Need help In BPM
Hi,
My scenario is 2 iDocs ---> 2 files(Only One Reciever). and i am using a BPM to merge these two IDOC's and then again split them into two different files.
However i have two different mappings that has to be done for both these IDOC's before they are Merged. so the BPM steps that i have followed..is...
Inside Fork
Branch1->Recieve0>Transformation0
Branch2-->Recieve1>Transformation1
After Fork
Transformation2 (Multimap).
Send Step.
Now the problem is after i execute the scenario XI is unable to determine a reciever for the ABSTRACT INTERFACES that comes out from the Transformation0 and Transformation1.As these interfaces are inputs to the Transformation step2 i am unable to create a Reciever Determination.So SXMB MONI gives an Error Reciever Determination Not found.
Does these ABSTRACT INTERFACES needs to be recieved in two recieve Steps after they are transformed in the Fork to make it available for the Final transformation....?
Please need your suggestions..If this doubt makes no sense i could fwd the details to ur emails...kindly let me know.Thanks in Advance...!
Hi,
This will help you
http://help.sap.com/saphelp_nw04/helpdata/en/cb/15163ff8519a06e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/77/0737133012b24b9d0a12c6df2b1054/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/0e/56373f7853494fe10000000a114084/content.htm
and this thread
Fork in the BPM: collecting IDOC
Regards
Agasthuri Doss
Similar Messages
-
Need help for BPM Process Task - Looping
Hi Folks,
I need some info regarding Task Looping in a BPM Process.
Is there any code sample which mentions how to perform task looping and setting the context appropriately.
Thanks,
Brian.Hi Brian,
Please find the below link for Multiple Looping
http://help.sap.com/saphelp_nwce72/helpdata/en/3d/786ec2dd1243c28aeffa4c1c70df25/content.htm
Regards
Srikanth -
Multiple Source Messages Scenario - Need help
Hi,
This is my scenario.
System A sends Message A
System B sends message B
both of them are diffrent strcutures.
Now I need to map both of the messages to Message C and send it to system C.
I would need help on how to achive this requirement.
I tried using correlation in BPM but i dont know if I'm following the right approach to activate correlation.
Any help in this regard would be appreciated.
Cheers!!
SidharthHi,
I've gone through the thread but did not find much information.
The blog talks about collecting messages for same interface which I'm afraid is not wht I'm looking for.
Just to summarize wht I've done....
Start --> Receive 1 (Message A) --> Receive 2 (Message B) --> Transformation --> Send 1 (Message C) --> Stop
I've defined correlation accordingly... to pick up the PO num field.
Now when message A is submitted the outbound status on sxmb_moni is set to waiting....
But the moment I submit message B, The outbound status is set to a Green Flag and there is a SYSFAIL entry in the queue.
The error is " Permanent Error in BPE Inbound Processing"
But I see the message A is has still got the outbound status wating..
I guess I'm missing something in correlation..
cheers!!
Sidharth -
XI Realtime scenarios-need help
Hello experts,
I am new to XI and I need help with real time XI scenarios.
can you please give me 2-3 examples of What kinds of systems involve in data transfer (both sap and non sap) for transfer of what kinds of data (general IDOCs, RFCs and other kinds of data)
and what is the purpose of that scenario? also how many times the data will be transferred between the systems?
Thanks in advance,
Haritha.
useful answers will be rewarded ***Hi Haritha,
Hi,
Please go through the following are the links.
