Need help in Timer to make it countdown
Hello Sir,
I have a problem to implement my project. I have made some mobility program to ask a user for questions such as Exam Test. But I need to implement the Timer in to my project. How can I implement it? I would like to see some basic example such as how to set the initial time and the finish time, when finish call another function and calculate total used time.
Thanks for your help!
What To Do If Your Mac Is Lost Or Stolen
If you activated Find My Mac before it was lost or stolen, you can track it only if it is connected to the Internet by Wi-Fi. What you cannot do is track your computer using a serial number or other identifying number. You cannot expect Apple or anyone else to find your computer for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty. Be sure to report the loss or theft to the local police. Have the serial number handy. If your Mac is found it cannot be returned to you if you don’t have the serial number and proof of purchase.
Find My Mac can be used from Find My Phone at iCloud.com and via Find My Phone on your iDevice.
The following is third-party anti-theft software:
1. STEM 2.1
2. MacPhoneHome 3.5
3. MacTrack 7.5.0
4. VUWER 1.7
5. Sneaky Bastar* 0.2.0
6. Undercover 5.1.1
7. LoJack for Laptops
8. Hidden 2.0
9. Prey 0.6.2
Similar Messages
-
All of my apps on my new ipad2 are not working. I had this iPad about 4 months and nothing bad has happened before this. I need help on how to make my apps stop crashing. All my built in apps are fine though. WHATBCAN I DO TO MAKE MY APPS STOP CRASHING. I ALREADY TURNED IT OFF THEN ON AGAIN AN IT STILL CRASHES. HELPPP!!!!
Try a reset. Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo. Ignore the red slider.
-
i need help. every time i turn on my laptop an error message pops up: the procedure entry point sqlite_wao -checkpoint could not be located in the dynamic link library SQLite3.dlll HOW DO I FIX THIS?
Hi whatsthe77,
Welcome to Apple Support Communities.
You may want to follow the steps in this article to reinstall iTunes:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Have a great day,
Jeremy -
Hi I need help first time here converting a file
Hi I need help first time here converting a file
Thank you for your subscription to our service. Please see below.
How to convert your file to PDF file:
Using Adobe Reader:
Launch Adobe Reader X or Reader XI
Select “Tools” and click “Sign In” link to sign in with your Adobe ID and password
Select “Create PDF” then click “Select File” button
Click “Convert” after select your file
Click “Download Converted File” link to download the file to your computer after the process is completed.
Using Web UI
Log into https://createpdf.acrobat.com/signin.html with your Adobe ID and password
Select “Convert to PDF”
Click “Select Files” button then choose your file Click “Download” button in the progress bar after completion of the process to download the PDF file to your computer.
Converted PDF files are stored at https://files.acrobat.com and you can log in with your Adobe ID and password. You can share your files with others or download them to your computer.
Please let me know if you have further questions.
Hisami -
need help. Before I set up my I-pad i need to regain access to my I-Tunes account, easy enough. The problem is I cannot re-set password. I have tried to re-set and send to my designated email but it does not work. How can i get someone from Apple on the phone to help?
Have you forgotten your password? - if so, you have a problem if the email address has gone dead.
If you know your password, go to the iTunes Store, click on Account. log in and you can change the associated email address.
If you don't know your password, and have no email address, you are going to have problems because it's difficult to see how Apple are going to identify you as the authorised owner of the account. Contact iTunes Support: go to http://www.apple.com/support/itunes/ - click on 'Other iTunes Store Features' in the list and then on 'Podcasts'. You will see a link to either 'Express Lane', which will guide you eventually to some contact options, or you may see a link to email them. -
Hi
I'm trying to make backups using Time Machine but an error occurs "Time Machine can't continue because a problem with a file. The problem could be temporal please try later"
Because I need to have my info backed up tried to copy to another HD so other error "The operation can't be completed because an unexpected error occurred (error code -41)
I have noted that some files are blocked, but can't be unblocked clearing the mark of blocking, so them can't be moved to the trash basket.
Anybody would help me please?There is a mark on the icon file. When you access "get Info" of a file one of the attributes is "Protected" I can't remove this mark on it, so I can't remove the file from disck
Thanks for your help -
Hello, I am new to this forum and this is my first post. Currently I have a Macbook pro and it is really the only computer in my house I use. My Mom has a Macbook, My dad has a Apple Desktop and my brother a toshiba laptop.
