Need help in Payroll Tax Balance Issue - Urgent

Hi,
Please help me with the following Tax and Balance issue. The system is on 12.0.3, South African Legislation.
Issue : Salary has been restructured from Basic Salary to Total package structure in Dec 2008. Retro Pay was used to pay the difference amounts in Dec Run. But while configuring the new Elements for this Total Package they have missed out adding the Retro Elements to Proper Tax calculating Balances.
Eg : "TP Salary" element is fed to "Taxable Income RFI" balance but "TP Retro Salary" element is not fed to this balance.
So tax has not been calculated for those Retro amounts. This has been identified while validating test run for IRP5 tax certificates.
The Feb 09 (Feb is the Tax year End for payroll) Payroll was already run on 10th and payments were already done. Now we need to tax the retro amounts and retrieve the balance tax amounts from Employees.
I added the proper tax balances to those Retro elements and and the balances were adjusted to add the Retro amounts. Then I ran the Feb run the payroll again as of 20th, it did not recalculate the tax.
How to recalculate the tax so that correct tax reflects in the Tax certificates? Please help me with the necessary Info.
Thanks,
Sri.

Hi,
As I mentioned earlier, I added the appropriate balances which are used to calculate Tax to Retro Elements and those Balances got updated with the delta amount but Tax was not updated. I want to know is there any process provided by Oracle using which Tax for those already paid amounts can be recalculated.
I calculated the Tax manually and using Adjust Balance form added ZA_TAX_BALANCE_ADJUSTMENT Element and given the difference tax amount in PAYE and Tax Input values and saved the form. The Tax got updated.
Tax_ASG_RUN - 15000
Tax_ASG_TAX_YTD - 153257.32 (Prev - 138257.32). When I run the IRP5 (Tax Certificate Process) the tax is also getting correctly on it.
But client wants Oracle to calculate the Tax for those retro amounts so thats the challenge.
Could you help me with this.
Thanks,
Sri

Similar Messages

  • Need help with ACE Load Balancing Base on URL pattern

    This is the first time for me trying to configure something like this on the ACE load balancer.  I need help configuring a load balancing policy base on URL pattern.  URL https://ineedhelp.com base on /willuhelpme and /imlost
    Key: ineedhelp_key
    cert:  ineedhelp_cert
    serverfarmA
    serverA 10.1.1.1 443
    serverfarmB
    serverB 10.1.1.2 443
    ineedhelp.com/willuhelpme-------serverfarmA
    ineedhelp.ocm/imlost---------------serverfarmB

    This is the first time for me trying to configure something like this on the ACE load balancer.  I need help configuring a load balancing policy base on URL pattern.  URL https://ineedhelp.com base on /willuhelpme and /imlost
    Key: ineedhelp_key
    cert:  ineedhelp_cert
    serverfarmA
    serverA 10.1.1.1 443
    serverfarmB
    serverB 10.1.1.2 443
    ineedhelp.com/willuhelpme-------serverfarmA
    ineedhelp.ocm/imlost---------------serverfarmB

  • Need help, MMC tree got deleted, very urgent.

    Hi,
    My sap MMC tree, got deleted in the server. I have been trying to restore since 2 days and couldnt succeed, please help me.
    1) i have uncared the sapmmc.sar from   Kernal\NT\I386\MMC\sapmmc.sar file
    2) i got about 7 files, in which there is one sapmmc file i have tried to double click it, n check but no go.
    3) i also tried to run the Sapstartsrv.exe file and fill in up the values in pop up window. & filled up the following values :-
                        SID: DEV
                        NR: 00
                        StartProfile:  (entire start profile path given)
                        user: devadm
                        passwd; (given)
    - but it says "the account name is invalid or does not exist or the password is invalid for account name specified"/
    - no go in both the cases.
    Please need help very urgent.
    Regards,
    Satish.

    siva,
    I am getting same error since 2 days
    SID: DEV
    NR: 00
    Start Profile: (entire start profile path)
    User: <hostname>/devadm
    passwd: ****
    Error:
    cannot install service
    create service failed:421
    The account name is invalid or doesnot exist, or the passwd is invalid for the account name specified.
    Edited by: satish c on Jun 4, 2008 11:12 AM

  • Need help on diagnosis of Graphics Issue

    Hello,
    I need help to determine if I am experiencing a graphics card issue and what my options are if there are any experts out there I would appreciate some feedback.
    *My system info:*
    Model Name: Mac Pro
    Model Identifier: MacPro2,1
    Processor Name: Quad-Core Intel Xeon
    Processor Speed: 3 GHz
    Number Of Processors: 2
    Total Number Of Cores: 8
    L2 Cache (per processor): 8 MB
    Memory: 4 GB
    Bus Speed: 1.33 GHz
    Chipset Model: NVIDIA GeForce 8800 GT
    Type: Display
    Bus: PCIe
    Slot: Slot-1
    PCIe Lane Width: x16
    VRAM (Total): 512 MB
    Vendor: NVIDIA (0x10de)
    Device ID: 0x0602
    Revision ID: 0x00a2
    ROM Revision: 3233
    *Description of Issue:* When playing 3D video games (i.e. Mass Effect 2 or Dragon Age) everything visually is fine for about 20 seconds and then I start to see pixelization (snow), texture anomalies and system freezes where mouse stops moving. It gives time slices occasionally so sometimes I can Alt + tab out of game and close it. Or the entire system just crashes. I think what is going on is some loop that is pegging either the CPU(s) or GPU.
    Everything was working fine up until last night. I had been playing the games without issue. I am playing these games on Windows XP and Vista using Boot Camp.
    This initially occurred on Windows XP playing Mass Effect 2.
    These are the steps I took which essentially tell me it is not a software issue:
    - Tested on another game Dragon Age (same result)
    - Updated to latest Nvidia drivers (same result)
    - Tested on separate Boot Camp Windows Vista with Dragon Age game (same result)
    These results lead me to believe I may have a broken graphics card? But I want to be certain before I go out and purchase a new one.
    *My Questions:*
    - Is there some software to verify if my graphics card is shotty?
    - Is re-seating the graphics card or memory worth trying?
    - Cleaning the dust out of my machine?
    - If I need a new graphics card, what are my options? Do I have to purchase it via Apple store? I would like to stick with an Nvidia card so am I stuck buying the same card I currently have or can I upgrade?
    If anyone can help me I would greatly appreciate it.
    Thank you,
    Leapstepman

    Is there some software to verify if my graphics card is shotty?
    Techtool Pro has some testing, the AHT tests VRAM, but game benchmarks and stressing will tell you the most.
    Is re-seating the graphics card or memory worth trying?
    Absolutely. Just don't reinstall the graphics card until you clean it thoroughly.
    Cleaning the dust out of my machine?
    YES. A dust filled graphics card heatsink will cause the GPU to cook, and cause problems thet you describe.
    If I need a new graphics card, what are my options? Do I have to purchase it via Apple store? I would like to stick with an Nvidia card so am I stuck buying the same card I currently have or can I upgrade?
    You don't have to buy from Apple, but using with OS X limits your choices to Mac compatible or flashable PC versions.
    There is an awful lot of user input into this topic here:
    http://blog.macsales.com/602-testing-those-new-graphics-cards
    Card reviews can also help:
    http://www.anandtech.com/video/showdoc.aspx?i=3140&p=9
    http://www.tomshardware.com/reviews/radeon-hd-4870,1964.html

  • Need Help on Payroll PCR

    Dear Experts
    I need help for writing a PCR for payroll.
    I have stored A calculation amount in Temp1 and B calculation amount in Temp2. Now I need to find out which Temp amount having lesser amount.
    Once I found lesser amount then I need to add another temp amount for total amount.
    Can any one give me the syntax to achieve this task.

