Need help in registering HFM Sample applications with Shared Services

Hi all,
I have installed HFM 9.3.1 on the server and I have issues in locating the sample application in the HFM console. I want to register the sample application with Hyperion shared services. But when I tried opening the application, I do not see the sample application and also got an error saying,"cannot connect to server".
When I tried creating new application I got an error saying,"there is an error retrieving the user management project list.Please verify that the project exists".
All I want to do is, to provision the shared services users to the HFM sample applications. Could you provide some suggestions to overcome this issue? I'll appreciate your quick response.
Regards,
Leo

Try using the server name instead of the cluster name.

Similar Messages

Need help to register HFM sample applications in Shared Services

Hi all,
I have installed HFM 9.3.1 on the server and I have issues in locating the sample application in the HFM console. I want to register the sample application with Hyperion shared services. But when I tried opening the application, I do not see the sample application and also got an error saying,"cannot connect to server".
When I tried creating new application I got an error saying,"there is an error retrieving the user management project list.Please verify that the project exists".
All I want to do is, to provision the shared services users to the HFM sample applications. Could you provide some suggestions to overcome this issue? I'll appreciate your quick response.
Regards,
Leo

Try using the server name instead of the cluster name.

Registering an application with Shared Services

I just used HfmCopyApplication.exe to migrate an application from out production environment to a newly installed test environment. However, when I open in the HFM System 9 thick client in the test environment and try to "Open Application", I can see the new application listed (so I know the migration was successful), but I get a message saying "+This application is not registered with Hyperion Shared Services. Please contact your administrator.+"
Can anyone provide some insight? I don't know how to register an application that was migrated from another environment, and I'm hesitant to create a new application with the same name because I don't want to accidentally wipe the one out that was just migrated over. I've looked through the documentation for the HfmCopyApplication, but it only says that I need to register the migrated app with Shared Services... It doesn't tell me how.
Thanks.

that usually means that Workspace has not been configured to know that HFM is in the environment as well, or that for some reason you don't have access to that option.
On the machine where Workspace web component has been installed you will need to run the System 9 configuration utility and choose the task "Reporting and Analysis" and "Configure Web Server". When you get to the screen which asks you to specify the hostname and port of the individual web servers (Financial Reporting, Web Analysis etc) make sure that HFM is ticked on (checked) and that the hostname and port for the HFM web server are correct (should be port 80). Complete the steps with Next Next Next and Finish, then restart both the Apache http server and the Workspace web server (Tomcat/Weblogic/Websphere etc). After that, the next time you log in to Workspace and go to Navigate->Administer you should see the options relating to HFM.
If it is still not there, go to Help->About->Version Details and check that a version for Financial Management component is displayed. If a version number is displayed then it something to do with your access rights (maybe a Creator / Administrator group has been set in the HFM Server / Web Config utility, try to remove it and try again?). If no version number is displayed then Workspace still doesn't know about HFM component (the above step hasn't worked).
If you are not sure speak to the person who did the installation, or if you have a support contract with Oracle then contact Oracle support.

Want to know how to register performance mgmt arch with shared services

Hi All
I didn't find any option under EPMA in configuration utility(except deploy to application server) , how to get the remaining options . Did I make any mistake in downloading the software from edelivery. Why I'm unable to see the other options(cofig db, reg with shared services).. Basically where I will find the EPMA software.
thank You
regards
M.V

Transfer an Adobe product license
Mylenium

Need help in creating a sample application using Oracle I\PM 10gR3.

I am a new to Oracle I\PM 10gR3 and I need a guide to create a sample
application using Filer and a sample Process.
I have searched the net and was unable to find any documents. If any body has
any kind of guide to create an application please let me know.
Waiting for a response.

Please see Kenichi Unnai in his blog "How to use UWL API for NetWeaver BPM Tasks"
How to use UWL API for NetWeaver BPM Tasks
The .sca-file can be found on the sap service marketplace, afterwards you need to import the .sca-file, add the SC to your "MyComponents" and then you can select your necessary DC's.

