Need help in modifying the Calls by the Telemarketing agent

Hi Group,
I am facing issues while updating the calls using the Function module 'CRM_CLM_CALL_MODIFY'.
the business requirement is as under:
- a program needs to be built which will take the calls from all the Call lists from the Current week and has to update these
calls by using by a certain field called 'CALL_RESULT' of the Sturucture 'CRMS_CLM_CALL'.
- I have collected all the Calls but while using the Function module 'CRM_CLM_CALL_MODIFY', I was not getting any
exceptions, but still could not the see the updation being done to the calls in the Call lists.
In the CRM system also, there is no sign of this Function module being used and in the SAP Market place also I could not get a proper answer/notes to this query.
So please let me know your inputs on this to proceed further on the updation part.
Thanks for the help in advance.
Regards
Vishnu.

Hi Group,
This can be resolved by creating the Implicit enhancement and adding the required functionality.
Regards,
Vishnu.

Similar Messages

I NEED HELP!! Been calling since the end of Nov and being charged for a Warranty device. The device was returned the next day!! Been calling twice a week.. NEED RESOLUTION

I NEED HELP!! Been calling since the end of Nov and being charged for a Warranty device. The device was returned the next day!! Been calling twice a week.. I NEED HELP 6 TCC TICKETS HAVE BEEN OPENED - PROMISED CALLS BACK AND NEVER GET CALLS.
About to cancel my account and move to AT&T
TCC TICKETS: (removed)
I am trying here for the last resort. After this evening my account along with my business account will be cancelled. Total lines that Verizon will have lost will be 93 lines.
PLEASE SOMEONE JUST HELP ME!!!!
I already tweeted and facebook messaged Verizon. Your CS group has gone down hill over the last 3-6 months. I use to enjoy being a customer.
>> Edited to comply with the Verizon Wireless Terms of Service <<

not all the lines have ETF's. I have 30 tablets and the rest phones. The phones have ETFs and the tablets are all month to month.
The total to move my account over is going to come out to about $8500.
Rep has been trying to get my business for years. I was always loyal to Verizon until this happened.

Need help in modifying mapping parameters of out the box mapping

Hi There,
I am a new bee to dac.
Need help in modifying mapping parameters of out the box mapping, which is invoked by DAC task.
We got a requirement to edit mapping parameter. When I go and see parameter under mappings tab in a mapping, I could not see any values in it.
But when I set any value, and validate it. It is successful.
Is it right way to do it?
What my concern is, When I initially go and see parameter values under maapings tab in a mapping, they are blank.
Where is it storing these values?
Thanks,
Rag

If you modify mapping then u have to create new task in dac and dac itself craete parameter file at run time. if you want to add more parameters then do it in dac system parameters tab.
Thanks
Jay.

I have an iPhone 6. For the first two weeks my bluetooth worked fine but then started having issues. Now, although it shows that it is connected to Bluetooth, I can't hear any of the calls. The radio continues to play. Please help!

I have an iPhone 6. For the first two weeks my bluetooth worked fine but then started having issues. Now, although it shows that it is connected to Bluetooth, I can't hear any of the calls. The radio continues to play. Please help!

Hello there, Srushevics.
It sounds like you may be having issues with the connectivity of your iPhone with the Bluetooth in your vehicle. The following Knowledge Base article offers up some great steps for troubleshooting that Bluetooth connectivity with your iOS device:
If you can’t use a Bluetooth accessory or car kit
To resolve the issue, you'll need to first sign in to iCloud and review your devices:
Sign in to iCloud on your iOS devices and Macs with OS X Yosemite (available this fall).
On one of your devices, tap Settings > Bluetooth and look under My Devices. You'll see all devices that are connected to Bluetooth, but make sure that you see your Apple devices that are signed in to iCloud and are using iOS 8 or OS X Yosemite.
Sign out of your iCloud account from any devices that you don't want to use. To sign out of iCloud on an iOS device, tap Settings > iCloud > Sign Out.
Then, remove any inactive devices from iCloud:
Sign in to iCloud.com.
Select Find My iPhone.
Select any devices that aren't active anymore.
Wait for Find My iPhone to stop trying to find the inactive device.
You should see the option to remove this device from your account. Select it to remove the device.
After following the steps above, restart the device with the issue. Then try to use it with your Bluetooth accessory.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

New airport user need help setting up a pc on the network

went and bought a airport extream today and my mac works fine on it but i also have a pc and need help getting it to work with the airport express. it seems to see the airport in the network slection screen but after i put in the pass i get nothing and it returns to the "chose a wireless network" can anyone help?

