Need help in customizing an identity provider using SPI

We are customizing the sample identity provider in note 1194815.1 . We were able to assign tasks to users but the problem is whenever we assign a task to a group, the task does not appear in group members job basket.
No exceptions or errors thrown.

Hi, I managed to find the refresh cached option. However there is still one thing which i need some clarification on.
The problem for me is to quantize the image into 2 bits per pixel per channel. I understand from the previous post that i need to use posterize and set it to 4. My questions are as follow.
1) why must the value be 4? if the value is 4 then there should be 8 bits, but my question require a total of 6 bits only
2) After saving my quantized image, the properties of the image still show me the bit depth being 24, thus is there any where whereby i can check that each color pixel is exactly represented by 2 pixels?
Hope you can advise. Tks

Similar Messages

I need help verifying the details of a used ipad mini I'm about to buy. Is this possible by just providing the serial

I need help verifying the details of a used ipad mini I'm about to buy. Is this possible by just providing the serial

It depends on what you mean by "verifying the details". sberman gave you the best place to look to research the technical specifications of the device you are thinking of purchasing. If, however, you're asking how to check if the device is Activation Locked, then you can check the status here: https://www.icloud.com/activationlock/

Hi - I need help. I would like to use my old iPhone 3 as an iPod for music only. Problem is that my phone is locked with a password I can't remember. I havent used the phone since I got my iPhone 4. Anyone who know how I can reset the phone to standard?

Hi - I need help. I would like to use my old iPhone 3 as an iPod for music only. Problem is that my phone is locked with a password I can't remember. I havent used the phone since I got my iPhone 4. Anyone who know how I can reset the phone to standard installation or just get acces to the phone. There is no SIM card in the phone.

Hi Lawrence,
Thanks for your prompt response, however I have first seen it now. I have placed an active SIM card in the iPhone turned it off and on. It now says SIM locked, please write access code. The problem is I don't remember the password. When I connect it to iTunes it tell me that I have to write the password before it can be used with iTunes...... Do you have any good ideas? I see you are from the NYC area.... used to work there back in the early 90´ Those were good days..... What a City

I need help from Customer Support. Whatever this charge is on my credit card,

He recibido un cargo de su tienda, que curiosamente he visto que se han hecho muchos cargos a diferentes personas bajo el mismo copncepto y tienda.Favor acreditarme dicho monto porque no he comprado nada con ustedes y ni tengo idea donde está Minesota.Este es mi cargo. 23/07/15323343GEEKSQUAD RENE00015826 RICHFIELD UUSRD$1,428.010.00 Y veo en Internet que otros clientes han hecho reclamos del mismo concepto. Subject Author PostedGEEKSQUAD RENE00015826Care‎03-09-2015 06:30 PMGEEKSQUAD RENE00015826 Unknown ChargePriscillaQ‎12-29-2014 10:08 PMrandom 10 dollar charge from richfield MN to my ac...ChrisBurns‎07-01-2015 12:50 PMUnknown Geeksquad charge on my Credit CardHardingR‎12-01-2014 05:57 PMGeekSquad protection terms changed without being i... Lo que me hace pensar que algo anda muy mal en ese Best Buy. Como es posible que no hayan corregido e identificado quienes están detrás de este fraude que lleva años. I need help from Customer Support. Whatever this charge is on my credit card,jesmann‎10-05-2014 04:52 PM

Hola scj2000-
Muchas gracias por visitar nuestro foro en búsqueda de una explicación al cargo que recién apareció en tu tarjeta de crédito.
Entiendo su preocupación, ya que cualquier cargo extraño que aparece en un estado de cuenta puede ser alarmante. En este caso, el último cargo que puede recuperar usando el correo electrónico que usaste para registrarte al foro, refleja que se renovó un antivirus Kaspersky. Esta autorización nos diste cuando realizaste la compra de tu Lenovo, desde entonces se renueva automáticamente la licencia de antivirus.
Las otras publicaciones que has leído, indican lo mismo. Un cargo que se ha hecho a la tarjeta de crédito que se presentó durante la compra con la autorización del cliente.
Lamento mucho la confusión y espero esto aclare tu duda.
Atentamente,

Need help a custom algorithm

Hello All
Need your to create custom algorithm
Request provide SAP path or t.code to create the same.
Regards
Sameer

Don't try to do this in Java straight off. First pretend you work in the pizza place and determine how to figure out how much of what kind and what size pizza you need, using just pencil and paper. That will give you your algorithm, and if you have problems traslating that into code I (and others) would be glad to help. If you can't figure out the logic for an ordering pizza algorithm on your own, you might be in trouble for your school and you may not have much future as a programmer in any language. A harsh reality perhaps, but there it is.