    You could try a 2 step approach.
    In a first PCR, you transfer the amount values of the 2 WTs you want to compare into temporary variables:
    ESG *     WT     ****
               D  WGTYP?
            ADDWT *
    X123      ADDWT *   ADDWT&X123
    Y123      ADDWT *   ADDWT&Y123
    In a second PCR, you process the WT you want to add the difference to
    ESG *     WT     ****
               D  WGTYP?
            ADDWT *
    Z123      AMT=& X123  AMT?& Y123
    and if the return value is < (meaning Y123 is greater than X123), you could use the following sequence
    ZERO= A  AMT=& Y123 AMT-& X123 ADDWT& DIFF  ZERO= A  FILLF A  AMT+& DIFF  ADDWT *
    to add the difference between WTs X123 and Y123 to WT Z123.

  • Need help restoring data after security wipe - Urgent!

    Hello,
    I am in need of urgent help.
    I had saved some really important information in the memos of my blackberry curve 8520. After that I changed my phone to a non-blackberry phone. but I still had the old phone but it was kept off most of the time. I had backups from June 13, 2013. very recently I wiped the phone. (Very big mistake) Now I am in need of that information that I had saved in the memos. Now when I visit the blackberry protect website through my laptop it shows that the back up is there with 15 memos and many other things. but when I open the app of blackberry protect on my phone it shows that there are no previous versions of backup available to restore. 
    Now please tell me and help with this. I badly need the information that I have stored in the memos of this earlier back up version.
    Another thing I have noticed is that there is a problem in the link between BB Protect website and the BB Protect app on my phone. For example, if I click on "Play Sound" or "Display a message" on the BB Protect website, it tries to communicate with the device and then waits for the device to respond and then it fails to do the function clicked.

    Hello,
    Please check very very very very (did I say that enough?) carefully that you are using the exact same BBID credentials on your new BB that you are logging into via PC.
    If they are not the same, then that explains why it cannot present you with those backups on the device...they are associated to a different BBID than you are using on your BB now. To change your BB over to the BBID that contains the backups you require, you must WIPE the BB:
    KB26694 How to change the BlackBerry ID on a BlackBerry PlayBook tablet or BlackBerry smartphone
    However, be very careful when you then associate the BB to that other BBID...done incorrectly, you can lose your prior backups...refer:
    KB31489 BlackBerry Protect for BlackBerry smartphones does not display any backup files to restore
    Then again, if you are using the exact same BBID on both the device as well as via PC/browser, then the method discussed in KB31489 may already have been done incorrectly, wiping out those prior backups (and there is no way to retrieve them).
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Need help brainstorming a tricky IMAGE issue

    Hi,
    I've been trying to figure out a simple way around an issue, but as i simply cannot come up with an answer, i thought I'd put it out to the community to see if i can get some ideas back.
    I'm putting a Mobile game together, and I'm still establishing the foundations of it. One element is the idea of having all creatures and character to be able to look different. To this end, my proposal is to have a set of various frames of say different creatures, and with other items (like armour and weapons) in matching poses. For example, You would have say a person running in 4 frames. For each frame, there is a matching set of clothes frames for each pose. One coule be normal clothes, and another armour so when the character is wearing normal clothes, the system would draw to the screen the naked character and then place the clothes over the top. Proper transparency (using the PNG alpha channel) makes this masking effect work as it should and it seems to work okay here.
    Here is the problem. What i want to do is to be able to represent say, a hiding creature as being partially transparent wether through alpha blending or dithering. I have put an efficient class together than can quickly resize and recolour any image and draw it to the screen, and can also modify the transparency via either alpha blending or dithering. Here is the issue: This will NOT work when building the characters onto the screen! the problem if no-one notices here is lets say you then make the system draw the person at 50% opacity to the screen.Great, it works, but now we need to put the clothers on top so we draw THAT at 50% transparency. Uh-oh... Because the clothers are transparent, we get an artifact of the naked character shining through the clothers we just placed on top. So, the solution WOULD be simple: create an offscreen image for buffering, draw the character to it, then draw the results to the screen at 50% opacity... WRONG. The only Mutable off-screen image you can make is one filled with white pixels! Useless: we get an ugly white box around the character.
    The only two solutions i can think of are the following:
    1) Take a snapshot of the box around where we intend to draw the character. This should capture the background. We now build the character onto the screen as we normally would but if we want to make them transparent, we then paste the original background image over the top at a sertain opacity. I see problems with this being a) The design on the game is already very lean on memory requirements. I have built my own image handling classes that only load stuff when needed and discards it when no longer needed and also block wasteful reloading of images into memory, but having to always take a snapshot of a box around a character prior to drawing will slow it all down immensly.
    2) the class i use for transformations, recolouring and resizing does so by copying the image data into an array and then manipulating it. I've designed it very well so that it only ever holds one image at a time and loading a new image into it uses the same array and thus, never creates a new array in memory and then relying on the Garbage collector to reclaim it. Using this, i could render the characters to it, and then draw it to screen but the problem as i see it is that this would be very processor intensive and would most likely slow the entire system down.
    Naturally, the ideal solution is to draw to an offscreen image buffer and go from there, but i think the only way to do that is to use the BufferedImage which is on an API that isn't widely available (at least, it's not on my phone and it is pretty new). I need this to be as compatible as possible, so i don't want to access any optional API's i don't need to. I would prefer to be able to do this transparency trick, but if i can't, i guess i would have to find another way to represent a hiding character in the game (I guess a Black silouette).
    Any help, hints or ideas would be greatly appreciated!

