Need help in GRC Migration

Hello Gurus,
I am looking for an Expert who could assist me in GRC Migration.
I have downloaded the Migration guide, which is available on Market Place.
There is a Migration Tool available (Java Tool), howevre there is nothing mentioned about the migration tool in Migration Guide. This is confusing.
Currently there 2 active modules in GRC 5.3 and those are RAR and SPM.
ARM need to be configured once we migrate to GRC 10.
I need help for migration planning or making a roadmap for Migration and also require help on requirement gathering / Business Blueprinting for ARM.
Please revert back on the same thread.
Thanks in advance.
Regards,
Atul Rajwade

Hi Atul
I need help for migration planning or making a roadmap for Migration and also require help on requirement gathering / Business Blueprinting for ARM.
This type of help is architecture and strategy experience. Have you done design work before?
If you are hoping for some assistance, you might get a better response if you provide what you are intending to do first and seek clarification on your thoughts rather then just say you need help without specify which parts your need assistance with.
Asking someone to revert back to you this information to close to completing system design for you.
If you do not know how to architect a solution, I recommend you seek a consultant to provide this service to you. The planning and roadmap will come back to the business process design, understanding what data needs to be migrated from 5.3 (e.g. rule set, mitigating controls, etc) as well as how GRC 10 is to be used.
Regards
Colleen

Similar Messages

  • I need help with a migration from Exchange 2010 to 2007

    Hi All,
    I need help migrating mailboxes from a separate forest / domain using exchange 2010 to our Exchange 2007 SP3 servers..  I am following this procedure:
    1. On source server, create a mailbox user, test01.
    2. On target server, run the following command to move the AD account:
    Prepare-MoveRequest.Ps1 -Identity [email protected] -RemoteForestDomainController FQDN.source.com -RemoteForestCredential $Remote -LocalForestDomainController FQDN.target.com -LocalForestCredential $Local -UseLocalObject -Verbose"
    3. Run the ADMT to migrate the password and SID history.
    4. Run the following command to move the mailbox:
    New-MoveRequest -Identity '[email protected]' -RemoteLegacy -RemoteTargetDatabase DB03 -RemoteGlobalCatalog 'GC01.humongousinsurance.com' -RemoteCredential $Cred -TargetDeliveryDomain 'mail.contoso.com'
    (Changed all the details obviously)
    It gets to 95% and shows this error
    01/12/2014 12:47:24 [EX2K10] Fatal error UpdateMovedMailboxPermanentException has occurred.
    Error details: An error occurred while updating a user object after the move operation. --> Active Directory operation failed on DC.DC.COM . This error is not retriable. Additional information: The parameter is incorrect.
    Active directory response: 00000057: LdapErr: DSID-0C090A85, comment: Error in attribute conversion operation, data 0, vece --> The requested attribute does not exist.
       at Microsoft.Exchange.MailboxReplicationService.LocalMailbox.Microsoft.Exchange.MailboxReplicationService.IMailbox.UpdateMovedMailbox(UpdateMovedMailboxOperation op, ADUser remoteRecipientData, String domainController, ReportEntry[]& entries,
    Guid newDatabaseGuid, Guid newArchiveDatabaseGuid, String archiveDomain, ArchiveStatusFlags archiveStatus)
       at Microsoft.Exchange.MailboxReplicationService.MailboxWrapper.<>c__DisplayClass3c.<Microsoft.Exchange.MailboxReplicationService.IMailbox.UpdateMovedMailbox>b__3b()
       at Microsoft.Exchange.MailboxReplicationService.ExecutionContext.Execute(GenericCallDelegate operation)
       at Microsoft.Exchange.MailboxReplicationService.MailboxWrapper.Microsoft.Exchange.MailboxReplicationService.IMailbox.UpdateMovedMailbox(UpdateMovedMailboxOperation op, ADUser remoteRecipientData, String domainController, ReportEntry[]& entries,
    Guid newDatabaseGuid, Guid newArchiveDatabaseGuid, String archiveDomain, ArchiveStatusFlags archiveStatus)
       at Microsoft.Exchange.MailboxReplicationService.RemoteMoveJob.UpdateMovedMailbox()
       at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.UpdateAD(Object[] wiParams)
       at Microsoft.Exchange.MailboxReplicationService.CommonUtils.CatchKnownExceptions(GenericCallDelegate del, FailureDelegate failureDelegate)
    Error context: --------
    Operation: IMailbox.UpdateMovedMailbox
    OperationSide: Target
    Primary (b5373e49-6a06-41f4-990e-27807c7a57f3)
    01/12/2014 12:47:24 [EX2K10] Relinquishing job.
    Any ideas what i can do about this? 