Need help creating a voice chat application with java

Hi, all:
I'm currently using MSN messenger to talk to my friends online. However, the quality gets pretty low sometimes since MSN is a centralized service. So I was wondering if I know a friend well, and he gives me his IP, would it be better for me to just write a simple java app that captures audio from a microphone and send it over through a socket. Once the byte stream gets there, his side of the app can play it back. Of course, the packets I'm sending and receiving will just be normal TCP/IP packets, but we wouldn't have to go through a MSN messenger server, so would the audio quality be better in this case?

Maybe, but there is probibly other software you can use for direct connections. I would try these first.

How to register HFM aplication with Shared services

Hi,
Version 11.1.2
I am new to this version and asking help how to register HFM application with shared services.
In ver 9.3.1 we register in config utility.
Regards
Kumar

You should start the EPM system configurator, it is the same concept as earlier versions, just the look and feel is slightly different.
Cheers
John
http://john-goodwin.blogspot.com/

Register with Shared Services Failing in 11.1.1.3

Hi,
We installed 11.1.1.3 in Linux operating system and the application server is Websphere 6.1.After Installation and Configuration of EPM products we Externalized users from EAS Console and configured Active Directory in Shared Services and now want to migrate users of Existing Production environment to new Environment.For that created a new testgroup in Shared Services under Native Directory and when I am refreshing it's displaying an error as shown below:
Essbase failed to get roles list for [ESB:Analytic Server] from Shared Services Server with Error [32:1062:Failed to connect to the user directory [msadServer]
Can anyone suggest on this.
Any help is appreciated...

This usually happens when the application exists in Essbase but does not exist in Shared Services.
To resolve this you need to go into the AAS console, right click on the Sample application and select the 'REGISTER' option.
This will register the application with Shared Services. You should then see the application listed in Shared Services under the Analytic Server project.
You will need to make sure that the list of applications in the Analytic Server matches the list of applications under the project in Shared Services. If you have any other applications missing then please register those as well.
HTH-
Jasmine.

Registering Planning app with shared services

Hello all.
I created a new classic planning app (11.1.1) with the intention of mirroring our production app. I've copied that outline from the production app to the new app. I've also exported the sql server database used by the production planning app and restored it to the new app. Everything seems fine so far.
My question is about the registration of the new app in shared services. The production app has about 35 MSAD authenticated users. What would be the process for registering the new app with shared services and setting up users from the production app. I didn't specifically register the new app when it was created.
I'm a little apprehensive. I don't want to do anything that might affect the current production app. How can I register the new app and add users without affecting the current production app. Is it as simple as going to Administration -> Applications Settings and clicking on "Register Shared Services" and setting up new users? Or are there other steps that need to occur?
Any help is very much appreciated.
dave

You shouldn't need to register as you would of created a blank planning application at first that will be registered with Shared Serices, then the provisoning of users/groups in shared services for the planning application would be done, then you would migrate the relational database across.
You wil probably need to edit the shared services URL from within planning but no need to reregister.
Cheers
John
http://john-goodwin.blogspot.com/

DRM Integration with Shared services

Hi,
Could someone help me how to integrate DRM with Shared services? Is there any document which helps me with the same?
Thanks
Arathi.

Hi Arathi,
You'll be delighted to hear that I found a solution to your question.
1. Create a user in DRM and select to manage user in "Active Directory", LDAP or NTLM.
2. Create the same user in Shared Services (same name u wrote in DRM), give it a password then you're done.
3. When you log into DRM, it will use the shared services password.
It kinda bothered me that's why i gave it a thought and did a lil bit of reading to find it out. Hope you get it right.
Regards,
deep

Issue with shared services - Need Urgent Help please!!

Hello Experts
One of my customer has installed a new instance of oracle and copied all the schemas and data over to the new instance.
Now when they bring up shared services, have lost all our provisioning. None of the projects are recognized by shared serices and gets the following error when we try to bring up a user
'xxxxx' is not a recognized Shared Services project. Please contact your adminstrator
Is there something we need to do to restore Shared Services to its original state?
Thanks in advance.
Regards,
Sonu
Edited by: 637223 on Jan 20, 2009 2:19 AM

hi,
I doubt that "creating a new instance of oracle and copied all the schemas and data over to the new instance" will register the project with shared service and thats why giving error. Because when you install shared service, it asks you about the database name (oracle in your case) to register with. So even if you overwrite that database by new instance it gives error.
Have you tried the configuration utilty ? Over there you can provide the new database instanse as your database and configure your shared service. Remember that you need to do a complete configuration of shared service , analytic administration services and analytic services. After configuring, Restart the system.....it should work.
Hope this helps!
Regards,
James

Urgent: Error in registering HFM with Shared Services while configuration.