Need help for Customizing Correspondence Management

Hi,
Could anyone provide me some documents or reference links which will be helpful for Customizing Correspondence Management in ES4?
Many Thanks!!

Hi Santosh,
Sorry for the late reply.
I have a XDP file having both static and dynamic content. I need to populate the dynamic content with some value which I will be getting from the XML which is stored in the body of the SOAP request. I want the letter to be generated dynamically (like no user selection of XML etc) because I want to avoid manual input in the correspondence management.
Could you please let me know if the above can be achieved. If yes, could you please provide any useful stuff related to above requirement.
Many Thanks!!!

Need help in customizing workflow

Hi All,
Need your help in customizing APINVAPR workflow.
Please help in clarifying below point.
How APINVAPR is mapped to invoice approval process,for PO we use document type form to map the POAPPRV workflows when we customize we will map the custom workflow XXXPOAPPRV to make our workflow work.
Similarly how will we customize APINVAPR and map the workflow, pls let me know your thoughts.
My requirement is to customize the APINVAPR workflow and increase the escalation days, during the Invoice Approval Process/Escalate Document Approval activity escalation will happen in 5 days, i need to increase it by 60 days.
If anyone have worked in similar requirement, please help.
Also while downloading getting following error
While downloading workflow APINVAPR, getting below errors
Item type APINVAPR
wferr:
- 1300: Could not load.
- 1114: Could not load from database.
- 1115: Could not load all definitions referenced by 'APINVAPR' item type.
- 1115: Could not load contents of 'APINVAPR' item type.
- 1101: Could not load item types from database. FILTER=APINVAPR
- 210: Oracle Error: ORA-01480: trailing null missing from STR bind value. SQL text: SELECT protect_level, custom_level, name, display_name, description, wf_selector, read_role, write_role, execute_role, persistence_type, to_char(persistence_days) FROM wf_item_types_vl WHERE name like :itemtype ORDER BY name
But it was fine when i downlaod POAPPRV.
Any one face similar kind of issues, please help.
Thanks
Badsha

Hello,
I am also getting the same error.
WFLOAD apps/apps 0 Y DOWNLOAD file_name.wft INVADJTO
Item type INVADJTOwferr:
- 1300: Could not load.
- 1114: Could not load from database.
- 1115: Could not load all definitions referenced by 'INVADJTO' item type.
- 1115: Could not load contents of 'INVADJTO' item type.
- 1101: Could not load item types from database. FILTER=INVADJTO
- 210: Oracle Error: ORA-01480: trailing null missing from STR bind value. SQ L text: SELECT protect_level, custom_level, name, display_name, description, wf_selector, read_role, write_role, execute_role, persistence_type, t o_char(persistence_days) FROM wf_item_types_vl WHERE name like :itemtype ORDE R BY name
The item type exists in system. It is a seeded one.
Can anyone help on this !!!
Thanks

I need help in Custom Reporting

Hi,
i need help in auditing, SCOM 2012 R2 is deployed in 2 servers with ACS, i have 2 file server that has some shared folder in which users work on some certain document i need to have a report that i can run on certain file that will show me who access that
file when he access what he did like (read write, delete). i don't think we have this type of capability in default report. let me know if someone can help me in that. (free/paid) i know its a bit customized. let me know if u need any more info.
Syed Kasif

Hi,
As far as I know, to audit file access, we should Enable Audit Policy, and then Set up Audit System Access Control List (SACL).
After that, we can make sure that under security event logs there are auditing logs for file access.
Please refer to the below link for more details about auditing file access on file server:
http://blogs.technet.com/b/mspfe/archive/2013/08/27/auditing-file-access-on-file-servers.aspx
And for Collecting Security Events Using Audit Collection Services in Operations Manager:
http://technet.microsoft.com/en-us/library/hh212908.aspx
Regards,
Yan Li
Regards, Yan Li

