Need Help in Remote Manager and OIM Configuration

Guys,
I am using OIM9.1.01 with Exchange 2010 , currently i have installed my remote manager on Exchange server, and its working fine. Now client want to remove Remote Manager from exchange server , and to be get install on some other server.
will it possible to install Remote Manager on some other server than OIM and Exchange , if yes , how do i proceed with that.
Thanks.

Thanks Nishith Sirji,
I am confuse about one thing , how do remote manager will understand "which database server is he going to create mailbox"? because currently I am executing powershell on exechange system only ,so no problem. but when i will installl it on some other system, how do my RM will know , where to create Maiilbox (which machine).
do i need to configure my exchange box details anywhr in Remote Manager?
Thanks.

Similar Messages

Script that enables Remote Management and adds user

I need to make a script that can enable Remote Management and add a user to control it.
I have tried to watch which plist files it uses so I could edit those.
It writes some text in com.apple.RemoteManagement.plist and com.apple.ARDAgent.plist bit I can't find where the user is added.
Any ideas guys
Thanks

No need to mess around with .plists. ARD has a command-line admin tool. The syntax is a little funky, but this should give you an idea:
$ sudo /System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Resources/k ickstart -activate -configure -access -on -users john -restart -agent -privs -all
This is all covered in more detail in Apple's technote.

Difference between remote management and vnc

Difference between remote management and vnc

By VNC I will presume you mean 'Screen Sharing'.
Screen Sharing in System Preferences - Sharing is purely for remote control and is based on the VNC protocol with a few extra features added by Apple.
Remote Management in System Preferences does everything Screen Sharing does and is fully compatible with another Mac doing just Screen Sharing, i.e. it allows remote control. However it can also do additional things. It is intended for use with Apple's Remote Desktop Administration software which can use this to send files to a Mac, send (Unix) commands to a Mac and ask for a report from the Mac (e.g. how much RAM it has).
If you don't have Apple Remote Desktop there is no real point enabling Remote Management instead of Screen Sharing.
Both Screen Sharing and Remote Management can also be configured to allow 100% standard VNC connectivity from say a PC, as standard they only accept connections from Macs.

I need help, yesterday I installed and reinstalled the Yosemite system and take long to turn on my laptop, the bar takes to fill, and I'm worried. Can you help? thank

I need help, yesterday I installed and reinstalled the Yosemite system and take long to turn on my laptop, the bar takes to fill, and I'm worried.
Can you help? thank

revert back to Maverick that is what I had to finally do. This was the worst upgrade I have ever seen. Hopefully you have Time Machine backup and can revert back. It was pretty painless except for a few issues. I will wait until Apple gets their stuff together on this upgrade or may never will.

Need help with Blog, Wiki and Gallery

Hi Team,
Need help with Blog, Wiki and Gallery startup. I have newly started visiting forums and quite interested to contribute towards these areas also.
Please help.
Thanks,
Santosh Singh
Santosh Singh

Hello Santhosh,
Blog is for Microsoft employees only. However, you can contribute towards WIKI and GALLERY using the below links.
http://social.technet.microsoft.com/wiki/
http://gallery.technet.microsoft.com/

Need help FLASH not launching and not uninstalling "licensing for this product has stopped working".

Need help FLASH not launching and not uninstalling "licensing for this product has stopped working" and " you can only install one adobe product at a time please complete the other installation" Flash was working absolutely fine before, I have no idea why this happened.

I am having similar problem. Can't open any of CS3 programs after trying to download Dreamweaver Trial, which wouldn't work because "couldn't remove DLM extention" error message. So now I can not run Illustrator, Photoshop, or even Adobe Reader. These are properly licensed for about a year. I get "License for product has stopped working". Have 2 pending cases open with Adobe support (one for Dreamweaver trial, one for license problem) since 8/3 with NO ANSWERS - It says answers within 1-3 business days. Was on phone support hold today for over 3 hours before line went dead with no help. What is up with adobe support? Can anyone help?

I need help importing navigation bars and rollover buttons from fireworks?

I need help importing navigation bars and rollover buttons from fireworks, drop down menus and rollover states won't work!
Thanks

In my experience, the code created by graphics apps is less than satisfactory. And image based menus are very awkward for several reasons.
#1 If you decide to change your menu later, you must go back to your graphics app and re-craft the whole thing. After 2-3 times of this, it gets old in a hurry.
#2 Image based menus cannot be "seen" by search engines, screen readers and language translators.
#3 CSS styled text menus are better for your site's visibility, accessibility and they are a snap to edit in Dreamweaver.
That said, if you're still married to image based menus, use Fireworks to create images only. Use Dreamweaver's Image Rollover Behaviors to create your rollover scripts.
Nancy O.