    Okay, imagine you have a character running. The whole purpose of my design idea is to have it so the characters look different based on the gear they are equipped with (+Image a common game like Neverwinter nights, or WoW. Your character looks different based on what they are equipped with and no, I am not trying to create a game of that scale on a Mobile phone+). Naturally, the character isn't a static figure, so they move, run, attack and so fourth. My plan is to have a set of character frames in all the different frames, and matching clothes and equipment frames matching each cell (+we KNOW where their arm will be in the 2nd frame of a run-right action, so we would position say, a shield in the right spot. A clever appraoch is to be taken here for example, a right handed person would weild their shield in their left hand, and if they are running right, the shield would appear behind them and would be facing out, so the system would draw it in the order of "Left_Hand_Item->Character_in_the_Nude->Clothes_for_the_Character->Right_Hand_Item". Simple mirroring can handle any left/right directions as the frames for running in the different directions are also mirrored+). Essentially, the look of the character would need to be built on a per-frame basis. I am hessitant to build all of the frames of the character in memory at load time as I have the following action factors:
    - The character can face in 8 directions being all the diagonals, Vertical and horizontal directions.
    - The character needs the following actions to be available: Running, Standing, Dying -> On the ground (+This also counts falling down or sleeping+), Attacking / Swinging, Ranged attacks (+bow and arrow+).
    - To at least offer some kind or animateable look, there should be at least 2 frames for each action.
    As you can see, there is quite a lot. The approach i have already taken is fairly powerful. I decided to scrap the Java Sprites as it couldn't do what i needed it to do so i created my own caching system. A special MAP file stores the information on all the frames, and another class retrieves this on demand from the file, but only takes certain chunks. A initial class manages file access and loads the entire image into memory, and another uses this class to extract the frame it wants. When the other class is finished, the file-opening class then drops the full file from memory and attempts to reclaim the used memory. So far, it works well. The reason i have taken this appraoch is there is just too much data to have it all laoded into memory, it has to be done on demand and store as little information as possible. If i can represent 5 different characters by using a combination of other frames, i should have excellent results. I am trying to find a good balance between memory consumption and CPU usage. So, in a long winded answer:
    --There are a LOT of frames that may need to be transparent at any one time.
    --The amount of memory I'll need is still in the air at this point. As i build it, I am keeping a hawk-like eye on memory consumption and watching for anything being wasted (+using boolean where possible, If i don't need the capacity of an int, i use byte instead, etc+). This incidently ran me into the strong desire to utilize unsigned values as i don't need negatives anywhere, but I will have to live with that wasted bit.
    --I am aware that not all devices support Alpha blending which is why I also aim to support dithering. For example at 50% transparency, more than half the pixels are fully transparent (+Some may already be transparent, so we're not going to go and make them visible!)+
    --The transparent character is used to represent a character that is hiding. For example, you may have an Ally character being stealthy, so to make sure YOU the player can still see them, but represent clearly that they are in a special state, i wanted them to be transparent. Also, if there is an enemy stealthing, but you have detected them. I need to be able to represent that they have indeed been detected and that they can be seen, but they are still trying to be stealthy. So yes, one substitute would be to make them entirely black pixels and maybe even just draw the naked character black without any armour or equipment as a stealthing character would assume reduced detail.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • Need Help regarding payroll ASAP

    Hi Friends..
    i m new to hr-abap and i have installed IDES in my system. i want to know Can we work out on payroll and Time management programs with IDES data for practice or anything extra need to configure?? Please guide me as i need to start practice. Thanks alot.
    Sudha

    Hi Sudha,
    Which version is that...if you are using 4.7...then while doing payroll Practice with International...some times 4.7 will not work for INDIA...other wise you can use IDES...No issues..
    Hope this helps you...
    Reward if it is valuable...
    Cheers..
    Raghu Kumar R

  • Windows 2012 Nodes - Slow CSV Performance - Need help to resolve my iSCSI issue configuration

    I spent weeks going over the forums and the net for any publications and advice on how to optimize iSCSI connections and i'm about to give up.  I really need some help in determining if its something i'm not configuring right or maybe its an equipment
    issue. 
    Hardware:
    2x Windows 2012 Hosts with 10 Nics (same NIC configuration) in a Failover Cluster sharing a CSV LUN. 
    3x NICs Teamed for Host/Live Migration (192.168.0.x)
    2x NICS teamed for Hyper-V Switch 1 (192.168.0.x)
    1x NIC teamed for Hyper-V Switch 2 (192.168.10.x)
    4x NICs for iSCSI traffic (192.168.0.x, 192.168.10.x, 192.168.20.x 192.168.30.x)
    Jumbo frames and flow control turned on all the NICs on the host.  IpV6 disabled.  Client for Microsoft Network, File/Printing Sharing Disabled on iSCSI NICs. 
    MPIO Least Queue selected.  Round Robin gives me an error message saying "The parameter is incorrect.  The round robin policy attempts to evenly distribute incoming requests to all processing paths. "
    Netgear ReadyNas 3200
    4x NICs for iSCSI traffic ((192.168.0.x, 192.168.10.x, 192.168.20.x 192.168.30.x)
    Network Hardware:
    Cisco 2960S managed switch - Flow control on, Spanning Tree on, Jumbo Frames at 9k - this is for the .0 subnet
    Netgear unmanaged switch - Flow control on, Jumbo Frames at 9k - this is for .10 subnet
    Netgear unmanaged switch - Flow control on, Jumbo Frames at 9k - this is for .20 subnet
    Netgear unmanaged switch - Flow control on, Jumbo Frames at 9k - this is for .30 subnet
    Host Configuration (things I tried turning on and off):
    Autotuning 
    RSS
    Chimney Offload
    I have 8 VMs stored in the CSV.  When try to load all 8 up at the same time, they bog down.  Each VM loads very slowly and when they eventually come up, most of the important services did not start.  I have to load
    them up 1 or 2 at a time.  Even then the performance is nothing like if they were loading up on the Host itself (VHD stored on the host's hdd).  This is what prompted me to add in more iSCSI connections to see if I can improve the VM's
    performance.  Even with 4 iSCSI connections, I feel nothing has changed.  The VMs still start up slowly and services do not load right.  If I distribute the load with 4 VMs on Host 1 and 4 VMs on Host 2, the load up
    times do not change. 
    As a manual test for file copy speed, I moved the cluster resources to Host 1 and copied a VM from the CSV and onto the Host.   The speed would start out around 250megs/sec and then eventually drop down to about 50/60 megs/sec.  If I turn
    off all iSCSI connections except one, it get the same speed.  I can verify from the Windows Performance Tab under Task Manager that all the NICS are distributing traffic evenly, but something is just limiting the flow.  Like what I stated on top,
    I played around with autotuning, RSS and chimney offload and none of it makes a difference. 
    The VMs have been converted to VHDx and to fixed size.  That did not help.   
    Is there something I'm not doing right?   I am working with Netgear support and they are puzzled as well.  The ReadyNas device should easily be able to handle it. 
    Please help!  I pulled my hair out over this for the past two months and I'm about to give up and just ditch clustering all together and just run the VMs off the hosts themselves. 
    George