I am running OS X 10.5.8 on my macbook pro, Snow Leopard on the other.
Tonight I got the time capsule, and I am really excited to get this working. To give a little background, I have FiOS and our modem is in the basement which runs directly to a verizon wireless router, MI424WR to be exact. I have a few questions about how to set it up because I tried to set it up like they said but when I plugged the Time Capsule into the Fios router and turned it on all I got on the Capsule was the blinking amber light. I ran an ethernet cord from one of the opened LAN ports on the router to the WAN port on the Capsule. I installed the Airport utility on my macbook and my dads desktop but still do not get any type of connection to the capsule. I am reading about bridging so I tried to do the manual set up in the Airport utility it just scanned and got nothing and I cannot even hit manual setup. My questions are..
How exactly do I set up the Time Capsule, as I described it does it sound like I have everything plugged in correctly?
Is it possible to completely get rid of the verizon router?
How do I get any of my computers to pick up the time capsule?
If you have any questions as to how I explained please just ask. I am really trying to get this set up because I do not want my dad to think he wasted 350 dollars on something that is completely useless for our home setup. Any help would be greatly appreciated. THANK YOU, Zach.No matter what, even when the TC is plugged into my MBP with an ethernet cable it does not read it.
Disconnect any ethernet cables that you connected to the Time Capsule at the moment
Hold in the reset button on the back until the amber light begins to blink more quickly and continue holding the button another 4-5 seconds when this occurs. Then release the reset button.
Connect an ethernet cable from one of the available LAN <-> ports on the Verizon router to the WAN (circle of dots icon) port on the Time Capsule.
You have two ways to configure the Time Capsule using either wireless or ethernet.
To use wireless, click on the fan shaped Airport icon at the top of the computer screen and look for a wireless network with a name like Apple Network xxxxxx. Log on to that network first, then open AirPort Utility.
To use ethernet, temporarily connect an ethernet cable from your Mac to one of the LAN <-> ports on the Time Capsule. Open AirPort Utility.
When you open AirPort Utility, click Continue to follow the guided setup. You did not indicate whether you want to Time Capsule to provide a wireless network, but most users want that option. So, you when asked how you want to configure the Time Capsule, you would choose the "Create a new wireless network" option.
As the Jolly Giant says, you will need to choose Bridge Mode when you see a choice of how to connect in the setup process. If you are an experienced computer user, you may want to configure the Time Capsule manually, but I would not recommend that you do this unless you know exactly what you are doing.
My next step is to call verizon and say they need to get out here and fix this ** or I will be going back to comcast.
Verizon has nothing to do with the Time Capsule problems that you have encountered. Blaming them will accomplish nothing. -
Need help big time with pop-up window!
This is probably an easy answer, I'm not a programmer or a back end guy whatsoever, I'm a graphic designer trying to make his way through a project for a client.
I'm working up a Flash template, and I need to make a simple pop up window that will view a more detailed version of an image. The template has a pop up window system where you add your photo to a certain frame of a movie clip. The problem is, the pop ups have scroll bars built in, and for the life of me I couldn't figure out how to get rid of them, so I duplicated one of the movie clips that looked like it housed the framework of the pop up and deleted the scroll bar (I didn't delete any of the scroll bar code because I had no idea what I was doing). It actually kind of worked, but the pop up window is a bit too wide and doesn't look right.
You can view my hack job here...
http://truetilldeathhq.com/main8_v7/main8_v7.html
Stay on the "Print" page and click the first "01" button and an ad for Ford will come up. Click the "Detailed View" button in the description to see the pop up window.
My question is, there MUST be an easier way to make a pop up window than the workaround I'm using with the template. What I'm trying to do is have a pop up for each sample of the work (all images would be the same size) for the first four buttons, and then for the "Online Banners" page, have the pop up open up to the dimensions of the particular banner ad and play the swf. The pop ups shouldn't have scroll bars, only a title and the button to close the window.
