Need help in idoc adapter

Hi ,
this is Surya.
can we use idoc adapter at receiver side (i.e receiver- sap Ecc6.0 ) like that normal sap system (4.7)
with regrads,
surya

Hi,
File to IDOC (Creating PO)
/people/ravikumar.allampallam/blog/2005/03/03/creating-purchase-order-idoc-through-xi
File-to-Idoc
/people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping
File To IDOC - Part1 (SLD and Design)
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC&
File To IDOC - Part2 (Configuration):
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC-Part2+(Configuration)&
File To IDOC - Part3 (Steps required in XI and R3):
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC-Part3(StepsrequiredinXIandR3)&
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC-Part3(StepsrequiredinXIandR3)&
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/fileToIDOC&
Troubleshooting File-to-IDOC Scenario in XI
/people/venugopalarao.immadisetty/blog/2007/01/24/troubleshooting-file-to-idoc-scenario-in-xi
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/main&
File to IDOC, trouble shooting
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
No message in found in XI in IDOC to FILE scenario
Regards,
Phani

Similar Messages

Plz , need help on IDOC mapping

Hi friends
I need help on mapping IDOC (invoic02) to a customer fields to be sent to a printhouse .
The idoc contains several Item lines , from 1 and up after for instance
The fields E1EDP01-MENGE and E1EDP26-BETRG could be repeated many times , the customer wants eah line item (quantity , price and subtotal ) in separate lines.
What is the best approach to do the mapping , and how can I loop in the idoc segments in order to get each line separetly.
Many thanks in advance.

Hi
Thanks again , plz bear with me as i am new to this kind of assignment.
This is a part of my requirement, so i suppose that I have to create a Data type as node for the customer fields corresponding to the node in IDOC and just map the source node to the target node , and it will repeat it self as many times as there is line items in the sales order.
Customer fields              Idoc fields.
                    segment E1EDP01
DETAIL_ANTAL     E1EDP01-MENGE - LOOP
                     segment E1EDP26
DETAIL_STK_PRIS     E1EDP26-BETRG - QUALIFIER = 001- LOOP
DETAIL_SUBTOTAL     E1EDP26-BETRG - QUALIFIER = 003 LOOP
If I change the context of the source, will it not affect the source node at all.
best regrads.

Need Help on FTP Adapter Archival Process

Hi Guru's,
I implemented FTP Adapter for Inbound Operation to read the file from inbound directory and after reading the file should be archived in Archival Directory and Delete the file from directory from inbound directory.
In my case file is successfully picked from inbound directory and records inserted in to database table. File is not Archiving in Archival Folder and File deleted from Inbound Directory. Here I need to Archive the files in Archival Folder.
Thanks in Advance
Could you please help me in this regard and Please provide pointers to me

<property name="UseRemoteArchive" value="true"/>
Set this property to "true" to notify the Oracle FTP Adapter that the archival directory is on the same FTP server. If set to "false", the Oracle FTP Adapter uses a local file system folder for archival.
for more Information here to go : http://docs.oracle.com/cd/E15523_01/integration.1111/e10231/adptr_propertys.htm#CHDEDJEA
Regards,
MS Raghava

Need help in Idoc--very urgent.

Hi guys,
i am working on an object where i need to post the data from legacy system to F-27 transaction using Idoc.i hv found two idocs input_idoc_fidcc1 and input_idoc_fidcc2 for posting the data..
Can anyone help in finding the right idoc for triggering the f-27 transaction with the reason...
coz both are perfoming almost the same functionalities...
its very urgent guys..
kindly help me full marks wud be given...
regards
Sahil

Hi,
The function module is related to post the idoc type FIDCPP01
and posts the complete FI document. and as coming to second function module along with Tax you can post item wise with holding tax dataalso. So you choose the required function module based on the data you need to post. If you need not post with holding tax details dont fo for second function modules.
Reward if find useful

Need Help in Creating adapter module for SFTP Sender in NWDS

Hi experts,
I have a scenario where i should write an adapter module for SFTP sender in NWDS.. need your help in achieving this..

Hello,
>>i have followed the procedure of FTP but, adapter is not picking the file
Make sure u have written proper expression to pick file.
>>do we have any different adapter parameters for SFTP... the input file is .csv..
I don't think there are any specific parameters needed for SFTP (but in case u are reading file name in AM then u might have to adjust SFTP namespace)
Thanks
Amit Srivastava

Need help on IDOC to file interface.