    A few things...
    For starters, I recommend opening a case with Microsoft support.  They will be able to dig in and help you...
    Turn on the CSV Cache, it will boost your performance 
    http://blogs.msdn.com/b/clustering/archive/2012/03/22/10286676.aspx
    A file copy has no resemblance of the unbuffered I/O a VM does... so don't use that as a comparison, as you are comparing apples to oranges.
    Do you see any I/O performance difference between the coordinator node and the non-coordinator nodes?  Basically, see which node owns the cluster Physical Disk resource... measure the performance.  Then move the Physical Disk resource for the
    CSV volume to another node, and repeat the same measure of performance... then compare them.
    Your IP addressing seems odd...  you show multiple networks on 192.168.0.x and also on 192.168.10.x.   Remember that clustering only recognizes and uses 1 logical interface per IP subnet.  I would triple check all your IP schemes...
    to ensure they are all different logical networks.
    Check you binding order
    Make sure you NIC drivers and NIC firmware are updated
    Make sure you don't have IPsec enabled, that will significantly impact your network performance
    For the iSCSI Software Initiator, when you did your connection... make sure you didn't do a 'Quick Connect'... that will do a wildcard and connect over any network.  You want to specify your dedicated iSCSI network
    No idea what the performance capabilities of the ReadyNas is...  this could all likely be associated with the shared storage.
    What speed NIC's are you using?   I hope at least 10 GB...
    Hope that helps...
    Elden
    Hi Elden,
    2. CSV is turned on, I have 4GB dedicated from each host to it.  With IOmeter running within the VMs, I do see the read speed jumped up 4-5x fold but the write speed stays the same (which according to the doc it should).  But even with the read
    speed that high, the VMs are not starting up quickly.  
    4. I do not see any difference with IO with coordinator and non coordinator nodes.  
    5.  I'm not 100% sure what your saying about my IPs.  Maybe if I list it out, you can help explain further.  
    Host 1 - 192.168.0.241 (Host/LM IP), Undefined IP on the 192.168.0.x network (Hyper-V Port 1), Undefined IP on the 192.168.10.x network (Hyper- V port 2), 192.168.0.220 (iSCSI 1), 192.168.10.10 (iSCSI2), 192.168.20.10(iSCSI 3), 192.168.30.10 (iSCSI 4)
    The Hyper-V ports are undefined because the VMs themselves have static ips.  
    0.220 host NIC connects with the .231 NIC of the NAS
    10.10 host NIC connects with the 10.100 NIC of the NAS
    20.10 host NIC connects with the 20.100 NIC of the NAS
    30.10 host NIC connects with the 30.100 NIC of the NAS
    Host 2 - 192.168.0.245 (Host/LM IP), Undefined IP on the 192.168.0.x network (Hyper-V Port 1), Undefined IP on the 192.168.10.x network (Hyper- V port 2), 192.168.0.221 (iSCSI 1), 192.168.10.20 (iSCSI2), 192.168.20.20(iSCSI 3), 192.168.30.20 (iSCSI 4)
    The Hyper-V ports are undefined because the VMs themselves have static ips.  
    0.221 host NIC connects with the .231 NIC of the NAS
    10.20 host NIC connects with the 10.100 NIC of the NAS
    20.20 host NIC connects with the 20.100 NIC of the NAS
    30.20 host NIC connects with the 30.100 NIC of the NAS
    6. Binding orders are all correct.
    7. Nic drivers are all updated.  Didn't check the firmware.
    8. I do not know about IPSec...let me look into it.  
    9. I did not do quick connect, each iscsi connection is defined using a specific source ip and specific target ip.  
    These are all 1gigabit nics, which is the reason why I have so many NICs...otherwise there would be no reason for me to have 4 iscsi connections.  

  • Need HELP to burn 35 DVDs very URGENT !!!

    I have created a 16/9 screen DVD, size 451 Mo.
    Problem 1:
    When I register it as Disk image, I cannot open it on my HD to preview before burn it. When I click on the icon, it says "specify application", so I put iDVD, but it doesn't open. So I burn my project directly from iDVD. It takes time. I need to burn 35!!! Is there is possibility to fixe it, or I have to encoder every time I have to burn the same DVD?
    Problem 2:
    When I burn my project to DVD-R x16 Verbatim, using "Optimal quality" or "Optimal performances", my quality image is suffering. Pixels are becoming too big (like 1mmx1mm mosaique), so it is difficult to read text and to see pictures. My original project is perfect. I thought I was DVD quality, because I was using DVD+R x16 verbatim. But it seems to be iDVD problem.
    Thank to all who know anything about and can help. I have to deliver the project by the end of this week.

    Problem 1 Follow these directions:
    Suggest you create a disc image and then burn the DVD. File/Save As Disc Image...
    http://docs.info.apple.com/article.html?artnum=164927
    This will isolate any encoding/burning issues you may encounter. Once the disc image is created, double-click the .img and burn the virtual disc that should appear on your desktop, using Toast to burn the DVD. Disk Utility to burn the .img file. Usually, you can select a burning speed in Disk Utility.
    There are variations to this process based on which OS X you are using...
    Open Disk Utility (in Utilities folder in Applications folder), click on the virtual disc (maybe the .img) in the left-hand window. Click the Burn icon. A new window should drop down and your SuperDrive tray will open after clicking the Burn icon. Insert a recordable DVD. (Verbatim DVD-R preferred by me.) Click the Close button. Wait. Select a burn speed. Then click the Burn button.
    -->If the virtual disk selection won't allow you to click the Burn icon, use the .img file instead. This may have changed in 10.3.9 and did change in Tiger.
    Also, you can use DVD Player to play the virtual disk to check your iDVD project before burning to DVD. Launch DVD Player. File/Open VIDEO_TS (Open DVD Media... in Player 4.6). Find the VIDEO_TS folder and open that. (The audio folder is for DVD-Audio disks.)
    http://docs.info.apple.com/article.html?artnum=93006
    Problem 2 Burn the disk image with Disk Utility and select a speed 4X or slower from the speed pop-up.
    G4 DP 1.25 GHz 2GB RAM 4 Drives 770GB   Mac OS X (10.4.6)   2 SuperDrives (SL 8X & DL 16X)

  • Need help Regarding Payroll and OM

    Hi All,
    Can any one of you provide me a configuration documents regarding Payroll and OM ..I need it very badly.Can any of you help me out in this.You can mail to my id
    [email protected].
    Thanks in advance,
    Sandeep

    hi friends
    can u anybody have Payroll(PCR) DOC , please help me andn  send to my mail ID. [email protected]
    Thanks in advance
    Regards,
    Ramesh.n

  • Need help for deadline with timing issues

    Hello everyone,
    (I'm still using the '08 versions of iLife)
    I have to meet a deadline within a week, and am having a problem with timing. I have a group f 32 slides, which I want to sync with an existing narrative soundtrack. I've attempted this in Keynote, GarageBand, and iMovie, with identical results...
    When I preview the presentation in any of those apps, it all looks fine. But when I save it as a movie, and play it, the images do not change at the times I had set for them. In QuickTime, if I hit "pause", and then "play", the image jumps to the correct one, but during normal playback, it seems to "hang" on certain images, while the soundtrack continues to play smoothly. I've got to meet my deadline with this project. Can anyone help?
    Thanks in advance.