Maybe this is a good start:
http://help.sap.com/saphelp_nw04/helpdata/en/80/8e3841e26cef23e10000000a155106/frameset.htm
<http://help.sap.com/saphelp_nw04/helpdata/en/80/8e3841e26cef23e10000000a155106/frameset.htm>
https://www.sdn.sap.com/irj/sdn/developerareas/xi?rid=/webcontent/uuid/a680445e-0501-0010-1c94-a8c4a60619f8 [original link is broken]
<https://www.sdn.sap.com/irj/sdn/developerareas/xi?rid=/webcontent/uuid/a680445e-0501-0010-1c94-a8c4a60619f8 [original link is broken]>
This might help you
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
<http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm>
Further, this thread deals with everything that is needed for a starter
on XI. Do check them out,
JDBC Receiver: exact SQL statement
<JDBC Receiver: exact SQL statement>
/message/527697#527697 [original link is broken]
</message/527697#527697 [original link is broken]>
And after you are done with the documentation probably you can go
through this scenario,
JDBC Receiver: exact SQL statement
<JDBC Receiver: exact SQL statement>
Also check the following threads which might help you a little more,
Learning XI
<Learning XI>
XI 3.0 Training
<XI 3.0 Training>
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/13926f23-0a01-0010-149c-c1170e7a25db
<https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/13926f23-0a01-0010-149c-c1170e7a25db>
/people/sravya.talanki2/blog/2006/12/25/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-i
</people/sravya.talanki2/blog/2006/12/25/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-i>
/people/sravya.talanki2/blog/2006/12/26/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-ii
</people/sravya.talanki2/blog/2006/12/26/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-ii>
/people/sravya.talanki2/blog/2006/12/27/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-iii
</people/sravya.talanki2/blog/2006/12/27/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-iii>
and once you are through ...follow the following links to weblogs which
explain all the basic scenarios in XI
Following are the links to weblogs which will help to develop the basic
scenarios.
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
</people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters> - IDoc to
File
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
</people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy> - ABAP
Proxy to File
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
</people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30> - File to
JDBC
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy
</people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy> - File to
ABAP Proxy
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
</people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1> - File to
File Part 1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
</people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2> - File to
File Part 2
/people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping
</people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping> - Any flat
file to any Idoc
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
</people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit> - File to
RFC
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
<https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]> - File to
Mail
/people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i
</people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i> - Dynamic File Name Part 1
/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii
</people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii> - Dynamic File Name Part 2
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
</people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address> - Dynamic
Mail Address
/people/siva.maranani/blog/2005/05/25/understanding-message-flow-in-xi
</people/siva.maranani/blog/2005/05/25/understanding-message-flow-in-xi> - Message
Flow in XI
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
</people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm> - Walk
through BPM
/people/siva.maranani/blog/2005/05/22/schedule-your-bpm
</people/siva.maranani/blog/2005/05/22/schedule-your-bpm> - Schedule
BPM
/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi
</people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi> - Use of
Synch - Asynch bridge in ccBPM
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
<https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]> - Use of
Synch - Asynch bridge in ccBPM
/people/michal.krawczyk2/blog/2005/08/22/xi-maintain-rfc-destinations-centrally
</people/michal.krawczyk2/blog/2005/08/22/xi-maintain-rfc-destinations-centrally> - Maintain
RFC destination centrally
/people/sravya.talanki2/blog/2005/08/18/triggering-e-mails-to-shared-folders-of-sap-is-u