To view the template files, you can download them at:
http://truetilldeathhq.com/main8_v7/main8_v7.fla
The "descripton" movie clips have the descriptions and the "Detailed View" links in the frames, and the movie clips I not so gracefully butchered to get the pop up to work were TM_page_content_scroll (where you're supposed to put an image in a certain frame and then put the # of that frame in the Actionscript of the "Detailed View" button), and the TM_main_cont_page2 and TM_pop_up_main3, which were the ones I duplicated.
If ANYONE can offer even the slightest bit of help, I gratefully appreciate it. I've been working on this thing for like 15 hours a day and I can't even think straight at this point, thanks!I admit to not having read everything you wrote... there's just too much of it. But...
Hashtable (and HashMap, which you should really be using unless you have some external constraint requiring the use of Hashtable) map each key to a single value object.
That is, you can map from the key string "4996" to one single other object. And then you can also map from a different key to a different object.
In you put() method, you add a mapping from "4996" to "good", and then you replace that mapping with one from "4996" to "home". There is only ever one value associated with a given key.
To map multiple values to a single key, you need the value object to be a collection of some kind (or an array). So, you could map your string "4996" to a List, and that list could contain the strings "good", "home", etc. -
Need help understanding Time Capsule file structure and how to get it back
I have the original Time Capsule on which I backup both my Mac Pro and my wife’s Macbook. When Snow Leopard came out, I successfully used the ‘Restore from Time Machine’ feature on my Mac Pro so I know it has worked. However, my wife’s MacBook harddrive died the other day and I was trying to do the ‘Restore from Time Machine’ and all it would find was a backup from April (when I put her in a new larger drive). Time Machine would not find any backup files newer that April. She stated that she had seen the the Time Machine backup notices regularly and as recent as the day the haddrive died (Nov. 23) so I figured that I should have no problem. Here is what I have found in my trouble shooting and what leads to my questions below.
This is the file structure I found: (note that our ID’s are ‘Denise’ and ‘John’)
*Time Capsule* (the drive as listed in my Finder window sidebar under ‘shared’)
>Folder called ‘Time Capsule’ (when logged in as either ‘Denise’ or ‘John’)
>>Denise Sparsebundle
>>>Backup of Denise’s iBook (mounted image)
>>>>Folder called ‘Backups.backupdb’
>>>>>Folder called ‘Denise’s iBook
>>>>>>Single folder with old April backup (not the right files)
>>John Sparsebundle
>>>Backup of John’s Mac Pro (mounted image)
>>>>Folder called ‘Backups.backupdb’
>>>>>Folder called ‘John’s Mac Pro’
>>>>>>Folders containing all my backup files
>Folder Called ‘Denise’ (if logged as ‘Denise’)
>>Denise’s Sparsebundle (a disk image)
>>>Backup of Denise iBook (the mounted image. Name from old machine)
>>>>Backups.Backupdb
>>>>>Denise’s iBook (Contains the backup I need)
>Folder Called ‘John’ (if logged in as ‘John’)
>> (empty)
For some reason, my wife’s backup files are stored within a folder located at the top level of the Time Capsule drive called ‘Denise’, however, mine are within a folder called ‘Time Capsule’ which is at the same level as the ‘Denise’ folder.
For some reason, when trying to use Time Machine to recover, it bypasses the top level ‘Denise’ folder which contains the correct files and goes into the ‘Time Capsule’ folder and finds the outdated backup files.
I would assume that both my backup files and my wife’s should be at the same level of the Time Capsule.
I was eventually able to use Migration Assistant to recover the files after installing a fresh OS and mounting the correct Sparsebundle image.
So, my question, how do I get this fixed so that if I have to recover a drive with Time Capsule, it will find the correct files.
Sorry for the long post and thanks in advance for any help.John Ormsby wrote:
What I was trying to determine is why different backups for one particular machine are located at different file structure levels on my Time Capsule and why the most resent one for that machine is at a different level that for my other machine. Also, what is the correct level that both machines backups should be at.
well John, first can you clarify if you are on 10.4.8 as your profile suggests ? if so, i'm wondering how you can use TM at all because TM was introduced with Leo. if you're not on 10.4.8, please update your profile. if you could, please also indicate details of your machine such as available RAM, processor, etc.
second, what OS is your wife's machine running ?
third, i frankly don't know too much about TM's file structure or if there indeed is such a thing as the correct one. however, i do know that it is best to leave TM to do its thing (as long as it's working). FWIW, though off-topic, you may want to have a look at this read for further information.
last but not least, i see TM backups to my TC only as a part of my backup strategy. the backbone of my strategy is to create bootable clone of my startup disk(s) using e.g. Carbon Copy Cloner on a regular basis. while TM is capable of doing a full system restore, i don't trust it as much as a working clone. i use TM to retrieve a file i accidentally trashed a week ago but you cannot boot from a TM backup if your startup disk goes belly up.
