Need help in the order Freezing

Hi SD Friends
One of my sales order needs to be blocked (It has 2 line items). That means user does not need this order anymore.  But they don't want to delete the order physically from database. 
In this case, I have rejected the both line items.  And the entire order status becomes completed.  But the delete option is still active.
Then, I have selected the order reason (Blocking) in the header level. Delete is still active.
I want to prevent this order from this delete option. 
How to freeze the order after rejection of all items?
OR how to disable the delete option in the above scenario.
Please help !!
Regards
Priyan

Thanks Mani S
Do you have any samle code (user exit) for this activity. 
Please share with me !! 
Regards
Priyan

Similar Messages

  • I need to make the ordered quantity field (RV45A-KWMENG) disabled in 'VA02'

    Hi SAP COMMUNITY,
    I have urgent requirement for which i did'nt worked before on this requirement. I hope you people can help me in this regerd.
    My requirement is, I need to make the ordered quantity field (RV45A-KWMENG) disabled in the transaction code is VA01/VA02. User should not be able to edit this ordered quantity in VA01/VA02 Transaction.
    Here the condition to disable this field ordered quantity is IF ORDER TYPE EQUAL TO OR AND IF ITEM CATEGORY EQUAL TO TANN in technical IF VBAK-AUART EQ OR AND IF VBAP-PSTYV EQ TANN then only the field (RV45A-KWMENG) ordered quantity should be disabled in that transaction VA01/VA02.
    Correct me if iam wrong, I think in the program SAPMV45A and do we need to include any screen number which i have seen in VA02 is 4001. Do we need to write a code in Include MV45AFZZ (FORM USEREXIT_FIELD_MODIFICATION.). But i don't know what code i need to write here to disable this field.
    I had searched in the forum some example code so please suggest me whether i can use this and if i can use this please suggest me how to write the condition and insert the code in that FORM. If this sample code is wrong then please suggest me what exact code should be given. Can anyone help. Quick response will be much appreciated.
    Looking forward for ur prompt replies.

    As per my understanding , To disable the field RV45A-KWMENG based on the condition for Transaction VA01/VA02.
    The conditions which i need to check is Order Type and item category.
    I understand that this is the code which i need to insert for disabling the field but i have a question here, where is the condition here and how the system understand for this field RV45A-KWMENG it has to disable. I think we need give the condition as if RV45A-KWMENG....... Another one if iam not wrong we need check that it has to be done in VA01 and VA02 then only this condition should be executed.
    IF VBAK-AUART EQ 'XXX' OR VBAP-PSTYV EQ TANN .
    IF SCREEN-NAME = 'XXX'.
    SCREEN-ACTIVE = 0
    ENDIF.
    ENDIF.
    Please suggest me the better way how can i do it in the coding.
    Awaiting for ur prompt reply.

  • Need help for the $200 promo rebate for trade-in of I Phone 4

    Need help for the $200 promo rebate for trade-in of I Phone 4.  Unable to preregister when I ordered the new 6  in September.  Now can not contact VZW recycle program regarding.

    When I ordered my phone on Sept. 13th in a Verizon store, I had to ask the salesman how I went about getting the $200 rebate. He said shipping materials would come with the new phones. When I received the confirmation e-mail of my order, it contained a link for the rebate. Fortunately I clicked on the link, filled out the form online, and received the packing materials to send my phone in shortly after. My phones came in on Oct. 14th and I sent 3 of them back. So far I have received a gift card for $200 for 2 of the phones; the other is showing not received. I don't know what your situation is, but I think the promotion ended Oct. 15th. If I had listened to the salesman I think I would be out of luck as well. I hope I am wrong for your sake.

  • I need help with the photo stream. Everytime I try to open it on my PC it says photo stream is unable and I have tried everuthing to enable it but it doesn't work. Any help, please?

    I need help with the photo stream. Everytime I try to open it on my PC it says photo stream is unable and I have tried everuthing to enable it but it doesn't work. Any help, please?