</people/sravya.talanki2/blog/2005/08/18/triggering-e-mails-to-shared-folders-of-sap-is-u> -
Triggering Email from folder
/people/sravya.talanki2/blog/2005/08/17/outbound-idocs--work-around-using-party
</people/sravya.talanki2/blog/2005/08/17/outbound-idocs--work-around-using-party> - Handling
different partners for IDoc
/people/siva.maranani/blog/2005/08/27/modeling-integration-scenario146s-in-xi
</people/siva.maranani/blog/2005/08/27/modeling-integration-scenario146s-in-xi> - Modeling Integration
Scenario in XI
/people/michal.krawczyk2/blog/2005/08/25/xi-sending-a-message-without-the-use-of-an-adapter-not-possible
</people/michal.krawczyk2/blog/2005/08/25/xi-sending-a-message-without-the-use-of-an-adapter-not-possible> - Testing
of integration process
/people/michal.krawczyk2/blog/2005/05/25/xi-how-to-add-authorizations-to-repository-objects
</people/michal.krawczyk2/blog/2005/05/25/xi-how-to-add-authorizations-to-repository-objects> -
Authorization in XI
http://help.sap.com/saphelp_nw04/helpdata/en/58/d22940cbf2195de10000000a1550b0/content.htm
<http://help.sap.com/saphelp_nw04/helpdata/en/58/d22940cbf2195de10000000a1550b0/content.htm>
- Authorization in XI
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
</people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step> - Alert
Configuration
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
</people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide> - Trouble
shoot alert config
/people/sameer.shadab/blog/2005/09/21/executing-unix-shell-script-using-operating-system-command-in-xi
</people/sameer.shadab/blog/2005/09/21/executing-unix-shell-script-using-operating-system-command-in-xi> - Call
UNIX Shell Script
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi
</people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi> -
Transport in XI
/people/r.eijpe/blog/2005/11/04/using-abap-xslt-extensions-for-xi-mapping
</people/r.eijpe/blog/2005/11/04/using-abap-xslt-extensions-for-xi-mapping> - Using
ABAP XSLT Extensions for XI Mapping
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure
</people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure> - Mail Adaptor options
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm
</people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm> -
Collection of IDoc to Single File
/people/sap.user72/blog/2005/11/17/xi-controlling-access-to-sensitive-interfaces
</people/sap.user72/blog/2005/11/17/xi-controlling-access-to-sensitive-interfaces> -
Controlling access to Sensitive Interfaces
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
</people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14> - The same
filename from a sender to a receiver file adapter - SP14
/people/prasad.illapani/blog/2005/11/14/payload-based-message-search-in-xi30-using-trex-engine
</people/prasad.illapani/blog/2005/11/14/payload-based-message-search-in-xi30-using-trex-engine> - Payload
Based Message Search in XI30 using Trex Engine
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i
</people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i> - XI :
Configuring CCMS Monitoring for XI- Part I
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter
</people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter> - XI: HTML
e-mails from the receiver mail adapter
/people/sap.user72/blog/2005/11/22/xi-faqs-provided-by-sap-updated
</people/sap.user72/blog/2005/11/22/xi-faqs-provided-by-sap-updated> - XI :
FAQ's Provided by SAP
Books from SAP PRESS...add this link to your favourites...
http://www.sap-press.de/international?GalileoSession=97477303A3.xx-M0Y78
Real World Scenarios of SAP XI ...VERY VERY GOOD....AWESOME
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/0
b95b488-0701-0010-57b9-e861b1ad572f
Check this up:
Exchange Infrastructure How-to Guides for SAP NetWeaver 2004 [original link is broken] (how to guides)
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm (very nice XI help)
Here is some scenarios from SDN:
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters - IDoc to File
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy - ABAP Proxy to File
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30 - File to JDBC
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy - File to ABAP Proxy
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1 - File to File Part 1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2 - File to File Part 2
/people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping - Any flat file to any Idoc
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit - File to RFC
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] - File to il
/people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i - Dynamic File Name Part 1
/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii - Dynamic File Name Part 2
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address - Dynamic Mail Address
