Need help in getting more information on Adobe AIR

Hello RoboHelp Experts,
I use RoboHelp version6 and I generate Adobe’s WebHelp as an output type for our Web-based application. I am the only person in my company who works with this tool. My supervisor is interested in Adobe AIR. I have done some research and I know that to have this functionality we will have to buy a new version 8. However, I am not sure if Adobe AIR will work with the WebHelp output? I think Adobe AIR generates a single file similar to .CHM.
These are the following questions I have:
Does Adobe AIR only generate a single file similar to .CHM or it can also generate a WebHelp?
If the answer to the first question is yes that it can generate a WebHelp as well then the second question would be - does Adobe AIR WebHelp include all the functionalities as it does for a single file? Is the WebHelp output as reliable as a single file output?
Since I am the only person who is in charge of doing this how difficult it will be for me to upgrade to version 8 and generating Adobe AIR WebHelp, especially when I don’t know the programming.
Thanks so much
Sangeeta

Check out Peter's website: www.grainge.org for info on AIR
Message was edited by: Captiv8r - Made clickable link to visit Peter's AIR page.

Similar Messages

I need HELP on finding in the Archives Adobe Air.

I have a Macintosh running OSX ver. 10.5.8.
I need an Adobe Air to run on it.
Can you tell me what ver. of Adobe Air from the Archives I use?????
Thank You in advance for any help!!!!
Art Bentley...

AIR 2.7.1.1961
looks like the latest version you can use: http://helpx.adobe.com/air/release-note/air-2-7-user-release.html
http://www.adobe.com/support/documentation/en/air/releasenotes.html

Can CM12 hardware inventory get more information by calling a WMI Method

Hello Everyone,
i have a question for CM12 hardware inventory. here is my question
i'm now have a powershell script which can lists all the shared folder permissions or NTFS permissions. This powershell get such information by calling a WMI Method in Win32_LogicalShareSecuritySetting.
here is the powershell link http://gallery.technet.microsoft.com/scriptcenter/Lists-all-the-shared-5ebb395a
i'm now trying to implement this in SCCM 2012 R2. In SCCM client settings you can add a BASIC WMI classes very simply. But i didn't find a way to calling WMI classes Method by SCCM hardware inventory which can help me get more information just like
the powershell i posted.
i'm really not familiar with WMI and not under what is WMI method very clearly.. just hope someone can give me a quick answer of my question
Any help will be greatly appreciated
Thanks
MJQIAN

What is your exact requirement?
Creating a WMI provider is Hard. Really hard, but one created you will get real-time results.
However creating a static WMI class is easy. But the results need to be refreshed every so often to ensure that the data is relevant. I did a quick bing search and here is a PowerShell script to do it.
http://social.technet.microsoft.com/Forums/scriptcenter/en-US/183b8b56-131c-4de7-80bc-08650daf7333/wmi-custom-class-with-powershell?forum=ITCG
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Need Help ASAP. Deleting Underline in Adobe Reader Touch.

I don't understand why it won't let me delete the strikeout or underline in my Adobe Reader Touch. There is no clear option when I highlight it and write click and the "Ctrl-delete" option is not working either. I need to get rid of both of these. Did them by mistake....simple task but so frustrated that I have spent 30+ minutes trying to figure this out. Please help.

thank you
ส่งจาก จดหมายของ Windows
จาก: ambersenos
ส่งเมื่อ: อา. 11 มกราคม 2558 21:23
ถึง: thang dinhvan
Need Help ASAP. Deleting Underline in Adobe Reader Touch.
created by ambersenos in Adobe Reader Touch for Windows 8 - View the full discussion
I don't understand why it won't let me delete the strikeout or underline in my Adobe Reader Touch. There is no clear option when I highlight it and write click and the "Ctrl-delete" option is not working either. I need to get rid of both of these. Did them by mistake....simple task but so frustrated that I have spent 30+ minutes trying to figure this out. Please help.
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7085957#7085957 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7085957#7085957
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Adobe Reader Touch for Windows 8 by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.

