Need help in runtime error
I try to run the ausp dbtable.
with entries of object: 00001019680 and more that 1300 entries
Inter char. sr_code
classtype: z01
the problem is display in a short dump with this message
There is no help text for this runtime error either the text was inadvertently deleted or the release of the kernel differs from that of that of the database.
Thanks.
I hope you could help me. I need it urgent
Hi rhym,
Thta soounds like a memory issue to me. At least that is what causes that to happen to me.
The 'slice' of data you are requesting, based on your criteria, may be more mega bytes than the memory buffer. Too much data perhaps.
When this happens to me I have to take smaller chuncks of data, multiple extractions, then paste them all together.
Try half the number of entries, and see.
RS
Similar Messages
-
Need help with Runtime error! Can't find "MediaDatabase" file! Folders are visible!
Hi, I have been searching a lot for an answer to this issue. Elements keeps crashing after about five minuets and giving me "Microsoft Visual C++ Runtime Library" "Runtime Error!" "R6025 - pure virtual function call". I am running Premiere Elements 9.0 on windows 8.1 and I am trying to
rebuild the "mediadatabase.db3" file, but cannot find it. I made my hidden folders visible, and followed the pathway, but I only get this. I have searched and searched but I can't find anything about windows 8.1. Only 7 and vista. Thanks in advance!Look for a line that resembles the following in the
actionscript of the Flash fla files... It is likely to be in the
first frame's code, but may not be.
xmlData.load("teamTSI_en.xml");
the '
xmlData' part of that is not likely to be the same as what's
in your file, it's a variable so it could be anything, and the file
names will be whatever your xml files are.
If you can post that line of code from each of the fla files,
someone may be able to tell you where you need to place the xml
files. -
I have recently formated my laptop and installed Adobe Reader. Every time I try to open a .pdf I get the message below:
Runtime Error!
Program: c:\program files\adobe\reader 9.0\readeacroRd32.exe
This application has requested the Runtime to terminate it in an unusual way. Please contact the applications support team for more information.
I always click to report it to windows but there is no link to fix this issue. What can I do?
Thanks.That hotfix applies to XPSP2. Is that what you've installed? If so,
you should probably upgrade to SP3, which includes a later version
of that and many other msvc files. If you're not using XP, then
that's not the solution.
Noel -
Not a developer but need help with runtime error, please
Hi, I have downloaded a game called Fishdom, but it will not open. I get a " The application has requested the Runtime to terminate it in an unusual way" error message. The dialog box is labeled "Microsoft Visual C++ Runtime Library".
I checked my programs and I have C++ '05, '08, and 2010. I am using XP SP3. I don't get this error at any other time.
I have asked Playrix (game distributor) about it and they seem relatively clueless about how to fix it. So, is there anything I can do to fix this error, or bypass the error so that the game will load? I've tried deleting and reinstalling the libraries and
that did not help.
Anything you can suggest will be very helpful, because I do want the game and do not want to argue with them about refunding my money for it.Hi CatsinQ,
Thank you posting in MSDN forum.
According to your description, could you please tell us when you installed the
Microsoft Visual C++ Runtime Library if there have any install errors?
If you can install the Microsoft Visual C++ Runtime Library successfully, I think that the issue is more related to the game. Therefore, I suggest you can ask the issue to Playrix
(game distributor), maybe it will better help you.
In addition, since the
Visual Studio General
Forum which discuss Visual Studio the VS IDE issue, so I suggest you can try Brian’s suggestion.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey. -
Installing Elements 11 on Mac. Need help with install error "Setup wants to make changes."
Installing Elements 11 on Mac 10.8.2. Need help with install error: Setup wants to make changes. Type your password to allow this." After entering Adobe password, nothing happens. Locked from further installation. Any ideas? Adobe phone support could not help.
Just before letting changes (installation in this case) be made on the system, Mac OS prompts for password & this has to be the Mac system password. This password prompt is the system's own native prompt & would accept the system password only. Please make sure it is the right system password (all/admin rights) and the installaion should run.
-
Need help correcting message error number
Hello, i need help correcting message number for running archiving test runs.
05.08.2011 08:31:42 Message number 999999 reached. Log is full BL 252 E
05.08.2011 08:31:42 Job cancelled after system exception ERROR_MESSAGE 00 564 A
Any help wopuld be appreciated.
Regards.Summary
Symptom
One or several database tables of the application log contain too many entries.
The following database tables belong to the application log:
- BALHDR (all releases)
- BALHDRP(< 4.6C)
- BALM (< 4.6C)
- BALMP (< 4.6C)
- BALC (< 4.6C)
- BALDAT (>= 4.6C)
- BAL_INDX (all releases)
Other terms
RSSLG200,
RSSLGK90,
SLG2,
application log,
log
delete,
performance
Reason and Prerequisites
The application log is a tool to collect, save and display logs.
Many different applications collect messages in the application log which contain information or messages for the end user. The application automatically log serves as a temporary storage for messages. The logs are written on the database but they are not automatically deleted.
There is no general procedure for switching the application log on or off. Some applications provide this option or they offer the option of reducing the number of entries created. (See Notes 91519, 183960, 141244).
The expiration date of application logs
A log usually has an expiration date, which is set by the application, that calls the 'Application log' tool. If the application log does not set an expiration date, the 'Application log' tool sets the expiration date as 12/31/2098 or 12/31/9999,depending on the release, which allows the logs to stay in the system for as long as possible. The end user cannot set the expiration date. The expiration date does not mean that logs which have reached that date will automatically be deleted. It is used to control the deletion of logs when you call the Deletion report. The DEL_BEFORE flag in the BALHDR table determines whether or not the log can be deleted even before the expiration date is reached.
DEL_BEFORE= SPACE means that the log can be deleted before the expiration date is reached. (Default value)
DEL_BEFORE='X' means that the log can only be deleted after the expiration date.
Solution
Deleting the logs of the application log.
Releases >= 4.6A:
=====================================================================
In Releases >= 4.6A, use Transaction SLG2.
On the selection screen you can restrict the amount of logs to be deleted:
The 'Object' and 'Subobject' fields specify the application area in which the logs were written (see F4 Help).
The 'External Identification' field specifies the number which was provided for this log by the application.
o If you also want to delete logs which have not reached the expiration date you must set the option "Also logs which can be deleted before the expiration date".
Select 'Help with application' in Transaction SLG2 for further explanation of the procedure for deleting.
SLG2 is a report transaction. The corresponding report is SBAL_DELETE. At regular intervals, this can be scheduled as a background job.