    Hi,
    From your description, I recommend you follow the steps below for troubleshooting:
    Open the problematic user in AD and check the Email Address. Verify if you can open or edit the x400 address. If no, remove the x400 address and recreate it. If yes, ensure that the name is spelt correctly. After that, continue to move the mailbox and check
    the result.
    Hope this can be helpful to you.
    Best regards,
    Amy Wang
    TechNet Community Support

  • Need help with database migration using export/import

    Hi,
    I am planning to do a database migration from 8.0.6 to 10.2.0.4. I am using export/import. Please answer some of my queries:
    1) Do i need to do full export using SYS/SYSTEM user.
    exp80 system/manager file=c:full.dmp log=c:\full.txt full=y consistent=y
    2) Will there be any data corruption while export.
    3) Is export/import the only method of migration/upgradation.
    Please help
    Thanks.

    I'll answer the specifics that I know about your questions, but please look at the post from Srini for additional info:
    1) Do i need to do full export using SYS/SYSTEM user.
    exp80 system/manager file=c:full.dmp log=c:\full.txt full=y consistent=yA full export will move as much information (metadata/data) as possible. In order to do a full export/import, you need to do this from a
    privileged account. A privileged account is one with EXP_FULL_DATABASE for export and IMP_FULL_DATABASE for import.
    2) Will there be any data corruption while export.The data in the objects that you are exporting is being read, nothing is written to user data. I'm not sure what this is available in 8.0.6,
    but if you need a consistent export, look to see if consistent=y is available in 8.0.6. All this means is that the dump file created will have
    consistent data in it.
    3) Is export/import the only method of migration/upgradation.If you are changing hardware, the only supported way from 8.0 to 10.2.0.4, that I know of, is using exp/imp.
    Hope this helps.
    Dean

  • Need help with Windows Migration Assistant, as a window pops up and I don't know what to do?

    Hiya, so I just purchased a macbook pro and I want to transfer files using Windows Migration assistant.
    However whenever I go to do it, the mac connects to the computer and the computer always stays on 'trying to connect to mac'
    and sometimes this windows pops up where it says:
    'Email
    There is no email program associated to perform the requested action. Please install an email program, or, if one is already installed, create an association in the Default Programs control panel.'
    I'm confused as I have an email program on the pc ( Windows Live Mail)
    However I don't know what it means to create an 'association' and I have gone into default programs control panel to try find this associations and have however I don't know how to make this association as I've searched for the program Windows Migration Assistant, however it isn't there and I'm not sure what to do.
    Please help?

    OS X 10.9 Mavericks/ 10.10 Yosemite
      1. Repair Disk      http://support.apple.com/kb/PH5836
      2.  Reset PRAM:   http://support.apple.com/kb/PH14222
    Best.

  • Need Help in Data migration from standard 10g to standard to 11g RAC

    Hi,
    We are running an application in Standard 10g (Not RAC). Our service provider has installed a fresh standard 11g RAC and did not transfer the data from 10g to 11g RAC.
    I want to migrate the 10g data to 11g RAC.
    I wanted to know the followings
    1) Easy data transfer technique (Data Pump or RMAN) & How do I do that (Steps)
    2) How to backup the fresh 11g RAC (In case of errors in data transfer process to recover the base) (How to do)
    Appreciate your help as I only have average knowledge in DBA.
    Thanks.
    Jezee
    Edited by: 991554 on Mar 3, 2013 11:27 PM

    See the 11g Upgrade guide chapter "Moving Data Using Oracle Data Pump" http://docs.oracle.com/cd/E11882_01/server.112/e23633/expimp.htm#i262220
    See the 11g RAC Administration and Deployment Guide chapter "Managing Backup and Recovery" http://docs.oracle.com/cd/E11882_01/rac.112/e16795/backup.htm#i443637
    Get some training on 11g Grid Infrastructure and RAC
    Hemant K Chitale

