Need help in resolving INS 32012 Unable to create a directory error

Hi Everyone,
I am trying to install the Oracle 11g Release 2 on Ubuntu 12.04 32 bit system.
I have folder "_/u01/app/oracle/oradata_" created and user "_oracle_" is the owner..Here is the screenshot http://i46.tinypic.com/jhsqj9.jpg
But still i am receiving the error saying not able to create the folder as mentioned in this image http://i47.tinypic.com/287qiqh.png
Can any one please help me?
Thanks in Advance

979600 wrote:
Does it mean oracle 11gR2 cannot be installed on ubuntu 12.04. But i have seen so many posts on internet where people had success..
Perhaps, but the fact that oracle doesn't certify their product on Ubuntu means you are pretty much on your own. Why don't you use a certified platform? Oracle Linux is certified, and the cost is US$00.00
I also read the installation guide and it does not say anything.
The error i am receiving seems to be a very trivial one may be i am not sureIt would appear that whatever account you are using to run the installer is unable to create one of the directories mentioned. Do you have the necessary privileges? Is there enough disk space?
But again, as long as you choose to ignore the prerequisite of a certified OS .....

Similar Messages

I need help in resolving a problem that prevents me from accessing the iTunes store. Message reads " iTunes cannot contact the iTunes store" and also says that my laptop is no longer authorized to access my account. Help!

I need help in resolving a problem that prevents me from accessing the iTunes store. Message reads " iTunes cannot contact the iTunes store" and also says that my laptop is no longer authorized to access my account. Help!

Go up to the top of your screen on iTunes and click on 'Store'. Then go down to 'Authorize This Computer'. That should cover part of it unless you've already authorized a bunch of other computers to use your account. If that's the case, you'll have to go to one of those computers and click the button just below it to 'deauthorize your account' from that computer. If you're not able to access the store, check your internet connection to make sure you are connected. Hope this helps.. good luck!

I purchased Creative Cloud through the Employee Purchase program. Had to reimage system. Need help reinstalling application. I have "redemption" code, but get error saying it has already been redeemed. Please advise.

I purchased Creative Cloud through the Employee Purchase program. Had to reimage system. Need help reinstalling application. I have "redemption" code, but get error saying it has already been redeemed. Can you please advise how I go about getting my software reinstalled? If I was given the serial number when I redeemed, I don't have any record of it.
Thank you,
Starla

Hi Starla Mehaffey,
I would suggest you to sign in with your Adobe ID during installation and your product will automatically recognize your membership details.
Refer this Link for any further assistance:- Redemption Code Help
Hope that helps,
Regards,
Rahul Tyagi

After upgrade to CF9, CFIMAGE "Unable to create temporary file" error

We recently upgraded from CF8 to CF9 Enterprise. I'm getting an "Unable to create temporary file" error on
my CFIMAGE resize calls. We use sandbox security. I assume I need to grant write access to whatever folder CF uses for temp files, but which folder is it? The same code (and sandbox settings) ran fine in CF8....
Note, if I attempt to add C:\JRun4\servers\cfusion\SERVER-INF\temp to the sandbox for this particular app, CF crashes on all requests across all apps on the server with a:
Security: The requested template has been denied access to C:\JRun4\servers\cfusion\cfusion-ear\cfusion-war\WEB-INF\cfclasses\cfapp2ecfc1510154633.c lass.
The following is the internal exception message: access denied (java.io.FilePermission C:\JRun4\servers\cfusion\cfusion-ear\cfusion-war\WEB-INF\cfclasses\cfapp2ecfc1510154633.c lass read)
ColdFusion cannot determine the line of the template that caused this error. This is often caused by an error in the exception handling subsystem.
I need to restart CF to get everything working again.

Another update. Had a problem with a sandboxed CF9 site doing a simple CFIMAGE READ to a memory variable. Got an "Unable to create temporary file" error.
Inserted the following code in the file upload page:
<cfscript>
writeoutput("Temp Dir : " & createobject("java","java.lang.System").getProperty("java.io.tmpdir") );
</cfscript>
... and it reveals the temp directory as C:\WINDOWS\TEMP. Added that to the sandbox, and the CFIMAGE READ is working properly now.
Note this seems inconsistent with CFIMAGE RESIZE behavior which appears to use the CF GetTempDirectory() value, which in my case is C:\JRun4\servers\cfusion\SERVER-INF\temp\cfusion-war-tmp\
For reference, see the section "Sandbox Considerations" at this link:
http://help.adobe.com/en_US/ColdFusion/9.0/Admin/WSc3ff6d0ea77859461172e0811cbf364104-7fc8 .html#WSc3ff6d0ea77859461172e0811cbf364104-7fcc