Releases < 4.6A:
=====================================================================
For Releases < 4.6A, note the following instructions:
In general, the deletion of application logs can be carried out in two steps:
1. Report RSSLG200: Deletion of all logs which expired:
Use report RSSLG200 to delete all logs whose expiration date is reached or exceeded. (This report is not yet available in the standard in Release 3.0F. In this case, the report can be installed in advance; see corrections attached to this note).
As of Release 3.1H, Report RSSLG210 is also available. This report allows the definition of a job that runs regularly and deletes such logs.
2. Report RSSLGK90: Deleting all logs for which a deletion is allowed before expiration:
Sometimes, step 1 does not delete enough logs. The reason for this might be that the expiration date of the logs is too far in the future or that no expiration date has been defined at all (in this case, depending
on the release, the assumed expiration date is 12/31/2098 or 12/31/9999)
Use report RSSLGK90 for these logs.
When you execute this report, you can restrict the logs to be deleted in a selection screen:
The fields 'Object' and 'Subobject' specify the application area which wrote the logs (see F4 help).
The field 'External number' indicates the number which was assigned by the application for this log.
Field 'Log class' indicates the importance of the log.
NOTE: By default, this field contains the value '4', this means only logs with additional information. If you want to delete all logs, enter the value '1' in this field. All logs with log class '1' or higher will then be deleted.
The fields 'To date' and 'Until time' refer to the creation date of a log.
If you enter 12/31/1998 and 23:59:59, you get all logs created in and before 1998
NOTES:
Client-dependency:
Note that the application log tables are client-dependent. Therefore, you must delete data in each client.
Which applications create entires in the application log:
To determine which applications create the logs, look in Table BALHDR to see which objects the logs were created for ( Transaction SE16, Table BALHDR, Field OBJECT). You can find the text description for the object in Table BALOBJT. The application is usually derived from the name and text of the object. The log is displayed in Transaction SL61. The display is restricted to certain objects, among other things.
Database error:
If very many data exists on the DB, Report RSSLGK90 might cause problems. In this case, implement Note 138715.
In very rare cases a dump is created even after Note 138715 was implemented:
ABAP/4 runtime error DBIF_RSQL_SQL_ERROR
SQL error 1555 occurred accessing table "BALHDR "
Database error text...: "ORA-01555: snapshot too old
If you cannot correct the error by means of database utilities, Note 368700 provides a way to bypass this error.
Report RSSLG200 can also run into problems. In this case, use the correction for Report RSSLG200 attached to this Note.
Expiration date in Report RSSLGK90:
There are logs on the database which may only be deleted explicitly after the expiration date (flag DEL_BEFORE = 'X' in table BALHDR). These logs are not deleted in advance by report RSSLGK90. Since, however, this flag is used very rarely, you can ignore this data.
Restriction of the quantity of log data by the application:
To avoid large quantities of logs from different applications, also refer to the following notes:
- 91519
- 183960
- 141244
Archiving logs:
As of Release 6.20, it has been possible to archive logs.
The logs are archived via archiving object BC_SBAL.
The archiving programs are started via Transaction SARA (archive administration).
Via Support Packages, the archiving of application logs has been made available for Releases 4.6C (SAPKB46C27), 4.6D (SAPKB46D17), and 6.10 (SAPKB61011) as well.
Header Data
Release Status: Released for Customer
Released on: 04.08.2005 13:55:45
Master Language: German
Priority: Recommendations/additional info
Category: Consulting
Primary Component: BC-SRV-BAL Basis Application Log
Affected Releases
Software
Component Release From
Release To
Release And
subsequent
SAP_APPL 30 30F 31I
SAP_APPL 40 40A 40B
SAP_APPL 45 45A 45B
SAP_BASIS 46 46A 46D X
SAP_BASIS 60 610 640 X
Corrections Instructions
Correction
Instruction Valid
from Valid
to Software
Component Last
Modifcation
158903 30F 30F SAP_APPL 16.05.2000 07:13:08
162069 31H 45B SAP_APPL 16.05.2000 07:16:07
Related Notes
1009281 - LAW: Runtime error CONNE_IMPORT_WRONG_COMP_TYPE
856006 - Mass processing saves unnecessary logs
737696 - Add. info on upgrade to SAP R/3 Enterprise 4.70 Ext. 2 SR1
706478 - Preventing Basis tables from increasing considerably
637683 - Add info about upgrade to SAP R/3 Enterprise Core 4.70 Ext 2
587896 - Add. info on upgrade to SAP R/3 Enterprise Core 4.70 SR1
540019 - Report RJBTPRLO does not work correctly
400687 - Delete application log: DBIF_RSQL_INVALID_CURSOR
390062 - Additional information about upgrading to 4.6C SR2
370601 - Composite SAP note: APO 3.0 and 3.1 performance
365602 - M/AM: Sales agent determination log - perf.