  • Need help to complete migration of email, Leopard to Snow Leopard

    Several months ago I used Migration Assistant to move my wife's data from a PB G4 to a Mac Air. Now she realizes that she is missing all email prior to a certain date in July of 2011. I still have the PB G4 with all her email up to the date she started using the Mac Air.
    How can I take just the email she did NOT get in the original migration and add it to Mail on her new Mac Air?

    hello,
    maybe this will help, https://discussions.apple.com/thread/1288505?start=0&tstart=0

  • Need help in RFP - Migration Estimates for Crystal Reports from BI 3.1 to 4.1

    Hi,
    I have to migrate 100 crystal reports from BI 3.1 to 4.1. The reports vary from simple to complex in terms of complexity.
    I want to know the time estimates (no. of hours/report) for the above upgradation for a client proposal.
    What all parameters should i mention in the proposal?
    Thanks

    You don't actually have to upgrade the reports to a newer version of Crystal in order to migrate them from BO 3.1 to BI 4.1 and have them work.  BI 4.1 will work correctly with Crystal Reports that have been created in Crystal XI r2 and higher.  The inner structure of the .rpt file is essentially the same, with new things being added when new features from the newer versions are used.
    Some things to remember when migrating Crystal reports using the Upgrade Management Tool (based on my experience migrating a number of clients from 3.1 to 4.x):
    1.  If the reports were saved with a specific printer, make sure that the printer has been configured on the BI 4.1 server.  In 3.1 this was not an issue, but there's a change in printer processing in the newer versions of Windows Server where BI 4.1 will run that cause errors/warnings in the migration of these reports.
    2.  If your reports use ODBC connections, make sure that ALL of the required connections have been created prior to migration.  Even though BI 4.1 is 64-bit software, the Crystal "servers" are still 32-bit, so they require 32-bit connections.  If you're connecting to MS SQL Server, make sure you use SQL Server Native Connection 10.0 or 11.0 for these connections.
    3.  If you have Dynamic Parameters and you've had to make any changes to which DB drivers are used - even if it's in an ODBC connection that has the same name as the old system, be aware that you'll have to create new data connections that use the new ODBC connections or drivers and then point the data foundations to the new data connections - otherwise your dynamic parameters won't work.
    -Dell

  • NEED HELP ON VOIP MIGRATION

    hello,
    We are upgrading our existing cisco 3640 router(with two nm-2v's with three e&m vic and one FXO vic) to cisco 3725 router from the central site. The remote site uses the same 3640 router.
    Before the migration our VoIP connection from two sites works fine. Both sites used cisco 3640(two nm-2v's, three e&m vic's and one fxo vic).
    After we migrated from the central site to cisco 3725 router( one nm-2v installed and two e&m vic) using the same parameters on the cisco 3640 router, we can only get a dial tone from the PBX but can't connect to the local number. We are using IOS Voice on the cisco 3725 router(central site).
    Are there issues on the cisco 3725 to communicate to cisco 3640 router. Our data connection and dial-up for remote users works fine. Only the VoIP link to the remote site.
    Hope you can provide inputs on this problem.
    Thanks,
    udimpas

    Hi,
    In addition, attached is the running configuration of ther cisco 3640 router. Before migration, our VoIP works fine( both ends uses cisco3640 router with same network modules and cvoice cards). The cisco3640 router has 2 nm-2v with 3 E&M cards and 1 FXO card although the FXO has not been used.
    When we migrated to Cisco3725 router on the central site( running configuration attached) using 1 nm-2v with 2 E&M voice cards and IOS Voice, we can only get a dial tone on the remote site but could not dial the local number.
    During the migration we have verified that the Analog E&M Hardware is recognized by the Router using the IOS Voice software by issuing the show version command .
    We have also verified that all voice ports are active and verified the E&M signaling type, Audio implementation, Start dial supervision and dial method by issuing the show voice port command. The show voice port command was issued after configuring all the parameters mentioned. This parameters are based on the current config of the Cisco 3640 router to communicate to the PBX.
    We have assumed the wiring arrangement between the PBX and the voice gateway(Cisco router) to be OK, since it is already running using the Cisco 3640 router.
    We have also verified that the Cisco 3725 router is communicating with the PBX. By issuing the "debug vpm signal command", the supervision signaling or the on-hook/off-hook signals are being transmitted between the PBX and the router by lifting the phone handset and dialing the extension number of the remote site. But we only got a dial tone but could not dial the local number.
    We have checked if the Cisco 3725 router is sending and receiving digits to and from the PBX or if the address information (DTMF digits or Pulse Dial) is being passed between both ends by issuing the "debug vtsp dsp command". But unfortunately the router debugging output shows no signs of digits being send and received between the two devices.
    Hope to have your feedback the soonest possible time.
    Thanks,
    udimpas