Hi Folks,
I am working on IDOC to file Interface. We are pushing 15 Idocs from SAP R/3 system to SAP PI. Idocs in R/3 system are in correct order. When it comes nto PI system IDOC order is diffrent.
For Example : I am sending 6 idocs 1000, 1001,1002,1003,1004,1005 from R/3 system. WHen these idocs coming into PI its order is changing so in PI system IDOCS order is 1000, 1004,1001,1005,1002. But, I want IDOCS are should be same as R/3 system.
For handling this issue, what are the necessary steps I need to follow in PI?
Thanks,
Enivass

Hi Enivas,
Check this link regarding serialing IDOC: http://help.sap.com/saphelp_nw04/helpdata/en/bd/277264c3ddd44ea429af5e7d2c6e69/content.htm
http://www.saptechnical .com/Tutorials/ALE/Serialization/page1.htm
Thanks,

Need help for IDOC inbound function module !

Hi guys please help me to create a IDOC inbound function module.
What are the parameters and tables.
How to write the code.
What it does.
Please send me one inbound func module code if possuble
Thanks

Hi,
You need to create an inbound function module. Then define the process code in transaction we42 and attach the function module to this process code.
In the function module you create you need to define tables of types EDIDC (Control record (IDoc)), EDIDD (Data record (IDoc)) and BDIDOCSTAT (ALE IDoc status (subset of all IDoc status fields)).
Regards,
Soumya.

Need help - The network adapter could not establish connection

hi, I installed sql developer on my standalone PC. I am unable to create a connection. The following error is shown when try connecting:
IO Exception: The network adapter could not establish connection.
Should i set some Environment variable? Is there anything else i need to download/install?
Please help...! I am new to this...

user11937618 wrote:
hi, I installed sql developer on my standalone PC. I am unable to create a connection. The following error is shown when try connecting:
IO Exception: The network adapter could not establish connection.This means that the software being used, was unable to use your PC's networking to establish communication with the database server.
You need to ask your network admin folk to check your PC and ensure that it is correctly configured for IP networking for your network - valid IP address, valid IP subnet mask, etc.
You can look at your existing IP configuration in Windows by opening a command console and typing the command "+ipconfig+".
Once that is done, you need to test connectivity between your PC and the database server. You need the IP address of the server for that and use the "+ping+" command to see if you get a ping echo response from the server.
If you configure your Oracle client software (e.g. +%ORACLE_HOME%\network\admin\tnsnames.ora+ ) to use a hostname and not IP address, you need to make sure that your PC's IP stack can resolve that hostname into an IP address. Once again the "+ping+" command can be used, but this time using the hostname instead. The output will show the IP address the hostname resolved to.
All these are basic networking issues - and have nothing really to do with Oracle itself. You first need to get the networking to work on your PC, before attempting to use Oracle client-server.

Need help changing an Adaptive RFC Model in WDJ

Hello All,
We have an existing application with few custom BAPIs are called. However we added few fields added to the custom BAPI. We could not figure out how to bring the new fields show up in used Model and context.
Any Help greatly appreciated.
Thanks.
PK

Hi ,
The following link help you.
Importing Models Using the Search Console - Developing Java Web Dynpro Applications - SAP Library
SAP Library - Development Manual
Now to call the FM you have to follow the steps:
1)In NWDS click on models->then right click it select import Adaptive RFC model
2)Here gave the name of the Model , package etc and the names of the JCo Destinations tht will be needed to call from R/3.
3)Give the Information abt the R/3 Host and username password of the R/3.Press Next
4)Now search for the Bapi you want to Use. Select it Press Next
5) press Finish. You have imported a Bapi from R/3.
Now you can play around with it according to your requirement..
You need to create the Context, Views to show the Data of the Bapi.
Hope this helps you out.
Thanks & Regards,
Durga Rao

Need help with IDOC CREMAS_03 mapping

i was not able to figure out what values to assign to the following mandatory fields.
BEGIN
EDI_DC40(node not mandatory)
SEGMENT
TABNAM
DIRECT
IDOCTYP
MESTYP
SNDPOR
SNDPRT
SNDPRN
RCVPOR
RCVPRN
i am trying to map the following structure to the CREMAS_03
Vendor_MT
VendorNumber
LastName
SearchTerm
Currency
Address
Street
City
Zip
Country
i appreciate ur time and help

you dont need to map EDI_DC40, In the message mapping right click on the EDI_DC40 segment and click on disable field.
In the IDoc receiver communication channel, you should uncheck <b>Apply control record values from payload</b>
regards
SKM

Need help in file adapter configuration

Hi,
i am working on sps13 . while i am configuring the file adapter for sender communication channel i got a compulsary field "Queue Name" in processing
parameters . what should i make entry in that field ? plz....do reply.
Thanks in advance.