/people/siva.maranani/blog/2005/05/25/understanding-message-flow-in-xi - Message Flow in XI
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm - Walk through BPM
/people/siva.maranani/blog/2005/05/22/schedule-your-bpm - Schedule BPM
/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi - Use of Synch - Asynch bridge in ccBPM
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] - Use of Synch - Asynch bridge in ccBPM
/people/michal.krawczyk2/blog/2005/08/22/xi-maintain-rfc-destinations-centrally - Maintain RFC destination centrally
/people/sravya.talanki2/blog/2005/08/18/triggering-e-mails-to-shared-folders-of-sap-is-u - Triggering Email from folder
/people/sravya.talanki2/blog/2005/08/17/outbound-idocs--work-around-using-party - Handling different partners for IDoc
/people/siva.maranani/blog/2005/08/27/modeling-integration-scenario146s-in-xi - Modeling Integration Scenario in XI
/people/michal.krawczyk2/blog/2005/08/25/xi-sending-a-message-without-the-use-of-an-adapter-not-possible - Testing of integration process
/people/michal.krawczyk2/blog/2005/05/25/xi-how-to-add-authorizations-to-repository-objects - Authorization in XI
http://help.sap.com/saphelp_nw04/helpdata/en/58/d22940cbf2195de10000000a1550b0/content.htm - Authorization in XI
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step - Alert Configuration
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide - Trouble shoot alert config
/people/sameer.shadab/blog/2005/09/21/executing-unix-shell-script-using-operating-system-command-in-xi - Call UNIX Shell Script
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi - Transport in XI
/people/r.eijpe/blog/2005/11/04/using-abap-xslt-extensions-for-xi-mapping - Using ABAP XSLT Extensions for XI Mapping
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure - Mail Adaptor options
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm - Collection of IDoc to Single File
/people/sap.user72/blog/2005/11/17/xi-controlling-access-to-sensitive-interfaces - Controlling access to Sensitive Interfaces
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14 - The same filename from a sender to a receiver file adapter - SP14
/people/prasad.illapani/blog/2005/11/14/payload-based-message-search-in-xi30-using-trex-engine - Payload Based Message Search in XI30 using Trex Engine
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i - XI : Configuring CCMS Monitoring for XI- Part I
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter - XI: HTML e-mails from the receiver mail adapter
/people/sap.user72/blog/2005/11/22/xi-faqs-provided-by-sap-updated - XI : FAQ's Provided by
SAP
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/6051-Performance [original link is broken] [original link is broken] [original link is broken] [original link is broken] Tuning for PI
Please give reward points if it is useful.
Regards,
Sai. -
Need help to develop Pythagoras theorem-
Hi i need help to develop proofs 2,3,4
of pythagoras theorems in java as demonstrations
These are applets can anyone help me with it or give me an idea of how to go about developing it -
the site is the following
http://www.uni-koeln.de/ew-fak/Mathe/Projekte/VisuPro/pythagoras/pythagoras.html
then double click on the screen to make it startPardon my ASCII art, but I've always liked the following, simple, geometric proof:
a b
---------------------------------------+
| | |
a| I | II |
| | |
---------------------------------------+
| | |
| | |
| | |
| | |
| | |
b| IV | III |
| | |
| | |
| | |
| | |
| | |
| | |
---------------------------------------+It almost goes without saying that I+II+III+IV == (a+b)^2, and II == IV == a*b,
I == a*a and III == b*b, showing that (a+b)^2 == a^2+a*b+a*b+b^2.
I hope the following sketch makes sense, stand back, ASCII art alert again: a b
---------------------------------------+
| . VI |
| . . |a
| V . |
| +
| |
| . |
b| . |
| |
| IX |
| . |
| . |b
| |
+ |
| . |
a| . . VII |
| VIII . |
---------------------------------------+
a bThe total area equals (a+b)^2 again and equals the sum of the smaller areas:
(a+b)^2 == V+VI+VII+VIII+IX. Let area IX be c^2 for whatever c may be.
V+VII == VI+VIII == a*b, so a^2+b^2+2*ab= c^2+2*a*b; IOW a^2+b^2 == c^2
Given this fundamental result, the others can easily be derived from this one,
or did I answer a question you didn't ask?
kind regards,
Jos -
I need help to find and open a job app that I exported, was able to fill out and sign and saved and now can't open it? What did I do wrong?
What file format did you export it to?
-
Need help to open audios attached in a PDF file
Hello
I just need help. I have ordered a reviewer online that has audios and texts in a pdf file. I was told to download the latest adobe reader on my computer. I have done the same thing on my ipad mini. I am not so technical with regards to these things. Therefore I need help. I can access the audios on my computer but not on my ipad.
