Need help in adding a network printer on my MacBook

I am trying to add a network printer on my MacBook. Please help.

Sorry I can't help but I would also be interested in any replies!

Similar Messages

Need help connecting a windows network printer to my Mac (Xerox Phaser 3600) over a windows home network

Need help connecting a windows network printer to my Mac (Xerox Phaser 3600) over a windows home network.
My Mac runs lion and the windows desktop runs Windows XP
I have tried for a few hours or so to connect my mac to this printer over a home network.
For your information it does work when connected directly to my mac using a USB Cable.
If there is no soultion could I have help getting the drivers for a Dell All-in-One Photo 926

In most cases you can connect to the Windows shared printer from the Mac. But there is a dependence on the Mac driver being compatible. For many consumer inkjets, the vendor created driver cannot be used for this type of connection so you need to look at alternative drivers, such as Gutenprint or PrintFab. If you can tell us which brand and model of printer you have shared from Windows then we can answer your question with the preferred procedure on the Mac.

I need an basic model hp network printer within rs.10,000/ and it should support windows 7 64bit

i need an basic model hp network printer within rs.10,000/ and it should support windows 7 64bit

HI what does rs.10.000 mean?
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Although I work for HP my posts and replies are my own
Please mark the post that solves your problem as "Accepted Solution"

I need an basic model hp network printer within rs.10,000/

i need an basic model hp network printer within rs.10,000/

HI what does rs.10.000 mean?
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Although I work for HP my posts and replies are my own
Please mark the post that solves your problem as "Accepted Solution"

Adding a network printer

how do i connect a network printer to my Macbook pro?

Thanks for responding. Yeah I have checked that. I can actually get as far as clicking the add printer, then selecting wireless, i then slect the printer that I want which is listed then tells me it cannot find the correct drivers. I even tried installing the original software disk to the printer and it still told me that it cannot find the correct drivers and is not compatable. I did this very same thing to my daughters laptop which has vista and it worked just fine. Her version of vista is a littile different. Is it possible that certain printers are not compatable with certain vista programs. I have never heard of that though. Thank You again for responding. I will look forward to any other help you could give me.

Need help with adding emoji to my hubby's phone don't see it when I click on the keyboard tab

I need help with adding emoji to my hubby's iPhone when I go to settings then the keyboard tab it's not there

I did that bad it's not there and doesn't give me to option to click on it

I need help transferring Bootcamp (Windows XP) from my old Macbook Pro to the new one. How do I make bootable clone of Bootcamp?

Hi I just got a new MacBook Pro I need help transferring Bootcamp (Windows XP) from my old Macbook Pro to my new Macbook Pro Mac OS X 10.7.4 2.6 Ghz Intel Core 17. How do I make bootable clone of Bootcamp?

you can't just move XP even if you took the hard drive and have Windows boot and function.
Apparently there are Windows tools to sanitize the OS and strip all the motherboard drivers and services.
Time to get a supported OS. Don't want to pay, then use 8 for the time until it goes on sale.
There are no drivers for even Vista on 2011 and later Macs.

I need help I can connect my printer to my router to use my printers with my mini I pad

I need help I have been trying for hours to connect my new e printer to my router ,to use with my ipad mini

Hi,
The simplest way to print wirelessly from your ipad is to download the HP eprint app and ensure that both your printer and device are connected to the same wifi network - once this is complete, you'll be bale to print wirelessly from within the eprint app.
Alternatively, you can use the wireless direct funtion of your printer by turining on the wireless button on the front of the printer. This allows the printer generate it's own wifi singal that you can connect to through any wireless device. To find the wireless password, simply hold down the wireless direct button for more than 3 secs and it will print the password on plain paper (make sure paper is loaded).
"Although I work for HP, I'm speaking for myself and not on behalf of HP"
"Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

Adding my network printer to my new mackbook pro

I am trying to add our networked Canon CLC ir C3220 printer to my machine.
Tried adding an IP printer with the printers IP address, choosing both Line Printer Daemon - LPD and Internet Printing Protocol - IPP.
Cant get it to work at all, any ideas what I do?

If your C3220 has an imagePASS C2 print controller then the LPD queue name needs to be print and it must be entered in lower case.
If it is not using the imagePASS then try using IP > HP Jetdirect for the queue. This does not require a queue name.

Adding a network printer to a Vista Home Premium Edition 64-bit laptop

I have a Deskjet 5150 printer conntected to a desktop running on Windows XP. It is set up as a shared network printer. When I attempt to add this networked printer to my laptop has Vista Home Premium Edition 64-bit OS, I get a message that states "The server for the 'hp deskjet 5100 series' printer does not have the correct printer driver installed. If you want to search for the proper driver, click OK." I can not find the *.INF file that is needed. I have downloaded the proper driver to the desktop and my laptop, but I do not know where to "browse" in order to locate the file.

Hope this helps, it worked for me
I used the shared printer name "printer" in printer propertys for mine.
Alternative method 1. 1. Click on the Windows icon>>Start Search>>Type printers and press enter. 2. Click on 'Add Printer'. 3. Click on 'Add a local printer'. 4. Click on 'Create a new port:'. 5. Do not change the 'Type of port:'. By default it is selected as 'Local Port'. Let it remain the same. 6. Click on 'Next'. 7. In the small 'Port name:' window, type the following under 'Enter a port name:'
  NOTE: The names should be exactly the same. They are case sensitive.
  \\computer name\printer name
  For instance: If computer name is 'John' and printer name is 'HPprinter', you have to type the exact name with all the characters including spaces. Hence in this case it would be the following:
\\John\HPprinter
8. Click on OK. 9. Click on Next and complete the Wizard. (It will now install the printer and driver) I used the 7400 series driver for my 7550 but it works.10. Try to print a Windows test page and check the printer functionality. 1 Click on the Start icon on your Desktop.2.Select Control Panel.3.Double click on the Printer icon.4.Select and Right click on HP Photosmart 7550 Printer series icon.5.Click on Properties.6.In the Properties Windows click on Print Test Page Tab it will start printing a Windows Test Page

Need help with routing a network in VMware.