327285 - Additions to upgrade to 4.6C SR1
183960 - ALE: Deactivating application logs for data transfers
141244 - Deactivating the application log during data transfer
138715 - RSSLGK90: Too many lock entries in the database
118314 - Installing the interface to a separate EH&S
91519 - Deleting logs of the application log
Print Selected Notes (PDF)
Attributes
Attribute Value
Transaction codes BALC
Transaction codes BALM
Transaction codes CLEAR
Transaction codes HIER
Transaction codes SARA
Transaction codes -
I need help getting my program to run a different java program through the command prompt using the runtime.exec() method. This is my code so far:
import javax.swing.JOptionPane;
import javax.swing.JDialog;
import javax.swing.JButton;
import javax.swing.JRadioButton;
import javax.swing.ButtonGroup;
import javax.swing.JLabel;
import javax.swing.ImageIcon;
import javax.swing.BoxLayout;
import javax.swing.Box;
import javax.swing.BorderFactory;
import javax.swing.border.Border;
import javax.swing.JTabbedPane;
import javax.swing.JPanel;
import javax.swing.JFrame;
import java.io.*;
import java.awt.*;
import java.awt.event.*;
import java.*;
//import java.Original.*;
//import java.Turtle.*;
//import jav.Turtle.galapagos.*;
public class JavaMenu extends JPanel
JFrame frame;
JLabel label;
JButton select;
String labDescription = "Java labs created in class.";
String turtleDescription = "Turtle labs created in class";
String creationDescription = "Java programs created on my own.";
public JavaMenu(JFrame frame)
super(new BorderLayout());
JPanel lab = labDialog();
//JPanel turtle = turtleDialog();
//JPanel creation = creationDialog();
label = new JLabel("Click Select Program to run the program.", JLabel.CENTER);
this.frame = frame;
Border padding = BorderFactory.createEmptyBorder(20,20,5,20);
lab.setBorder(padding);
//turtle.setBorder(padding);
//creation.setBorder(padding);
JTabbedPane tab = new JTabbedPane();
tab.addTab("Java Labs", null, lab, labDescription);
//tab.addTab("Turtle Labs", null, turtle, turtleDescription);
//tab.addTab("Java Programs", null, creation, creationDescription);
add(tab, BorderLayout.CENTER);
add(label, BorderLayout.PAGE_END);
label.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
void setLabel(String newText)
label.setText(newText);
protected static ImageIcon createImageIcon(String path)
java.net.URL imgURL = JavaMenu.class.getResource(path);
if (imgURL != null) {
return new ImageIcon(imgURL);
} else {
System.err.println("Couldn't find file: " + path);
return null;
private JPanel labDialog()
final int numButtons = 25;
JRadioButton[] javalabs = new JRadioButton[numButtons];
final ButtonGroup group = new ButtonGroup();
select = null;
final String messageCommand2 = "Lab 02";
final String messageCommand3 = "Lab 03";
final String messageCommand4 = "Lab 04";
final String messageCommand41 = "Lab 04 Extra Credit 1";
final String messageCommand42 = "Lab 04 Extra Credit 2";
final String messageCommand5 = "Lab 05";
final String messageCommand51 = "Lab 05 Extra Credit";
final String messageCommand6 = "Lab 06";
final String messageCommand6b = "Lab 06";
final String messageCommand7 = "Lab 07";
final String messageCommand71 = "Lab 07 Extra Credit";
final String messageCommand8 = "Lab 08";
final String messageCommand8b = "Lab 08";
final String messageCommand81 = "Lab 08 Extra Credit";
final String messageCommand9 = "Lab 09";
final String messageCommand9b = "Lab 09";
final String messageCommand91 = "Lab 09 Extra Credit 1";
final String messageCommand92 = "Lab 09 Extra Credit 2";
final String messageCommand93 = "Lab 09 Extra Credit 3";
final String messageCommand9a = "Lab 09 American Flag";
final String messageCommand9t = "Lab 09 Texas Flag";
final String messageCommand0 = "Lab 10";
final String messageCommand0b = "Lab 10 Hi Lo Game";
final String messageCommand01 = "Lab 10 Extra Credit 1";
final String messageCommand02 = "Lab 10 Extra Credit 2";
javalabs[0] = new JRadioButton("Lab 02 100 Point Version");
javalabs[0].setActionCommand(messageCommand2);
javalabs[1] = new JRadioButton("Lab 03 100 Point Version");
javalabs[1].setActionCommand(messageCommand3);
javalabs[2] = new JRadioButton("Lab 04 100 Point Version");
javalabs[2].setActionCommand(messageCommand4);
javalabs[3] = new JRadioButton("Lab 04 Extra Credit 1");
javalabs[3].setActionCommand(messageCommand41);
javalabs[4] = new JRadioButton("Lab 04 Extra Credit 2");
javalabs[4].setActionCommand(messageCommand42);
javalabs[5] = new JRadioButton("Lab 05 100 Point Version");
javalabs[5].setActionCommand(messageCommand5);
javalabs[6] = new JRadioButton("Lab 05 Extra Credit");
javalabs[6].setActionCommand(messageCommand51);
javalabs[7] = new JRadioButton("Lab 06A 100 Point Version");
javalabs[7].setActionCommand(messageCommand6);
javalabs[8] = new JRadioButton("Lab 06B 100 Point Version");
javalabs[8].setActionCommand(messageCommand6b);
javalabs[9] = new JRadioButton("Lab 07 100 Point Version");
javalabs[9].setActionCommand(messageCommand7);
javalabs[10] = new JRadioButton("Lab 07 Extra Credit");
javalabs[10].setActionCommand(messageCommand71);
javalabs[11] = new JRadioButton("Lab 08A 100 Point Version");
javalabs[11].setActionCommand(messageCommand8);
javalabs[12] = new JRadioButton("Lab 08B 100 Point Version");
javalabs[12].setActionCommand(messageCommand8b);
javalabs[13] = new JRadioButton("Lab 08 Extra Credit");
javalabs[13].setActionCommand(messageCommand81);
javalabs[14] = new JRadioButton("Lab 09A 100 Point Version");
javalabs[14].setActionCommand(messageCommand9);
javalabs[15] = new JRadioButton("Lab 09B 100 Point Version");
javalabs[15].setActionCommand(messageCommand9b);
javalabs[16] = new JRadioButton("Lab 09 Texas Flag");
javalabs[16].setActionCommand(messageCommand9t);
javalabs[17] = new JRadioButton("Lab 09 American Flag");
javalabs[17].setActionCommand(messageCommand9a);
javalabs[18] = new JRadioButton("Lab 09 Extra Credit 1");