I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.
In particular, I am analyzing the example "Even Angle Reference Signal Processing (Digital Tacho, DAQmx).vi", whose documentation I am reproducing in the following:
DESCRIPTIONS:
This VI demonstrates how to extract even angle reference signals and remove the slow-roll errors. It uses DAQmx VIs to acquire sound or vibration signals and a digital tachometer signal. This VI includes a two-step process: acquire data at low rotational speed to extract even angle reference; use the even angle reference to remove the errors in the vibration signal acquired at normal operation.
INSTRUCTIONS:
1. Run the VI.
2. On the DAQ Configurations tab, specify the sample rate, samples per channel, device and channel configurations, and tachometer channel information.
NOTE: You need to use DSA PXI-447x/PXI-446x and PXI TIO device in a PXI chassis to run this example. The DSA device must be in slot 2 of the PXI chassis.
3. Switch to Extract Even Angle Reference tab. Specify the number of samples to acquire and the # of revs in reference which determines the number of samples in even angle reference. Click Start to take a one-shot data acquisition of the vibration and tachometer signals. After the acquisition, you can see the extracted even angle references in Even Angle Reference.
4. Switch to the Remove Slow-roll Errors tab. Click Start to acquire data continuously and view the compensate results. Click Stop in this tab to stop the acquisition.
ORDER ANALYSIS VIs USED IN THIS EXAMPLE:
1. SVL Scale Voltage to EU.vi
2. OAT Digital Tacho Process.vi
3. OAT Get Even Angle Reference.vi
4. OAT Convert to Even Angle Signal.vi
5. OAT Compensate Even Angle Signal.vi
My question is: How is the synchronization produced at the time of the compensation ? How is it possible to eliminate the errors in a synchronized fashion with respect to the surface of the shaft bearing in mind that I am acquired data at a low rotation speed in order to get the "even angle reference" and then I use it to remove the errors in the vibration signal acquired at normal operation. In this application both operations are made in different acquisitions, therefore the reference of the correction signal is lost. Is it simply compensated without synchronizing ?
Our application is based on FPGA and we need to clarity those aspects before implementing the procedure.
Solved!
Go to Solution.

Hi CracKatoA.
Take a look at the link bellow:
http://forums.ni.com/ni/board/message?board.id=170&message.id=255126&requireLogin=False
Regards,
Filipe Silva

Iplanet web server 7 -how to get more information when a certificate is untrusted ?

Hi
When a client tries to access to iplanet 7.0.15, we only get a line in the errors log with a simple error., for instance SSL_ERROR_UNKOWN_CA_ALERT...
We would like to know if it is possible to configure iplanet to get more information about this request..
iPLANET is receiving requests from a lot of clients and sometime it is difficult to identify the source of a error without more information..
We would like have similar information that access log shows when certificate is valid
We get the same information with log-level = info or finest..
Thanks
Uge

Hi Uge,
Setting the iPlanet Web Server log level to 'finest' will give you more information, but it is very verbose, and you still might not get the information you are looking for. You might want to try 'fine' or 'finer' first to see if either of those gives you the information you need.
With regards to the above error, SSL_ERROR_UNKOWN_CA_ALERT, this means that the client presented a certificate in the SSL handshake that was signed by a CA that the Web Server doesn't have in it's certificate database. In order to ensure the Web Server is kept upto date with the latest set of public CA certificates, I would recommend you upgrade to the latest version.
If you know that the certificates the clients are using are from an internal CA, you need to ensure the Root CA Certificate from that internal CA is installed in the Web Servers certificate database as a trusted certificate.
regards
Tracey

Where can I get more information on Cryptography Extension ??

Hi.
Does anyone know how to set up the Jarsafe product ?
Another thing is, how to set security for the Cryptography Extension ??
can anyone tell me where can i get more information on this ??
Thank you.