Thanks for the reply.
That's interesting, I guess I had assumed that would be a basic thing.
Right now the 4000 number is in port 1, and then 4244 is in port 2. So if no one else is on the phone, and my boss picks up his phone, dials 9 then XXX-XXXX, he will be routed outbound on the 4000 line on port 1. Then while he's talking, if I pick up the phone and dial 9 then XXX-XXXX, I will be routed out on the 4244 line on port 2.
Am I understanding that correctly?
If that is the case, then that is a bit frustrating. Our 4000 line has everything on it, call waiting, caller id, long distance, etc. But the 4244 line is just a basic service. So if I'm calling local or toll free, I don't want to tie the other line up in case someone else needs to make a long distance call to a client. Is there any work around to that at all? Is there any way to use steering digits to point the call to the right line? Would we have to put the PSTN lines on seperate SPA400's?
Again, any comments and suggestions are much appreciated!
Message Edited by VoIP_Me on 07-30-2008 06:27 AM
Message Edited by VoIP_Me on 07-30-2008 06:28 AM

I need help, yesterday I installed and reinstalled the Yosemite system and take long to turn on my laptop, the bar takes to fill, and I'm worried. Can you help? thank

I need help, yesterday I installed and reinstalled the Yosemite system and take long to turn on my laptop, the bar takes to fill, and I'm worried.
Can you help? thank

revert back to Maverick that is what I had to finally do. This was the worst upgrade I have ever seen. Hopefully you have Time Machine backup and can revert back. It was pretty painless except for a few issues. I will wait until Apple gets their stuff together on this upgrade or may never will.

Hi i need help one of my key on the keyboard dosen't work for some reason please help

hi i need help one of my key on the keyboard dosen't work for some reason please help

try smc reset
http://support.apple.com/kb/ht3964
and Pram reset
http://support.apple.com/kb/ht1379
(Try pram a few times to get correct sequence)
Check what you have selected in
system preferences/system/accessibility/keyboard
and system preferences/hardware/keyboard (keyboard and keyboard short cuts tabs)

I need help writing a script that finds the first instance of a paragraph style and then changes it

I need help writing a script that finds the first instance of a paragraph style and then changes it to another paragraph style. I don't necessarily need someone to write the whole thing, by biggest problem is figuring how to find just the first instance of the paragraph style. Any help would be greatly appreciated, thanks!

Hi,
Do you mean first instance of the paragraph style
- in a chosen story;
- on some chosen page in every text frames, looking from its top to the bottom;
- in a entire document, looking from its beginning to the end, including hidden layers, master pages, footnotes etc...?
If story...
You could set app.findTextPreferences.appliedParagraphStyle to your "Style".
Story.findText() gives an array of matches. 1st array's element is a 1st occurence.
so:
Story.findText()[0].appliedParagraphStyle = Style_1;
//==> this will change a paraStyle of 1st occurence of story to "Style_1".
If other cases...
You would need to be more accurate.
rgds

Caller doesn't hear a ring back if the call is ringing on agent phone

Hi team,
can anybody help me? Here in Germany there are a lot of customers that don't understand why the caller doesn't hear a ring back when the call is ringing on agent phone for instance with UCCX 8. I read some discussions here for that issue but the only solution for that should be to change the MOH on CUCM. This is not a very good solution when the call in queue is set to hold he will hear the ring back tone in the queue as well :-(
Has anybody another solution for that issue???
All the discussion I've read was for IPCC version 4 or so. Is there another solution for this issue in version 8.x
In one discussion I found the following solution:
Yes, To resolve this issue,Set up a Send H225 User Info Message service parameter for Cisco CallManager service in CallManager. Perform the following steps:
In Cisco CallManager Administration, select Service > Service Parameter.
Select the correct server from the drop-down list.
Set the service to Cisco CallManager.
In the Send H225 User Info Message field, under the Cluster Wide Parameters (Device - H323) section, select H225 Info for Ring Back.
Reset the H.323 voice gateway.
After completing this procedure, the caller hears ring back when the agent phone is ringing.
Does it realy work?
Need you help!
Thanks in advance.
Tobias