javalabs[18].setActionCommand(messageCommand91);
javalabs[19] = new JRadioButton("Lab 09 Extra Credit 2");
javalabs[19].setActionCommand(messageCommand92);
javalabs[20] = new JRadioButton("Lab 09 Extra Credit 3");
javalabs[20].setActionCommand(messageCommand93);
javalabs[21] = new JRadioButton("Lab 10 A 100 Point Version");
javalabs[21].setActionCommand(messageCommand0);
javalabs[22] = new JRadioButton("Lab 10 B 100 Point Version");
javalabs[22].setActionCommand(messageCommand0b);
javalabs[23] = new JRadioButton("Lab 10 Extra Credit 1");
javalabs[23].setActionCommand(messageCommand01);
javalabs[24] = new JRadioButton("Lab 10 Extra Credit 2");
javalabs[24].setActionCommand(messageCommand02);
for (int k = 0; k < numButtons; k++)
group.add(javalabs[k]);
javalabs[0].setSelected(true);
select = new JButton("Select Program");
select.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent e)
String command = group.getSelection().getActionCommand();
if (command == messageCommand2)
int confirm = JOptionPane.showConfirmDialog(frame, "You are about to run the program, o.k.?", "Confirmation", JOptionPane.YES_NO_OPTION, JOptionPane.WARNING_MESSAGE);
if (confirm == JOptionPane.YES_OPTION)
try
Runtime.getRuntime().exec(new String[] {"cmd", "set classpath=D:/Documents and Settings/Yinon Michaeli/My Documents/CS/java/Labs02", "path C:/j2sdk1.4.0/bin", "java Lab020"});
//File file = new File("java/Labs02");
//Runtime.getRuntime().exec(new String[] {"rundll32", "url.dll,FileProtocolHandler","file:///" + file.getAbsolutePath()});
catch (Exception a)
JOptionPane.showMessageDialog(frame, "Error: Exception.", "Error", JOptionPane.ERROR_MESSAGE);
setLabel("Awesome!");
else if(confirm == JOptionPane.NO_OPTION)
setLabel("You've got to be kidding!");
if (command == messageCommand3)
int confirm = JOptionPane.showConfirmDialog(frame, "You are about to run the program, o.k.?", "Confirmation", JOptionPane.YES_NO_OPTION, JOptionPane.WARNING_MESSAGE);
if (confirm == JOptionPane.YES_OPTION)
setLabel("Awesome!");
else if(confirm == JOptionPane.NO_OPTION)
setLabel("You've got to be kidding!");
if (command == messageCommand4)
int confirm = JOptionPane.showConfirmDialog(frame, "You are about to run the program, o.k.?", "Confirmation", JOptionPane.YES_NO_OPTION, JOptionPane.WARNING_MESSAGE);
if (confirm == JOptionPane.YES_OPTION)
setLabel("Awesome!");
else if(confirm == JOptionPane.NO_OPTION)
setLabel("You've got to be kidding!");
if (command == messageCommand41)
int confirm = JOptionPane.showConfirmDialog(frame, "You are about to run the program, o.k.?", "Confirmation", JOptionPane.YES_NO_OPTION, JOptionPane.WARNING_MESSAGE);
if (confirm == JOptionPane.YES_OPTION)
setLabel("Awesome!");
else if(confirm == JOptionPane.NO_OPTION)
setLabel("You've got to be kidding!");
if (command == messageCommand42)
int confirm = JOptionPane.showConfirmDialog(frame, "You are about to run the program, o.k.?", "Confirmation", JOptionPane.YES_NO_OPTION, JOptionPane.WARNING_MESSAGE);
if (confirm == JOptionPane.YES_OPTION)
setLabel("Awesome!");
else if(confirm == JOptionPane.NO_OPTION)
setLabel("You've got to be kidding!");
if (command == messageCommand5)
int confirm = JOptionPane.showConfirmDialog(frame, "You are about to run the program, o.k.?", "Confirmation", JOptionPane.YES_NO_OPTION, JOptionPane.WARNING_MESSAGE);
if (confirm == JOptionPane.YES_OPTION)
setLabel("Awesome!");
else if(confirm == JOptionPane.NO_OPTION)
setLabel("You've got to be kidding!");
if (command == messageCommand51)
int confirm = JOptionPane.showConfirmDialog(frame, "You are about to run the program, o.k.?", "Confirmation", JOptionPane.YES_NO_OPTION, JOptionPane.WARNING_MESSAGE);
if (confirm == JOptionPane.YES_OPTION)
setLabel("Awesome!");
else if(confirm == JOptionPane.NO_OPTION)
setLabel("You've got to be kidding!");
if (command == messageCommand6)
int confirm = JOptionPane.showConfirmDialog(frame, "You are about to run the program, o.k.?", "Confirmation", JOptionPane.YES_NO_OPTION, JOptionPane.WARNING_MESSAGE);
if (confirm == JOptionPane.YES_OPTION)
setLabel("Awesome!");
else if(confirm == JOptionPane.NO_OPTION)
setLabel("You've got to be kidding!");
if (command == messageCommand6b)
int confirm = JOptionPane.showConfirmDialog(frame, "You are about to run the program, o.k.?", "Confirmation", JOptionPane.YES_NO_OPTION, JOptionPane.WARNING_MESSAGE);
if (confirm == JOptionPane.YES_OPTION)
setLabel("Awesome!");
else if(confirm == JOptionPane.NO_OPTION)
setLabel("You've got to be kidding!");
if (command == messageCommand7)
int confirm = JOptionPane.showConfirmDialog(frame, "You are about to run the program, o.k.?", "Confirmation", JOptionPane.YES_NO_OPTION, JOptionPane.WARNING_MESSAGE);
if (confirm == JOptionPane.YES_OPTION)
setLabel("Awesome!");
else if(confirm == JOptionPane.NO_OPTION)
setLabel("You've got to be kidding!");
if (command == messageCommand71)
int confirm = JOptionPane.showConfirmDialog(frame, "You are about to run the program, o.k.?", "Confirmation", JOptionPane.YES_NO_OPTION, JOptionPane.WARNING_MESSAGE);
if (confirm == JOptionPane.YES_OPTION)
setLabel("Awesome!");
else if(confirm == JOptionPane.NO_OPTION)
setLabel("You've got to be kidding!");
if (command == messageCommand8)
int confirm = JOptionPane.showConfirmDialog(frame, "You are about to run the program, o.k.?", "Confirmation", JOptionPane.YES_NO_OPTION, JOptionPane.WARNING_MESSAGE);
if (confirm == JOptionPane.YES_OPTION)
setLabel("Awesome!");
else if(confirm == JOptionPane.NO_OPTION)
setLabel("You've got to be kidding!");
if (command == messageCommand8b)
int confirm = JOptionPane.showConfirmDialog(frame, "You are about to run the program, o.k.?", "Confirmation", JOptionPane.YES_NO_OPTION, JOptionPane.WARNING_MESSAGE);
if (confirm == JOptionPane.YES_OPTION)
setLabel("Awesome!");
else if(confirm == JOptionPane.NO_OPTION)
setLabel("You've got to be kidding!");
if (command == messageCommand81)
