Need Help in SAP Multiple UOM
Dear Expert ,
Please provide solution for this scenario .as follows
One of my customer need dual inventory system for the same item . And the condition are below
* Granites Manufacturing company
* They want to maintain serial number for individual slap wise ( all the slap not equal length * Height * width )
* Invoice should be in CBM (Cubic Meters ) only ( 1590.34 * 10000)
With the above condition if we maintain the inventory UOM is CBM then we can't able enter serial number. For example ...
Example-1
Item - A Serial Numbered Item and UOM in CBM
Now i am going to add Good receipt (test scenario) for Item - A ,qty 1590.34 CBM while adding the document it will show "Cannot select serial numbers; fractional quantity exists in row 1" like this error. so we can't able to maintain serial number
Example - 2
the same item we are maintaining the UOM as "nos" there is no problem with serial number . But while booking the invoice we can't able to book per CBM or SF (squre meter ) UOM it should be number only. same case we can't able to calculate the price according to the CBM .
""If u need any additional information let me know""
Please provide any solution for the process.
Thank you
Sudhir.J
Hi Sudhir,
Let me restate what I think your question is to see if I have the right understanding. Your customer manufactures slabs of granite and they would like to be able to identify each slab individually, and to be able to transact in terms of Cubic Meters and/or Sqare Meters and/or "NOS" (I assume that means "numbers" or "units"?). This is complicated by the fact that each slab has different dimensions. Is that basically it? If so it sounds like a perfect opportunity to use batch specific UOMs. With that functionality you can set up each slab as a batch and then define batch specific UOMs for each batch to account for the different dimensions.
Here is an article that I think does a good job of explaining how the functionality works:
Batch Specific UOM Inventory Management: Stock Keeping with Dynamic Conversion Factor http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a021e088-3428-2d10-799d-a69349248f10?quicklink=index&overridelayout=true
I hope this helps.
Dave
Similar Messages
-
Need help in creating multiple signature forms?
need help in creating multiple signature forms that can be digitally signed in adobe reader
Automator gets a bit unweildy when trying to vary things outside of what the actions provide. Since you are already using an AppeScript in your workflow, might as well do the whole thing:
set baseFolder to (path to desktop) -- the location to create the folder
display dialog "Please provide a new folder name:" default answer "test"
set folderName to text returned of the result
repeat -- keep repeating until a number is returned
display dialog "How many subfolders?" default answer "5"
set theNumber to text returned of the result
try -- test the result
set theNumber to theNumber as integer
exit repeat -- success
end try
end repeat
tell application "Finder"
try -- make new folder
set newFolder to (make new folder at baseFolder with properties {name:folderName})
on error number -48 -- skip errors if the folder is already there
set newFolder to ((baseFolder as text) & folderName) as alias
end try
repeat with X from 1 to theNumber
try -- make new subfolder
make new folder at newFolder with properties {name:folderName & X}
on error number -48 -- skip errors if the folder is already there
end try
end repeat
end tell -
Need help Setting up Multiple Static Ip , 1 for each port of the fios router
Need help Setting up multiple Static Ip on my fios router
I have been trying to figure out how to set up multiple ip in my fios router.
However I kind of managed how to set up multiple static ip However the way I want it is for each port of my router to have an external ip signed to it. ( like 4 different modem in 1 )
Verizon gave me 5 static ip but they can not help me how to set it up.
Have anyone here done more then one static ip on different ports? I assume that the process will be the after the second static ip.You want to set up Static Nat. You will not assign the IP to a port, but rather to a local machine. Figure out what machines you want your IP's to go to. Under the firewall section you will see static nat. Pick the machine you want and enter one of the IP's you were assigned.
-
Hi i am new to this forum, i need help with SAP SD module. Can you please provide me pointers or links to get started SAP SD module and start facing the interviews.
Hi Aditya,
For understanding the SD module itself, the link - http://help.sap.com/saphelp_erp2005/helpdata/en/8c/df293581dc1f79e10000009b38f889/frameset.htm is the ultimate one.
Again you can also refer to the mateial "Implementing R/3 S&D BY GLYNN C.WILLIAMS".