Need Help updating custom API Interface to VME-MXI-2

Need Help.
I have a custom Visual C++ 6.0 application that interfaces to the VME-MXI-2 card.
This interface works on older machines, but when we upgrade to new PC's, the interface works, yet it appears that communication exists between the hardware board, and the PC Card appears to be working properly.
I suspect that the drivers have a different interface, but need the interface documentation in order to verify this, can you help?
Older machines use: PCI-MXI-2, and the driver is: C:\Windows\System32\Drivers\vvxid.sys (File version 1.2) cpright 1996-2000
Newer machine has: PCI-MXI-2, and the driver is: C:\Windows\System32\Drivers\nipalk.sys (File version 1.61f0) cpright 2002

Alan,
As for reading and writing memory addresses from the VME memory map, you could use functions such as viIn8, viIn16, viIn32, viOut8, viOut16, or viOut32 in the NI-VISA API. You can find the NI-VISA Funtion help at "Start >> Programs >> National Instruments >> NI-VISA >> NI-VISA Help" for Windows. Alternativelly, the NI-VISA Programmers Reference Manual is available for download from ni.com.
What exactly is your application that uses ACFAIL? ACFAIL is typically pretty unrealiable, and is a difficult signal to catch (especially over a bus extension like MXI-2). Basically, ACFAIL is asserted right before a total failure/shutdown of the chassis, so you have a very short window of time to detect the signal before it disappears.
Regards,
Greg Caesar
App
lications Engineer
National Instruments

Need Help: Generate Customer Data from Prod Database

Hi All,
My company have an Oracle Financial System, with and old version Oracle Application 11.0.3 and Oracle Database 8.0.5. The database name PROD. This system has been use for more than 7 years and in between there were many stuff resigned without handover and therefore many records and supporting steps cannot be trace back. However the system is still keep running and updated daily.
Recently we have a user request to generate out a list of customer company name, and their related products purchase from the database, this is because they does not have any methods to print out the list from application. Unfortunately, we do not know which tables or index is actualy storing the name of the customer and products. We have the list of below users accounts that able to log in to the database.
PA/PA
APPLSYS/APPS
APPS/APPS
ALR/ALR
AX/AX
AK/AK
GL/GLRG/RG
FA/FAHR/HR
SSP/SSP
HXT/HXT
OTA/OTA
RLA/RLA
VEH/VEH
QA/QA
ICX/ICX
AZ/AZ
AP/AP
AR/AR
OE/OE
OSM/OSM
NSM/NSM2020
CN/CN
MFG/MFG
INV/INV
PO/PO
BOM/BOM
ENG/ENG
MRP/MRP
CRP/CRP
WIP/WIP
CZ/CZ
PJM/PJM
FLM/FLM
MSC/MSC
CS/CS
CE/CE
EC/EC
JG/JG
APPS/APPS
All the reference documents is no longer exist. I am able to use SQL Plus to generate the list of tables with the command : select table_name from user_tables. Each user accounts will return different kind of table names. But still I cant locate which table that actually storing the name of the customers and products.
Is that anybody got hands on this case before? Urgent

We have this table: And need to unload this table data in flat file format.
Need help with unload SQL file with these two columns:
AMT_PAID_ORIG, AMT_PAID_ADJ
SQL> desc flconv.claim_adj_less
Name Null? Type
SAK_CLAIM_ADJ_LESS NUMBER(10)
SAK_CLAIM_ADJ NUMBER(10)
ADJ_CLAIM_ICN NUMBER(13)
ORIGINAL_CLAIM_ICN NUMBER(13)
DATE_PAID_ORIG NUMBER(8)
DATE_PAID_ADJ NUMBER(8)
AMT_PAID_ORIG NUMBER(10,2)
AMT_PAID_ADJ NUMBER(10,2)
SAK_PROV_LOC NUMBER(9)
SAK_FUND_CODE NUMBER(9)
CHECK_SAK NUMBER(9)
SAK_PUB_HLTH NUMBER(9)

Need help in formatting the report created using SSRS

I have created an image and used it as the body background. But I want that image to come at right
Set bodyRepeat as RepeatY.
Currently its showing as below I need this blue image at the right most side of the report as below
Also I need to display text on the image.
Need Help!!!
Abhinav

Hi AbhinavSultania,
According to your description, you created a report and added background image to it, you want to display the image at right side of the report and display text on the image.
According to my knowledge, we could not control position of background image, as a workaround, we can refer to the following steps:
Create an image with the blue line at right side of it using Paint.
Right-click body of the report to open Body Properties dialog box, then import the image as background image.
Drag text box from Toolbox to the blue line of the image. Right-click inside of the text box and click Expression, we can use expression to show dynamic contents at runtime.
The following screenshot is for your reference:
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
Wendy Fu
TechNet Community Support

Need help connecting to an aws instance using a key from my macbook

i need to connect to an amazon instance using terminal and a keypair from a macbook pro. please help since its possible to connect to the aws instance easily using putty on windows 7 OS but failing to connect on my new macbook pro. step by step really appreciated.

