Need help in migration from Layer2 to layer3

HI Guys
Need u r help in migration from layer2 switched network to layer3.
here is the setup there are 9 sites connected with a 10gig backbone in a ring.each site has a 6513 but at the data centre site we having two 6513.we are having a combination of voice and data vlans.at present all the sites are connected with layer2 trunks.all the trunks are teminated at the core ie datacentre site.so how should i procedd and what are the advantages of it ie migration.
Thanks
Mahmood

For this migration you first need to assign IP addresses to your connections between switches. This could be /30 (or /31, if supported) subnets. You should also consider running some dynamic routing protocol such as OSPF between switches.
Hope this helps.

Similar Messages

Need help in migration from J2EE1.3 to J2EE1.4!!

HI,
I'm very new to java technology. I want to know for migrating an application from j2EE 1.3 to J2EE1.4 what all changes i'll have to make to my existing application.
Please answer it as soon as possible.

Start with recompiling.... ;)
But seriously, You could take advantage of some new stuff, but your old stuff should work fine in most cases, unless you're doing something goofy like implementing (not just using) the jdbc apis or something.

TS1389 I need help removing UAC from itunes..

I need help removing UAC from itunes so it will not allow me to open itunes. Everything I have read from other comments that you shouldn't turn off your user account control. I just to be able to open itunes. Can anyone help me with this problem?? Greg, ogrady612@yahoo,com

I had this problem too but you do not need UAC to be turned on.
Click on start and search for 'uac' in the search box at the bottom and click on 'Change User Account Control Settings' when it comes up. Move the slider to the bottom when the window appears and save the changes and your done!
It's worked for me and my uac has been off for months without causing me any problems!
Hope this helped

Need help coping project from one computer to another.

I need help coping project from one computer to another. I loaded all video on computer 1, copied events and project folder to computer 2. I was told I only needed to copy the project folder back to computer 1 since the events folder is already there. I copied project folder back to computer 1 but the files wont open. I dont have computer 2 available.
Please help!!!

Hi
No that's not the way to do it - iMovie gets confused and in some cases the problems might be un-repairable.
You've got several problems
• iMovie'08 - CAN NOT MOVE PROJCTS - You NEED iMovie'09 or iMovie'11 - I see no other working solution
• Never MOVE or alter any folder named
iMovie Projects - or -
iMovie Events
on DeskTop/Finder - This might be very harmful
• Moving (Projects) and Events - HAS TO be done within the iMovie Application.
You've got an Evets window and here You can view Your Events in two ways - Yearly - or - Yearly per Hard disk
Here You can move within this "window" to another location
• Projects - NO they do not contain Your full movie - only a document on howto use the material in Event folder
and there might be worse if You added Photos from iPhoto and Audio from iTunes/Garageband - then You have
to get this over to the second Mac too, to be able to continue editing.
So to move Your projects to another Mac You need
• iMovie'09 or 11
• an external hard disk -
MUST BE Mac OS Extended formatted - as UNIX/DOS/FAT32/Mac OS Exchange will not work for VIDEO
Should be a FireWire one - as UBS/UBS2 performs badly when used for video
• Then move/copy over within Project resp Events window in iMovie Application
Hopefully I've been not to confusing or badly structured to be followed.
Yours Bengt W

I need help removing CS3 from Windows 7 so I can reinstall

I need help removing CS3 from Windows 7 so I can reinstall

Before trying to remove try re-installing CS3 right on top of the current install. Often re-installing Photoshop on top of itself fixes the install. If it does be sure to apply the cs3 updates.
Download Adobe CS4 and CS3 Free Trials Here (incl. After Effects) | ProDesignTools
your product key can be retrieved from here https://www.adobe.com/account/my-products-services.html
use these links for the updates.
Adobe - Photoshop : For Macintosh
Adobe - Photoshop : For Windows

Please i need help with switch from the us store to malaysian store how i can switch

Please i need help with switch from the us store to malaysian store how i can switch

Click here and follow the instructions to change the iTunes Store country.
(82303)

Need Help with Migration...Please

Hello,
I need help! I just bought a new MacBook Pro. In house, I have a two year old iMac running Mavericks (all updated) and an iPhone and iPad (both running the most current OS). I also have the iMac connected to a Time Capsule. Here are my questions:
1. As I am not replacing the iMac, but rather adding a MacBook Pro to the mix, should I migrate the software, settings, files, etc. from the iMac to the MacBook? Is there an issue running computers which are clones in the same environment? Is it a bad idea to migrate?
2. Assuming # 1 is okay to migrate, what is the best way? Is it best directly from the iMac or from the Time Capsule? I do have a Thunderbolt to Ethernet adapter on hand.
3. Is there a link that would help me navigate the migration?
4. How long should the migration in #2 take?
5. Will I need to change any settings on the iMac, iPhone, or iPad afterwards?
6. Will my contacts and calendar sync with iCloud automatically, or do I have to change a setting on the MacBook to make that happen?
7. Also, as I'm leaving town tomorrow and want to take the MacBook Pro with me and I'm unsure I've the time to Migrate and tweak, can I jus turn on the MacBook (still not turned on), use it as it is, and then migrate when I get back home?
Any help would greatly be appreciated. Thank you!

