Need help in tranfering contacts

hi.. need help in transfering my created contact from my windows pc outlook to my iphone 3g without lossing my contacts in my iphone..... because i tried creating one contact using my outlook in my windows pc and sync it to my iphone using itunes but it erases my contacts in my iphone replacing only one contact that i created in my outlook good thing i have a back up so pls help me on this... thanks

You should see a dialog box prompting you to choose Merge or Replace. You need to choose Merge to preserve your contacts.

Similar Messages

I need help syncing my contacts between Outlook and iPhone using iTunes. I followed the steps given and ended up with just email addresses showing in my contacts even though I have phone numbers and snail mail in my Outlook Contacts. Using Windows 7

I need help syncing my contacts between Outlook and iPhone using iTunes. I used the knowldge document and set it up to transfer my Outlook contacts to the iphone using itunes.
In contacts on the iphone I only see the email addresses.
Yet in Outlook I have email, snail mail and phone numbers.
I followed the knowledge document from iphone.
I did it once, didn't work so deleted all the contacts from the phone and tried again. Same result. I have a PC using Windows 7 64 bit.

You can't access an Exchange account via ActiveSync with the Address Book and iCal on your Mac.
You can access a MM account with Outlook on your PC at work and keep your MM email account server stored mailboxes synced between your PC at work, your iPhone, and the MM "cloud". Not sure about syncing MM contact info and calendar events with Outlook at the same time with an Exchange account.
This will not provide for syncing your Exchange account contact info and calendar events with the Addresss Book and iCal on your Mac because the accounts are separate.
You can access an Exchange account and a MM account at the same time with the iPhone's mail client, and sync contact info and calendar events over the air with both accounts at the same time. You can view combined contact info or separately for each account, and the same for calendar events.

HT1386 I need help getting my contacts transferred from my old phone to my new one

I need help getting my contacts transferred from my old iphone to my new one

Either backup the contacts in iCloud or with a compatible programme on your computer (Outlook, Windows Contacts, Address Book etc).
Once done, sync the contacts to your new iPhone from that programme/iCloud.
Read "Contacts"
http://support.apple.com/kb/HT1296
http://support.apple.com/kb/HT4859

Need help to redeem contact code for OS X 7

Need help to redeem contact code for OS X 7

Hello NOREDEEM,
Thanks for using Apple Support Communities.
If you have the purchase code for OS X 10.7 Lion, then you can follow the directions below to redeem it on your Mac.
Mac App Store: Redeem gift cards and download codes
Take care,
Alex H.