You may need to open TCP and UDP port 3283 and TCP and UDP port 5900 in the routers on your end and your company's end. For encrypted file transfer (ARD 3.0), also open TCP port 22. You may also need to open TCP (and perhaps UDP) 5988 and 5989, though it's not clear under what circumstances this will be necessary.
If your systems at work get their IP addresses via NAT, you'll also have to forward those ports to your MBP's internal IP address.

Need help in Custom component creation with cq

Hi,
I have created my own component in adobe cQ and able to drag an drop in any page. for each instance I am seeing the copy of
component under node /content/mypage/commoncomp. If I edit the properties using design dialog I can able to store values as
expected.
Need help in
1) When I drag and drop the component it shows null for the property by deafult if I click save on edit dialog then the
value is showing. The default value is not shown by default while drag and drop my component it requires atleast one time to
click save from dialog using design mode
2) I need to use the default properties of the orginal components which is root and use the duplicated properties if incase user edit the properties of duplicated component. This may be too messy.... to be more clear
I want to use a common component in many pages but the properties of the components should be updated only when user edit it in design dialog utill then I need the page to use properties of root component.
Thanks

You just need to create your own version of PlumtreeTopBarView (original in com.plumtree.common.uiparts), and use CustomActivitySpace.xml to override that view with your own view. Your version would use some kidn fo logic to determine whether or not to display certain elements. TheUI Customization Guide should help quite a bit, and we have several quickstarts for overriding views you can start from.
Is there some Help file in PT that I can reference that will enable me to find what namespace does GetRequestURL() belongs to?I would simply do a string compare. Tokenize the URL into the base address / control arguments, perhaps splitting on the "?" symbol; then tokenize the base address on the ".". You'll end up with three strings. For portal.plumtree.com, the three strings would portal, plumtree, and com. You can then use those string in the logig you add to PlumtreeTopBarView.
David Phipps
Plumtree Software

Need Help In "Custom" TopBar Class

New to Plumtree and need help to get rolling. Req's is simple thus far: To supress render of "Login" link in TopBarView for Guests if certain URL is captured at Request.
There were some topics here that suggests extending from the Class PlumtreeTopBarView.CS, I just need to identify which UI part that renders the "Login" html link to supress this. I got the function to use to capture the URL string -> GetRequestURL(), I am fishing info on where or what function in PlumtreeTopBarView I need to override to plugin a condition that if this URL string == <something> then suppress "Login" link, or the Search, or whatever elements in the TopBar I need to suppress if need be??
Is there some Help file in PT that I can reference that will enable me to find what namespace does GetRequestURL() belongs to? Please bear with me I am very new to PT code infrastructure, still trying to find stuff with strict deadlines. Much Obliged in advance...

You just need to create your own version of PlumtreeTopBarView (original in com.plumtree.common.uiparts), and use CustomActivitySpace.xml to override that view with your own view. Your version would use some kidn fo logic to determine whether or not to display certain elements. TheUI Customization Guide should help quite a bit, and we have several quickstarts for overriding views you can start from.
Is there some Help file in PT that I can reference that will enable me to find what namespace does GetRequestURL() belongs to?I would simply do a string compare. Tokenize the URL into the base address / control arguments, perhaps splitting on the "?" symbol; then tokenize the base address on the ".". You'll end up with three strings. For portal.plumtree.com, the three strings would portal, plumtree, and com. You can then use those string in the logig you add to PlumtreeTopBarView.
David Phipps
Plumtree Software

HT201272 Need help guys i purchased a gems using my credit card but i didnt get the gems in that game but i was charge on my credit card, need help :(

I tried to purchased gems in the game castle master i used my credit card but when i tried to purchase for the first time no gems was added on my account i tried it again it went thru but when i saw my invoice for my purchase i got charged twice but i only got the gems once, NEED HELP PLEASE

Hi..
If this is an In-App purchase, turn off the subscription until the matter is resolved > iTunes Store: Purchasing and managing auto-renewing subscriptions
iTunes Store: About In-App Purchases

Need help in customizing an identity provider using SPI

Similar Messages

Maybe you are looking for