Hi,
I am installing HFM 11.1.2 on a 64-bit Server 2008 platform with my Foundation Services server is on different
Machine. I have installed installed HFM client, Web Application and Services on both the server.
But i have configured "Deploy to Application Server" on Foundation Server to have a single domain.
All other configurations are done on the HFM Server only.
But during to Deployment to application server my "Register with shared services" part fails.
My foundation services are running. Do i require to Configure DCOM on foundation server also.
Please suggest me some ways to solve this problem.
Regards,
Arvind

Johan,
you are right, now the user are given with dba priv ,
now i am getting the below error,
(Nov 11, 2008, 05:30:03 AM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Error:
com.hyperion.cis.config.ProcessingException
at com.hyperion.ess.EASDBConfigurator.configure(EASDBConfigurator.java:252)
at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeDBConfigTask(RunAllTasksWizardAction.java:282)
at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:151)
at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
Please let me know your suggestions.
Thanks,
bhavani

I need helping using iAds in my application.

I need helping using iAds in my application. I currently am not using any storyboards. I am using Sprite builder for my UI.
I attatched an image ot show all the different file name I have.
Everyone is being used & they all work fully.
The "iAdViewController.h & .m" files are just example codes I looked up and was messing with so that my iAd can work.

I wouldn't even be able to use the Mathscript node in an executable?
What I am trying to do is make a user configurable data stream.
They tell me how many bytes are in the stream and what parameters they
want to be put in to it. Currently I have to make vi's that are
called dynamicaly to make the parameters.   Then recompile
the code and send it to them. This is somewhat of how the config
file is set up so I know how to make the data.
Data_Type foo
Bytes 30
parameter_name
function
   byte#          format
sync
foo_sync
29               int
time
foo_time
1,2,3,4    double
If I can't use MathScript to allow the user to make there own functions
is there another way that I might be able to do this so I do not have
to recompile the code atleast? Were I might just be able to make
the new function and send that to them.
Any Idea would be great.

Registering a Partner application with Oracle SSO 10gR2

Hi Everybody
I'd like to ask a question around registering a partner application with Oracle SSO.
I have entered my home_url, logout_url and cancel_url e.g. home_url is https://vevopuitest1.co.uk/vevo_test1 and so on for the other fields.
When I save the details some information is automatically created e.g. Site Id, Site Token etc.
The bit that I am particularly interested in are the fields Single Sign-On URL and Single Sign-Off URL.
For my purposes these fields are respectively: https://cwassotest1.co.uk/pls/orasso/orasso.wwsso_app_admin.ls_login and https://cwassotest1.co.uk/pls/orasso/orasso.wwsso_app_admin.ls_logout
My questions are:
1. Where do these values come from?
2. Can I view them anywhere, say, in Oracle Directory Manager or using ldif queries?
I would like to be able to verify these values.
Many Thanks
Andy

I'm afraid this won't answer your question completely, but AFAIK in principle it does not matter on which machine SSO is running, as long as it passes the user id and credentials properly through the HTTP Header. Even more: in practice it is very common to have SSO running on a different machine than where your app runs.
So what I would do is find out how to use ADF Faces with SSO. Perhaps someone else can provide pointers on that.
Jan Kettenis

Need help in localizing the Flex Application

Hi,
I need help in localizing my Flex Application.
my Question is: How to make SPANISH as the default language of Flex Application(Progamatically)? By default its taking en_US as the locale but my requirement is to change it to sp_SP(SPANISH)..
Thanks in Advance..
Pradeep

Localization tutorial:
http://livedocs.adobe.com/flex/3/html/help.html?content=l10n_3.html
How to change the locale at runtime:
http://cookbooks.adobe.com/post_Change_Locale_at_the_runtime-11143.html

Need help in registering HFM Sample applications with Shared Services

Similar Messages

Maybe you are looking for