Hello,
I need help! I just bought a new MacBook Pro. In house, I have a two year old iMac running Mavericks (all updated) and an iPhone and iPad (both running the most current OS). I also have the iMac connected to a Time Capsule. Here are my questions:
1. As I am not replacing the iMac, but rather adding a MacBook Pro to the mix, should I migrate the software, settings, files, etc. from the iMac to the MacBook? Is there an issue running computers which are clones in the same environment? Is it a bad idea to migrate?
2. Assuming # 1 is okay to migrate, what is the best way? Is it best directly from the iMac or from the Time Capsule? I do have a Thunderbolt to Ethernet adapter on hand.
3. Is there a link that would help me navigate the migration?
4. How long should the migration in #2 take?
5. Will I need to change any settings on the iMac, iPhone, or iPad afterwards?
6. Will my contacts and calendar sync with iCloud automatically, or do I have to change a setting on the MacBook to make that happen?
7. Also, as I'm leaving town tomorrow and want to take the MacBook Pro with me and I'm unsure I've the time to Migrate and tweak, can I jus turn on the MacBook (still not turned on), use it as it is, and then migrate when I get back home?
Any help would greatly be appreciated. Thank you!

I need help transferring files from a locked admin account

I was having trouble connecting to my school's wifi because I couldn't remember my admin password to authenticate the changes. I created a new admin account, and connected to the wifi. I didn't realize by doing this all of my files would be on the old admin account. Now I am completely locked out of the account, and need help getting my files off of it! Any ideas?

Migrating from PPC Macs to Intel Macs:
https://discussions.apple.com/docs/DOC-2295
http://support.apple.com/kb/HT4796
and this article:
http://www.macworld.co.uk/mac/news/?newsid=3444778&olo=email

I DESPERATLY NEED HELP TRANSFERING SONGS FROM IPOD TO ITUNES LIBRARY

hi my computer crashed downstairs and i need help moving all my songs from my ipod to my itunes library, on the other computer...will someone please help me?

Hello Markatkis,
Make sure your not connecting it to more than one PC. A new iPOd is set to "Auto Update" by default. With this setting all you do is plug the iPOd into the PC and iTUnes automaticly opens, loads all the songs it has listed in iTunes to the iPod, and after its done, ejects the iPOd.
If you connect it to another PC tho with iTUnes on it you usually get a promtp that in short says "iPOd library linked to another PC, do you want to link to this one" if you click yes, it wipes the iPOd clean and loads only whats on that PC.
Since your new to all of this a great place for you may be the "iPod 101" site. It will show you all the bacis ropes of using your iPOd, using iTUnes, and using them both together. http://www.apple.com/support/ipod101/

Desperately needs help burning DVD from iPhoto

I am using iPhoto 6.0.6. I desperately need help burning a DVD of a slide show that I created for my daughter's wedding.
I put several songs together by opening them and then combining them using QuickTime Pro. I imported the audio into iTunes and created a slide show using iPhoto. The slide show is perfect! The slides are finally in sink with the music just as I want them! But I don't know how to burn the slide show as a DVD.
I tried exporting the video from iPhoto to my computer, but at the end of the export, I get this message: please note that the music included in the slideshow can only be played on authorized machines. And when I try to play the video (after the export), most of the music on the video cannot be heard. When I try to authorize my machine, I am told that it's already authorized.
If someone would send detailed instructions on how to proceed, I would greatly appreciate it.
Greg

Is your problem the DRM audio tracks you purchased from iTunes store?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There's now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

I need help restoring data from my time machine.

1) On the time machine, where do I find the TRASH file that is located on the dock in my desktop? I'd like to restore that to a prior date but can't find it.
2) I DID A VERY BAD THING & need help to get back to where I was before. I wanted to delete files that were taking up lots of space. My OTHER section was using 160G. I downloaded OmniDiskSweep and found that 120G was being used by my virtual machine (I run Quicken in Windows, through VMware). I started to delete files that were called Snapshots assuming these were the snapshots that the program regularly takes of my files. Apparently they were not. I also deleted the program Windows XP Professional because that was never used. When I try to open VM or quicken program, it says it is missing a particular snapshot, i.e. Snapshot 11104. I deleted about 20 of these. I left all the other files that said Windows XP Home Edition. But now it shows that I only have the Professional Edition, even though that's what I deleted. I'm trying to restore from Time Machine and it looks like the information is not there - I've tried various different backups and nothing seems to have the information I need. The earliest back up I have is from 5/7 when I started time machine on a new external 1TB HD. Would that have the information I need since it's the very first back up? Please Help.