Hi Tobais
you right one of the solutions is to change the MOH to the ring back one
however there are two types of MOH that you need to select
use MOH is the music to be played while the call on hold/ in queue
use Network MOH which is the oneyou need to change to the ring back MOH source file so when the call get transferred to an agent ring back MOH will be played
these options under the CTI ports in UCCX
also you can search the forum here and there are many discussions about this topic
HTH
if helpful Rate

Need help to restore my caller ID on new replaced sim card... iphone network won't switch feature on

Need help to restore my caller ID on new replaced sim card... iphone network won't switch feature on

cathorio wrote:
I recently changed my lap top. My problem is the new lap top won't accept my apple I D it asked me to sing up for a new one which I did.
I am puzzled by this. The laptop doesn't need the Apple ID - but iTunes does. I could be missing something but ....
Why would you not be able to use your existing Apple ID and iTunes account on a new laptop? If you authorized the computer - you should be able to use your existing account - unless you already had 5 computers authorized with the existing ID - and that was why iTunes would not accept the ID. However, I'm sure that you would have received a popup message from iTunes telling you that you had reached the limit.
I just received a new MBP and my daughter did as well. My entire family shares an Apple ID and we had no issues at all with my Apple ID and iTunes on our new computers and I did not have to sign up for a new account. Did you even try the old ID?

The call was cancelled by the caller before the remote party answered

Hi,
We have a Lync 2010 Enterprise deployment in a single site with 2 FE and Mediation Server collocated.
When dialling a number from a PSTN phone the call gets routed via our PBX/PBX Gateway/Mediation Server/FE Server to the desktop Lync client successfully.
As soon as the user answers the call with the Lync client the call 'hangs' and terminates without hearing anything on either side.
The snooper logs show:
Error:
SIP/2.0 487 Request Terminated
Partial Content:
User-Agent: UCCAPI/4.0.7577.4398 OC/4.0.7577.4398 (Microsoft Lync 2010)
Ms-client-diagnostics: 52092;reason="The call was cancelled by the caller before the remote party answered"
Content-Length: 0
Please help?
Vinkie

What kind of gateway are you using to connect to your PBX and how? What is your media set to? G.711 μ-law or a-law? I'd check media settings there as a starting point.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".

[svn] 3526: The call to the TestNG task in the configuration test framework had haltOnFailure set to true which is not what we want .

Revision: 3526
Author: [email protected]
Date: 2008-10-08 14:21:40 -0700 (Wed, 08 Oct 2008)
Log Message:
The call to the TestNG task in the configuration test framework had haltOnFailure set to true which is not what we want. Failures will get logged to the database at which point we can review them.
Also fix a failing test.
Modified Paths:
blazeds/trunk/qa/apps/qa-regress/testsuites/config/build.xml
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/messagingService/jms/NoJNDINameT est/error.txt
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/messagingService/jms/NoJNDINameT est/services-config.xml

I have a standard Ant build script for signing a jar file. I import it into my master Ant build files with
<import file="Sign.xml"/>
and then in my master Ant script I setup the name of the jar file e.g.
<property name="jar-file" value="${fun}/FunApplet.jar"/>
and then invoke a target
<target name="sign-jar" depends="jar, sign">
</target>
Since this target (sign-jar) depends on target 'jar' and target 'sign' it executes the 'jar' target and then the 'sign' target that is contained in Sign.xml.

The Response Group application was unable to transfer the call to the configured destination and no fallback exists