Need help with PHP contact form

Hi guys,
I've made a PHP contact form for my site and need help with a couple of things:
The form action links an external PHP script (scripts/contact-form-script.php) but is there a way I can have it so the PHP script for the form is contained within the same PHP file as my contact form (contact.php)?
I tried just putting the form code at the top of contact.php but the browser automatically reads the anti-spam re-direct, so maybe that needs revising too?
The second thing is, how can I make the Name, Email and Message fields mandatory? So if a user tries to submit the form and hasn't filled in one of the required fields and clicks submit, contact.php reloads with a message at the top of the form saying something like 'Complete the required fields' and highlights the relevant field with a red border?
Here's the code for contact.php:
<form action="http://www.mydomain.com/scripts/contact-form-script.php" method="post" name="contact" id="contact">
<p><strong>Name:*</strong><br />
<input name="name" type="text" class="ctextField" /></p>
<p><strong>E-mail:*</strong><br />
<input name="email" type="text" class="ctextField" /></p>
<p><strong>Telephone:</strong><br />
<input name="telephone" type="text" class="ctextField" /></p>
<p><strong>Company:</strong><br />
<input name="company" type="text" class="ctextField" /></p>
<p><strong>Address:</strong><br />
<input name="address1" type="text" class="ctextField" /></p>
<p><input name="address2" type="text" class="ctextField" /></p>
<p><strong>Town:</strong><br />
<input name="town" type="text" class="ctextField" /></p>
<p><strong>County:</strong><br />
<input name="county" type="text" class="ctextField" /></p>
p><strong>Postcode:</strong><br />
<input name="postcode" type="text" class="ctextField" /></p>
<p><strong>Message:*</strong><br />
<textarea name="message" cols="55" rows="8" class="ctextField"></textarea></p>
<p><input name="submit" value="SEND MESSAGE" class="submitButton" type="submit" /><div style="visibility:hidden; width:1px; height:1px"><input name="url" type="text" size="45" id="url" /></div></p>
</form>
And this is the PHP I'm using to submit the form data for contact-form-script.php:
<?php
$headers .= "Reply-To: " . $_POST["email"] . "\r\n";
$to = "[email protected]";
$subject = "Contact from website";
$message = $headers;
$message .= "Name: " . $_POST["name"] . "\r\n";
$message .= "E-mail: " . $_POST["email"] . "\r\n";
        $message= '
            <table cellspacing="0" cellpadding="8" border="0" width="500">
            <tr>
                <td colspan="2"></td>
            </tr>
            <tr bgcolor="#eeeeee">
              <td width="154" style="font-family:Verdana, Arial; font-size:11px; color:#333333;"><strong>Name</strong></td>
              <td width="314" style="font-family:Verdana, Arial; font-size:11px; color:#333333;">'.$name.'</td>
            </tr>
            <tr bgcolor="#eeeeee">
              <td style="font-family:Verdana, Arial; font-size:11px; color:#333333;"><strong>E-mail address:</strong></td>
              <td style="font-family:Verdana, Arial; font-size:11px; color:#333333;">'.$email.'</td>
            </tr>
            <tr bgcolor="#eeeeee">
              <td style="font-family:Verdana, Arial; font-size:11px; color:#333333;"><strong>Telephone number:</strong></td>
              <td style="font-family:Verdana, Arial; font-size:11px; color:#333333;">'.$telephone.'</td>
            </tr>
            <tr bgcolor="#eeeeee">
              <td style="font-family:Verdana, Arial; font-size:11px; color:#333333;"><strong>Company:</strong></td>
              <td style="font-family:Verdana, Arial; font-size:11px; color:#333333;">'.$company.'</td>
            </tr>
            <tr bgcolor="#eeeeee">
              <td style="font-family:Verdana, Arial; font-size:11px; color:#333333;"><strong>Address</strong></td>
              <td style="font-family:Verdana, Arial; font-size:11px; color:#333333;">'.$address1.'</td>
            </tr>
            <tr bgcolor="#eeeeee">
              <td></td>
              <td style="font-family:Verdana, Arial; font-size:11px; color:#333333;">'.$address2.'</td>
            </tr>
            <tr bgcolor="#eeeeee">
              <td style="font-family:Verdana, Arial; font-size:11px; color:#333333;"><strong>Town</strong></td>
              <td style="font-family:Verdana, Arial; font-size:11px; color:#333333;">'.$town.'</td>
            </tr>
            <tr bgcolor="#eeeeee">
              <td style="font-family:Verdana, Arial; font-size:11px; color:#333333;"><strong>County</strong></td>
              <td style="font-family:Verdana, Arial; font-size:11px; color:#333333;">'.$county.'</td>
            </tr>
            <tr bgcolor="#eeeeee">
              <td style="font-family:Verdana, Arial; font-size:11px; color:#333333;"><strong>Postcode</strong></td>
              <td style="font-family:Verdana, Arial; font-size:11px; color:#333333;">'.$postcode.'</td>
            </tr>
            <tr bgcolor="#eeeeee">
                <td colspan="2" style="font-family:Verdana, Arial; font-size:11px; color:#333333;"><strong>Message</strong></td>
            </tr>
            <tr bgcolor="#eeeeee">
                <td colspan="2" style="font-family:Verdana, Arial; font-size:11px; color:#333333;">'.$message.'</td>
            </tr>
            <tr><td colspan="2" style="padding:0px;"><img src="images/whitespace.gif" alt="" width="100%" height="1" /></td></tr>
         </table>
$url = stripslashes($_POST["url"]);
if (!empty($url)) {
header( 'Location: http://www.go-away-spam-robots.com' );
exit();
mail($to, $subject, $message, $headers);
header( 'Location: http://www.mydomain.com/sent.php' ) ;
?>
Any help on this would be greatly appreciated.
Thank you and I hope to hear from you!
SM