int confirm = JOptionPane.showConfirmDialog(frame, "You are about to run the program, o.k.?", "Confirmation", JOptionPane.YES_NO_OPTION, JOptionPane.WARNING_MESSAGE);
if (confirm == JOptionPane.YES_OPTION)
setLabel("Awesome!");
else if(confirm == JOptionPane.NO_OPTION)
setLabel("You've got to be kidding!");
if (command == messageCommand9)
int confirm = JOptionPane.showConfirmDialog(frame, "You are about to run the program, o.k.?", "Confirmation", JOptionPane.YES_NO_OPTION, JOptionPane.WARNING_MESSAGE);
if (confirm == JOptionPane.YES_OPTION)
setLabel("Awesome!");
else if(confirm == JOptionPane.NO_OPTION)
setLabel("You've got to be kidding!");
if (command == messageCommand91)
int confirm = JOptionPane.showConfirmDialog(frame, "You are about to run the program, o.k.?", "Confirmation", JOptionPane.YES_NO_OPTION, JOptionPane.WARNING_MESSAGE);
if (confirm == JOptionPane.YES_OPTION)
setLabel("Awesome!");
else if(confirm == JOptionPane.NO_OPTION)
setLabel("You've got to be kidding!");
if (command == messageCommand9t)
int confirm = JOptionPane.showConfirmDialog(frame, "You are about to run the program, o.k.?", "Confirmation", JOptionPane.YES_NO_OPTION, JOptionPane.WARNING_MESSAGE);
if (confirm == JOptionPane.YES_OPTION)
setLabel("Awesome!");
else if(confirm == JOptionPane.NO_OPTION)
setLabel("You've got to be kidding!");
if (command == messageCommand9a)
int confirm = JOptionPane.showConfirmDialog(frame, "You are about to run the program, o.k.?", "Confirmation", JOptionPane.YES_NO_OPTION, JOptionPane.WARNING_MESSAGE);
if (confirm == JOptionPane.YES_OPTION)
setLabel("Awesome!");
else if(confirm == JOptionPane.NO_OPTION)
setLabel("You've got to be kidding!");
if (command == messageCommand9b)
int confirm = JOptionPane.showConfirmDialog(frame, "You are about to run the program, o.k.?", "Confirmation", JOptionPane.YES_NO_OPTION, JOptionPane.WARNING_MESSAGE);
if (confirm == JOptionPane.YES_OPTION)
setLabel("Awesome!");
else if(confirm == JOptionPane.NO_OPTION)
setLabel("You've got to be kidding!");
if (command == messageCommand92)
int confirm = JOptionPane.showConfirmDialog(frame, "You are about to run the program, o.k.?", "Confirmation", JOptionPane.YES_NO_OPTION, JOptionPane.WARNING_MESSAGE);
if (confirm == JOptionPane.YES_OPTION)
setLabel("Awesome!");
else if(confirm == JOptionPane.NO_OPTION)
setLabel("You've got to be kidding!");
if (command == messageCommand93)
int confirm = JOptionPane.showConfirmDialog(frame, "You are about to run the program, o.k.?", "Confirmation", JOptionPane.YES_NO_OPTION, JOptionPane.WARNING_MESSAGE);
if (confirm == JOptionPane.YES_OPTION)
setLabel("Awesome!");
else if(confirm == JOptionPane.NO_OPTION)
setLabel("You've got to be kidding!");
if (command == messageCommand0)
int confirm = JOptionPane.showConfirmDialog(frame, "You are about to run the program, o.k.?", "Confirmation", JOptionPane.YES_NO_OPTION, JOptionPane.WARNING_MESSAGE);
if (confirm == JOptionPane.YES_OPTION)
setLabel("Awesome!");
else if(confirm == JOptionPane.NO_OPTION)
setLabel("You've got to be kidding!");
if (command == messageCommand0b)
int confirm = JOptionPane.showConfirmDialog(frame, "You are about to run the program, o.k.?", "Confirmation", JOptionPane.YES_NO_OPTION, JOptionPane.WARNING_MESSAGE);
if (confirm == JOptionPane.YES_OPTION)
setLabel("Awesome!");
else if(confirm == JOptionPane.NO_OPTION)
setLabel("You've got to be kidding!");
if (command == messageCommand01)
int confirm = JOptionPane.showConfirmDialog(frame, "You are about to run the program, o.k.?", "Confirmation", JOptionPane.YES_NO_OPTION, JOptionPane.WARNING_MESSAGE);
if (confirm == JOptionPane.YES_OPTION)
setLabel("Awesome!");
else if(confirm == JOptionPane.NO_OPTION)
setLabel("You've got to be kidding!");
if (command == messageCommand02)
int confirm = JOptionPane.showConfirmDialog(frame, "You are about to run the program, o.k.?", "Confirmation", JOptionPane.YES_NO_OPTION, JOptionPane.WARNING_MESSAGE);
if (confirm == JOptionPane.YES_OPTION)
setLabel("Awesome!");
else if(confirm == JOptionPane.NO_OPTION)
setLabel("You've got to be kidding!");
return;
return create2ColPane(labDescription + ":", javalabs, select);
private JPanel createPane(String description, JRadioButton[] radioButtons, JButton showButton)
int numChoices = radioButtons.length;
JPanel box = new JPanel();
JLabel label = new JLabel(description);
box.setLayout(new BoxLayout(box, BoxLayout.PAGE_AXIS));
box.add(label);
for (int k = 0; k < numChoices; k++)
box.add(radioButtons[k]);
JPanel pane = new JPanel(new BorderLayout());
pane.add(box, BorderLayout.PAGE_START);
pane.add(showButton, BorderLayout.PAGE_END);
return pane;
private JPanel create2ColPane(String description, JRadioButton[] radioButtons, JButton showButton)
JLabel label = new JLabel(description);
int numPerColumn = radioButtons.length/2;
JPanel grid = new JPanel(new GridLayout(0, 2));
for (int k = 0; k < numPerColumn; k++)
grid.add(radioButtons[k]);
grid.add(radioButtons[k + numPerColumn]);
JPanel box = new JPanel();
box.setLayout(new BoxLayout(box, BoxLayout.PAGE_AXIS));
box.add(label);
grid.setAlignmentX(0.0f);
box.add(grid);
JPanel pane = new JPanel(new BorderLayout());
pane.add(box, BorderLayout.PAGE_START);
pane.add(showButton, BorderLayout.PAGE_END);
return pane;
private static void createAndShowGUI()
JFrame.setDefaultLookAndFeelDecorated(true);
JFrame frame = new JFrame("Java Programs");
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
JavaMenu newContentPane = new JavaMenu(frame);
newContentPane.setOpaque(true);
frame.setContentPane(newContentPane);
frame.pack();
frame.setVisible(true);
public static void main(String[] args)
javax.swing.SwingUtilities.invokeLater(new Runnable() {
public void run() {
createAndShowGUI();
}Why are you posting hundreds of lines of code not related to the problem??? 99.9% of the code you posted has absolutely nothing to do with using the Runtime.exec() method.