    Freezing, or crashing?
    ID on the Mac can produce reports that may (or may not) prove helpful in diagnosing the problem. I suspect this is something not directly related to InDesign, and maybe not to any of the Adobe apps directly since you seem to be having a problem in more than one. That often inidcates a problem at the system level.
    Nevertheless, it won't hurt to try to gather the reports. You'll find driections for how to generate them, and to post them on Pastebin.com (then put a link to them here) so we can see what's going on at Adobe Forums: InDesign CS5.5 Not Responding
    Do you happen to run a font manager? If so, which one, and waht version?

  • I Need Help for the popup message every time I go to safari: "Warning! Old version of Adobe Flash Player detected. Please download new version."???

    I Need Help for the popup message every time I go to safari: "Warning! Old version of Adobe Flash Player detected. Please download new version."???

    If you are talking about Safari on the iPad, there is no version of Adobe Flash for iOS and there never has been. Clear Safari, close the app and reset the iPad.
    Go to Settings>Safari>Clear History and Website Data
    In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
    If you are talking about Safari on your Mac, you are in the wrong forum. But I would still clear the cache, quit Safari and restart the Mac.

  • HT1199 need help installing the os x mountain lion update

    need help installing the os x mountain lion software update

    By default, ML no longer comes with the Java runtime preinstalled. I believe the route to enabling Java if you are going to need it is to run the Java Preferences app found in Utilities. It will inform you of Java's absence and offer to install the latest version and activate it. On subsequent runs, the Preferences app will allow you to fine tune how the runtime operates.
    Note that the new default operation is for the applet plugin to be disabled. You need to enable it as needed and it self-deactivates if unused in awhile. Also important to note that Java comes in both 32 and 64 bit versions and you can set the preferred order. Default is 64-bit but I've had issues with some applets failing to run and have had to switch the order.

  • I just created an iCloud email and I want to use that email for my iTunes account as well. I need help suiting the old apple I'd because I do not remember anything associated with that email and I don't know the security questions

    I just created an iCloud email and I want to use that email for my iTunes account as well. I need help switching the old apple ID because I do not remember anything associated with that email and I don't know the security questions or the login for that old email.

    You cannot do that.  The AppleID you used to create the iCloud account is an active primary email address.  The email address you created with the iCloud account is also an active primary email address (all Apple domain email address automatically become AppleIDs as well).  You cannot replace the primary email address on one active AppleID with the primary email address on another, active AppleID.
    You can use your iCloud email/AppleID with iTunes, but it will be a separate account, so all your previous purchases remain tied to the other AppleID you have.
    I don't understand your statement that you could not remeber your old AppleID password, as you would have had to use it to create the iCloud account in the first place (the first step of creating the iCloud account required you to login with your existing AppleID and password)?

  • Need help with the Vibrance adjustment in Photoshop CC 2014.

    Need help with the Vibrance adjustment in Photoshop CC 2014.
    Anytime I select Vibrance to adjust the color of an image. The whole image turns Pink in the highlights when the slider is moved from "0" to - or + in value.  Can the Vibrance tool be reset to prevent this from happening? When this happens I cn not make adjustments...just turns Pink.
    Thanks,
    GD

    Thank you for your reply. 
    Yes, that does reset to “0” and the Pink does disappear.
    But as soon as I move the slider +1 or -1 or higher the image turns Pink in all of the highlights again, rather than adjusting the overall color.
    GD
    Guy Diehl  web: www.guydiehl.com | email: [email protected]

  • I need help with the iPad Remote app to connect to apple TV 2

    I need help with the iPad Remote app to connect to apple TV 2 I have the app already on my ipad and when I open it only shows my itunes library and not the small black Apple TV 2 icon! How do i fix this and i know it's something 

    Get the manual at http://manuals.info.apple.com/en_US/AppleTV_SetupGuide.pdf
     Cheers, Tom

  • Need help accessing the router web page.  I have been tol...