    Hi Namrata,
    Requirement is very clear, you need to handle it in different PCR's need to be called in single PCR.
    ex. ZSS1 in call ZSS2 and ZSS3.
    Create a Constant in T511k and maintain dates of your payroll periods.
    And then write as below:
    AMT=1
    * <then call new calculation PCR>
    < <then call Old calculation PCR>
    Thank you,
    Sreenvaas.

  • Need Help to Draw and Drag Triangle - URGENT

    Hi everyone - I am developing various proofs of the pythagora's theorem
    and the following code draws a triangle on screen and the proof follows -
    but i need to know how to drag the triangle such tht 1 angle is always set to 90 degrees.
    i.e. i need to resize the triangle by dragging its vertex points by which the1 angle remains at 90 no matter what the size.
    The proof has got some graphics code hardcoded in it - i.e. LINES AND POLYGONS have been hardcoded
    i need to reconfigure that such that everytime the user increases the size of the triagnle and clicks on next it draws the lines and polygons in the correct area and place
    PLEASE HELP
    the code is as follows
    MAIN CLASS
    import java.awt.BorderLayout;
    import java.awt.Container;
    import java.awt.*;
    import java.awt.event.*;
    import java.text.*;
    import javax.swing.*;
    public class TestProof {
        TestControl control;          // the controls for the visual proof
        TestView view;          // the drawing area to display proof
        // called upon class creation
        public TestProof() {
            view = new TestView();
    view.setBackground(Color.WHITE);
            control = new TestControl(view);
            Frame f = new Frame("Pythagoras");
            f.add(view,"Center");
            f.add(control,"South");
            f.setSize(600,600);
            f.setBackground(Color.lightGray);
            f.addMouseMotionListener(
            new MouseMotionListener() { //anonymous inner class
                //handle mouse drag event
                public void mouseMoved(MouseEvent e) {
                    System.out.println("Mouse  " + e.getX() +","  + e.getY());
                public void mouseDragged(MouseEvent e) {
                    System.out.println("Draggg: x=" + e.getX() + "; y=" + e.getY());
            JMenu File = new JMenu("File");
            JMenuItem Exit = new JMenuItem("Exit");
            Exit.addActionListener(new java.awt.event.ActionListener() {
                public void actionPerformed(java.awt.event.ActionEvent evt) {
                    ExitActionPerformed(evt);
            JMenuBar menuBar = new JMenuBar();
            menuBar.add(File);
       File.add(Exit);
            f.add(menuBar,"North");
            f.show();
        private JMenuBar getMenuBar() {
            JMenu File = new JMenu("File");
            JMenuItem Exit = new JMenuItem("Exit");
            Exit.addActionListener(new java.awt.event.ActionListener() {
                public void actionPerformed(java.awt.event.ActionEvent evt) {
                    ExitActionPerformed(evt);
            JMenuBar menuBar = new JMenuBar();
            menuBar.add(File);
                 File.add(Exit);   
            return menuBar;
        private void ExitActionPerformed(java.awt.event.ActionEvent evt) {
            // TODO add your handling code here:
            System.exit(0);
        // for standalone use
        public static void main(String args[]) {
      TestProof TP = new TestProof();
    }Test VIEW
    import javax.swing.*;
    import java.awt.*;
    import java.awt.event.*;
    import java.awt.geom.*;
    import java.text.*;
    import javax.swing.JFrame;
    import javax.swing.JPanel;
    public class TestView extends Canvas {
        int TRANSLUCENT = 1;
        int sequence;          // sequencer that determines what should be drawn
        // notes matter
        int noteX = 100;     // note coordinates
        int noteY = 60;
        int fontSize = 11;     // font size
        int lineSpacing     // space between two consecutive lines
        = fontSize + 2;
        Font noteFaceFont;     // font used to display notes
        // objects matter
        Polygon tri;          // right-angled triangle with sides A, B, and C
        Polygon tri1;
        Polygon sqrA;          // square with side of length A
        Polygon sqrB;          // square with side of length B
        Polygon sqrC;          // square with side of length C
        Polygon parA;          // parallelogram of base A and height A
        Polygon parB;          // parallelogram of base B and height B
        Polygon poly1;
        Polygon poly2;
        Polygon poly3;
        Polygon poly4;
        Polygon poly5;
        Polygon poly6;
        int X0 = 350;          // coordinates of triangle
        int Y0 = 350;
        int A = 90;//60;          // triangle size
        int B = 120;//80;
        int C = 150;//100;
        //CORDS of 2nd triangle
        int X1 = 350;
        int Y1 = 500;
        // notes: three lines per note
        String notes[] = {
            // note 0
            // note 1
            // note 2
            // note 3
            // note 4
            // note 5
            // note 6
            // note 7
            // note 8
            // note 9
            // note 10
            // note 11
            // note 12
            // note 13
            // note 14
        // constructor
        public TestView() {
            addMouseMotionListener(
            new MouseMotionListener() { //anonymous inner class
                //handle mouse drag event
                public void mouseMoved(MouseEvent e) {
                    System.out.println("Mouse  " + e.getX() +","  + e.getY());
                public void mouseDragged(MouseEvent e) {
                    System.out.println("Draggg: x=" + e.getX() + "; y=" + e.getY());
            // set font
            noteFaceFont = new Font("TimesRoman", Font.PLAIN, fontSize);
            // (coordinates specified w.r.t. to P0, unless otherwise specified)
            // create the triangle
            tri = new Polygon();
            tri.addPoint(0, 0);                    // add P0 coordinate
            tri.addPoint(A*A/C, -A*B/C);          // add A3 coordinate
            tri.addPoint(C, 0);                    // add C1 coordinate
            tri.translate(X0, Y0);               // place triangle
            tri1 = new Polygon();
            tri1.addPoint(0,0);                    // add P0 coordinate
            tri1.addPoint(A*A/C +38, +A*B/C);          // add A3 coordinate
            tri1.addPoint(C, 0);                    // add C1 coordinate
            tri1.translate(X1, Y1);
            // create square of side A
            sqrA = new Polygon();
            sqrA.addPoint(0, 0);               // add P0 coordinate
            sqrA.addPoint(-A*B/C, -A*A/C);          // add A1 coordinate
            sqrA.addPoint(-A*(B-A)/C, -A*(A+B)/C);     // add A2 coordinate
            sqrA.addPoint(A*A/C, -A*B/C);          // add A3 coordinate
            sqrA.translate(X0, Y0);               // place square
            // create square of side B
            // warning: the coordinate of this object are specified relative to C1
            sqrB = new Polygon();
            sqrB.addPoint(0, 0);               // add C1 coordinate
            sqrB.addPoint(B*A/C, -B*B/C);          // add B1 coordinate
            sqrB.addPoint(B*(A-B)/C, -B*(A+B)/C);     // add B2 coordinate
            sqrB.addPoint(-B*B/C, -B*A/C);          // add A3 coordinate
            sqrB.translate(X0 + C, Y0);               // place square
            // create square of side C
            sqrC = new Polygon();
            sqrC.addPoint(0, 0);               // add P0 coordinate
            sqrC.addPoint(C, 0);               // add C1 coordinate
            sqrC.addPoint(C, C);               // add C2 coordinate
            sqrC.addPoint(0, C);               // add C3 coordinate
            sqrC.translate(X0, Y0);               // place square
            poly1 = new Polygon();
            poly1.addPoint(405,279);
            poly1.addPoint(413,350);
            poly1.addPoint(432,500);
            poly1.addPoint(442,571);
            poly1.addPoint(500,500);
            poly1.addPoint(500,350);
            poly2 = new Polygon();
            poly2.addPoint(279,297);
            poly2.addPoint(404,280);
            poly2.addPoint(571,254);