For Cracking interview, You can refer to "SAP SD Interview Questions, Answers, and Explanations By: Jim Stewart" which is available in the market.
Regards,
SARTHAK -
Need Help For Sap Insurance Presentation
Dear Friends,
I am a Technical person and i want to give a Presentation on 'SAP Insurance - Collection and Disbursements '.I have gone through Sap help for SAP Insurance but am not getting what should be my material for Presentation. Being A technical person not able to understand WHAT SHOULD BE THE CONTENTS OF PRESENTATION i:e should it be more of Technical or Functional.
Please help me and Guide me for the Contents from a Functional Point of view, as i will be giving presentation to My Seniors.
Thanks and Regards,
AshwiniI do not understand presentation in terms of collection and disbursement you mean from the business side of things or will i say looking at it from a business analyst perspective. I have some info if you can send an email add then i will send something which might be helpful though i am not sure, I myself i am just moving into such area as a SAP Business Analyst for Claims managment though i have an insurance background of another ERP so i might be able to help.
-
Need help on SAP SSO with SAML & SSO2
Dear expert,
We met an SSO issue on launchpad.
Here is our scenario and SSO structure. We use fiori launchpad to display all SAP apps.
1. When an user visit launchpad URL, URL will redirect user to identity provider (IDP) for SAML authentication.
2. Then IDP authenticate with SAML2.0 token back to gateway.
3. Gateway accept the SAML2.0 token and issue SSO2 logon ticket.
4. Use logon ticket to backend ABAP ERP system for transaction apps.
5. Use logon ticket to HANA system for factsheet.
Now the first step above is OK as SAML token can be authenticated back to gateway. But after that, the basic form authentication pop-up for user credential on both backend system and HANA, which should not. We found out that launchpad was stucked with error message "/sap/es/ina/GetServerInfo HTTP/1.1 401 Unauthorized" at ERP backend service "GetServerInfo". By checking the cookies, we found out that after SAML token accepted by gateway, gateway did not issue any MYSAPSSO2 ticket.
However, when we disabled SAML and use form authentication for launchpad, SSO2 logon ticket works perfectly among GW, ERP and HANA. So, there should be no issue configuration regarding SSO2 logon ticket in SAP GUI.
here is the system information:
GW: NW740 SP5
ERP: ECC6 on NW740 SP5
HANA: v70
Please kindly help us out on this issue. Please ask if other information is needed. thanks.
Best regards,
Xian' anThis discussion thread belongs to the SAP Gateway space. For generic SSO related queries where portal is not involved the correct space is SAP NetWeaver Application Server. This space is for NetWeaver Single Sign-On (NWSSO, the separately purchasable product) topics only.
-
Need help on SAP BW regarding IS-Retail Aspects
Dear Gurus
I am urgently need of SAP BW implementation documents based on SAP IS-Retail. pls help me, it's really urgent
Thanks and Regards
[email protected]Hello Ramesh
Please check this link
http://help.sap.com/saphelp_nw04/helpdata/en/86/39d6386e24f90ae10000000a114084/content.htm
Hope this will give some inputs
Thanks
Chandran -
Noob needs help with hosting multiple sites
Hello I am new to this multi hosting. I have looked on the forum for answers but haven't found any. I am trying to figure out how to host multiple sites. I have my dns working for my default site "example1.com", but need to know if I need to add another dns record for my second site. "example2.com". Also when I point to the new fold that has the second site in it and I assign it port 82 for testing purposes I get an error message saying 403 access forbidden. I need to find out how get permission to view the site for the public. Its in a separate folder on an external hard drive right now for testing purposes. Can any body help me or point me in the right direction? Thanks so much!!!
-Kcam1999{quote}
While what you are telling him is technically functional, it is not correct
I beg to differ, Paul. You are the one that is not correct.
CNAMES have been deprecated as of some years ago
What? huh? really?
Please show me any official document that states this (and not someone who just started a rumor because he didn't understand them). Indeed, the DNS RFC makes no such claim.