    Need help accessing the router web page.  I have been told my router is acting like a switch and the IP address is not in the proper range.  I have tried reseting the router (hold for 30 sec and unplug for 5 mins).  Didn't work.
    thanks

    What router are you using?  Almost all Linksys routers use 192.168.1.1 as the default local IP address, but there is at least one that uses 192.168.16.1 , namely the WTR54GS  (not the WRT54GS).
    You need to try again to reset the router to factory defaults.
    To reset your router to factory defaults, use the following procedure:
    1) Power down all computers, the router, and the modem, and unplug them from the wall.
    2) Disconnect all wires from the router.
    3) Power up the router and allow it to fully boot (1-2 minutes).
    4) Press and hold the reset button for 30 seconds, then release it, then let the router reset and reboot (2-3 minutes).
    5) Power down the router.
    6) Connect one computer by wire to port 1 on the router (NOT to the internet port).
    7) Power up the router and allow it to fully boot (1-2 minutes).
    8) Power up the computer (if the computer has a wireless card, make sure it is off).
    9) Try to ping the router. To do this, click the "Start" button > All Programs > Accessories > Command Prompt. A black DOS box will appear. Enter the following: "ping 192.168.1.1" (no quotes), and hit the Enter key. You will see 3 or 4 lines that start either with "Reply from ... " or "Request timed out." If you see "Reply from ...", your computer has found your router.
    10) Open your browser and point it to 192.168.1.1. This will take you to your router's login page. Leave the user name blank (note: a few Linksys routers have a default user name of "admin" (with no quotes)), and in the password field, enter "admin" (with no quotes). This will take you to your router setup page. Note the version number of your firmware (usually listed near upper right corner of screen). Exit your browser.
    If you get this far without problems, try the setup disk (or setup the router manually, if you prefer), and see if you can get your router setup and working.
    If you cannot get "Reply from ..." in step 9 above, your router is dead.
    If you get a reply in step 9, but cannot complete step 10, then either your router is dead or the firmware is corrupt. In this case, use the Linksys tftp.exe program to try to reload your router with the latest firmware. After reloading the firmware, repeat the above procedure starting with step 1.
    If you need additional help, please state your ISP, the make and model of your modem, your router's firmware version, and the results of steps 9 and 10. Also, if you get any error messages, copy them exactly and report back.
    Please let me know how things turn out for you.
    Message Edited by toomanydonuts on 01-21-2008 04:40 AM

  • I need help proving the date tag on a photo stored in my iPhoto is from the date it was sent to my iphone/date it was imported into iphoto - and that it is NOT the date the photo was actually taken.  Please help!

    I need help proving the date tag on a photo stored in my iPhoto is from the date it was sent to my iphone/date it was imported into iphoto - and that it is NOT the date the photo was actually taken.   I recieved a photo via text on my iphone and then I synced my iphone to my macbook and now it is in iphoto.  I already know that the date on the photo per the tag that shows up on it in iphoto is NOT the date the photo was actually taken.  I need article or literature or something confirming the tag is from when it was sent to the iphone and/or when it was imported.  I greatly appreciate some assistance!

    All I am trying to do is find something on a forum board or article etc stating that the the date showing in iphoto could be the date it was imported or synced or sent to me and not the actual date taken.
    The date on the photo could be anything because you can edit the date with iPhoto or any of 100 apps, free and paid for. So, the date on the photo will prove nothing, I'm afraid.
    Regards
    TD

  • Need help with the session state value items.

    I need help with the session state value items.
    Trigger is created (on After delete, insert action) on table A.
    When insert in table B at least one row, then trigger update value to 'Y'
    in table A.
    When delete all rows from a table B,, then trigger update value to 'N'
    in table A.
    In detail report changes are visible, but the trigger replacement value is not set in session value.
    How can I implement this?