Revised code with form validation for Name Email and Message:
<?php
if (array_key_exists('submit', $_POST)) {
    $name = $_POST['name'];
    $email = $_POST['email'];
    $telephone = $_POST['telephone'];
    $company = $_POST['company'];
    $address1 = $_POST['address1'];
    $address2 = $_POST['address2'];
    $town = $_POST['town'];
    $county = $_POST['county'];
    $postcode = $_POST['postcode'];
    $formMessage = $_POST['message'];
if (empty($name)) {
                                            $warning['name'] = "Please provide your name";
if (empty($email)) {
                                            $warning['email'] = "Please provide your email";
if (empty($formMessage)) {
                                            $warning['message'] = "Please provide your message";
$headers .= "Reply-To: " . $_POST["email"] . "\r\n";
$to = "[email protected]";
$subject = "Contact from website";
$message = $headers;
$message .= "Name: " . $_POST["name"] . "\r\n";
$message .= "E-mail: " . $_POST["email"] . "\r\n";
$headers = "MIME-Version: 1.0\r\n";
$headers .= "Content-type: text/html; charset=iso-8859-1\r\n";
        $message= "
<table cellspacing='0' cellpadding='8' border='0' width='500'>
            <tr>
                <td colspan='2'></td>
            </tr>
            <tr bgcolor='#eeeeee'>
              <td width='154' style='font-family:Verdana, Arial; font-size:11px; color:#333333;'><strong>Name</strong></td>
              <td width='314' style='font-family:Verdana, Arial; font-size:11px; color:#333333;'>".$name."</td>
            </tr>
            <tr bgcolor='#eeeeee'>
              <td style='font-family:Verdana, Arial; font-size:11px; color:#333333;'><strong>E-mail address:</strong></td>
              <td style='font-family:Verdana, Arial; font-size:11px; color:#333333;'>".$email."</td>
            </tr>
            <tr bgcolor='#eeeeee'>
              <td style='font-family:Verdana, Arial; font-size:11px; color:#333333;'><strong>Telephone number:</strong></td>
              <td style='font-family:Verdana, Arial; font-size:11px; color:#333333;'>".$telephone."</td>
            </tr>
            <tr bgcolor='#eeeeee'>
              <td style='font-family:Verdana, Arial; font-size:11px; color:#333333;'><strong>Company:</strong></td>
              <td style='font-family:Verdana, Arial; font-size:11px; color:#333333;'>".$company."</td>
            </tr>
            <tr bgcolor='#eeeeee'>
              <td style='font-family:Verdana, Arial; font-size:11px; color:#333333;'><strong>Address</strong></td>
              <td style='font-family:Verdana, Arial; font-size:11px; color:#333333;'>".$address1."</td>
            </tr>
            <tr bgcolor='#eeeeee'>
              <td></td>
              <td style='font-family:Verdana, Arial; font-size:11px; color:#333333;'>".$address2."</td>
            </tr>
            <tr bgcolor='#eeeeee'>
              <td style='font-family:Verdana, Arial; font-size:11px; color:#333333;'><strong>Town</strong></td>
              <td style='font-family:Verdana, Arial; font-size:11px; color:#333333;'>".$town."</td>
            </tr>
            <tr bgcolor='#eeeeee'>
