Need help in the process of trying to downgrade back to iPhoto '09...

I want to see all the exif info for my photos as I am getting into DSLR photography. This is one of the reasons I am trying to downgrade back to iPhoto '09 from '11 amongst other reasons; one being I just preferred it (and I have been using '11 since January and still want to downgrade). Anyway, this is what I have done so far:
Reinstalled iPhoto '09 from an old time machine backup in December '13 from before I upgraded late December. Then with the help of a youtube video I found I created a new iPhoto Library for '09 and was in the process of importing all my pics when 3/4 of the way through, my hard drive reached capacity and the importing quit. When I go into iPhoto '09 now, there are no pics. So I spent yesterday buying a large external hard drive and the past 18 or so hours formatting it for mac and moving files so now I have a bit more room on my internal 1tb hard drive.
So I am guessing I should next go to the newly created iPhoto library on my internal hard drive and delete all (not to mention this will free up more room on it). Then what I want to do is create a new library for iPhoto '09 on my new 3TB external hard drive and then import all the pics there. Can I create the iPhoto Library on an external drive?
If I am able to do the above and import all my pics and iPhoto '09 seems to be working properly, can I then go in and delete the iPhoto '11 app without causing problems? Am I right to believe that all my pictures, even the ones I imported to iPhoto '11 directly from a mail attachment, will not be deleted if I delete the iPhoto '11 app?
I don't want to find myself with 2 iPhoto programs, neither of which function. Thanks in advance!

You need the version of iPhoto that you wan tot use installed and then follow the IPLM directions
http://www.fatcatsoftware.com/iplm/Help/downgrading%20a%20library%20to%20an%20ea rlier%20version%20of%20iphoto.html
Downgrading a library to an earlier version of iPhoto
If you have a library from a newer version of iPhoto that you simply want "downgrade" to an older version of iPhoto, the easiest way to do that is with the "Rebuild Library" command. You will want to be running iPhoto Library Manager on the machine that has the older version of iPhoto you want to convert the library to. This will create a new library and import the entire contents of the original library into the new one using the older version of iPhoto. As with any rebuild, there are some items that will not be included (most notably, hidden photos, books, calendars, and slideshows), but if you have none of these items or don't mind losing them in the downgrading process, then this is a decent option for converting a library to an older version.
LN

Similar Messages

I need help with the processes running a media server.

Hi there!   I need some help with the following log please. The processes listed I am assuming are the current processes being used from my MacBook Pro to the media server? Is that correct? Are these common processes?
Incident Identifier: EC931B64-E141-4C64-B428-427DF014C7E8
CrashReporter Key:   b16be41bf16206d8f231e7e71676ab2a9c4dd25e
Hardware Model:      iPhone4,1
OS Version:          iPhone OS 5.0.1 (9A405)
Kernel Version:      Darwin Kernel Version 11.0.0: Tue Nov 1 20:34:16 PDT 2011; root:xnu-1878.4.46~1/RELEASE_ARM_S5L8940X
Date:                2012-08-24 16:06:18 -0400
Time since snapshot: 152 ms
Free pages:        1195
Wired pages:       88383
Purgeable pages:   0
Largest process:   mediaserverd
Processes
         Name                 UUID                    Count resident pages
             atc <2271ed33ec773eeb9f381bf1baac9dee>     390
       securityd <e31a714c227a3d1c98ef8aacd44d91ee>     243
         assetsd <281396d3e7d831fbb6a5374157663dbc>    1370
      MobileMail <7064f2baf3f23db987bc8ec99855fe53>    1438 (jettisoned)
        mstreamd <cbe9881735043a389e7cdad3b5bcf5ce>    1099 (jettisoned)
          Camera <88291709452932ac9cbd0f1c06902214>    3105 (active)
     dataaccessd <b4f61f117ee635c48329af8572733d30>    1760
     MobilePhone <fe38c6944a053c9187b41ee50aa151b0>    5549
        networkd <6ee7a78e56073f6e8db4c2cc3265fdb4>     170
      aosnotifyd <58089d732ab43bbea0aec4a6f812f446>     320
        BTServer <e03baab8e0103188979ce54b87591065>     261
      aggregated <68a25a1690cb372096543a46abed14d7>     337
            apsd <e4b6e6e4f31e36f79815747ecbf52907>     291
   fairplayd.N94 <2c0105776e393b39ba95edffaf3bdd17>     294
       fseventsd <78af02202422321885dfc85c24534b0e>     170
            iapd <3ee7f82879033b4fb93b9cf1f4ecae29>     366
         imagent <8e2042f2ec9e3af9ba400f031f1bbfa7>     416
   mDNSResponder <b75f43f012ad3d9ea172d37491994e22>     265
    mediaremoted <b9fa7d1381013c2fa90ea134ff905f59>     258
    mediaserverd <478e5e8345c83be5ba1868906813bb75>    6774
             ubd <7eaf0b0ca5b83afabecb0dfaa38c7a19>     389
           wifid <e176ab123beb3000bdb89e020612c1d6>     284
       locationd <91c84ab19dd03e4ab1b4cc30178ab1c0>     831
          powerd <25ddef6b52e4385b819e777dd2eeed3c>     167
       lockdownd <a68aa1526ef13a9bb4426bb71ffc1e3c>     250
      CommCenter <51922c9a50e73fe3badccaa4b1b1123b>     781
         syslogd <dd3766bcb1213e91b66283635db09773>     107
     SpringBoard <7506c20d86da3f1dbe9bf38f8bda253d>    5673 (active)
         configd <3430c0025ed13f56800a329b7254d2ae>     418
         notifyd <3793fabace3a385687b3c29c1fa1fcac>     252
UserEventAgent <6e1cabc1ec6d372c90a6bdeaa7b258fa>     433
         launchd <cc35dd7a872334319ed028e6bbeae081>     133
**End**
Thanks a bunch!!!