Create a simple test program that simply tries to invoke the Runtime.exec() method. Once you get that working, then you incoporate it into you real program. Don't clutter the forum with unnecessary code.
public class WindowsFileProtocolHandler
public static void main(String[] args)
throws Exception
String[] cmd = new String[4];
cmd[0] = "cmd.exe";
cmd[1] = "/C";
cmd[2] = "java";
cmd[3] = "YourClassHere";
Process process = Runtime.getRuntime().exec( cmd );
} -
TS3694 I need help to fix error message -69
I am having problem with syncing my ipod classic (160gb). I have this error message -69, that I need help with. I have already restored my ipod, but cannot add my anything (audiobooks-my music) to my ipod.
see if you have any friend have a Mac computer, do a restore there before syncing with your PC
-
Need Help!! Errors during Local Client Copy
Doing a Local Client Copy and getting these error messages in the log:
Table Name Component Package
/1CN/CMFSAPH0FOR DDIC Error (See SE14)
/1CN/CMFSAPH1FDT DDIC Error (See SE14)
/1CN/CMFSAPH1FFX DDIC Error (See SE14)
/1CN/CMFSAPH2TGR DDIC Error (See SE14)
/1CN/CMFSAPH2TRM DDIC Error (See SE14)
/1CN/CMFSAPH3TCT DDIC Error (See SE14)
/1CN/CMFSAPH3TUS DDIC Error (See SE14)
/1CN/CMFSAPH4TFX DDIC Error (See SE14)
/1CN/CMFSAPH4TQU DDIC Error (See SE14)
Then I go to SE14 then put the name of the tables then click CHECK >> DATABASE OBJECT and then as the result I get:
"Table is not created in the database"
If I go down to the database level and look within the Oracle database dba_tables the tables and objects exists within the database but SAP is unable to recognize them. All objects were imported with a Oracle Data Pump dump file and now I just need help in getting SAP to recognize the tables.
Edited by: Adam Gendle on Feb 19, 2010 12:29 AMHi,
Its showing inconsistency between ABAP Dictionary and the database.
Have you run Test-Run before performing actual client copy ?
Please check the Consistency of affected Tables.
SE11 -> Display Table -> Utilities -> Database Object -> Check
(check DB Object as well as Run time Object)
Please refer this [SAP Note 686357 - Table pool length incorrect after Unicode conversion|https://service.sap.com/sap/support/notes/686357] to get more information. The relevant solution is mentioned there if the pool tables having inconsistency with VARDATA field.
Also refer SAP Note 1171306 - Error with pooled tables when copying a client.
Regards,
Bhavik G. Shroff -
Need help asap with Error #2109!
Need major help in an error that is driving me crazy! I have a movie clip button, however, once you click on it the output will say:
ArgumentError: Error #2109: Frame label instance15 not found in scene Scene 1.
at flash.display::MovieClip/gotoAndStop()
at index_fla::MainTimeline/goLabel()
i am new in flash and trying to learn as3. i've looked at what error this is but i cant get my head around it. what i m trying to do it if you click on a button, a swf file will load on the the page. but it is not loading and the error comes up!
my code is:
function goLabel(e:MouseEvent):void
gotoAndStop(e.target.name);
if anyone knows how to solve this problem please help! let me know if i need any other codes, but this should be it!
thanks. i am about to go bald.Do you have a frame on your timeline that is labeled as "instance15"?
The code you show will do nothing in the way of loading an swf.... gotoAndStop is a timeline command, not a file loading command. -
F4 help throws runtime error CREATE_DATA_UNKNOWN_TYPE in IC webclient
Hi All
I am facing runtime error while clicking on f4 help in IC webclient.
<crmic:inputField id = "IfAddPartnerId"
width = "100%"
maxlength = "12"
value = "//Partner/PARTNER_ID_ADD"
helpId = "CRM_VENDOR_NUMBER"
helpInputFields = "IfAddPartnerId=VENDOR_NUMBER;\'<%=
AdminI->GET_GUID( attribute_path = '' ) %>\'=GUID;\'<%=
AdminI->GET_ORDERED_PROD( attribute_path = '' ) %>\'=ORDERED_PROD"
helpOutputFields = "IfAddPartnerId=VENDOR_NUMBER"
disabled = "<%= lv_add_disabled %>"
tooltip = "<%= otr(crm_ic_appl/bupaaccount) %>" />
I can see in debugging that control is going to search help FM : CRM_VENDOR_NUMBER_SHLP_EXIT
Search help id is : CRM_VENDOR_NUMBER.
Exception CREATE_DATA_UNKNOWN_TYPE is being thrown in the SET_TABLE_VALUES method of the class : CL_CRM_IC_F4_HELP (line 18) . I feel that GV_VIEWNAME is not initialized till this point.
Can anybody please help me to remove the error.
Best Regards
BhavishyaHi,
Please let me know the BBPCRM package level.
Feel free to revert back.
--Ragu -
Need help determining compiling error
Good morning,
I need help finding the cause of a compiling error I receive. I have reviewed my code numerous times without any luck. I hope you guys might see something I am not! The entire file exceeds the limit I can post, so I am attaching it in 2 posts. Sorry for the inconvenience. The error and my code are posted below. Thank you for your help!
C:\StockTrackerDB.java:382: cannot find symbol
symbol : method add(java.lang.Boolean)
location: class java.util.ArrayList<java.lang.String>
aList.add(new Boolean(rs.getBoolean("admin")));
^
1 error
Tool completed with exit code 1
import java.io.*;
import java.sql.*;
import java.util.*;
public class StockTrackerDB
private Connection con = null;
//Constructor; makes database connection
public StockTrackerDB() throws ClassNotFoundException,SQLException
if(con == null)
String url = "jdbc:odbc:StockTracker";
try
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
catch(ClassNotFoundException ex)
throw new ClassNotFoundException(ex.getMessage() +
"\nCannot locate sun.jdbc.odbc.JdbcOdbcDriver");
try
con = DriverManager.getConnection(url);
catch(SQLException ex)
throw new SQLException(ex.getMessage()+
"\nCannot open database connection for "+url);
// Close makes database connection; null reference to connection
public void close() throws SQLException,IOException,ClassNotFoundException
con.close();
con = null;
// Method to serialize object to byte array
private byte[] serializeObj(Object obj) throws IOException
ByteArrayOutputStream baOStream = new ByteArrayOutputStream();
ObjectOutputStream objOStream = new ObjectOutputStream(baOStream);
objOStream.writeObject(obj); // object must be Serializable
objOStream.flush();