{quote}
I stand very much corrected. CNAMEs are not officially deprecated. Interestingly, your post cites precisely what happens when CNAMES used carelessly. How many transactions are needed to resolve Apple's CNAME chain below? RFC1912 (http://www.faqs.org/rfcs/rfc1912.html) has some recommendations that suggests Apple's own network folks have, like me and perhaps even others here, some learning to do. Is that a 'best practice?'
{quote}> Then make sure you tell Apple since this site depends on the use of CNAMEs:
dig discussions.apple.com
discussions.apple.com. 492 IN CNAME discussions.apple.com.edgesuite.net.
discussions.apple.com.edgesuite.net. 4427 IN CNAME a1399.b.akamai.net.
a1399.b.akamai.net. 2 IN A 128.241.220.82
a1399.b.akamai.net. 2 IN A 128.241.220.72
In fact, it uses TWO CNAMES in a chain. Oh my.{quote}
From RFC1912 (which I'm sure many have now read here), section 2.4 is as follows:
{quote}... having chained records such as CNAMEs pointing to CNAMEs may
make administration issues easier, but is known to tickle bugs in
some resolvers that fail to check loops correctly. As a result some
hosts may not be able to resolve such names.{quote}
{quote}> It is not valid to say "don't use these because they could cause problems'. A records can be just as problematic, as can PTRs. Let's not even talk about MX.{quote}
How, exactly, does is an A record problematic? No chains, no additional lookups, no wasted cycles...
We differ here -- and if we are dealing with a newbie, we don't need to enter into unnecessary complexity UNTIL it is a requirement for their solutions.
{quote}> There are many valid reasons to use CNAMEs in DNS, not least of which is the ease of moving a service if it uses CNAMEs. For example, if you have 10 A records all pointing at the same server and you want to migrate to a different machine you have to locate and update all 10 records. If they used a CNAME to the physical server you could move them all at once using a single change. This is especially important in cross-domain links where you may not control all the origin zone files.
{quote}
You're somewhat reaching here, and it is well beyond the scope of the OP's post or needs (well, until they tell us more about their needs, I suppose). There is nothing difficult about 'finding' and updating the necessary records. The final example you gave is a good one and I'll say THAT is an appropriate use of a CNAME, 'though there are other workarounds for it.
Thanks for keeping me honest. -
Need help in displaying multiple attachments in a OAF Page
Hi,
I need to display attachemts of requisition line in a OAF Page(Notification Detials Page)and the attachments can be more than one.My custom VO returns it as a single string like url1, url2.. etc.
I need to show them as seperate links.
I tried using the Item Style as LINK.But it is not working.It is prefixing the server url before the View Attribute and creating a single link.
Any help in this regard will be appreciated.Thanks in advance.
SriniHi skeerthi,
If you are using the core attachments table (FND_ATTACHED_DOCUMENTS and the like), you can have a look on the Developer's Guide on chapter 4: Implementing Specific UI Features, section "Attachments", there is a seeded region available for displaying multiple attachments.
If you are not, then i'd recommend refactoring :D... Just kidding, it would be nice to use the core feature, but if the table is custom, and the links are stored separated by commas, you will have to write controller code to implement that. That can be done by:
1) Creating an Application module method that uses StringTokenizer to tokenize the attribute String (use getViewObject().getCurrentRow().getAttribute() to get the comma-separated value) and return that to the controller
2) In the controller, receive the StringTokenizer and for each token, use the api createWebBean() to create an OALinkBean and add it to a layout region using addIndexedChild() api.
This way you will dinamically create a Link for each attachment. If your layout region is, for example, tableLayout, you can create a rowLayout for each token, then create a Link, add the link to the row layout and finally add it to the tableLayout. By doing so, you will create a table-style attachment region.
Hope it Helps
Thiago -
Hi,
We have installed SAP Biller Direct application on J2EE 620 engine integrated with SAP R/3 4.7 Enterprise (WAS 620). For user management security we will use ABAP stack.
The link of this Biller Direct Application will be provided on company's web portal (not SAP Ent. Portal). Once user click on link , Biller Direct application will open it another browser window.User must create their own user id and password.Other information will also be asked like Last Name ,first name, etc) during user id and password creation. Basically user will create their own user master record. (just think of it as you are creating an email account in Yahoo portal connected to R/3)
My question is :-
1) What configuration I need to do on J2EE and R/3 side so that user record will be created in R/3 when user creates it's own ID and password?