COULD NOT OF BEEN BOUGHT BRANDNEW IN 2011** apologies

Migrating from Red Brick database to Oracle 11g -Need help with the process

Hi,
I am on this new project were we are migrating from IBM Red Brick Data Warehouse to Oracle 11g. We have a very tight time line. I was hoping if any of you have done this migration before and are willing to share their experience. Any help would be greatly appreciated. I would like to get a brief idea about how to go about the process.
Thanks in advance!

Hello,
that is a matter of supply and demand, and as the demand to migrate Red Brick to Oracle RDBMS is very low, Oracle never included Red Brick into the migration tools.
If you search in the forums for Red Brick, you will not find much more than this one from the year 2006:
Re: Migration from rebrick 6.0.3 to Oracle 9i
Options:
In general we have the following options:
1. Oracle Migration Workbench
2. SQL Developer Migration Workbench
3. Generic Connectivity
4. SQL*Loader
Regarding your dedicated foreign database, option 1 and 2 fail as those tools
do not work against Red Brick DB.
Generic Connectivity would be an option if you have an ODBC driver to this database.
In this dedicated case, you can then set up generic connectivity (= a database
link to the foreign database using odbc).
The Oracle database we support generic connectivity can reside on Windows,
Solaris, HP-UX, AIX and Linux.
If the Oracle database is on any other platform, you might migrate to a
database on this platform, then export the migrated DB and then load it into
the real target db.
Generic Connectivity will allow you to perform a SQL*Plus copy of tables; this
means you can create tables like they are defined in your source and transfer
the data to the Oracle db; but no procedures, triggers or anything coded can be
transferred.
Last option (4) is that you generate "flat files". This means ASCII-SPOOL
Files and then import them using SQL*Loader. As far as I know there is no
existing SQL*Loader sample file for Red Brick databases exports and you need to
write them on your own.
I recommend to read also the following note in My Oracle Support:
Note 233876.1: Options for Connecting to Foreign Data Stores and Non-Oracle Databases
Best regards
Wolfgang

I have a problem with linking media. I need help with the process

I can't seem to locate the media off my external or dropbox. I have the project file opened it's just offline and won't let me go back to locate it.

You need to ask in the forum for the program you are using
This forum is about the Cloud as a delivery process, not about using individual programs
If you start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

I am in the process of trying to transfer my iTunes library from one computer to another. Some of the music/film info has been edited (by me) in my library (using get info). When put onto new computer the info has gone back to before i edited it.. Help!?

I am in the process of trying to transfer my iTunes library from one computer to another. Some of the music/film info has been edited (by me) in my library (using get info). When put onto new computer (following apple's instructions- using an external hard drive) the info has gone back to how it was before i edited it.. Help!?

Hello,
I would recommend taking a look at the article below for more information about migrating your iTunes library.
iTunes for Windows: Moving your iTunes Media folder
http://support.apple.com/kb/ht1364
-Griff W.

I need help with the photo stream. Everytime I try to open it on my PC it says photo stream is unable and I have tried everuthing to enable it but it doesn't work. Any help, please?

I need help with the photo stream. Everytime I try to open it on my PC it says photo stream is unable and I have tried everuthing to enable it but it doesn't work. Any help, please?