objOStream.close();
return baOStream.toByteArray(); // returns stream as byte array
// Method to deserialize bytes from a byte array into an object
private Object deserializeObj(byte[] buf) throws IOException, ClassNotFoundException
Object obj = null;
if(buf != null)
ObjectInputStream objIStream = new ObjectInputStream(new ByteArrayInputStream(buf));
obj = objIStream.readObject(); //IOException, ClassNotFoundException
return obj;
// Methods for adding a record to a table
// add to the Stocks Table
public void addStock(String stockSymbol, String stockDesc) throws SQLException, IOException, ClassNotFoundException
Statement stmt = con.createStatement();
stmt.executeUpdate("INSERT INTO Stocks VALUES ('"
+stockSymbol+"'"
+",'"+stockDesc+"')");
stmt.close();
// add to the Users table
public boolean addUser(User user) throws SQLException,IOException,ClassNotFoundException
boolean result = false;
String dbUserID;
String dbLastName;
String dbFirstName;
Password dbPswd;
boolean isAdmin;
dbUserID = user.getUserID();
if(getUser(dbUserID) == null)
dbLastName = user.getLastName();
dbFirstName = user.getFirstName();
Password pswd = user.getPassword();
isAdmin = user.isAdmin();
PreparedStatement pStmt = con.prepareStatement("INSERT INTO Users VALUES (?,?,?,?,?)");
pStmt.setString(1, dbUserID);
pStmt.setString(2, dbLastName);
pStmt.setString(3, dbFirstName);
pStmt.setBytes(4, serializeObj(pswd));
pStmt.setBoolean(5, isAdmin);
pStmt.executeUpdate();
pStmt.close();
result = true;
else
throw new IOException("User exists - cannot add.");
return result;
// add to the UserStocks table
public void addUserStocks(String userID, String stockSymbol)
throws SQLException,IOException,ClassNotFoundException
Statement stmt = con.createStatement();
stmt.executeUpdate("INSERT INTO UserStocks VALUES ('"
+userID+"'"
+",'"+stockSymbol+"')");
stmt.close();
// Methods for updating a record in a table
// updating the Users table
public boolean updUser(User user) throws SQLException, IOException, ClassNotFoundException
boolean result = false;
String dbUserID;
String dbLastName;
String dbFirstName;
Password dbPswd;
boolean isAdmin;
dbUserID = user.getUserID();
if(getUser(dbUserID) != null)
dbLastName = user.getLastName();
dbFirstName = user.getFirstName();
Password pswd = user.getPassword();
isAdmin = user.isAdmin();
PreparedStatement pStmt = con.prepareStatement("UPDATE Users SET lastName = ?," + " firstName = ?, pswd = ?, admin = ? WHERE userID = ?");
pStmt.setString(1, dbLastName);
pStmt.setString(2, dbFirstName);
pStmt.setBytes(3, serializeObj(pswd));
pStmt.setBoolean(4, isAdmin);
pStmt.setString(5, dbUserID);
pStmt.executeUpdate();
pStmt.close();
result = true;
else
throw new IOException("User does not exist - cannot update.");
return result;
}// Methods for deleting a record from a table
// delete a record from the Stocks table
private void delStock(String stockSymbol) throws SQLException,IOException,ClassNotFoundException
Statement stmt = con.createStatement();
stmt.executeUpdate("DELETE FROM Stocks WHERE "
+"symbol = '"+stockSymbol+"'");
stmt.close();
// delete a record from the Users table
public void delUser(User user) throws SQLException,IOException,ClassNotFoundException
String dbUserID;
String stockSymbol;
Statement stmt = con.createStatement();
try
con.setAutoCommit(false);
dbUserID = user.getUserID();
if(getUser(dbUserID) != null) // verify user exists in database
ResultSet rs1 = stmt.executeQuery("SELECT userID, symbol "
+"FROM UserStocks WHERE userID = '"+dbUserID+"'");
while(rs1.next())
try
stockSymbol = rs1.getString("symbol");
delUserStocks(dbUserID, stockSymbol);
catch(SQLException ex)
throw new SQLException("Deletion of user stock holding failed: " +ex.getMessage());
} // end of loop thru UserStocks
try
{ // holdings deleted, now delete user
stmt.executeUpdate("DELETE FROM Users WHERE "
+"userID = '"+dbUserID+"'");
catch(SQLException ex)
throw new SQLException("User deletion failed: "+ex.getMessage());
else
throw new IOException("User not found in database - cannot delete.");
try
con.commit();
catch(SQLException ex)
throw new SQLException("Transaction commit failed: "+ex.getMessage());
catch (SQLException ex)
try
con.rollback();
catch (SQLException sqx)
throw new SQLException("Transaction failed then rollback failed: " +sqx.getMessage());
// Transaction failed, was rolled back
throw new SQLException("Transaction failed; was rolled back: " +ex.getMessage());
stmt.close();
// delete a record from the UserStocks table
public void delUserStocks(String userID, String stockSymbol) throws SQLException,IOException,ClassNotFoundException
Statement stmt = con.createStatement();
ResultSet rs;
stmt.executeUpdate("DELETE FROM UserStocks WHERE "
+"userID = '"+userID+"'"
+"AND symbol = '"+stockSymbol+"'");
rs = stmt.executeQuery("SELECT symbol FROM UserStocks "
+"WHERE symbol = '"+stockSymbol+"'");
if(!rs.next()) // no users have this stock
delStock(stockSymbol);
stmt.close();
// Methods for listing record data from a table
// Ordered by:
// methods that obtain individual field(s),
// methods that obtain a complete record, and
// methods that obtain multiple records
// Methods to access one or more individual fields
// get a stock description from the Stocks table
public String getStockDesc(String stockSymbol) throws SQLException, IOException, ClassNotFoundException
Statement stmt = con.createStatement();
String stockDesc = null;
ResultSet rs = stmt.executeQuery("SELECT symbol, name FROM Stocks "
+"WHERE symbol = '"+stockSymbol+"'");
if(rs.next())
stockDesc = rs.getString("name");
rs.close();
stmt.close();
return stockDesc;
// Methods to access a complete record
// get User data from the Users table
public User getUser(String userID) throws SQLException,IOException,ClassNotFoundException
Statement stmt = con.createStatement();
String dbUserID;
String dbLastName;
String dbFirstName;
Password dbPswd;
boolean isAdmin;
byte[] buf = null;
User user = null;
ResultSet rs = stmt.executeQuery("SELECT * FROM Users WHERE userID = '" +userID+"'");
if(rs.next())
dbUserID = rs.getString("userID");
dbLastName = rs.getString("lastName");
dbFirstName = rs.getString("firstName");
// Do NOT use with JDK 1.2.2 using JDBC-ODBC bridge as
// SQL NULL data value is not handled correctly.