2)If I want to link LDAP with R/3, how I can link the LDAP with R/3 (user mapping ) will it be automatic, once the user creates it user id in web portal? OR do i have manually synch LDAP and R/3
I will appreciate your response
ThanksI do not understand presentation in terms of collection and disbursement you mean from the business side of things or will i say looking at it from a business analyst perspective. I have some info if you can send an email add then i will send something which might be helpful though i am not sure, I myself i am just moving into such area as a SAP Business Analyst for Claims managment though i have an insurance background of another ERP so i might be able to help.
-
Hi Guys,
I am a new member to SAP XI and wanted to get some help in designing some application in SAP XI.
My Scenario:
I will get a list of IDs in file. I need to send only some of IDs to destination. I know what all IDs need to be sent. So, based on this, i have created a "FIXED VALUES" in value mapping and have assigned 'Y' to the IDs.
SO based on that, i am maintaining a flag in destination sturcture and in BPM, if the xpath value of the flag is Y, send it to destination.
This is perfectly working when there is only one ID. But if one account number has more than one IDs, my scenario is not working.
So, wanted to do modifications to my XI scenario. Please suggest some options to make it work.
I have tried following options, but i could not make it run.
1) In Value mapping, i tried using split by value, removecontexts and explored different node functions, but could not run.
I am not sure what i need to change in BPM to make it run.
Please help me in this regard.
Regards,
SAP_XI User.Hi,
Your scenario is Split message .. you can avoid BPM if you are in SP14 with the RB_Split functionality.
if you running less than Sp14 try out this scenario with Multimapping and use in the BPM.
check also this weblog
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
Shree -
Need Help on Joining multiple tables in Golden Gate
Hi,
Can you please help me with some examples on joining multiple tables in Golden Gate. i.e, my requirement is to Join Table 1 & Table 2 in Source and Load it in Target with 10 fields from Table 1 & 5 fields from Table 2 based on the join condition between Table 1.key = Table2.key
I have been trying to do that using SQLEXEC command in Golden Gate. But, is there a way I can do this in the Extract parameter file?
Thanks for your time
Regards
SureshHi,
Thanks a lot for the prompt reply. I am able to do that for the below scenario
Source.T1.Field1
Source.T1.Field2
Source.T2.Field1
Source.T2.Field2
Target Table
T1.Field1, T1.Field2, T2.Field1, T2.Field2.
But, if I already have T2.Field1 in T1 table, then T1.Field1 takes the precendence and getting loaded. i.e., I wanted to join the table 1 & Table 2 and based on the matching condition, I will need to populate the data either from T1 or T2.
Hope you got my requirement.
Below the Data Dump file & Replicat File.
EXTRACT dpump
USERID ********, PASSWORD ********
RMTHOST *******, MGRPORT 7809
RMTTRAIL /oracle/gg/dirdat/rt
--PASSTHRU
TABLE TABLE1,
SQLEXEC (ID LOOKUP,
QUERY "SELECT FIELD1 FROM SOURCE.TABLE2 WHERE FIELD1 = :v_field1",
PARAMS ( v_field1 = field1 )),
TOKENS (tk_field_1 = @GETVAL (lookup.field1));
Replicat file
REPLICAT repjoin
ASSUMETARGETDEFS
HANDLECOLLISIONS
USERID *******, PASSWORD ********
MAP SOURCE.T1, TARGET TARGET.GG_TABLE_T1,
COLMAP ( USEDEFAULTS ,
field1 = @token ("tk_party_id"));
I eventually wanted to join like below.
select t1.field1, t1.field2, t2.field1 from t1, t2
where t1.field1 = t2.field1;
Thanks for your time again
Regards
Suresh -
hello,
i need the IMG steps for PD. Please somebody help me.