Unable to create Application. Error No: -2147024891

Hi,
I am trying to create an application in Hyperion Planning Version 4.0.1
Even though I have followed the exact instructions in Oracle Installation Guide, I keep getting following error.
Unable to create Application.
Error No: -2147024891
Kindly suggest, how can I troubleshoot for this.
PS. I have gone through the posts on same topic but that did not helped me.
Regards,
Jitendra

Hi,
I had set up CSS Properties file and as follows:
<?xml version="1.0" encoding="UTF-8" ?>
- 
- <css>
- <hub location="http://hic-pcs27303:58080">
<dirPort>58089</dirPort>
</hub>
- <spi>
- <provider>
<native name="Native Directory" />
</provider>
</spi>
- <searchOrder>
<el>Native Directory</el>
</searchOrder>
- <token>
<timeout>480</timeout>
</token>
- <logger>
<priority>WARN</priority>
</logger>
</css>
I got the problem. it is with DCOM account. I am adding a user in my LAN network, after clicking apply it taking the user in System account not in the domain account. e.g: I logged into my Sys(no: hst-pcs5424) with ABC domain, added a user ns36225 in this domain. During application setup it is looking for DCOM account in hst-pcs5424 account not in my ABC domain. So i need to add a user to the system account that should work without the LAN netwrok. But now my user account won't work with LAN.

Rep-0118:Unable to create temporary file error in Report Builder

I have installed Report Builder (latest edition) for windows 2000 server, but my users on windows XP cannot create the report it gives them
Rep-0118:Unable to create temporary file error
Please help me out
Vijay

You have to change registry settings by going through REGEDIT. Under hkey_local_machine/software/oracle/<oracle home>, look for variable REPORTS_TMP. Change value for this, for example c:\windows\temp or something like that where you want oracle reports to create temp files.

Disk Utility: Unable to create "ImageName.dmg" error -39

Ladies,
Gentlemen,
I used Disk Utility to backup the internal hard drive of my iMac G5 iSight.
The last backup of the hard drive was unsuccessful, ending with next message: Unable to create "ImageName.dmg"; error -39.
The iMac is running OS X 10.4.11.
I proceed as follows:
Boot from the OS X 10.4.2 installation DVD and firing up Disk Utility.
Menu option: File, New, Disk Image from disk0s3 (Mac HD)
The target disk is Porche_LaCie FireWire drive.
After +/- 2 hours I end up with the above message.
The hard drive has following characteristics:
Name : Mac HD
Type : Volume
Disk Identifier : disk0s3
Mount Point : /
File System : Mac OS Extended (Journaled)
Connection Bus : ATA
Partition Type : Apple_HFS
Device Tree : sata/k2-sata@0/@0:3
Writable : Yes
Universal Unique Identifier : 9AFCA71A-DD8B-376E-9776-EE7EDDBB328C
Capacity : 148,9 GB (159.907.627.008 Bytes)
Free Space : 96,9 GB (103.996.362.752 Bytes)
Used : 52,1 GB (55.911.264.256 Bytes)
Number of Files : 419.419
Number of Folders : 104.321
Owners Enabled : Yes
Can Turn Owners Off : Yes
Can Repair Permissions : Yes
Can Be Verified : Yes
Can Be Repaired : Yes
Can Be Formatted : Yes
Bootable : Yes
Supports Journaling : Yes
Journaled : Yes
S.M.A.R.T. Status : Verified
Disk Number : 0
Partition Number : 3
The target drive characteristics:
Name : Porche_LaCie
Type : Volume
Disk Identifier : disk1s1
Mount Point : /Volumes/Porche_LaCie
File System : Mac OS Extended (Case-sensitive, Journaled)
Connection Bus : FireWire
Partition Type : Apple_HFS
Device Tree : fw/node@d04b7417066788/sbp-2@c000/@0:1
Writable : Yes
Universal Unique Identifier : BCCEBED2-08F5-3C21-8750-75716AF060B9
Capacity : 232,9 GB (250.056.705.024 Bytes)
Free Space : 160,8 GB (172.646.076.416 Bytes)
Used : 72,1 GB (77.410.627.584 Bytes)
Number of Files : 15
Number of Folders : 4
Owners Enabled : No
Can Turn Owners Off : Yes
Can Be Formatted : Yes
Bootable : Yes
Supports Journaling : Yes
Journaled : Yes
S.M.A.R.T. Status : Not Supported
Disk Number : 1
Partition Number : 1
The target drive already contains 3 earlier images. The biggest image has a size of 28,14 GB. And as you can see this drive ha enough place for other images.
So what is going wrong?
I Googled for this error -39 without any success and I have not found any thing about this particular error in Apple's discussions or support pages.
I would feel a lot safer with a decent image of my Hard Drive. I already lost one and do not want to repeat this again...
Can any one help?