Freezing, or crashing?
ID on the Mac can produce reports that may (or may not) prove helpful in diagnosing the problem. I suspect this is something not directly related to InDesign, and maybe not to any of the Adobe apps directly since you seem to be having a problem in more than one. That often inidcates a problem at the system level.
Nevertheless, it won't hurt to try to gather the reports. You'll find driections for how to generate them, and to post them on Pastebin.com (then put a link to them here) so we can see what's going on at Adobe Forums: InDesign CS5.5 Not Responding
Do you happen to run a font manager? If so, which one, and waht version?

When trying to install Aid Virtual Instruments I get a warning no mountable file systems. I need help fixing the problem.

When trying to install Pro Tools 10.3.3 Aid Virtual Instruments I get a warning no mountable file systems. I need help fixing the problem.

Thanks Linc for responding to my post. I searched a little further and found I was missing a file. Once I downloaded the fix, I was able to install the software from the original download.

Need help accessing the router web page. I have been tol...

Need help accessing the router web page. I have been told my router is acting like a switch and the IP address is not in the proper range. I have tried reseting the router (hold for 30 sec and unplug for 5 mins). Didn't work.
thanks

What router are you using? Almost all Linksys routers use 192.168.1.1 as the default local IP address, but there is at least one that uses 192.168.16.1 , namely the WTR54GS (not the WRT54GS).
You need to try again to reset the router to factory defaults.
To reset your router to factory defaults, use the following procedure:
1) Power down all computers, the router, and the modem, and unplug them from the wall.
2) Disconnect all wires from the router.
3) Power up the router and allow it to fully boot (1-2 minutes).
4) Press and hold the reset button for 30 seconds, then release it, then let the router reset and reboot (2-3 minutes).
5) Power down the router.
6) Connect one computer by wire to port 1 on the router (NOT to the internet port).
7) Power up the router and allow it to fully boot (1-2 minutes).
8) Power up the computer (if the computer has a wireless card, make sure it is off).
9) Try to ping the router. To do this, click the "Start" button > All Programs > Accessories > Command Prompt. A black DOS box will appear. Enter the following: "ping 192.168.1.1" (no quotes), and hit the Enter key. You will see 3 or 4 lines that start either with "Reply from ... " or "Request timed out." If you see "Reply from ...", your computer has found your router.
10) Open your browser and point it to 192.168.1.1. This will take you to your router's login page. Leave the user name blank (note: a few Linksys routers have a default user name of "admin" (with no quotes)), and in the password field, enter "admin" (with no quotes). This will take you to your router setup page. Note the version number of your firmware (usually listed near upper right corner of screen). Exit your browser.
If you get this far without problems, try the setup disk (or setup the router manually, if you prefer), and see if you can get your router setup and working.
If you cannot get "Reply from ..." in step 9 above, your router is dead.
If you get a reply in step 9, but cannot complete step 10, then either your router is dead or the firmware is corrupt. In this case, use the Linksys tftp.exe program to try to reload your router with the latest firmware. After reloading the firmware, repeat the above procedure starting with step 1.
If you need additional help, please state your ISP, the make and model of your modem, your router's firmware version, and the results of steps 9 and 10. Also, if you get any error messages, copy them exactly and report back.
Please let me know how things turn out for you.
Message Edited by toomanydonuts on 01-21-2008 04:40 AM

I need help proving the date tag on a photo stored in my iPhoto is from the date it was sent to my iphone/date it was imported into iphoto - and that it is NOT the date the photo was actually taken. Please help!

I need help proving the date tag on a photo stored in my iPhoto is from the date it was sent to my iphone/date it was imported into iphoto - and that it is NOT the date the photo was actually taken. I recieved a photo via text on my iphone and then I synced my iphone to my macbook and now it is in iphoto. I already know that the date on the photo per the tag that shows up on it in iphoto is NOT the date the photo was actually taken. I need article or literature or something confirming the tag is from when it was sent to the iphone and/or when it was imported. I greatly appreciate some assistance!

All I am trying to do is find something on a forum board or article etc stating that the the date showing in iphoto could be the date it was imported or synced or sent to me and not the actual date taken.
The date on the photo could be anything because you can edit the date with iPhoto or any of 100 apps, free and paid for. So, the date on the photo will prove nothing, I'm afraid.
Regards
TD

In the process of trying to purchase an app, it pops up and says please contact itunes to complete this tranaction

???????????????/in the process of trying to purchase an app, it pops up and says please contact itunes to complete this tranaction

You probably need to contact iTunes store support: http://www.apple.com/emea/support/itunes/contact.html.

Need help with the session state value items.