I want to listen to audios with scripts or texts on them so i can listen to them when i am on the go. I was also informed that these files should work in any device. How come the audios doesnt work on my ipad.
Please help me on what to do.
ThanksAudio and video are not currently support on Adobe Reader. :-<
You need to buy a PDF reader that supports them. My suggestion is PDF Expert from Readdle ($US 9.99) -
Need help to open and look for file by name
Hi,
Im needing help to open a folder and look for a file (.txt) on this directory by his name ... The user ll type the partial name of file , and i need look for this file on the folder , and delete it ....
How can i look for the file by his name ?
Thx =)Hi ,
Sry ,, let me explain again ... I ll set the name of the files in the follow order ... Name_Serial_date_chanel.sxc ..
The user ll type the serial that he wants delete ...
I already figured out what i need guys .. thx for the help ^^
I used List Directory on advanced IO , to list all .. the Name is the same for all ... then i used Name_ concateneted with Serial(typed)* .. this command serial* ll list all serials equal the typed , in my case , ll exist only one , cuz its a count this serial .Then i pass the path to the delete , and its done !
Thx ^^ -
I need help, my ipod touch is not recognized by windows as a harddisk
i need help, my ipod touch is not recognized by windows like a memory card or a harddisk.
i would like to transfer the files from pc to my ipod touch without useing itunes.
as i see theres some people here that theires ipod touch are recongnzed as a digitl camra, mine is reconzied as nothing, some help plz.
Message was edited by: B0OmB0Om wrote:
ok but i still dont understed, only my itnes recongnize my ipod, when i go to " my cumputer, it dosent show up there, not even as a digital camra
Your Touch is working correctly. Currently, without unsupported third party hacks, the Touch has NO disc mode. It will only show up in iTunes.
how do i put programes and games in my ipod touch
Right now, you don't. The SDK is scheduled to be released in Feburary. Then developers will be able to write programs that will be loadable. -
Weird error message need help..
SO.. i havent updated my itunes in a while because i keep getting this weird message.. it comes up when im almost done installing the newest/newer versions of itunes. it says
"the feature you are trying to use is on a network resource that is unavailable" "click ok to try again or enter an alternate path to a folder containing the installation package 'iTunes.msi' in the box below"
now when ever i choose a file from the browse box it replies with this message "the file 'xxx' is not a valid installation package for the product iTunes. try to find the installation package iTunes.msi in a folder from which you can install iTunes."
no idea need help thanks
~~~lake
Message was edited by: DarkxFlamexCaster
Message was edited by: DarkxFlamexCaster+it comes up when im almost done installing the newest/newer versions of itunes. it says+ +"the feature you are trying to use is on a network resource that is unavailable" "click ok to try again or enter an alternate path to a folder containing the installation package 'iTunes.msi' in the box below"+
With that one, let's try the following procedure.
First, head into your Add/Remove programs and uninstall your QuickTime. If it goes, good. If it doesn't, we'll just attend to it when we attend to iTunes.
Next, download and install the Windows Installer CleanUp utility:
Description of the Windows Installer CleanUp Utility
Now launch Windows Installer CleanUp ("Start > All Programs > Windows Install Clean Up"), find any iTunes and/or QuickTime entries in the list of programs in CleanUp, select those entries, and click “remove”.
Next, we'll manually remove any leftover iTunes or QuickTime program files:
(1) Open Local Disk (C:) in Computer or whichever disk programs are installed on.
(2) Open the Program Files folder.
(3) Right-click the iTunes folder and select Delete and choose Yes when asked to confirm the deletion.
(4) Right-click the QuickTime folder and select Delete and choose Yes when asked to confirm the deletion. (Note: This folder may have already been deleted if QuickTime was successfully removed using Add/Remove Programs earlier.)
(5) Delete the QuickTime and QuicktimeVR files located in the C:\Windows\system32\ folder. Click Continue if Windows needs confirmation or permission to continue. (Note: These files may have already been deleted if QuickTime was successfully removed using Add/Remove Programs earlier.)