If I have missed this information in either the FAQs or the Troubleshooting article, I would greatly appreciate being pointed to it .
i expect you didn't miss anything and i'm sorry you didn't find any help there. perhaps if Pondini (author of the FAQ and troubleshooting user tips) reads this thread, you will get the necessary advice on the file structure and more besides.
good luck to you ! -
Need help in Time Series report
Dear experts,
I have a report tcode : S_ALR_87012257, that displays a 10-year actual/actual comparison for a certain GL. The user wants to add a check box where he can choose to display GL accounts with ZERO balances.
If i need to customize the report by making it into ZS_ALR_87012257.. what is the real program behind it? i've checked the source code.. and debugged it..
but it is like calling an FM one after another.. it shows
as the name of the extended report..
D_SREPOVARI-EXTDREPORT = 'FBR 01RFRRS01 0SAPBLNCE-10' -->> it doesn't make any sense to me..
and i couldnt find a program called whether 0SAPBLNCE-10 or 01RFRRS01 or etc to make it into a customized program..
or is this just a functional guy's work? if so, pls tell me..
so, if anybody knows, pls help me..
thanks in a million..I had trouble with Hyperion reports doing the same thing and Hyperion reports uses report scripts in the background. For me it was worse, It would lose knowledge of the DTS members. The only way I could get it to correct was to stop the reports and Essbase services and restart them. IT tended to occur during heavy report activity. I could never get an answer from the help desk that solved it othen than to do what I was doing recycling the services.
-
Need help Using Time Capsule As Media Server
New time capsule owner was wondering if someone could help me set it where i can put all my digital media, Itunes, Dvd-rips on to the TC and use it as a Media Server.
Thanks for your help fellasYou will need to run media server on a PC / Mac and use TC as NAS that stored your media files.
-
I wrote a few days ago about this and was told that gathering
information from a form using Post as the method and having the
results emailed to someone wasn't a good idea and that it didn't
work very well. People basically told me to investigate scripting
or hiring someone, or use a pay service like MailChimp. None of
these are options for me right now, I absolutely have to get this
site done tonight and the person I'm doing it for will not pay for
a service.
The client wants to have a form on his site to collect email
addresses so he can compile them into a mailing list to send out
infrequent emails notifying people of upcoming events he's putting
on. He's a local artist with a very modest following, nothing big
time. I have no idea about databasing or MySql, and the person
doesn't want to pay for a service, so basically I'm stuck doing it
the "unreliable" way.
Can someone walk me through how to do this in Dreamweaver? I
assume I add a form field, and put a text field and submit button
inside of it. Here's my questions, to get this to work and use the
mailto: thing, what do I put for...
Form Field: Name, Action, Method, Target, Enctype
Text Field: Name
Button: Type, Name, ID, Value
Any help would be greatly appreciated by one stressed out,
hack web designer, thanks!If this client doesn't want to pay for a service then tell
him the best
you can do is gather INDIVIDUAL emails from his site and have
them
emailed to their email address. Then it's up to them to mail
out to
their modest following INDIVIDUALLY.
Basically you put a form on the site to collect the email
address of the
user. Like this:
<form name="emailForm" method="post"
action="formmail.php">
<p><label for="email">Enter email
address</label><br>
<input type="text" id="email" name="email"> </p>
<input type="submit" name="Submit" value="Submit">
</form>
You would then need to send the submitted form to a formmail
script
which will then send it on to the clients email address.
A free script named Formmail does exist if you search for it
in google
under Free formmail script
You would need to alter the script as per the instructions
which should
come with it and then upload it to your cgi-bin assuming you
have one on
your server.
You then point the form at the script by filling in the
action attribute
like:
<form name="emailForm" method="post"
action="
http://www.yourdomain.com/cgi-bin/formmail.cgi">
I no longer use formmail because it can be a bit of an issue
to set up
for beginners.