            poly2.addPoint(500,350);
            poly2.addPoint(350,350);
            //Polygon 3
            poly3 = new Polygon();
            poly3.addPoint(404,280);
            poly3.addPoint(350,350);
            poly3.addPoint(414,350);
            poly4 = new Polygon();
            poly4.addPoint(350,350);
            poly4.addPoint(350,500);
            poly4.addPoint(442,572);
            poly4.addPoint(433,500);
            poly4.addPoint(414,350);
            poly5 = new Polygon();
            poly5.addPoint(476,183);
            poly5.addPoint(332,225);
            poly5.addPoint(278,295);
            poly5.addPoint(404,279);
            poly5.addPoint(571,254);
            poly6= new Polygon();
            poly6.addPoint(405,278);
            poly6.addPoint(332,224);
            poly6.addPoint(476,182);
            // create parallelogram of height A
            parA = new Polygon();
            parA.addPoint(0, 0);               // add P0 coordinate
            parA.addPoint(0, C);               // add C3 coordinate
            parA.addPoint(A*A/C, C - A*B/C);          // add Q0 coordinate
            parA.addPoint(A*A/C, -A*B/C);          // add A3 coordinate
            parA.translate(X0,Y0);               // place parallelogram
            // create parallelogram of height B
            // warning: the coordinate of this object are specified from C1
            parB = new Polygon();
            parB.addPoint(0, 0);               // add C1 coordinate
            parB.addPoint(-B*B/C, -B*A/C);          // add A3 coordinate
            parB.addPoint(A*A/C - C, C - A*B/C);     // add Q0 coordinate
            parB.addPoint(0, C);               // add C2 coordinate
            parB.translate(X0 + C, Y0);
            // place parallelogram
        // depending on the sequence number we draw certain objects
        public void paint(Graphics gfx) {
            super.paint(gfx);
            Graphics2D g = (Graphics2D) gfx;
            g.setRenderingHint(RenderingHints.KEY_ANTIALIASING,
            RenderingHints.VALUE_ANTIALIAS_ON);
            // text first, then objects (and animation)
            // we always output some notes
            g.drawString(notes[3*sequence], noteX, noteY);
            g.drawString(notes[3*sequence + 1], noteX, noteY + lineSpacing);
            g.drawString(notes[3*sequence + 2], noteX, noteY + 2*lineSpacing);
            // the object are drawn in an order so that they are properly overlapped
            if(sequence == 13) {
                g.setColor(Color.green);
                g.fillPolygon(poly1);
                g.fillPolygon(poly2);
                g.fillPolygon(poly3);
                g.fillPolygon(poly4);
                g.fillPolygon(poly5);
                g.setColor(Color.RED);
                g.setColor(Color.GREEN);
                g.drawLine(413,351,433,499);
                g.setColor(Color.white);
                g.fillPolygon(tri);
                g.fillPolygon(tri1);
                g.fillPolygon(poly6);
            if(sequence == 12 ) {
                g.setColor(Color.green);
                g.fillPolygon(poly1);
                g.fillPolygon(poly2);
                g.fillPolygon(poly3);
                g.fillPolygon(poly4);
                g.fillPolygon(poly5);
                g.setColor(Color.BLACK);
            if(sequence == 11){
                g.setColor(Color.green);
                g.fillPolygon(poly1);
                g.fillPolygon(poly3);
                g.fillPolygon(poly4);
                g.setColor(Color.BLACK);
            if(sequence == 8 ){
                g.setColor(Color.green);
                g.fillPolygon(poly5);
                g.setColor(Color.MAGENTA);
                g.drawString("E",578,254);
                g.drawString("D",268,302);
                g.setColor(Color.black);
                g.drawArc(250,150,350,250,320,65);
            else if (sequence == 9 ){
                g.setColor(Color.green);
                g.fillPolygon(poly2);
                g.setColor(Color.MAGENTA);
                g.drawString("E",578,254);
                g.drawString("D",268,302);
                g.setColor(Color.black);
                g.drawArc(250,150,350,250,320,65);
            if( sequence == 10){
                g.setColor(Color.green);
                g.fillPolygon(poly2);
                g.fillPolygon(poly5);
                g.setColor(Color.black);
                g.setColor(Color.MAGENTA);
                g.drawString("E",578,254);
                g.drawString("D",268,302);
                g.setColor(Color.black);
                g.drawArc(250,150,350,250,320,65);
            if(sequence == 7){
                g.setColor(Color.green);
                g.fillPolygon(poly2);
                g.setColor(Color.MAGENTA);
                g.drawString("E",578,254);
                g.drawString("D",268,302);
                g.setColor(Color.black);
            if(sequence == 6){
                g.setColor(Color.yellow);
                g.fillPolygon(poly2);
                g.setColor(Color.green);
                g.fillPolygon(poly3);
                g.setColor(Color.blue);
                g.fillPolygon(poly4);
                g.setColor(Color.black);
                g.drawArc(250,175,350,275,300,65);
                //g.drawArc(250,150,350,250,320,65);
                g.drawLine( 606,309,599,299);
                g.drawLine(592,313, 599,299);
                g.drawString("+90 degrees",605,378);
            if (sequence == 5 ) {
                g.setColor(Color.yellow);
                g.fillPolygon(poly2);
                g.setColor(Color.black);
            if (sequence == 4) {
                g.setColor(Color.YELLOW);
                g.fillPolygon(poly1);
                g.setColor(Color.black);
                g.drawArc(319,310,250,195,89,-35);
                g.drawLine(499,319, 492,312);
                g.drawLine(499,319, 492,325);
                g.drawArc(200,180, 233,238,-120,-60);
                g.drawLine(200,298, 208,309);
                g.drawLine(200,298, 194,313);
                g.drawString("-90 degrees",227,347);
            if (sequence >= 3) {
                g.drawLine(404,279,442,572);
            // draw the squares
            if (sequence >= 2) {
                g.drawLine(278,296,572,254);
            // draw the squares
            if (sequence >= 1) {
                g.drawLine(333,224,476,182);
                g.drawPolygon(tri1);
            // always draw the triangle
            g.drawPolygon(tri);
            g.drawPolygon(sqrA);
            g.drawPolygon(sqrB);
            g.drawPolygon(sqrC);
            g.setColor(Color.MAGENTA);
            g.drawString("C", X0 + C/2 - fontSize/2, Y0 + lineSpacing);
            g.drawString("A",
            X0 + A*A/(2*C) - fontSize*A/B/2,
            Y0 - A*B/(2*C) - lineSpacing*A/B);
            g.drawString("B",
            X0 + C - B*B/(2*C) - fontSize*A/B/2,// the last "-" isn't log.
            Y0 - B*A/(2*C) - lineSpacing*A/B);
        public void redraw(int sequence) {
            this.sequence = sequence;
            repaint();
    }TEST CONTROL
    * TestControl.java
    * Created on 28 February 2005, 11:16
    import java.awt.*;
    import java.awt.event.*;
    import java.text.*;
    import javax.swing.JFrame;
    * @author  Kripa Bhojwani
    public class TestControl extends Panel implements ActionListener {
      TestView view;
      int sequence;                    // event sequence
      // constructor
      public TestControl(TestView view) {
        Button b = null;
        Label label = new Label("A^2 ");
        this.view = view;          // initialize drawble area
        sequence = 0;               // initialize sequence
        b = new Button("Prev");
        b.addActionListener(this);
        add(b);
        b = new Button("Next");
        b.addActionListener(this);
        add(b);
        add(label);
      // exported method
      public void actionPerformed(ActionEvent ev) {
        String label = ev.getActionCommand();
        if (label.equals("Prev")) {
          if (sequence >0) {
         --sequence;
        else {
          if (sequence < 15) {
         ++sequence;
        this.setEnabled(false);          // disable the controls
        view.redraw(sequence);
        this.setEnabled(true);          // enable the controls
    }Please help --- really need to sort this out...
    THANKS