(6) Right-click on the Recycle Bin and on the shortcut menu, click Empty Recycle Bin.
(7) Restart your computer.
Now try another iTunes install. Does it go through properly now? -
I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?
Hold down the Option key while you boot your Mac. Then, it should show you a selection of devices. Click your flash drive and it will boot from that.
-
Need help adobe bridge cc output module
I need help. I have an assignment I'm held up on completing because the adobe cc bridge does not have the output modue I need. I followed the adobe instructions page to the letter. I copied and pasted the output module folder to the adobe bridge cc extensions folder in programs/commonfiles/adobe. The only thing is the instructions then say to paste the workspace file into the workspace folder located below the bridge extensions folder. I don't have a workspaces folder there or anywhere. I even tried must making one and adding the file to it, but no go. can someone PLEASE help me with this? I have an assignment due like now that requires the use of the output modue.thanks!
oh,my system is windows 8.1. sorry, lol.
-
Trying to create a Invoice based on Order need help Error -5002
the dreaded -5002 error is haunting me too! and I could not find a matching solution for this in the forum....
I need help quickly on this. I am trying to create invoices for some orders so the Base - Target relationship is retained. The orders I pick are all Open (DocStatus = O and the lines are all Open LineStatus = O)
here is my code
oInvoice.Lines.BaseEntry = 48
oInvoice.Lines.BaseLine = 0
oInvoice.Lines.BaseType = SAPbobsCOM.BoObjectTypes.oOrders
oInvoice.Lines.ItemCode = "A00001"
oInvoice.Lines.ItemDescription = "IBM Infoprint 1312"
'adding Line
oInvoice.Lines.Add
oInvoice.Lines.BaseEntry = 48
oInvoice.Lines.BaseLine = 1
oInvoice.Lines.BaseType = SAPbobsCOM.BoObjectTypes.oOrders
oInvoice.Lines.ItemCode = "A00002"
oInvoice.Lines.ItemDescription = "IBM Inforprint 1222"
'adding Line
oInvoice.Lines.Add
lRetCode = oInvoice.Add
If lRetCode <> 0 Then
gObjCompany.GetLastError lErrCode, sErrMsg
MsgBox (lErrCode & " " & sErrMsg)
End IfIndika,
Only set your base types...
(not items & description)
oInvoice.Lines.BaseEntry = 48
oInvoice.Lines.BaseLine = 0
oInvoice.Lines.BaseType = SAPbobsCOM.BoObjectTypes.oOrders
oInvoice.Lines.ItemCode = "A00001"
oInvoice.Lines.ItemDescription = "IBM Infoprint 1312"
'adding Line (to fill the second item line)
' the 1st line item is there by default
oInvoice.Lines.Add
oInvoice.Lines.BaseEntry = 48
oInvoice.Lines.BaseLine = 1
oInvoice.Lines.BaseType = SAPbobsCOM.BoObjectTypes.oOrders
oInvoice.Lines.ItemCode = "A00002"
oInvoice.Lines.ItemDescription = "IBM Inforprint 1222"
'DO NOT Add THIS line
' (only if you want to add a 3rd line item)
'''oInvoice.Lines.Add -> Don't add this
lRetCode = oInvoice.Add
If lRetCode <> 0 Then
gObjCompany.GetLastError lErrCode, sErrMsg
MsgBox (lErrCode & " " & sErrMsg)
End If
remember to add :
oInvoice.CardCode = "your BP"
oInvoice.DocDueDate = Now
oInvoiceDoc.CardCode = txtDOCBPCode.Text -
Installation of Photoshop update 13.1.2 for creative cloud fails with error code U44M1P7 I need help
I need help installing update 13.1.2 for Photoshop creative cloud, installation fails with error code: U44M1P7. Could someone please help?
Sorry to bother you.
I could find the answer after searching previous posts about this language problem.