Hey,
I get this error message when calling into an unassigned number which redirects to a response group:
From user URI:
sip:[email protected];gruu;opaque=srvr:Microsoft.Rtc.Applications.Acd:RS6nRGV9DlmpNsLtmz5qeQAA
To user URI:
0220198611;phone-context=DefaultProfile
From user agent:
RTCC/4.0.0.0 Response_Group_Service Announcement_Service
Diagnostic header:
26005; reason="The Response Group application was unable to transfer the call to the configured destination and no fallback exists."
Interestingly "To user URI: 0220198611;phone-context=DefaultProfile" is the number off the caller not the destination. I wonder is this a bug? So is the response group trying to transfer to this number and failing because of course it doesnt exist?
As you can see the below the number I am calling is not 0220198611:
From phone number: 0220198611;phone-context=DefaultProfile
To phone number: +6493760053 From mediation server: onzlyncfe1.domain.co.nz To mediation server: From gateway: 192.168.100.70
To gateway:
Disconnected by: +6493760053
Does the calling party's number have to be normalised? If so how can I do this because the global normailisation rules dont seem to apply
in this situation. These rules do work when when calling into a users DDI.
Also to be clear....
+6493760053 is an unassigned number which is setup to redirect to a response group.
If I assign +6493760053 to a user then it works.
Additionally this works perfectly when the gateway sends the call to our legacy 2007r2 mediation server then on to Lync. If the gateway sends the call directly to the co-located Lync mediation server I get the error described.
I hope I make sense. If you are confused let me know :)
Help is appreciated.
Thanks,
Andrew

Hi ANdrew
Kindly advise how you transfered the unassigned numbers to a specific user, i used the below command but it failled, the message displayed but the call never routed:
New-CsAnnouncement -Parent service:ApplicationServer:LyncFE.squareone.local -Name "SQ unassigned number announcement" -TextToSpeechPrompt "You entered an invalid extinsion you will be forwarded to the operator" -Language "en-US" -TargetUri "sip:[email protected];user=phone"
While [email protected] is the sip uri in my lync for the operator
could you advise what is my issue?

I can only make the call on the third try, I can not hear the ringer

I can only make the call on the third try, I can not hear the ringer

Hi stig68,
If you are having grouping issues with compilation albums in iTunes, you may find the following article helpful:
Apple Support: Why aren't songs with the same album art grouped together?
http://support.apple.com/kb/TS1468
Regards,
- Brenden

CVP call server logs - Hi All, I am trying to figure out whether caller party(End User) hangup the call first or UCCE Agent

CVP call server logs
Hi All,
I am trying to figure out whether caller party(End User) hangup the call first or UCCE Agent.
Attaching CVP call server Logs& UCCE TCD& Route Call Details for your reference.

From the CVP logs, it can be determined which side disconnected the call first. For each call, CVP keeps track each call leg. From Inbound Gateway to CVP is INBOUND leg, rest are OUTBOUND leg. You can then look at which leg the SIP BYE message is received first.
Since you have very basic log enabled, you will not see the exact SIP message. But it can be determined by the outcome of the message. Here is the snippet of the log during the disconnect:
Line 3766: 3083689: 10.180.245.43: Sep 12 2014 12:21:11.293 -0700: %CVP_8_5_SIP-7-CALL: {Thrd=DIALOG_CALLBACK.6} CALLGUID = CBCCDD8539E811E4A3E2CCEF48565980 LEGID = CC65CE04-39E811E4-87DFD7D1-64B198F2 - [INBOUND] DURATION (msecs) = 25610 - DIALOG TERMINATED. Reason: Q.850;cause=16
Line 3768: 3083690: 10.180.245.43: Sep 12 2014 12:21:11.293 -0700: %CVP_8_5_SIP-7-CALL: {Thrd=DIALOG_CALLBACK.6} Sending BUS MSG:>>HEADERS: (JMSType)=MsgBus:CALL_STATE_EVENT (JMSDestination)=Topic(CVP.SIP.CC.EVENT) (JMSTimestamp)=1410549671293 >>BODY: callguid=CBCCDD8539E811E4A3E2CCEF48565980 RouterCallKey=6472 RouterCallKeySent=true causecode=1 timezone=America/Los_Angeles RouterCallKeySequenceNumber=0 version=CVP_8_5 labeltype=1 RouterCallKeyDay=151099 calldate=Fri Sep 12 12:21:11 PDT 2014 label=190376 localOffset=-420 eventid=6 calllegid=CC65CE04-39E811E4-87DFD7D1-64B198F2 >>STATE: isTabular=false isWriteable=true cursor=-1
The first Termination message came on the INBOUND leg which is the PSTN. That means, PSTN side disconnected the call first.
Hope this helps.
Abu

Need help in modifying the Calls by the Telemarketing agent

Similar Messages

Maybe you are looking for