I now tend to use server side scripting like php to gather
the
information. IF you have php running on your server then
NateMail is
FREE and very very simple script to set up. It comes with
clear pdf
instructions that will do the job in about 10-15mins.
http://www.mindpalette.com/scripts/index.php#NMAnchor
xslamx wrote:
> I wrote a few days ago about this and was told that
gathering information from
> a form using Post as the method and having the results
emailed to someone
> wasn't a good idea and that it didn't work very well.
People basically told me
> to investigate scripting or hiring someone, or use a pay
service like
> MailChimp. None of these are options for me right now, I
absolutely have to
> get this site done tonight and the person I'm doing it
for will not pay for a
> service.
>
> The client wants to have a form on his site to collect
email addresses so he
> can compile them into a mailing list to send out
infrequent emails notifying
> people of upcoming events he's putting on. He's a local
artist with a very
> modest following, nothing big time. I have no idea about
databasing or MySql,
> and the person doesn't want to pay for a service, so
basically I'm stuck doing
> it the "unreliable" way.
>
> Can someone walk me through how to do this in
Dreamweaver? I assume I add a
> form field, and put a text field and submit button
inside of it. Here's my
> questions, to get this to work and use the mailto:
thing, what do I put for...
>
> Form Field: Name, Action, Method, Target, Enctype
>
> Text Field: Name
>
> Button: Type, Name, ID, Value
>
> Any help would be greatly appreciated by one stressed
out, hack web designer,
> thanks!
> -
I need help with using the Make With Top Object envelope distortion.
I'm doing a project for school called "Ocean Of Stars". I have a few objects,a sheet of purple stars and a few blue gradient colored circles. I need to merge the stars and the circles as one object, but when I click the Make with top object command, the color in the cicles disappear. I don't know what I'm doing wrong.
this is what my screen looks like now.
And this is what I need to make.
Any help is greatly appreciated!
Thanks!His spheres are 3d yours are 2d. See what happens when you revolve a 1/2 a sphere. You will find a way to apply the stars in that same dialog box if you look really hard.
-
Face time not working. When dialled it says connecting and drops immediately. When my friends calling it show connecting but it does not.
Is there a problem with face time. I am in south Africa, it was working perfectly up to Easter. Please help this is my life line.There is a barely acknowledged issue. For Mac users Apple has released an update to the app, but for iOS users the recommendation is for users to update their ipad to the most recent operating system.
There may be a fix coming for iOS6 users (which seem to be many of those having problems) or there may not be. If your ipad isn't up to date then you can update it and see if that helps, or if you don't want to update then you may want to wait and see if there is either a fix or if it fixes itself. -
Need help copying Time Machine backups to new drive
I was attempting to move my Time Machine backups from one hard drive to a newer hard drive, by copying the Backups folder. It gets through the process of preparing the files to copy but then as it starts to copy the file I get an dialog error box saying that it can't convert one file and that I need to install a newer version of IWork. I don't have IWork installed on this computer, but I have used pages on the iCloud website. I have attached a screen shot showing the error. The copying stops at this point. Does anyone have any suggestions on how to proceed?
That usually works better than a Finder copy and is often faster.
If required.
Inherit a Backup
Inherit a Backup (2)
Maybe you are looking for
-
?
-
New VO to substitute an existiting seeded VO wo extending the seeded VO
Hello All, Is it possible to deploy a new VO by substituting the existing VO without extending the existing VO. ========== I mean, There is seeded VO pointing to couple of seeded EO's. Now I want to extend this VO but want to completely replace exist
-
ReportContextAttributeMessage does not highlight field
Hi I have a node named Params, and I have created the elements under that dynamically. One of the elements created dynamically is "Rating". I need to check if the input field(created dynamically) mapped to "Rating" is null or not. if it is null, I ne
-
Why can't I save my Pages file?
I have created a new Pages document and when i try to save it, I get the message, "The file 'Untitled.pages' couldn't be opened. Any ideas why?
-
Trouble starting touchsmart, startup repair 3 times before start, getting error 100c
i have touchsmart iq500 series, hard drive crashed, was replaced, will not start correctly, have to perform startup repair 3 or 4 times before it will start and reads error 100c