  • Hello, I need help with my macbook pro. It looks like I cannot install anything anymore. Everytime I try to install a new software, use the migration assistant or click the lock to make changes, it simply does not react.

    Hello, I need help with my macbook pro.
    It looks like I cannot install anything anymore. Everytime I try to install a new software, I simply get stuck during the installation type process. I put in my password, it does accept it, but it does not go any further.
    I tried to reset the password, put no password, repair the permissions, the disk but nothing will do. I nearly got stuck with the log in screen but finally succeeded in disabling it.
    So I thought I might try to create a new account but I cannot click the lock to make changes. It simply refuses to react.
    I am now thinking about using the migration assistant to save all my settings, data and so fourth, but again I get stuck when I have to type in my password. It accepts it but nothing happens...
    I guess it has something to do with the authorization process, but can't find anything on the internet about it... Can you help me out?
    I am running Lion 10.7.3.
    Regards,
    Nicolas.
    (I apologize if any grammatical/structural mistakes were to be found, english is not my mother-tongue. )

    You probably won't like this suggestion, but I suggest you reinstall Lion.
    First, backup your system. Next, reboot your system, press/hold the COMMAND-R keys to boot into the Recovery HD. Select 'Reinstall Mac OS X'. If you purchased Lion as an upgrade to Snow Leopard, the reinstall process will install Lion 10.7.3. If your system came preinstalled with Lion, you might still get Lion 10.7.2. Both installs are a total install of the OS. None of your apps or data will be impacted. Just the OS.

  • Need Help with Migration...Please

    Hello,
    I need help!  I just bought a new MacBook Pro.  In house, I have a two year old iMac running Mavericks (all updated) and an iPhone and iPad (both running the most current OS).  I also have the iMac connected to a Time Capsule.  Here are my questions:
    1.  As I am not replacing the iMac, but rather adding a MacBook Pro to the mix, should I migrate the software, settings, files, etc. from the iMac to the MacBook?  Is there an issue running computers which are clones in the same environment?  Is it a bad idea to migrate?
    2.  Assuming # 1 is okay to migrate, what is the best way?  Is it best directly from the iMac or from the Time Capsule?  I do have a Thunderbolt to Ethernet adapter on hand. 
    3.  Is there a link that would help me navigate the migration?
    4.  How long should the migration in #2 take?
    5.  Will I need to change any settings on the iMac, iPhone, or iPad afterwards?
    6.  Will my contacts and calendar sync with iCloud automatically, or do I have to change a setting on the MacBook to make that happen?
    7.  Also, as I'm leaving town tomorrow and want to take the MacBook Pro with me and I'm unsure I've the time to Migrate and tweak, can I jus turn on the MacBook (still not turned on), use it as it is, and then migrate when I get back home?
    Any help would greatly be appreciated.  Thank you!