I am assuming it's real data because it's taking up storage on my HD. It falls in the category "other" and the total of this section is 160G. Here is a snapshot of the virtual machine.
I also took a shot of the VM snapshots & it tells how much space is being taken up by the snapshots.
I've now changed the number of snapshots taken down to 12 (didn't know I had this option) & I can delete alot of the 21 snapshots that have already been saved. I have no idea how much of the HD was set aside for the VM because someone else installed it for me 5 years ago. I've had enough problems with it over the years that I've wanted to switch to Quicken for Mac or find another financial program to use. I've upgraded the VM 2x over the years, but didn't want to spend $100 for Version 5. I understand the concept of a VM but that's about all.
I did do the disk cleanup in Windows on the C drive. I deleted 700 MB of temporary files and then compressed 4G of data down to 2G. While the cleanup was progressing it said that the C drive was 30.99G and 78% of it was free. That just doesn't make sense to me. It recommended a defrag, so I did that also.
I'm pretty sure it's real data because I recently had to switch from a 320G external HD for TM, to a 1T HD. One TM backup was over 300G which I found to be excessive because I basically use my computer for mail, some word processing, and my financial data.
Thanks again for all your help. I really appreciate it.

I need help please, upgrading from OS 10.6.8...

Please help me - I'm such a technophobe!! I need help upgrading from OS 10.6.8... I get part way through the process and get a box saying "The link needs to be opened with an application" and I don't know what to do next...

The only way to upgrade from 10.6.8 (which is high as Snow Leopard goes) is to obtain Lion or Mountain Lion from the Online Apple Store or Yosemite from the Mac App Store.
The requirements for Lion are:
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Lion is available in the Online Apple Store ($19.99). Mountain Lion (10.8.x) is also available there at the same price (though it's reported to have been removed from sale in some countries so may well cease to be available generally) but there seems little point as the system requirements are the same for Yosemite (10.10.x) - which is free - unless you need to run specific software which will run on Mountain Lion only. Mavericks (10.9.x) is no longer available.
The requirements for Mountain Lion and Yosemite are:
OS X v10.6.8 or later
2GB of memory
8GB of available space
and the supported models are:
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
Xserve (Early 2009)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
Yosemite is available from the Mac App Store (in Applications). Mountain Lion can be obtained the Online Apple Store.
You should be aware that PPC programs (such as AppleWorks) will not run on Lion or above; and some other applications may not be compatible - there is a useful compatibility checklist at http://roaringapps.com/apps:table

Need Help:Reading Data from RU payroll cluster for table GRREC

Hi...
I need help on how to read data from RU cluster table for table GRREC for the employee & run date and get the value from structure PC292 .
Please let me know about the includes and the import and export statements to be used.
Thanks in advance,
RAVI.

Hi,
Here goes pseudocode
Includes:
include: rpppxd00    ,
            rpppxd10     ,
            rpc2cd09     ,
            rpc2rx02_ce , "if ldb pnp_ce is used else use the same include with out _ce
            rpc2rx29      ,
            rpc2rx39      ,
            rpppxm00    ,
            rpc2ruu0_ce ,
Declare:
DATA : i_rgdir   LIKE pc261        OCCURS 0 WITH HEADER LINE     ,
           i_result TYPE pay99_result OCCURS 0 WITH HEADER LINE ,
           i_grrec   LIKE pc292           OCCURS 0 WITH HEADER LINE .
start-of-selection:
GET pernr.
Get the RGDIR VALUE for the current PERNR & selected Molga
get rgdir data TABLES i_rgdir
                      USING pernr-pernr
                                 p_molga " parameter
CD-KEY-PERNR = PERNR-PERNR.
RP-IMP-C2-CU.
i_rgdir [] = rgdir[].
LOOP AT i_rgdir WHERE fpbeg LE pn-endda
                    AND fpend GE pn-begda
                    AND srtza EQ 'A'
                    AND void   NE   'V'.
get_result_tabs   TABLES i_result
                               USING 'RU'    " US cluster
                                     pernr-pernr
                                     i_rgdir-seqnr
      RX-KEY-PERNR = PERNR-PERNR.
      UNPACK i_RGDIR-SEQNR TO RX-KEY-SEQNO.
      RP-IMP-C2-RU.
i_grrec[] = i_result-inter-grrec[].
LOOP AT i_grrec.
case i_grrec.
use wage types required here and pass the data to output table.
endcase.
endloop.
endloop
end-of-selction.

Need help on emailing from java

I need help on how to send an Email from a java application.
Can any body help me by providing correct code for that?
Thanks!

It worked.Thanks!So, are you gonna award the Dukes to prometheuzz or are you donating them to the forum pickle jar?
db

Need help getting contacts from outlook 2010

I need help getting my contacts from outlook 2010 to icloud and/or my iphone. I have icloud up and logged in on pc. when I go to a contact to import it says there was a problem reading the vcard. any help is welcomed.

I do have the latest version of DTM and working with OUTLOOK 2000. I know it is old, but it still does what I need it to. I did try to uninstalland reinstall. No luck. The only options listed to sync are yahoo, outlook express, and ASCII inport/export. Obviously it is not syncing my other data either, but it is my contacts that I am most concerned with at this point. The calader would be nice too! Any other suggestions, or is my outlook too old to sync?

Need help in migration from Layer2 to layer3

Similar Messages

Maybe you are looking for