              <td style='font-family:Verdana, Arial; font-size:11px; color:#333333;'><strong>County</strong></td>
              <td style='font-family:Verdana, Arial; font-size:11px; color:#333333;'>".$county."</td>
            </tr>
            <tr bgcolor='#eeeeee'>
              <td style='font-family:Verdana, Arial; font-size:11px; color:#333333;'><strong>Postcode</strong></td>
              <td style='font-family:Verdana, Arial; font-size:11px; color:#333333;'>".$postcode."</td>
            </tr>
            <tr bgcolor='#eeeeee'>
                <td colspan='2' style='font-family:Verdana, Arial; font-size:11px; color:#333333;'><strong>Message</strong></td>
            </tr>
            <tr bgcolor='#eeeeee'>
                <td colspan='2' style='font-family:Verdana, Arial; font-size:11px; color:#333333;'>".$formMessage."</td>
            </tr>
            <tr><td colspan='2' style='padding: 0px;'><img src='images/whitespace.gif' alt='' width='100%' height='1' /></td></tr>
         </table>
$url = stripslashes($_POST["url"]);
if (!empty($url)) {
header( 'Location: http://www.go-away-spam-robots.com' );
exit();
if (!isset($warning)) {
mail($to, $subject, $message, $headers);
header( 'Location: http://www.mydomain.com/sent.php' ) ;
?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<title>Untitled Document</title>
<style type="text/css">
p {
    margin: 0;
    padding: 10px 0 0 0;
.warning {
    color:#C00;
</style>
</head>
<body>
<form action="" method="post" name="contact" id="contact">
<p><strong>Name:*</strong><br />
<input name="name" <?php if (isset($warning['name'])) { echo "style='border: 1px solid #C00'"; } ?> type="text" class="ctextField" />
<?php if (isset($warning['name'])) { echo "<p class='warning'>".$warning['name']."</p>"; }?>
</p>
<p><strong>E-mail:*</strong><br />
<input name="email" <?php if (isset($warning['email'])) { echo "style='border: 1px solid #C00'"; } ?>type="text" class="ctextField" />
<?php if (isset($warning['name'])) { echo "<p class='warning'>".$warning['email']."</p>"; }?>
</p>
<p><strong>Telephone:</strong><br />
<input name="telephone" type="text" class="ctextField" /></p>
<p><strong>Company:</strong><br />
<input name="company" type="text" class="ctextField" /></p>
<p><strong>Address:</strong><br />
<input name="address1" type="text" class="ctextField" /></p>
<p><input name="address2" type="text" class="ctextField" /></p>
<p><strong>Town:</strong><br />
<input name="town" type="text" class="ctextField" /></p>
<p><strong>County:</strong><br />
<input name="county" type="text" class="ctextField" /></p>
<p><strong>Postcode:</strong><br />
<input name="postcode" type="text" class="ctextField" /></p>
<p><strong>Message:*</strong><br />
<?php if (isset($warning['message'])) { echo "<p class='warning'>".$warning['message']."</p>"; }?>
<textarea name="message" <?php if (isset($warning['message'])) { echo "style='border: 1px solid #C00'"; } ?> cols="55" rows="8" class="ctextField"></textarea></p>
<p><input name="submit" value="SEND MESSAGE" class="submitButton" type="submit" /><div style="visibility:hidden; width:1px; height:1px"><input name="url" type="text" size="45" id="url" /></div></p>
</form>
</body>
</html>