Had to change my language in AAM profile and then download PS CS6 again ( english version ).
Then open the actual Photoshop and in preferences > interface you can besides the Dutch also option for English.
restart application and Voila.
Greetz, Jeroen -
Stored DB Procedure - Need help
Hi. I have a stored database package containing 2 functions. I need help with the function named ret_columns.
If you look at the code below you will see this function has two different FOR loops. The Select statement in FOR loop that is commented out works just fine, but when I try to use the uncommented select statement in it's place the Function returns NULL (or no records). However, if I run the Select statement in plain old SQL Plus it returns the rows I need. I don't get it.
Can anyone help me? I'm really stuck on this one.
-- PACKAGE BODY
CREATE OR REPLACE package body audit_table_info
as
function ret_tables return table_type is
t_t table_type;
i integer;
begin
i := 1;
for rec in (select distinct table_name
from all_triggers
where substr(trigger_name,1,9) = upper('tr_audit#')) loop
t_t(i).tableA := rec.table_name;
i := i+1;
end loop;
return t_t;
end;
function ret_columns return column_type is
c_t column_type;
i integer;
begin
i := 1;
-- for rec in (select distinct table_name column_name
-- from all_triggers
-- where substr(trigger_name,1,9) = upper('tr_audit#')) loop
for rec in (select distinct b.column_name column_name
from all_triggers a, all_tab_columns b
where a.table_owner = b.owner
and a.table_name = b.table_name
and substr(a.trigger_name,1,9) = upper('tr_audit#') and rownum < 5) loop
c_t(i).tableB := rec.column_name;
i := i+1;
end loop;
return c_t;
end;
end audit_table_info;
-- PACKAGE DEFINITION
CREATE OR REPLACE package Audit_Table_Info as
type table_rec is record( tableA all_tab_columns.TABLE_NAME%type);
type table_type is table of table_rec index by binary_integer;
function ret_tables return table_type;
type column_rec is record( tableB all_tables.TABLE_NAME%type);
type column_type is table of column_rec index by binary_integer;
function ret_columns return column_type;
end Audit_Table_Info;
/It works when I do this!!! I'm so confused.
Ok...so I did this:
1 create table test_columns as
2 (select b.column_name
3 from all_triggers a,
4 all_tab_columns b
5 where a.table_owner = b.owner
6 and a.table_name = b.table_name
7 and substr(a.trigger_name,1,9) = upper('tr_audit#')
8* and rownum < 5)
SQL> /
Table created.
Then altered the Function so the Select statement refers to this table:
function ret_columns return column_type is
c_t column_type;
i integer;
begin
i := 1;
for rec in (select distinct column_name
from test_columns) loop
c_t(i).tableB := rec.column_name;
i := i+1;
end loop;
return c_t;
end;
Again, any help would be greatly greatly appreciated!
Maybe you are looking for
-
I dropped my iphone and the screen started popping out
i recently dropped my phone and it fell flat on its screen. the top right hand of the screen popped out and when i pressed the home button, there were white lines going vertically on the screen. My touch screen also wont work at all. I tried popping
-
Table to fetch account group against GL accounts ( groups created by KDH1)
Hello, Can anyone tell me that from what tables i fetch the data of account groups and GL accounts against them. regards Hina.
-
I built a DAQ vi in the labview6.1 to acquire four channels'data(use pci_6110E) .And i compiled it to a dll.I wanted to use visual c++ to call it and expected it pass acquired data to visual c++.
-
Error message at loop point of main menu...
Anyone ever get this message when building a DVD? http://www.reflexive-cinematics.com/miscimages/errormessage.jpg I keep getting this damn messages with Every adobe application. I was having tons of issues with encore 1.0 so I upgraded and bought 2.0
-
Im trying to watch some online movies inmy Ipad2. I can open the online site itself but when I click the play button, its says that I need to download some flash player to play the video. How can I download this flashplayer?? Please help..........