buf = rs.getBytes("pswd");
dbPswd=(Password)deserializeObj(buf);
isAdmin = rs.getBoolean("admin");
user = new User(dbUserID,dbFirstName,dbLastName,dbPswd,isAdmin);
rs.close();
stmt.close();
return user; // User object created for userID
// Methods to access a list of records
// get a list of selected fields for all records from the Users Table
public ArrayList listUsers() throws SQLException,IOException,ClassNotFoundException
ArrayList<String> aList = new ArrayList<String>();
Statement stmt = con.createStatement();
ResultSet rs = stmt.executeQuery("SELECT userID, firstName, lastName, admin "
+"FROM Users ORDER BY userID");
while(rs.next())
aList.add(rs.getString("userID"));
aList.add(rs.getString("firstName"));
aList.add(rs.getString("lastName"));
aList.add(new Boolean(rs.getBoolean("admin")));
rs.close();
stmt.close();
return aList;
// get all fields in all records for a given user from the UserStocks table
public ArrayList listUserStocks(String userID) throws SQLException, IOException, ClassNotFoundException
ArrayList<String> aList = new ArrayList<String>();
Statement stmt = con.createStatement();
ResultSet rs = stmt.executeQuery("SELECT * FROM UserStocks "
+"WHERE userID = '"+userID+"' ORDER BY symbol");
while(rs.next())
aList.add(rs.getString("symbol"));
rs.close();
stmt.close();
return aList;
} -
Hello, im using this class to query a table from my database. everything is ok, but when i write the closing } of the Main class the Program gives an error. In the main class ive wrote here at the bottom, the main class has no ending } . Now only the final } gives an error but everything else is ok, ive double checked all brackets, they are all in good place, what is going wrong?
package DBandQueryHandler;
import java.sql.Connection;
import java.sql.DriverManager;
import java.sql.ResultSet;
import java.sql.SQLException;
import java.sql.Statement;
class Main {
public static void main(String[] args){
Class driver_class=null;
try{
driver_class=Class.forName("com.mysql.jdbc.Driver"); }
catch(ClassNotFoundException e){
e.printStackTrace();
return;
System.out.println("Found Driver"+ driver_class);
Connection connection=null;
try{
connection= DriverManager.getConnection("jdbc:mysql://localhost:3306/....", ".....", "........");
catch(SQLException e){
e.printStackTrace();
return;
try{
System.out.println("Established connection to"+ connection.getMetaData().getURL());
catch(SQLException e1){
e1.printStackTrace();
Statement statement=null;
try{
statement= connection.createStatement();
statement.execute("SELECT * FROM KLANTEN");
Resultset resset= statement.getResultSet();
System.out.println("Row user_id, username, password, abbonement1, abbonement2, openstaand");
while(resset.next()){
System.out.println(resset.getRow());
System.out.println("" + resset.getSring("user_id"));
System.out.println("" + resset.getSring("username"));
System.out.println("" + resset.getSring("password"));
System.out.println("" + resset.getSring("abbonement1"));
System.out.println("" + resset.getSring("abbonement2"));
System.out.println("" + resset.getSring("openstaand"));
resset.close();
catch(SQLException e){
e.printStackTrace();
finally{
if(statement=null){
try{
statement.close();
catch(SQLException e){
e.printStackTrace();
if(connection=null){
try{
connection.close();
catch(SQLException e){
e.printStackTrace();
}javaboy2 wrote:
Like i said, when i write all brackets correctly, the program gives errors, but when i delete the the last bracket, the program doesnt give errors(except for the last bracket=> '}' expected). I dont understand this.
The errors of the program with correct amount of brackets are these: Yes, the errors come up with correct brackets because you have errors . When you take out the bracket, the structure is too bad so it doesn't look for the rest of the errors. This problem has absolutely nothing to do with brackets at all. That's why you needed to post the errors in your first post, rather than ignoring them and pretending your code is perfect and blaming it on brackets.
And these errors would be fixed if you read them.
Cannot find symbol ResultsetThat's because there is no class called Resultset. It's called ResultSet.
Your if statements are using assignment instead of equality
statement=null; //that assigns null to the statement object
statement==null; //that checks to see if statement equals nullAgain, read your errors. They don't lie. -
Need help with itunes error message
I am running itunes on a pc with windows xp. I am getting the following error message:
Runtime Error!
Program:C:/Program Files/Itunes/Itunes.exe
This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information.
Does anyone know how to correct error or contact the support team?
ThanksReally? My iPad is just dropping out and leaving iTunes frozen on 'stage 4 of 4' then I get a time out message. Apparently it hasn't sync'd since 1 November.
-
Help! Runtime error after Lightroom 1.1 install!
I installed v1.1 on a Win XP machine and now when I try to launch Lightroom I get only a message box:
"Microsoft Visual C++ Runtime Library"
"Runtime error!
"Program: ...Files\Adobe\Adobe Photoshop Lightroom 1.1\lightroom.exe
"This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information."
I tried going back to a previous Windows restore point, but Lightroom 1.0 wouldn't run from there either!
What do I do?I had LR 1.0 working fine on my XP Pro machine - then I had a HD crash. On installing new & larger HD's (I had backups of all data/photos, etc) I set aside 1 of the new 500GB HD's just for photos and another drive just for my photo software applications.
I installed LR 1.1 this morning and received the runtime error.
A call to tech support and about 15 minutes of excellent Adobe support service solved the problem.
I had my .LRCAT file on the Photo HD and not in the My Pictures folder on my C:\ where it was looking for it.
The solution involved starting LR 1.1 and holding the Ctrl key down (I did mention it's a windows machine) This brought up a prompt panel that let me direct LR 1.1 to where the .LRCAT was located.
Problem Solved! Adobe support (I think the technicians name was Dave) worked just the way you would expect it to and my day became a lot brighter.
Art Guertin
Maybe you are looking for
-
Hello, I have an application running crystal reports XI using the Report Design component and the ActiveX viewer to display the report, everything works great on a virtual machine, now I am moving everything to a different machine and is not working
-
Download doesn't work with Safari
Just a tip if you happen to be using Mac OS. It appears that the License Agreement page doesn't work using Safari. Works fine with Camino, though. Blake Meike
-
Hi all, It's an ECC- XI - MDM scenario using XI 7.1 The scenario has been configured using MATMAS Idoc. MATMAS is imported into the namespace ECCtoMDM. It has also been included as an External Definition. In fact in Message Mapping, the source is the
-
Convert NOT IN to NOT EXISTS if possible
Hi, I have this query which is returning the correct results SELECT hdr.order_num ,hdr.business_unit_id ,dtl.item_class_id FROM xxx.dd_ddhdr hdr ,xxx.dd_dddtl dtl WHERE hdr.order_num =
-
Line Drawing best file format for import in InDesign
i was wondering what is the accepted and recommended file format for files to be imported in InDesign. I was under the impression that AI files should be saved as EPS but I just read an article that says that Adobe's Dov Isaacs said that eps will b