    One of the problems you face is that it is hard to recognise which parts of your code are drawing the triangle. This is because you are writing code in a procedural way rather than an object oriented way.
    In object oriented code you would have a triangle object that could draw itself. You would create the triangle object by specifying its sizes and angles in some way. Then it should be easy to change the triangles sizes and angles and ask all the drawn objects to redraw themselves.

  • Need help in recovering portal admin password - URGENT

    Hi,
    I am unable to start the ALUI LDAP Service and couldn't login to the portal too. Below is the error that I am getting when trying to start the ALUI LDAP Service and I m looking for help to reset the administrator password.
    INFO | jvm 1 | 2013/01/16 20:33:11 | Initiating LDAP server start sequence...
    INFO | jvm 1 | 2013/01/16 20:33:11 | Starting server on port : 3389
    INFO | jvm 1 | 2013/01/16 20:33:11 | Initializing LDAP/X.500 BER protocol codec...
    INFO | jvm 1 | 2013/01/16 20:33:11 | Detected 98 active CPU cores.
    INFO | jvm 1 | 2013/01/16 20:33:11 | ApacheOpenLogFactory successfully loaded.
    INFO | jvm 1 | 2013/01/16 20:33:12 | ApacheOpenLogFactory successfully loaded.
    INFO | jvm 1 | 2013/01/16 20:33:12 | Could not start LDAP listener on port 3389:javax.naming.ConfigurationException: Unable to instantiate authtication provider Java class "com.bea.alui.directory.backend.auth.plumtree.PlumtreeAuthenticator". Please check your configuration and ensure that jvm has permission to instantiate this class.
    INFO | jvm 1 | 2013/01/16 20:33:12 | WrapperStartStopApp: start main method completed
    INFO | jvm 1 | 2013/01/16 20:33:12 | Wrapper Manager: ShutdownHook started
    INFO | jvm 1 | 2013/01/16 20:33:12 | WrapperManager.stop(0) called by thread: Wrapper-Shutdown-Hook
    INFO | jvm 1 | 2013/01/16 20:33:12 | Send a packet STOP : 0
    DEBUG | wrapperp | 2013/01/16 20:33:12 | read a packet STOP : 0
    DEBUG | wrapper | 2013/01/16 20:33:12 | JVM requested a shutdown. (0)
    DEBUG | wrapper | 2013/01/16 20:33:12 | wrapperStopProcess(0) called.
    DEBUG | wrapper | 2013/01/16 20:33:12 | Sending stop signal to JVM
    DEBUG | wrapperp | 2013/01/16 20:33:12 | send a packet STOP : NULL
    INFO | jvm 1 | 2013/01/16 20:33:12 | Received a packet STOP :
    INFO | jvm 1 | 2013/01/16 20:33:13 | Thread, Wrapper-Shutdown-Hook, handling the shutdown process.
    INFO | jvm 1 | 2013/01/16 20:33:13 | calling listener.stop()
    INFO | jvm 1 | 2013/01/16 20:33:13 | WrapperStartStopApp: stop(0)
    INFO | jvm 1 | 2013/01/16 20:33:13 | WrapperStartStopApp: invoking stop main method
    INFO | jvm 1 | 2013/01/16 20:33:13 | Initiating LDAP server stop sequence...
    DEBUG | wrapper | 2013/01/16 20:33:09 | JVM signalled a start pending with waitHint of 5000 millis.
    DEBUG | wrapperp | 2013/01/16 20:33:09 | read a packet STARTED :
    DEBUG | wrapper | 2013/01/16 20:33:09 | JVM signalled that it was started.
    DEBUG | wrapperp | 2013/01/16 20:33:10 | send a packet PING : ping
    INFO | jvm 1 | 2013/01/16 20:33:11 | Received a packet PING : ping
    INFO | jvm 1 | 2013/01/16 20:33:11 | Send a packet PING : ok
    DEBUG | wrapperp | 2013/01/16 20:33:11 | read a packet PING : ok
    DEBUG | wrapper | 2013/01/16 20:33:11 | Got ping response from JVM
    INFO | jvm 1 | 2013/01/16 20:33:11 | OpenLog: Registered application name: aluidirectory.osha-trn-wcims-01.alui (local machine only)
    INFO | jvm 1 | 2013/01/16 20:33:11 | Initiating LDAP server start sequence...
    INFO | jvm 1 | 2013/01/16 20:33:11 | Starting server on port : 3389
    INFO | jvm 1 | 2013/01/16 20:33:11 | Initializing LDAP/X.500 BER protocol codec...
    INFO | jvm 1 | 2013/01/16 20:33:11 | Detected 98 active CPU cores.
    INFO | jvm 1 | 2013/01/16 20:33:11 | ApacheOpenLogFactory successfully loaded.
    INFO | jvm 1 | 2013/01/16 20:33:12 | ApacheOpenLogFactory successfully loaded.
    INFO | jvm 1 | 2013/01/16 20:33:12 | Could not start LDAP listener on port 3389:javax.naming.ConfigurationException: Unable to instantiate authtication provider Java class "com.bea.alui.directory.backend.auth.plumtree.PlumtreeAuthenticator". Please check your configuration and ensure that jvm has permission to instantiate this class.
    INFO | jvm 1 | 2013/01/16 20:33:12 | WrapperStartStopApp: start main method completed
    INFO | jvm 1 | 2013/01/16 20:33:12 | Wrapper Manager: ShutdownHook started
    INFO | jvm 1 | 2013/01/16 20:33:12 | WrapperManager.stop(0) called by thread: Wrapper-Shutdown-Hook
    INFO | jvm 1 | 2013/01/16 20:33:12 | Send a packet STOP : 0
    DEBUG | wrapperp | 2013/01/16 20:33:12 | read a packet STOP : 0
    DEBUG | wrapper | 2013/01/16 20:33:12 | JVM requested a shutdown. (0)
    DEBUG | wrapper | 2013/01/16 20:33:12 | wrapperStopProcess(0) called.
    DEBUG | wrapper | 2013/01/16 20:33:12 | Sending stop signal to JVM
    DEBUG | wrapperp | 2013/01/16 20:33:12 | send a packet STOP : NULL
    INFO | jvm 1 | 2013/01/16 20:33:12 | Received a packet STOP :
    INFO | jvm 1 | 2013/01/16 20:33:13 | Thread, Wrapper-Shutdown-Hook, handling the shutdown process.
    INFO | jvm 1 | 2013/01/16 20:33:13 | calling listener.stop()
    INFO | jvm 1 | 2013/01/16 20:33:13 | WrapperStartStopApp: stop(0)
    INFO | jvm 1 | 2013/01/16 20:33:13 | WrapperStartStopApp: invoking stop main method
    INFO | jvm 1 | 2013/01/16 20:33:13 | Initiating LDAP server stop sequence...
    INFO | jvm 1 | 2013/01/16 20:33:13 | LDAP server stop sequence failed:java.net.ConnectException: Connection refused
    ERROR | wrapper | 2013/01/16 20:33:46 | Shutdown failed: Timed out waiting for signal from JVM.
    ERROR | wrapper | 2013/01/16 20:33:46 | JVM did not exit on request, terminated
    INFO | wrapper | 2013/01/16 20:33:47 | JVM exited on its own while waiting to kill the application.
    DEBUG | wrapper | 2013/01/16 20:33:47 | Signal trapped. Details:
    DEBUG | wrapper | 2013/01/16 20:33:47 | signal number=18 (SIGCHLD), source="unknown"
    DEBUG | wrapper | 2013/01/16 20:33:47 | Received SIGCHLD, checking JVM process status.
    STATUS | wrapper | 2013/01/16 20:33:47 | JVM exited in response to signal SIGKILL (9).
    DEBUG | wrapper | 2013/01/16 20:33:47 | JVM process exited with a code of 1, setting the wrapper exit code to 1.
    DEBUG | wrapperp | 2013/01/16 20:33:47 | server listening on port 32010.
    STATUS | wrapper | 2013/01/16 20:33:47 | <-- Wrapper Stopped
    Edited by: 982366 on Jan 16, 2013 9:21 PM