    Hello,
    I need help!  I just bought a new MacBook Pro.  In house, I have a two year old iMac running Mavericks (all updated) and an iPhone and iPad (both running the most current OS).  I also have the iMac connected to a Time Capsule.  Here are my questions:
    1.  As I am not replacing the iMac, but rather adding a MacBook Pro to the mix, should I migrate the software, settings, files, etc. from the iMac to the MacBook?  Is there an issue running computers which are clones in the same environment?  Is it a bad idea to migrate?
    2.  Assuming # 1 is okay to migrate, what is the best way?  Is it best directly from the iMac or from the Time Capsule?  I do have a Thunderbolt to Ethernet adapter on hand. 
    3.  Is there a link that would help me navigate the migration?
    4.  How long should the migration in #2 take?
    5.  Will I need to change any settings on the iMac, iPhone, or iPad afterwards?
    6.  Will my contacts and calendar sync with iCloud automatically, or do I have to change a setting on the MacBook to make that happen?
    7.  Also, as I'm leaving town tomorrow and want to take the MacBook Pro with me and I'm unsure I've the time to Migrate and tweak, can I jus turn on the MacBook (still not turned on), use it as it is, and then migrate when I get back home?
    Any help would greatly be appreciated.  Thank you!

  • Need help migrating Mail/iCal/Address data from 10.3 to 10.7

    Hi, I'm helping a relative migrate from an 8-year old iMac (10.3.9) to a new one running Lion. Mostly it's going to be a clean sweep app-wise, but we need to move iCal, Mail and Address Book data across. Of course, these apps have changed a fair bit in across the last 4 'full' versions of OS X, and the folder structures within the user library no longer match between machines. Can anyone advise me what to copy and what to junk? I appreciate this is a bit of a vague question, but that's the situation. Any help much appreciated. Thanks.

    The webtogo was dropped in 11.x.    so the URL has changed.  This is one of those situations which needs to be handled by support.   Have you filed a request with support yet?
    thanks
    mike

  • Need help with the Exchange migration task (SBS2003 to SBS2011)

    Hi,
    I am currently migrating from SBS2003 to SBS2011.  Here is the environment configuration currently;
    Old Server - SBS2003
    New Server - SBS2011
    DNS is handled by Godaddy and I have DNS records pointing to the single IP issued by our internet provider (MX records, locator, etc).
    My trusted certificate has been resigned and installed on the new server.
    The "configure internet" and "migrate network settings" has created rules on the router for uPNP and pointed 80,443,25, etc to the new servers's internal IP.
    The new server's remote web workplace is functioning and users are able to use the RDP gateway piece.
    I have gotten to the step of the migration wizard - "Migrate Exchange Mailboxes and Settings"
    and this is where I need help.  I am on the step "Remove the Exchange Server 2003 Internet connectors from the Source Server" and I don't find the "SmallBusiness SMTP connector".  I don't want to proceed because I don't
    know much about mail routing and what has or hasn't been done by the rest of the migration tasks.  I think e-mail may already be routed through the new server but I don't know really.
    How should I proceed?

    Hi,
    Just addition. Please also refer to following articles and check if can help you.
    Move Exchange Server mailboxes and settings
    for Windows SBS 2011 Standard migration
    SBS 2003 to SBS 2011 Migration
    Guide – v1.4.0
    If any update, please feel free to let us know.
    Hope this helps.
    Best regards,
    Justin Gu

  • Need Help in Lease Contract Migrations

    hi all,
    Need help in Lease contract migrations in R12 .If any of u gurus can share the same it would be great Help.

    Pls refer following notes:
    R12.1 Lease/Loan Contract Import Interface Guide [ID 960266.1]
    Oracle Lease Management Contract Import Interface [ID 269958.1]
    thanks

  • I had to put my computer by together without migration or time machine I NEED help with order of the files?

    I had to put my computer by together without migration or time machine I NEED help with order of the files?

    Hi, where are these other files exactly?

  • HT201250 I am very frustrated. New to iMac products. Just bought a 27" iMac two days ago. Received no manual, no booklet with ID registration number, etc. Need help migrating PC to iMac. How do I get in touch?

    Need help migrating pc to imac. Do not have manual. Trying to get infornation online, but, cannot get an answer.
    I have downloaded pc migration assistant to pc windows 8 pro. Was able to get imac to finally give me "the number"
    Did the same with pc received number once, not same as imac. Pop up window with info dissappers and cannot recover
    What am I doing wrong? Paid extra for extended support package and it took hours to finally get it registered and approved.
    However, no help. Yikes, I feel like a make another great mistake!