Open Item Management and Taxation Configuration Material Needed

For an interview, needed is some help;
- Open Item Management - Definition and how it is managed.
- Taxation Configuration - Configuration Documentation
- FI - HR integration - Documentation.
Any help would be of great help.
Points awardable.

Hi,
When a GL is created it can be a normal GL account or an open item managed GL Account. In case of an open item managed GL Account the debites and credits are knocked off and the net balance in the account indicates the amount amout due or amount receivable etc.
Some of the examples of GL Accounts are GR/IR clearing account, Bank clearing account, accrual accounts, Prepaid AAccounts, Loan account etc.
By default Customer and Vendor Accounts are open item managed accounts.
In SDN you can search for the documentation of Tax configuration. There are several threads on this topic.
Thanks
Murali.

Need help in getting 'RoleApprover' and 'Manager of RoleApprover'

We are developing a Custom Role Approval Process using SOA composite.
A manager or a delegated admin will be raising a Role Approval request for a beneficiary. We need to assign the Approval task to beneficiaries' manager or Role Approver.
If the RoleApprover does not Approve the task in stipulated time, the task needs to get escalated to RoleApprover's manager.
I'm new to OIM APIs, i was folllowing the tutorial "developing_oim_custom_approval_process_for_role_request.pdf". This needs an user defined field 'RoleApprover' created in the Role request form. We cannot create user defined field in the role request form.
I need help in getting the 'RoleApprover' and the 'Manager of RoleApprover' programmatically.
Payload from the OIM Approval request follows:
<ns2:process>
<RequestID>176</RequestID>
<RequestModel>Assign Roles</RequestModel>
<RequestTarget>Onhand Quantity</RequestTarget>
<RequesterDetails>
<FirstName>Steve</FirstName>
<LastName>Waugh</LastName>
<Login>STEVEWAUGH</Login>
<DisplayName>Steve Waugh</DisplayName>
<ManagerLogin>XELSYSADM</ManagerLogin>
<OrganizationName>Test</OrganizationName>
<Email>[email protected]</Email>
<Status>Active</Status>
<XellerateType>End-User</XellerateType>
<UserType>Full-Time</UserType>
<Role>ALL USERS</Role>
<Role>Primavera P6 - Global</Role>
<Role>iProcurement Catalog Administrator</Role>
<Role>Onhand Quantity</Role>
<Role>Test Purchasing Super User</Role>
<Role>Test Delegated Administrator</Role>
<Role>HELPDESK ADMINISTRATORS</Role>
<Role>Test e-Commerce Gateway Super User</Role>
<Role>eBusiness Finance</Role>
<Role>Test Line Manager</Role>
<Role>Test_ApplicationApprover</Role>
</RequesterDetails>
<BeneficiaryDetails>
<FirstName>David</FirstName>
<LastName>Boon</LastName>
<Login>DAVIDBOON</Login>
<DisplayName>David Boon</DisplayName>
<ManagerLogin>STEVEWAUGH</ManagerLogin>
<OrganizationName>TestCO</OrganizationName>
<Email>[email protected]</Email>
<Status>Active</Status>
<XellerateType>End-User</XellerateType>
<UserType>Full-Time</UserType>
<Role>ALL USERS</Role>
<Role>Hyperion</Role>
<Role>Test Purchasing Administrator</Role>
<Role>Test Internet Expenses Audit Manager</Role>
<Role>Test Internet Expenses Auditor</Role>
</BeneficiaryDetails>
<ObjectDetails>
<name>Test Onhand Quantity</name>
<attributes/>
</ObjectDetails>
<url>
http://host:port/workflowservice/CallbackService
</url>
<OtherDetails/>
</ns2:process>
Edited by: rajesh on Feb 13, 2011 9:00 AM

Choose Xerces2.4 to serialize the DOM object is an option.
javac XercesTest.java -classpath xmlParserAPIs.jar;xercesImpl.jar;.
java -classpath xmlParserAPIs.jar;xercesImpl.jar;. XercesTest test.xml
below is the source file: XercesTest.java
//JAXP
import javax.xml.parsers.*;
import org.w3c.dom.*;
//APACHE SERIALIZE FUNCTION
import org.apache.xml.serialize.*;
class XercesTest
public static void main(String[] args) throws Exception
DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
DocumentBuilder builder = factory.newDocumentBuilder();
Document doc = builder.parse( new File( args[0] ) );
File f = new File( "copy_of_"+ args[0] );
OutputFormat format = new OutputFormat("xml","UTF-8",true ) ;
FileOutputStream fout = new FileOutputStream( f );
XMLSerializer ser = new XMLSerializer(fout, format );
ser.serialize( doc );
maybe it's helpful
land