I need help with the session state value items.
Trigger is created (on After delete, insert action) on table A.
When insert in table B at least one row, then trigger update value to 'Y'
in table A.
When delete all rows from a table B,, then trigger update value to 'N'
in table A.
In detail report changes are visible, but the trigger replacement value is not set in session value.
How can I implement this?

You'll have to create a process which runs after your database update process that does a query and loads the result into your page item.
For example
SELECT YN_COLUMN
FROM My_TABLE
INTO My_Page_Item
WHERE Key_value = My_Page_Item_Holding_Key_ValueThe DML process will only return key values after updating, such as an ID primary key updated by a sequence in a trigger.
If the value is showing in a report, make sure the report refreshes on reload of the page.
Edited by: Bob37 on Dec 6, 2011 10:36 AM

Need help regarding the location of Exchange 2013 Logs for parsing

Hi, I am trying to create reports based on the logs that are created on my exchange server. I am using
exchange 2013. My problem is that I cannot handle every log, and instead want specific types of logs.
I need help finding the specific locations of the following types of logs (If they even exist), so that I can parse them and use them effectively:
Audit Logs (Mailbox logons, Mailbox permission changes, Mailbox property changes,
Exchange store changes)
Mail Report Logs (Mailbox size and growth, Mailbox storage growth, Enabled users, Expired and Soon-to-Expire Mailboxes)
Exchange Traffic Reports (Details on size and amount of messages sent and recieved, Internet traffic [to and from], Traffic between exchange users)
I understand this might sound like a huge undertaking, but any help that can be provided would be appreciated.
Again, I need information on the locations of these types of logs on the exchange server, so that I can parse them. Collecting them all and searching through them is not practical for my available resources.
Thanks,
Matt

Audit Logs (Mailbox logons, Mailbox permission
changes, Mailbox property changes, Exchange
store changes) ---- these are two type of logs, 1. mailbox audit logs and that is stored in each mailbox under dumpster
http://technet.microsoft.com/en-us/library/ff461930(v=exchg.150).aspx however you need to
enable
it for individual mailboxes... 2. admin audit log, this is stored into a system mailbox dumpster.... http://technet.microsoft.com/en-us/library/dd335052(v=exchg.141).aspx
Mail Report Logs (Mailbox size and growth, Mailbox
storage growth, Enabled users, Expired and Soon-to-Expire Mailboxes) ---- there isn't any specific log for this, you would need to create some time of script to collect this every day for you and store it somewhere... This is a good start... http://www.stevieg.org/2011/06/exchange-environment-report/
Exchange Traffic Reports (Details on size and
amount of messages sent and recieved, Internet traffic [to and from], Traffic between exchange users) ----- This you can get from message tracking log... http://technet.microsoft.com/en-us/library/bb124375(v=exchg.150).aspx

I need help on the below problem..

Hi All,
I need help on the below problem..
I've 2 Schemas called
1. MAXIMO and DBLink is GQMFOF
2. GQMMGR adn DBLink is MAXFOFNC
Now i would likw to retrive the data from both the schemas,
i.e some columns from WORKORDER table of maximo schema and some columns from ESTIMATE_HEADER table
of GQMMGR schema..
I'm trying to get the data using DB links, but it is giving TABLE/VIEW doesn't exist.
Please help me on this.
Regards,
gr.

Does your user has the SELECT privelage granted for accessing those tables?

My Firefox.exe process remain open after I close the browser.If I open it it's says to open a new window.I need to close the process manualy(Ctrl+Alt+del).What can I do?Thanks .

Need to close the process.

It does take Firefox a while to shut down; it has to update some databases. But it should take less than a minute.
In the support article, this problem is called a "hang at exit" because Firefox hangs when shutting down. Maybe something here will help: https://support.mozilla.com/en-US/kb/Firefox+hangs#Hang_at_exit
Also, sometimes open Firefox windows disappear from the Task Bar. You can use Alt+Tab to switch to them if they remain open.

While I was updating my ipod touch to ios 6 the battery got drained during the process, i tried restoring it, it couldnt now my ipod is stuck on the Apple logo screen.

while I was updating my ipod touch to ios 6 the battery got drained during the process, i tried restoring it, it couldnt now my ipod is stuck on the Apple logo screen.
Can anyone help me with this issue???

Connect your iTouch to your PC then open iTunes, if iTunes does not recognize your device, try to hold the SLEEP Button and the HOME button at the same time (iPod Reset) for a couple of seconds until the "Charging Tone sounds, now you should be seeing your device name in the iTunes " Device List". If you do, just click RESTORE and iTunes will automatically restore your iTouch to original set-up and download the iOS6 update.
Hope this helps..

Need help in the process of trying to downgrade back to iPhoto '09...

Similar Messages

Maybe you are looking for