    First: If you purchased AppleCare you should call back at 1-800-APL-CARE and ask for further assistance.  You'll want to learn how to retrieve your operating system version and your IMac's serial number as you'll need these for when you call AppleCare:
    Click on the Black Apple in the top left hand corner of your Imac's physical monitor
    Click on About this Mac from the drop down menu
    Below the silver Apple and "OS X" it will say "Version 10.x.x"  (If this number is not 10.8.4, run Software Update by hitting the button marked "Software Update")
    Click on this number twice in a row.  This is your machine's serial number.  (zeros can be used; the letter "O" is never used).
    http://support.apple.com/kb/HT1349 for details how to find serial numbers on Apple products
    If you have an Apple ID (you can create one at appleid.apple.com), you can login to supportprofile.apple.com, register an Apple product, and sign up for VoicePass, which, if you give your product a name e.g. Maria's Imac, you can speak that over the phone and skip having to give the serial number when you call. 
    If you have an Apple ID, you can also call AppleCare and ask them to activate VoicePass.
    This is the link for your tech specs: http://support.apple.com/kb/SP667
    This is the link for your quick start guide: http://manuals.info.apple.com/en_US/imac_late2012_quickstart.pdf
    This is the link for important product information: http://manuals.info.apple.com/en_US/imac_late2012_quickstart.pdf
    Second: this is an educated guess: Your new Imac and your PC need to be either on the same wifi network or you need to connect them physically with an Ethernet cable (available at Radio Shack, Wal Mart, etc).  My guess is that they are not, and so your IMac and PC are not talking to each other.  That might be why you are seeing a different code on the PC.
    Time Machine would not be relevant to your issue.  http://support.apple.com/kb/HT4796 is the link to relevant instructions, however it left out some housekeeping you should do on your Imac before you begin a migration
    Run Software Update on the IMac to confirm that the latest updates are installed.
    On the IMac, make sure that you have the latest versions of any third-party software.
    On the source Mac, open System Preferences, click Sharing, and make sure there is a name in the Computer Name field.
    Do not let either computer go to sleep while you are attempting to migrate. To disable sleep on the IMac
    Choose System Preferences from the Apple () menu.
    Choose Energy Saver from the View menu.
    Adjust the "Computer sleep:" slider to Never. (Change this back after the migration is done).
    You can adjust "Display Sleep" to a few minutes - this won't affect the migration
    Uncheck the box if checked next to "Put Hard Disks to sleep when possible"
    I don't know Windows 8 but this link looks promising as to how to disable sleep: http://techmell.net/how-to/disable-enable-sleep-mode-hibernate-windows-8/
    Once you've done this, either connect both Mac and PC to the same wifi network and surf the web with each to confirm that connection is working - or connect them to each other with an Ethernet cable. 
    Then relaunch Migration Assistant on your Imac and your PC, and follow the instructions in http://support.apple.com/kb/HT4796 starting with your IMac, or call AppleCare back. 
    Understand that if you have further issues, you'll need to help AppleCare help you by:
    walking them through the steps you've taken in Migration Assistant
    letting them guide you as they isolate the issue to either:
    The Imac's software
    The IMac's hardware
    The PC's software
    The PC's hardware
    Firewall settings (maybe - especially if 3rd party firewalls are installed)
    The wifi connection, if used
    The ethernet connection, if used
    I think the issue is likely what I guessed, or it's a software issue.
    To learn more about your new Mac, I recommend this link: http://www.apple.com/support/imac/intel/
    And this book: http://www.amazon.com/books/dp/0789749890
    I am a technical support professional who troubleshoots Macs all day long.  I do this for a living.  The book above is the most accurate, and easy to understand book I've seen with respect to using Mountain Lion and its various applications.  It's for a MacBook but the focus is on the software which is why I recommend it.
    Don't feel like you have to rush to upgrade to OS X Mavericks.  In fact, you should always confirm both all the hardware and software you use is compatible with any new operating system before you upgrade.  And ask yourself: "why do I need it now?"  Because it's new is not a good answer.
    In the future, specifying any troubleshooting others have done will help those on these boards help you.  Also, don't let a specific issue lead you to assume you've made an all-encompassing mistake.  It's just one issue, and it's resolvable.
    And everyone else: giving a dozen recommendations for reading will only leave the petitioner bewildered.  Start with three.  And try responding with a hypothesis as to what's causing the primary problem!

Maybe you are looking for