I have one network with the IP of 192.168.2.10. A router is setup with two networks. The first network has an IP of 192.168.2.3 and the second network has an IP of 192.168.3.2. Then there is one final network whose IP is 192.168.3.10. My goal is to set
up route table entries and have all the networks be able to ping each other. The route table entries I am referring to is the
route -p add command. If someone could help me understand what entries I should input so all the networks can ping each other, that would be great. Thanks. If you need a picture of the network, I have a diagram.

Hi Brandon,
A diagram or picture will help us to understand your case.
For dump file or other logs which do not contain the sensitive information, you can still use OneDrive to share them so that other community members can also provide help in analysis.
If you concern personal information or company related information in logs, we recommend to send log files to our forum email account: [email protected]
Regards,
D. Wu
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Adding a Network Printer - 2012 Essentials

I am using small business server 2012 essentials and looking to purchase a network printer. The issue I see is that many of the printers I have researched do not have drivers for essentials. Some will list out R2, but I do not have that, only Essentials.
Is there a workaround to installing a printer or do the windows server 2012 drivers that most manufactures use work for the Essentials operating system. I already tried to install a Ricoh printer and used the windows server 2012 and R2 drivers, tried to manually
install the drivers, but did not work. Thanks

Hi ChrisCJK,
I agree with Cliff Galiher’s viewpoint.
Please browse the web site of printer manufacturer, and check if you can get a latest version of the driver. Then monitor if it can help you to add the printer for
Windows Server 2012 Essentials.
Meanwhile, please refer to the following article. It provided the details of installing Network Printer to Windows Server 2012 Essentials. The printer is different
with yours. However, may give some thoughts.
Windows Server 2012 Essentials : Add a Network Printer
http://titlerequired.com/2012/10/24/windows-server-2012-essentials-add-a-network-printer/
Hope this helps.
Best regards,
Justin Gu

Need help for adding component

i have 2 class, the first one is Workspace.java, the other one is BannerBox.java,
in my BannerBox.java, the code is look like this:
public class BannerBox extends JPanel{
     private JLabel bannerLabel;
     public BannerBox(){
          setLayout( new GridBagLayout());
          bannerLabel = new JLabel();
          bannerLabel.setIcon(SparkRes.getImageIcon("TEST_IMAGE"));
          bannerLabel.setHorizontalAlignment(JLabel.LEFT);
          add(bannerLabel, new GridBagConstraints(0, 0, 1, 1, 1.0, 0.0, GridBagConstraints.WEST, GridBagConstraints.NONE, new Insets(2, 2, 2, 2), 0, 0));
          setBorder(BorderFactory.createLineBorder(new Color(197, 213, 230), 1));
in my Workspace.java i've tried to add the bannerbox into workspace
and my code is looks like this:
public class Workspace extends JPanel implements PacketListener {
private BannerBox bannerBox;
private Workspace(){
add(bannerBox, new GridBagConstraints(0, 3, 1, 1, 1.0, 0.0, GridBagConstraints.WEST, GridBagConstraints.HORIZONTAL, new Insets(2, 4, 4, 4), 0, 0));
There is no error, so i can run it, but the bannerbox is not showed up... hmm, what should i do?
is there some mistake that make this code doesn't work?
(actually this class has a long code, but i can't put it all here, it very long code, and workspace.java is not my code so i barely understand the code but i need to add the label which contain image to this workspace)
need help here.. i'm stuck..
thx before
ralese

1) In the future, Swing related questions should be posted in the Swing forum (after searching to make sure it hasn't been asked before)
2) Don't forget to use the Code Formatting Tags so the posted code retains its original formatting. That is done by selecting the code and then clicking on the "Code" button above the question input area.
3) Learn how to use other layout manager before using the GridBagLayout. All the others are much easier to understand
4) Read the Swing tutorial on [How to Use Icons|http://java.sun.com/docs/books/tutorial/uiswing/TOC.html] for a working example.
5) If you need further help then you need to create a [Short, Self Contained, Compilable and Executable, Example Program (SSCCE)|http://homepage1.nifty.com/algafield/sscce.html], that demonstrates the incorrect behaviour.

Need help with my iTunes on iPhone 5 and Macbook Pro

Need help with my iPhone 5 and my Macbook Pro. I was purchased some music on itunes at my mac. Some reason I deleted those music from both on Mac and iPhone 5. Today, I went to my iPhone iTunes store inside of iCloud to redownload my puchased. But those song won't able to sync back to my iTunes library on my Mac. Can anyone help me with that ??....

You've posted to the iTunes Match forum, which your question does not appear to be related to. You'll get better support responses by posting to either the iTunes for Mac or iTunes for Windows forum. Which ever is more appropriate for your situation.

What drivers do I need for a dell V515w AIO printer on my MacBook Pro OX S 10.7.2

What drivers do I need for a Dell V515w all in one printer for my MacBook Pro OS X 10.7.2 ????

Uh, tough call, you'll have to check what is used with a PC, drivers or driver+software.
If driver+software then that's a problem as they likely won't write one for OS X.
If drivers you can install these open source one and hopefully it might work, Dell and Apple don't get along so you likely won't see Dell drivers installed by Apple in OS X like they do for others.
http://sourceforge.net/projects/gimp-print/files/

Need help in adding a network printer on my MacBook

Similar Messages

Maybe you are looking for