    Dear Satish,
    My email adds is : [email protected]
    Do u have any MSN or Yahoo Messenger, so you could guide me in real-time.
    I'm in Indonesia and my internet connection was extremly slow.
    I need to wait for 12 Hrs just to donwload the EXE. zip. And another 1 hours with failure installment process.
    I've told in the forum about my progress and still having difficulty to connect to the SQLPLUS in path.
    My aim is to get install iSQLPlus.
    I'm not urging you to assist me, just when you feel[b] free and happy, you can mail me back or chat online with me by providing me you messenger address.
    Thank you very much in advance for your geneoursity bow
    Warmest rgds,
    Harry.-

  • Need help diagnosing cause of printing issue w/ image distortion

    Hello, I'm looking for some expert advice for my print issue with image distortion (see above) on my files once setup and proofed by my printer.
    I have a large PSD background file out of photoshop (CMYK, 170mb psd) that is being placed into an InDesign document. No preflight errors, all correct SWOP cmyk settings, and I keep having issues where images distort on my printers proofs - they seem unable to explain the issue and can't offer any other suggestions beyond ("just try resaving/uploading again" which of course has an added fee with each upload...).
    The files are all fine on our end: on-screen, on our cmyk proofs, and our saved PDFs/packaged files. But everytime our printer opens these they seem to have these distorted image problems - scrambled images (almost as if there was a ghosted transparent image in the distorted area), strange lines (see above, and color distortion (usually greens and pinks, see above).
    Is this an issue with my settings/file formats? Maybe the issue lies on our printers end? I'll keep checking this throughout the day and provide quick answers to anyone who can help me get to the bottom of this.
    Adobe forums have been a huge help in years past so I decided this was by best bet for a resolution from those who know more than myself (or my printer), thanks for taking the time to help!
    - Ian

    Hello, I'm looking for some expert advice for my print issue with image distortion (see above) on my files once setup and proofed by my printer.
    I have a large PSD background file out of photoshop (CMYK, 170mb psd) that is being placed into an InDesign document. No preflight errors, all correct SWOP cmyk settings, and I keep having issues where images distort on my printers proofs - they seem unable to explain the issue and can't offer any other suggestions beyond ("just try resaving/uploading again" which of course has an added fee with each upload...).
    The files are all fine on our end: on-screen, on our cmyk proofs, and our saved PDFs/packaged files. But everytime our printer opens these they seem to have these distorted image problems - scrambled images (almost as if there was a ghosted transparent image in the distorted area), strange lines (see above, and color distortion (usually greens and pinks, see above).
    Is this an issue with my settings/file formats? Maybe the issue lies on our printers end? I'll keep checking this throughout the day and provide quick answers to anyone who can help me get to the bottom of this.
    Adobe forums have been a huge help in years past so I decided this was by best bet for a resolution from those who know more than myself (or my printer), thanks for taking the time to help!
    - Ian

Maybe you are looking for

  • Can I share my iphoto pictures with AT

    Can I share my iphoto pictures with my AT&T Uverse tv?

  • Enabling/Disabling PDF in Browser Option (Acrobat XI)

    Firstly, know that yes I understand that this setting is no longer found in and handled by Acrobat XI and that to enable or disable PDF in browser setting you enable/disable the add-on in IE (or other browser). In the hopes of making it more straight

  • Where are the MetaData Templates located in PS C6 on a Mac?

    Where are the MetaData Templates located in PS C6 on a Mac that you can add your contact and copyright information to? On a Windows machine they are located in Owner/AppData/Roaming/Adobe/XMP.  I have some templates that I want to copy from a Windows

  • I can't find a completed iMovie project

    I completed an iMovie Project containing stills, vids and soundtrack. When attempting to convert it to an mp4 file via 'Share' menu, I was told I had insufficient memory to 'Share' and suggested I close iMovie and re-open it. When I did so, my comple

  • Not getting looks in "Using .Mac w iPhoto 5, so trying here

    Received a couple of pictures via e-mail attachments. They are photos that came in as PDF files. I downloaded them to the desktop but cannot figure out how to get them into iPhoto. Dragging doesn't work and I don't see anyplace that would import.