You need to download the JCE 1.2.1 that is available on the http://java.sun.com website. Once you download the software, you need to make the jar files available. It is easiest to place the JCE jar files in the extension mechanism folder since permission has already been granted, by default, to any code in that folder. That folder is JAVA_HOME\lib\ext on Windows. JAVA_HOME is where the Java Runtime Environment is installed.
When using JarSafe with Java Web Start, make sure that the JCE jar files are placed in the extension mechanism folder of the JRE that Java Web Start is using.

Hello, I need help to retrieve deleted information to partition an external hard drive. What should I do?

Hello, I need help to retrieve deleted information to partition an external hard drive. What should I do?

I'm not about the question, and giving you the right answer requires me to ask a few more questions.
Do you want to retrieve deleted information for future usage, or to completely delete a partition? The latter is straightforward: simply erase the partition. The former is more complicated: it's very difficult, even using available commercial software, to recover deleted information. If the data is important, you may want to contact a professional like DriveSavers. It won't be cheap.

Hi need help on getting customer open items

hi all,
i need help regarding getting open items for customers in the previous
ie. if i give current date,
i want to get the open items for past 30 days from current date
help me to get this ...
thanks a lot
regards,
selvi

or else ,
use table BSID.
Regards
Peram

Get mor information from customer AI_SC_GET_SAP_CUSTOMER_NUMBERS

Hello,
In our solution manager, we are trying to get more customer information from sap.
In report AI_SC_GET_SAP_CUSTOMER_NUMBERS that call function BCSN_Z001_GET_VARS_DEBITS in remote RFC SAP-OSS to get all customer numbers.
i see that this function fill the table l_debits that have more information than the customer as well as name, phone, country, etc..
but we only can get the customer numbers.
is there any possibility to get more information as name, address, contact person, etc.. from Sap to solution manager synchronization process to get all customers data up-to-date ? thought this report or another one ?
thanks:
Luis
[update 09/08/2013] - just for try to answers my first scn post but still interested on any information from SAP for allow that information that can be important to have on solution manager after SMP update.

up

Need help with a activation code for Adobe Acrobat X Standard for my PC,, Don't have older version serial numbers, threw programs away, only have Adobe Acrobat X Standard, need a code to unlock program?

Need help with a activation code for Adobe Acrobat X Standard for my PC, Don't have older Version of Adobe Acrobat 9, 8 or 7.

You don't need to install the older version, you only need the serial number from your original purchase. If you don't have them to hand, did you register? If so, they should be in your Adobe account. If not you really need to contact Adobe, though it isn't clear they will be able to do anything without some proof of purchase etc.

Where can I get more information about User exits?

Where can I get more information about user exits,their related Tables and the source code of an User exit?
Thanks

would you please give the Internet addresses of these places?
Mostly I want to get the source of some user exits in Oracle Application.
If you know how and where can I get these sources,I'll appriciate if you let me know.
Regards

I need help in getting my Iphone 3gs unfrozen

Need help in getting my Iphone 3gs unfrozen. The apple logo is shown yet it will not restart. Suggestions?

Hi,
Try here > iPhone and iPod touch: Frozen and unresponsive

I need help in getting my software options in CS5 Photoshop Student version. We have registered the product but don't have print preview or Adjust Auto Levels for example?

I need help in getting my software options in CS5 Photoshop Student version. We have registered the product but don't have print preview or Adjust Auto Levels for example?

<moved from Downloading, Installing, Setting Up to Photoshop General Discussion>

I need help in getting my reponses

I need help in getting my responses back, or I am sending out the form wrong and people aren't getting it. Either way I need help, as I am getting very frustrated. Thanks Dori

<moved from Downloading, Installing, Setting Up to Photoshop General Discussion>

Need help in getting more information on Adobe AIR

Similar Messages

Maybe you are looking for