If you want to create a backup of your system volume, then do not use disc images. They are not bootable. Here's a far better solution:
How to Clone Using Restore Option of Disk Utility
1. Open Disk Utility from the Utilities folder.
2. Select the backup or destination volume from the left side list.
3. Click on the Erase tab in the DU main window. Set the format type to Mac OS Extended (journaled, if available) and click on the Erase button. This step can be skipped if the destination has already been freshly erased.
4. Click on the Restore tab in the DU main window.
5. Select the backup or destination volume from the left side list and drag it to the Destination entry field.
6. Select the startup or source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
You can also do the same using other backup utilities that can create bootable backups:
Backup Software Recommendations
My personal recommendations are (order is not significant):
1. Retrospect Desktop (Commercial - not yet universal binary)
2. Synchronize! Pro X (Commercial)
3. Synk (Backup, Standard, or Pro)
4. Deja Vu (Shareware)
5. Carbon Copy Cloner (Donationware)
6. SuperDuper! (Commercial)
7. Intego Personal Backup (Commercial)
8. Data Backup (Commercial)
Also read How to Back Up and Restore Your Files.

"unable to create *file name*" error

I imported videos from ipod touch to iphoto. Then i try to export the videos on either desktop or external hard-drive and it gives me the "unable to create *file name*" error in both cases. To export videos i go FIle-Export, choose kind "original". Tried to do it with several different albums, and it doesn't work on any of them. Didn't have an issue for exporting pictures though.
Please help!
Nina

What exactly was selected when you did the test?
Regards
TD

Unable to create "filename.dmg" (error -60008) {Disk Utility Problem}

Hi:
I’ve used Disk Utilities awesome capabilities many times, but am now running into my first real problem.
I am trying to create a 100 GB new blank disk image, using the “Mac OS Extended (Journaled) option for format, 256-bit AES encryption, a single partition-Apple Partition Map, and Image Format as read/write disk image.
When I implement this, it asks for the AES password then repeatedly crashes, albeit in slightly different ways each time. The most informative was a Unable to create “filename.dmg” (error -60008) message. I can’t find anything explanatory about this in Google
I’m wondering if this has something to do with my upgrade to Lion (OS 10.7.4) yesterday from Snow Leopard.
This error occurs on both my home and work iMacs. It seems to reliably occur about 1/2 way through typing in my password. The error occurs whether I use 128 or 256 AES encryption.
There is more than adequate space on the hard drive I am attempting to place this image on. Disk Utility is version 12.1.1 (353) and all is running on a 2.66 GHz Intel Core i5 iMac.
Any advice would be greatly appreciated! Thank you
PS: This is a duplicate post from the OS Lion forums ( https://discussions.apple.com/message/18410534#18410534 ), but since a) it occurs on both my Intel iMacs, b) I totally rely on Disk Utility's capabilities, so this loss with the Lion upgrade really hurts, and c) we've had no luck in the Lion forums, we're hoping someone here has seen this issue and can help. Much appreciated.

Hello, I believe that's an authentication error, thinks your not an admin account. Might try this...
Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, move this folder to the Desktop for now...
/Users/YourUserName/Library/Preferences/ByHost /
reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

Fit Image CS4: Error: Unable to create Window - OS error [1400]:210

Hi there,
I'm running Vista Ultimate 64 bit Photoshop CS4 Extended and have come across a problem with the Automate/Fit Image script. I have read the other posts here concerning a bug in the script, but I'm not even getting to the stage of the script giving me any options to run - I just get the following in a Script Alert message box: Fit Image CS4: Error: Unable to create Window - OS error [1400]:210
I can see that the script is in the Presets/Scripts directory OK. Anyone with any ideas please?

Thanks for that reply. I tried this again and it's working now. The only thing I can think of is that I have closed and opened Photoshop a number of times since having the problem and that may have fixed it.
I find that if I am doing a lot of work in quick mask mode on large images with the pen tool, after a while, Photoshop starts to develop a very significant lag time, taking a number of seconds to draw the next point or respond to the tool (I'm on Vista 64 bit with 12 GBs of RAM, so it shouldn't be RAM, GeForce 8800 GTS video card 640MB dedicated video memory). I find that I have to frequently close Photoshop to get the tool response time back to normal. Perhaps the inability to draw a dialog box was somehow linked with this kind of problem....

Need help in resolving J2EE Deployment SPI error BEA-260101

I have a portal application (ear) currently working on weblogic 10.2. I upgraded my project to 10.3 using workshop, then made an ear and deployed it on 10.3
The following error is being displayed on 10.3.
+<Error> <J2EE Deployment SPI> <BEA-260101> <Parameter 'DDBeanRoot' may not be null.>+
Any help in resolving this will be highly appreciated.

