help yesterday bought a program called DJAY when I finish the download and got an error opened and I saw him there was no case to install and thank you for your help anyway

  • I need help removing CS3 from Windows 7 so I can reinstall

    I need help removing CS3 from Windows 7 so I can reinstall

    Before trying to remove try re-installing CS3 right on top of the current install.  Often re-installing Photoshop on top of itself fixes the install.  If it does be sure to apply the cs3 updates.
    Download Adobe CS4 and CS3 Free Trials Here (incl. After Effects) | ProDesignTools
    your product key can be retrieved from here https://www.adobe.com/account/my-products-services.html
    use these links for the updates.
    Adobe - Photoshop : For Macintosh
    Adobe - Photoshop : For Windows

  • Typesize too small at screen; am running windows and using godaddy

    typesize too small at screen; am running windows and using godaddy

    See this: <br />
    https://support.mozilla.com/en-US/kb/Page+Zoom

Maybe you are looking for

  • I forgot my hidden file manager password,How can i get back my files

    I forgot Hidden file manager password,how can i get back my my data

  • LV 8.2 Config File with Enum bug

    Please refer to attachment. Set the Enum and run the VI. The Enum is converted into string and then saved into a config file. The file is immediately read and the key is converted back to enum. It works fine until you choose index 32 in the enum. Eit

  • How to determine value of PO account assignment item

    G'Day, Simple question: I'm after a cost breakdown of a PO at account assignment level. For this I need to determine the value of an account assignment item in a consistent manner. e.g. if a PO item has an account assignment split across multiple cos

  • CSS and a Sorry Server

    I have been trying to get my CSS 11506 to redirct to a Sorry Server when our content servers go offline. We thought that we had it working, but after some downtime it turned out that our configuration did not work. After extensive reading I can't fig

  • Digitizing DV from Canon GL-1 camera

    FCP Studio does not see my Canon GL-1 camera. iMovie DOES see the camera, so it's not a connection problem. FCP will see my Canon HDV camera (vixia HV30), so it's not FCP. It's just a settings issue within FCP, I assume -- but I can't see where in th