I Need Help Importing my Contacts Onto my New (old) Palm phone.

I need to import my contacts onto my Palm Centro. As of now, they are in a .csv file. When I select import from the Palm Desktop file menu and browse for my contact file, it shows the file grayed out. Even if I instruct the program to allow all file types, it doesn't work. I've read that the Centro needs a .aba file- but I can't find a converter that works.
I'm on a Mac but it has OSX and Windows 7, so I can use any program/service that you guys can suggest. Even if you don't know a program that can do what I need, I also want to know definitively what file format my Palm Centro wants these contacts.
I know this is an old phone, but there must be a way to do this (and avoid typing in 400+ contacts).
Thanks very much in advance!
Post relates to: Centro (Sprint)

Have you tried this program?
http://www.schaik.com/download/palmaba.html
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Need help in deleting contacts

Hi All,
I recently bought Sony Ericsson Cedar. However, I am unable to delete contacts from contacts-look up while sending a message. can anyone kindly let me know how to delete contacts from contacts look-up section?
Solved!
Go to Solution.

There are two possibilities here: 1) These numbers are either stored in your SIM contact list, because you had the Autosave to SIM switched on in your Contact settings, or 2) These numbers are actually saved in the phone memory, although you will not find them in your Contacts phone list because they are temporary files: What you need to do is to actually save these numbers first (when they appear in stand-by when you enter a similar number) and then delete them.Hope this helps.

Foot stand not provided with my replacement WRT-350N - need help with Cisco contact

Hi!
I am starting to feel like Michael Douglas in the movie Falling Down and need some help.
Story:
I finally sent in my faulty WRT-350N router and when I got the replacement everything but the plastic foot stand was included. I want to have my router standing up to save desk space but now I have no foot.
"OK, should not be hard to get Linksys to send me the missing foot stand" was my thought. Now I have called the RMA line and also emailed them and I get a similar answer like Michael Douglas got with a smile
I keep hearing that I cannot get the part since it is not on the product's content list. Like that is *my* problem. I just want the part and do not care whether it is on a list or not. It is the part on top of the router in the picture. I even asked the Linksys representative to Google a bit for WRT-350N and there are foot stands on almost all pictures and it is definitely included in the box. I was told I could go nowhere else for help either with this. I really doubt that but fail to find a channel to Linksys that may be able to help.
If some Linksys representative sees this please help me!
Thanks, Niklas
RMA XXXXX - missing router stand/foot
(Mod note: Edited for guideline compliance. E-mail conversation removed.)
Message Edited by kent07 on 07-01-2009 03:10 AM
Solved!
Go to Solution.