How to execute vb script with out using Remote manager in oim 11g r2

Hi Currently,
i have a requirement to execute vb script (present on a remote machine in which connector server is installed) from oim machine while using Exchange connector (11.1.1.6).
This can be achieved by using remote manager,but i dont want to use remote manager.
Hence decided to use Action scripts.
As per connector configuration,
i have configured Action scripts in Lookup.Exchange.UM.Configuration lookup definition, by means of three entries
After Create Action Language      Shell
After Create Action Target           Resource
After Create Action File              /home/scripts/Disable.bat
Disable.bat has the following ,
Powershell.exe -File C:\scripts\Setup.vbs
-%Log on Name%
Exit
As Setup.vbs is expecting a parameter of log on name, i was providing the same.
But while creating the user,as this script gets called, getting the following error and hence 'create User' is getting failed.
Problem while PowerShell execution System.Management.Automation.RemoteException: This task does not support recipients of this type. The specified recipient XXXXXXXXXXX...XXXXX is of type UserMailbox. Please make sure that this recipient matches the required recipient type for this task.
While provisioning the user to Exchange , i have selected 'Recepient type' as 'User Mail box' explicitly, but still getting the error.
Please provide any pointers to resolve the issue.
Thanks in advance
Kumar

As far as I know Oracle and MySQL are two different products.
Why do you clutter an Oracle forum with MySQL questions?
If MySQL is such a tremendous RDBMS, like many people state (as 'free' means per definition better),
why don't you visit a MySQL forum where fellow MySQL aficionados can answer you MySQL questions?
In short, why don't you stop abusing Oracle forums?
Sybrand Bakker
Senior Oracle DBA

Need help connecting to 360 and pc with internet

im new to using routers and i lost the manual and the box and i need help using the router the model number is NH1005,V2 fast ethernet 10/100 5-port Hub and it is a linksys so can someone help me im confused and i need the ip addreess or something
thanks in advance

Hi....
A network HUB is a network device that is used to connect multiple computer so that they can share the resources. In more general way a hub can be defined as a common connection point for devices in the network.
There are hubs that can be managed by an administrator. In case of NH1005 it is not a manageable HUB. Connect the devices to the HUB and if the devices are properly configured they will communicate with each other.

Need help with load balancing and DNS proxy

Hi,
I need help on how to configure my router so it will work with my DNS proxy and load balancing.
I have a Linksys LRT224 router. I have two broadband connections from two separate ISPs,500Mbps each (WAN1 & WAN2). WAN1 has a static IP and WAN2 is dynamic assigned. I use Unlocator (www.unlocator.com) so I can access geographically restricted sites (Pandora, Netflix, etc.).
The problem I have is that unlocator registers only one IP address (WAN1 address) and since I am doing load balancing I have no way of knowing if the DNS request will go through the registered IP (WAN1) or through the other (WAN2). I am not an expert in routing or networking but I'm guessing I have a way of configuring the router so all the DNS requests go out through WAN1, right?
In the router's Dual WAN config page there is a section for Protocol Binding. I tried to configure but only managed to screw up the internet at home. I used:
DNS[UDP/53-53]->192.168.1.1-192.168.1.254(0.0.0.0-0.0.0.0)WAN2
Any help or suggestions are appreciated.
Alex

Good solution though. That's probably the only way you could do true Load Balancing anyway.
Please remember to Kudo those that help you.
Linksys
Communities Technical Support

Need help with load balancing and DNS proxy -Repost

Hi,
I need help on how to configure my router so it will work with my DNS proxy and load balancing.
I have a Linksys LRT224 router. I have two broadband connections from two separate ISPs,500Mbps each (WAN1 & WAN2). WAN1 has a static IP and WAN2 is dynamic assigned. I use Unlocator (www.unlocator.com) so I can access geographically restricted sites (Pandora, Netflix, etc.).
The problem I have is that unlocator registers only one IP address (WAN1 address) and since I am doing load balancing I have no way of knowing if the DNS request will go through the registered IP (WAN1) or through the other (WAN2). I am not an expert in routing or networking but I'm guessing I have a way of configuring the router so all the DNS requests go out through WAN1, right?
In the router's Dual WAN config page there is a section for Protocol Binding. I tried to configure but only managed to screw up the internet at home. I used:
DNS[UDP/53-53]->192.168.1.1-192.168.1.254(0.0.0.0-0.0.0.0)WAN2
Any help or suggestions are appreciated.
Alex

Good solution though. That's probably the only way you could do true Load Balancing anyway.
Please remember to Kudo those that help you.
Linksys
Communities Technical Support

FCP Novice needs help with video quality and FCP 5!!