Hi,
The following is the description of the error :-
BEA-260101 Error: Parameter 'paramName' may not be null.
Description Misuse of an API
Cause A null parameter was passed to the method.
Action Resolve client programming error
Link:[wls/docs100/messages/SPIDeployer.html]
Hope this helps :)

Unable to Create Connection ( Connection error DA0005) in DESKI 3 TIER

Hi ,
I have strange error of connection in DESKI 3 Tier.
Work Flow:
=> Wanted to create a deski report in Three Tier( from Infoview) using specific universe.
=> When I ran query it gives me error saying Connection error DA0005( Unable to create connection)
Work around did
=> Created Webi report using same univerese reprort ran fine.
The connection is there on enterprise I don't know whats going wrong.
Can any one help me with this error
Neo.

Hi Experts ,
Any suggestions on this please
Environment : BOXI 3.1 SP3 , OS: AIX , APPS: WAS7, DB Trying to connect is DB2

ORA:01658 Unable to create initial extent error

Gurus,
While importing a .dmp file I am getting following error
IMP-00003 : Oracle error 1658 encountered
ORA-01658: Unable to create INTIAL EXTENT for segment in tablespace INDX
IMP-000017: following statement failed with ORacle error 1658:
" CREATE INDEX "CSDT_RQS_INDEX" ON CSDT" ( "BASE_MASTER_KEY")PCTFREE 10 INTRANS 2 MAXTRANS 255 STORAGE(INTIAL 7864320 NEXT 131072 MINEXTENTS 1 MAEXTENTS 4096 PCTINCREASE 0 FREELISTS GROUPS1 BUFFER_POOL DEFAULT
TABLSPACE "INDX" lOGGING.
Please help to figure out what's wrong?
Thanks in advance.

With this SQL Statement you can find out the spaces in tablespaces.
SQL> select u.tblspc "TBLSPC", a.fbytes "ALLOC", u.ebytes USED, a.fbytes-u.ebytes UNUSED,
2 (u.ebytes/a.fbytes)*100 USEDPCT
3 from (select tablespace_name tblspc, sum(bytes) ebytes
4 from sys.dba_extents
5 group by tablespace_name) u,
6 (select tablespace_name tblspc, sum(bytes) fbytes
7 from sys.dba_data_files
8 group by tablespace_name) a
9 where u.tblspc = a.tblspc
10 ;
TBLSPC ALLOC USED UNUSED USEDPCT
CARTEST_DATA 891289600 488701952 402587648 54,8308824
CARTEST_IDX 83886080 46465024 37421056 55,390625
CARTMPTEST_DATA 41943040 26935296 15007744 64,21875
RBS 541065216 104857600 436207616 19,379845
SYSTEM 471859200 373547008 98312192 79,1649306
TEMP 209715200 58654720 151060480 27,96875
6 rows selected.
SQL>
Joel Pérez
http://otn.oracle.com/experts

Disk Utility "Unable to create" Disk Image "error -39"

I am trying to create a disk image using Disk Utility of my wife's user area for backup. Everytime I try, I get the same result. Disk Utility spends several hours creating the archive, then at the very end it generates an error message and terminates the process. The error message is always "unable to create "user" - error -39".
The problem follows her data and not her computer. I backed up her user to an external drive and did the image creation on another computer. Same result.
When I do the same on my computer, the process completes fine.
What problem is Disk Utility having? Where can I find the meaning of Disk Utilitility's -39 error?
PowerBook G4 Mac OS X (10.4.5)

I am still experimenting. To narrow the problem, I decided to create individual disk images of the folders in the User folder. The first one I tried was 7 GB and worked fine. Overnight, I tried one that is 13 GB. It failed with an out of room message on the startup disk! The startup disk has 17 GB free. Nothing should have been written to the startup disk!
This time, I configured Disk Utility to read from the startup disk and write to an external disk. The destination disk had more than enough space. But, I ran out of space on the source. It appears that Disk Utility is writing all or a portion of the compressed file to either the startup or the source disk and running out of room.
Previously, when I created the image of my user folder (instead of my wife's), the source was my user folder on the startup disk and the destinaion for the image was on an external disk. The difference I see is that my startup disk has enough free space for the entire compressed image file.
In my first attempt that gave me the -39, both the source and the destination disks were external. So maybe Disk Utility is creating the image on the source and at the end copying it to the destination. This would explain the difference in the error messages.
I'll try to confirm all of this in the next few days and report my findings.

Screen Shot Error - Unable to create type string error

I had this message after I tried to change via Terminal the .png standard file capture into .jpeg format.
Does anyone has any solution that will reset and make it work again?
" The attempt to take a screen capture has failed. The error is: 'Unable to create type string."

Download and use the free TinkerTool.

Need help in resolving INS 32012 Unable to create a directory error

Similar Messages

Maybe you are looking for