Hi Lakhman ,
The parameter QualityOfService specifies how the Integration Engine should process a message. The following values are permitted:
1)BE(Best Effort: synchronous processing). If QualityOfService is BE, the client is sent the final status for the processing.
2)EO(Exactly Once: asynchronous processing with guaranteed execution exactly once). If QualityOfService is EO,processing occurs asynchronously and the client only recieves a confirmation of reciept with HTTP status '200'.
3)EOIO(Exactly Once in Order: asynchronous processing using queues, that is, guaranteed execution exactly once and maintaining the sequence of successive messages). If QualityOfService is EOIO,processing occurs asynchronously and the client only recieves a confirmation of reciept with HTTP status '200'.
Since u had choosen EOIO ,You must also define a queue name for EOIO:
XI.QueueId=<QueueName>
This queue name is used in the Integration Engine to process messages in the same sequence that they arrived in.
This QueueName can consist of a maximum of 16 characters. If the first 8 characters contain 'SAP_ALE_', these r removed since this value is reserved by SAP and used internally.
If a value is not specified for QualityOfService , the default value 'BE' is used.
These r following websites which u wil find helpful:
http://help.sap.com/saphelp_nw04/helpdata/en/0d/00453c91f37151e10000000a11402f/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/8f/d906d01f77fa40a4c84683c3f8326f/content.htm
http://documentation.softwareag.com/crossvision/xie311/admin/config.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a8424011-0d01-0010-e19d-e5bd8ca52244
Reward Points if u find it useful.
cheers!
gyanaraj
[email protected]

Need help in file adapter file format

While accessing an exeL (.xls)file as input using file adapter what will be the format of the sample file. If i give .txt then it is not showing any column.

BPEL cannot read excel files without some custom java code. If you want to do just pass through you can use opaque message type.
If you need to do transformation your file needs to be text based. So if you convert you xls file to a csv file you will be fine. Renaming the extension is not enough.
There are many solutions out there for reading excel files.
cheers
James

Need help in DB adapter

please help in creating a DB adaptor service using BPEL.
Send some URL. i am using olite not oracle databse so the typical oracles's example is irritating....

Sam is right, you don't need to use the dehydration store for you testing. I would also stay away from using olite as the jdbc drivers aren't that flash and you may encounter issues. Oracle XE is a good light weight DB to use, plus it is based on the enterprise edition DB so it can be easily upgraded if possible.
3rd Party db also supported but require some additional setup.
http://otndnld.oracle.co.jp/document/products/as10g/101310/doc_cd/integrate.1013/b28994/adptr_db.htm#sthref578
cheers
James

Need Help on IDOC ACK

Hi,
i Have a doubt on ACK of IDOC.actually the scenario is file to IDOC.in this scenario we are posting PO's to SAP R/3 from a legacy system.after posting into SAP system we want to get an acknowledement back to the legacy system.for that ack which idoc type we'll use in the scenario IDOC to File?

Hi Narayna
Find the solution.
This Feature is Available under SP 18 and we are on SP16
http://help.sap.com/saphelp_nw04/helpdata/en/42/c8f66bc7a56bb0e10000000a1553f6/frameset.htm
Check this document on handling IDOC acknowledgements. This might give you some pointers.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f6d2d790-0201-0010-9382-b50b499b3fbe
nk
http://help.sap.com/saphelp_nw04/helpdata/en/44/932e8896b610bbe10000000a422035/content.htm
<b>Pls reward if useful</b>

Need help in IDOC Creation

Hi Guys,
I need to create a Vendor Master using LSMW via IDOC Process..What are all the points needs to consider..
Thanks
Prabhu

In LSMW object attributes... give like this..
Message Type CREMAS Vendor master data distri
Basic Type CREMAS04 Vendor master data distri
Enhancement
after that continue normal LSMW procedure.

Need help in idoc adapter

Similar Messages

Maybe you are looking for