Hi,
I have a real problme that I cannot seem to fix. I think its because I am doing something really wrong!
I have a Sony HC42E MiniDV Camcorder which by default records video in full widescreen. I recorded several tapes this way and have now begun trying to edit them in FCP 5.04 (Tiger 10.4.6). Whenever I log and capture my clips they appear to be fuzzzy and unclear on the Mac monitor whilst being totally crisp and sharp on the camcorder viewfinder. I tried capturing using the DV PAL 48Khz Anamorphic Preset which keeps everything the right size (the final output needs to be true widescreen and not with black bars added) but the resulting video on screen is blurry and bitty. I then tried capturing using the DV PAL 720 x 576 normal preset and the video is a little clearer on the screen (for both presets I have chosen lower field dominance) but when I play back it plays back in widescreen on the mac canvas window but at 4:3 on the camera's viewfinder.
I then assumed that maybe this is just becuase the mac screen (CRT by the way) doesn't use fields. So I exported the sequence as a QT movie using DV PAL 16:9 and used quicktime (OS9 Classic - my compressor has never worked because of the dreaded "unable to connect to baackground process" problem which I've never managed to correct) to convert it to MPEG2. When I import this as an asset into DVD Studio pro 4 and set the track size to 16:9 it comes through at the right aspect ratio. However it looks blurry on screen. Thinking that this will be fine on a TV I burned the disc - inserted it into my DVD player (a good one!) and watched it on my new 32" widescreen TV (a good one!) and the picture qualitty is poor. Its so much blurrier and bittier than the original footage looks when played through the camcorder's viewfinder!
The final footaage looks like an old VHS recording that's a year or two old!
Does anyone know how I can capture my footage in FCP with the maximum quality, edit it without quality loss and the export it for DVD again without such significant quality loss whilst all the time keeping it at proper 16:9 widescreen?
Is there some presets I should be working to?
I'm tearing my hair out! Help!

Hi Guys,
thanx for your replies.
here's the latest:
Brian, I followed your instructions and the DVD burned successfully. However the video quality of the dvd when viewed on my TV ('ve tried on all 3 of my tvs now) is still a lot poorer than the quicktime movie that was imported into DVDSP4. When I play the original QT Movie on my Mac CRT monitor it looks a little blurry and grainy because I guess its non interlaced however when viewed on an external Video monitor it looks great - very sharp.
When I view the burned DVD on my television the picture quality looks like the non interlaced version of the original QT Movie that appeared on my Mac CRT and not the sharp interlaced (lower field) version that appeared on my external video monitor.
Its almost like taking a sharp jpeg into Photoshop and applying a gaussian blur of about 0.3 followed by jepg compression compressing it down to 5% quality!
I'm totally mystified. Can the conversion to Mpeg2 be removing all interlacing so that you get the less sharp computer monitor look? I just want the video on my final DVDs to be as good as the original source footage! I appreciate that along the way there might be loss of some quality but surely not that much?
Does this make sense to you guys or am I still doing something very wrong?
Robert: I have tried setting all manner of drives including a fresh external firewire HD with nothing on it (clean out of the box) but it doesn't seem to help.
Brian: I tried the no network suggestion a few months back but I'm not sure if I got it right. At the moment I have broadband through an external speedtouch usb modem and am also connected (occasionally although not for the last 3 months) via a crossover cable to my PCs ethernet card. When I last tried the No Network solution I had immense trouble getting my internet to work again! Can you please help me by directing me to the best ay to do this while protecting my internet settings?
any more help guys would be greatfully appreciated.

Need help with rented movies and Apple TV

I rented two movies from the iTunes Store from my laptop rather than my Apple TV. I cannot get the rented movies to show up on my Apple TV. I've tried to "move" the two movies from my laptop to Apple TV via the Apple TV tab in iTunes where it shows both movies under a "Rented Movies" section and gives me the option to "move" each one to my Apple TV, but when I click on each movie to move it to the Apple TV and then hit "Apply," nothing happens (at least as far as I can tell). Is there someplace special I need to find rented movies using my Apple TV remote? I clearly need help, please!

Hi Winston,
I have purchased the third generation of Apple TV but have not installed it yet, so I am still using my second generation Apple TV, for which I posed this question. Is the answer different when using Apple TV II?

Need Help in Remote Manager and OIM Configuration

Similar Messages

Maybe you are looking for