    You'll have to create a process which runs after your database update process that does a query and loads the result into your page item.
    For example
    SELECT YN_COLUMN
    FROM My_TABLE
    INTO My_Page_Item
    WHERE Key_value = My_Page_Item_Holding_Key_ValueThe DML process will only return key values after updating, such as an ID primary key updated by a sequence in a trigger.
    If the value is showing in a report, make sure the report refreshes on reload of the page.
    Edited by: Bob37 on Dec 6, 2011 10:36 AM

  • Need help on the below query.

    Hi All,
    I've a query given below..
    SELECT W.WONUM,
         W.STATUS,
         WS.CHANGEDATE,
         EH.OLD_RATE
         FROM
         WORKORDER W,
         WOSTATUS WS,
         ESTIMATE_HEADER@GQMFOF EH
    WHERE WS.CHANGEDATE BETWEEN '01-Oct-2009' AND '1-Nov-2009'
    AND W.WONUM = WS.WONUM
    AND EH.OLD_RATE = 'N'
    AND WS.WOSTATUS = 'CLOSE';
    I would like to get All the data which status =closed in the month of Oct for Old rate,
    So for this i am writing the query above. But not getting the o/p.
    It is giving me that " Table/View doesn't exist.
    There 2 schemas MAXIMO,GQMMGR..
    DBlinks are GQMFOF,MAXFOFNC..
    Can anyone help me while writing the above query...
    Regards,
    gr.

    A question was asked in your other thread. But the problem was you dint care to give an answer.
    Dont open duplicate post.
    I need help on the below problem..

  • Need help regarding the location of Exchange 2013 Logs for parsing

    Hi, I am trying to create reports based on the logs that are created on my exchange server. I am using
    exchange 2013. My problem is that I cannot handle every log, and instead want specific types of logs.
    I need help finding the specific locations of the following types of logs (If they even exist), so that I can parse them and use them effectively:
    Audit Logs (Mailbox logons, Mailbox permission changes, Mailbox property changes,
    Exchange store changes)
    Mail Report Logs (Mailbox size and growth, Mailbox storage growth, Enabled users, Expired and Soon-to-Expire Mailboxes)
    Exchange Traffic Reports (Details on size and amount of messages sent and recieved, Internet traffic [to and from], Traffic between exchange users)
    I understand this might sound like a huge undertaking, but any help that can be provided would be appreciated.
    Again, I need information on the locations of these types of logs on the exchange server, so that I can parse them. Collecting them all and searching through them is not practical for my available resources.
    Thanks,
    Matt

    Audit Logs (Mailbox logons, Mailbox permission
    changes, Mailbox property changes, Exchange
    store changes) ---- these are two type of logs, 1. mailbox audit logs and that is stored in each mailbox under dumpster
    http://technet.microsoft.com/en-us/library/ff461930(v=exchg.150).aspx however you need to
    enable
    it for individual mailboxes... 2. admin audit log, this is stored into a system mailbox dumpster.... http://technet.microsoft.com/en-us/library/dd335052(v=exchg.141).aspx
    Mail Report Logs (Mailbox size and growth, Mailbox
    storage growth, Enabled users, Expired and Soon-to-Expire Mailboxes) ---- there isn't any specific log for this, you would need to create some time of script to collect this every day for you and store it somewhere... This is a good start... http://www.stevieg.org/2011/06/exchange-environment-report/
    Exchange Traffic Reports (Details on size and
    amount of messages sent and recieved, Internet traffic [to and from], Traffic between exchange users) ----- This you can get from message tracking log... http://technet.microsoft.com/en-us/library/bb124375(v=exchg.150).aspx

  • I need help getting the license number for Adobe Photoshop Elements. However, It doesn't recognize me as an authorized user. Can someone help?

    I need help getting the license number for Adobe Photoshop Elements. However, It doesn't recognize me as an authorized user. Can someone help?@

    I am having the same problem...did you ever fix it?

Maybe you are looking for