I request for Configuration docs from any company in india.coz i want to know what exactly happening in the real time environment.
regards,
ushareddy
[email protected]Hi,
These links will be of great help to you:
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAPA/PAPA.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PE/PE.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAESS/ESSIAC.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAMA/PAMA.pdf
Hope this helps,
Reward points appreciated,
Thank You, -
Hi,
We are in process of evaluating SAP APO for one of our subsidiaries which is into computer AMC business.
I undersatand that SAP APO has a service part management module and i need some clarity on certain functionality aspects of the product, for example
- Does SAP APO manage alternate part list?
- Does it compute reorder level for spares and also can it provide ROL for multiple plant location
- Does it compute ROL considering the Alternate Parts Availability?
- Does the system consider spares reparability factor while planning for spares?
- Does the spares planning logic modeled on consumption of spares or on some other logic?
We are currently on SAP R/3 ECC 6.0.
Standard MM & SD modules are used for the subsidiary in discussion.
FI is also used but posting is done only for few cases as it is under control of corporate Finance.
Thanking in advance for the responses.
Regards,
HRSHi
I am also intrested to know about this. One of our client wants to implement SPP. At present they are in ECC 6.0.
Can any please share the information on SPP.
Now if they want to enter in to SCM system what are the other modules they have to implement along with SPP?
Thanks in advance
Vijaya -
Need help in recording multiple seperate tracks
hello, i've used cool edit and now audition to record for the last eight years or so. however, i've never gone byond tracking more then one mic at a time in the past. with some upcoming projects i will be tracking a full band and need to record multiple mics (most challenging being drums) and i need to be able to assign each mic to its own seperate track in real time.
i will be using a PreSonus firebox which was four inputs. i can make do with four mics just fine. my only problem is i can't find any info and i'm not even sure audition allows for simultaneous multi channel recording. it is imperative i be able to have separation for each mic for mixing. any advice/help? will i be forced to find another program?
thanks in advance,
joelAudition handles multitrack recording just fine.
You don't say what version of Audition you have (there are variations in how to set up the recording) but if you're on the current 3.0 version, you'd:
Under Edit/Audio Hardware Set up, click on the Multitrack tab at the top. On the "Audio Driver" menu, select the appriopriate Presonus driver. Under "Default Input" Select the Presonus interface. Also select it on the Output menu if you want to outuput sound that way for monitoring. Click Okay.
Go to Multitrack view in the main programme.
Work down the inputs for each track (marked with a right-facing arrow) and select "Mono" and the Presonus output you wish to go to that track. If you want to output back to the Presonus, do the same with the output selection, otherwise just leave it to "Main".
(At this point, I suggest you save a session as "Basic multi setup" or similar to make it faster for the next take--then do a "Save As" for the actual recording you're about to do.)
Click the "R" button on each track you wish to record in (you don't have to do all tracks every time) to arm for record.
Click the main Record button to actually start recording.
If you have an earlier version of Audition or Cool Edit Pro, the procedure is similar but some of the controls are accessed in different ways.
Bob
Maybe you are looking for
-
How can I create a Report from a SWT-Application?
Post Author: mkoch CA Forum: JAVA I'm a Developer and new to Crystal Reports and I have the job to create a Report from a SWT-Application.The report-files ( *.rpt) were created with Crystal Reports 10 or 11.> I'm not sure but I have access to a machi
-
If someone trying to call me on there first attempt they can hear that it's busy even if its not and then on 2nd trial it's fine. How can I fix it.? iPhone 5, iOS 7.0.4
-
Reg:Mapping problem in XI
Dear Friends, My scenario is IDOC to IDOC.When ever sales order is created in ECC 5.0. New purchase order will be created in ECC 6.0. Configuration has been done and the scenario is working fine for single record.Multiple line Items are not being up
-
Call JSP with applet and wait till it is loaded
Hi, I am calling a JSP with a java-script. The targetpage needs some time, until the applet is loaded. I would like to call a function in the applet. My problem is, that I cannot set 'location.href' and straight after that call the applet, because it
-
Sending midi via Motif USB to Logic.
Can someone explain how to set up my Mac,Logic pro 9 & Motif es6 to send midi note messages to Logic? I just need to use my Motif as a midi controller.I downloaded the drivers on my Mac & hopefully it is there! Thanks.