Now it should be working. To moderators, this does not hold any personal info but just want to show the quite long text to read through for the RMA:
Thank you for contacting Linksys Customer Service Department. First of all, we would like to inform you that, if your item has been purchased less than 2 years ago, you have the possibility of replacing it through the place of purchase.
If you want to replace your item through Linksys, we are more than glad to provide you with our assistance. In order to create an RMA ( authorization number for the replacement under warranty), you can do it online at
https://linksysrma.moduslink.com/Consumer/pag/ChooseRegion.aspx.
On the other hand, if you prefer us placing the RMA, please reply to this email including the following information:
Name:
Last Name:
Company Name:
Street Address:
City:
Postal Code:
Day Time Phone Number:
Model (include version):
Serial Number:
Date of Purchase:
Place of Purchase (store):
Once the RMA is created, you will receive a confirmation e-mail with the RMA number on a shipping label ( not a prepaid, as the inbound shipping is up to the customer) and all the terms and conditions . You will have to print three copies of that label. The first copy you are going to stick it in the outside of the box, the second one you are going to join it in the inside of the box and the last one is a copy for you as assurance. Together with this e-mail it will also be included all the terms and conditions. We will strongly appreciate your reading them carefully before sending the item to us. In relation to this, it will be our pleasure to summarize some of the important conditions we state in order to clarify our standard procedure:
Please write down the RMA# ( not the case id#) on the outside of the box with big numbers and letters. Moreover, we recommend our customers to use a traceable shipping method in order to get a tracking number for the delivery. This number will be helpful to track the package in case of any potential inconvenience. Remember that you will have to pay just for the inbound shipping while Linksys will be responsible for the rest of the expenses.
Furthermore, remember to include all the accessories that were included in the original package: Power Supply, Cables, User Guide, CD's. Otherwise, warranty replacement will not be possible to be performed. All other accessories shipped that did not come in the original box may not be returned. Moreover, it is important to remember that you do not have to ship the original box. Also, include on the shipping box a copy of the proof of purchase, not the original.
IMPORTANT: -If your product is part of a network kit just send the defective unit.
If you have further questions do not hesitate to call us or replying to this e-mail. Our lines are open from Monday to Friday from 10 a.m. to 7 p.m. We recommend our customers to have the case id# handy.
Regards,
Linksys Customer Service - EMEA
Linksys does NOT offer refunds, substitutions, credits, or upgrades.
Linksys is NOT responsible for lost packages in transit. Please obtain a tracking number as a safeguard for your shipment. Linksys strongly suggests using a reputable shipping company that will provide a tracking number and will insure the package.
Linksys is not able to accommodate walk-in customers.
Processing the Defective Unit.
Package your return unit(s) in one box, please make sure the contents are secure and that enough packaging material is included to prevent the unit(s) from moving around during shipping.
Please ship the defective unit(s) to the address below.
Linksys RMA/SILS/ML
IJsseldijk 29 in Apeldoorn
7325 WZ Apeldoorn
The Netherlands
All original Linksys accessories, such as power adapters, couplers/dongles, and antennas MUST BE RETURNED with the product.
If you are replacing a product that belongs to a networking kit, only return the defective product listed on the previous web form belonging to the networking kit. Please do not include the working product.
Linksys is NOT responsible for lost packages in transit. Please obtain a tracking number as a safeguard for your shipment. Linksys strongly suggests using a reputable shipping company that will provide a tracking number and will insure the package.
Linksys is NOT responsible for lost or damaged personal accessories. If you have attached any accessories that did not come with the original product, please remove these items prior to returning your unit(s). In addition, if your product uses any internal fiber modules please also remove these items unless they are listed as one of the products on the RMA web form.
Linksys is not responsible for data stored on the hard drive of the defective unit. If the defective unit has a hard drive and it cannot easily be removed form the defective unit, backup your data prior to shipping the defective unit to Linksys.
The customer bears the cost of sending the defective unit(s) to Linksys including all customs fees and applicable taxes.
A COPY of the proof of purchase must be included for all products. A valid proof of purchase includes a copy of the receipt, invoice, or packing slip from the retailer, or distributor. A copy of your credit card statement, internal requisition, or purchase order is NOT considered a valid proof of purchase. DO NOT SEND YOUR ORIGINALS.
Processing the Replacement Unit.
Linksys bears the cost of shipping the replacement unit to the CUSTOMER unless the expedited shipping option is chosen at the time the RMA is created.
Upon receipt of the defective unit, a replacement unit is usually shipped within 3-5 business days
Linksys ships replacement products via GLS ground to customers within the European Union. Non European Union Customer's replacements are shipped FedEx.
In the event of a backorder, units will ship when available, and the shipping method will remain the same as the option selected at the time the RMA was created.
If you wish to change the shipping method, YOU MUST contact the Linksys Customer Service department prior to the replacement unit being shipped. Once the unit has been shipped, the funds paid for expedited shipping cannot be refunded. The Customer Service phone numbers are listed below.
Once you receive your replacement unit, test the unit, and verify that it is working properly.
Damaged or missing part(s) must be reported within five business days of receiving the replacement unit(s).
IMPORTANT: If your unit uses a power supply, make sure to use the power supply that comes with the replacement unit, and not the original power supply.
COUNTRY
PHONE NUMBER
Austria
01360 2772061
Belgium
02 627 7077
Czech Republic
800 800156
Denmark
82 332729
Finland
0800 523062
France
0800 881 026
Germany
0800 1013311
Hungary
06 80 204 548
Iceland
44 207 660 0121
Ireland
1 800 818 188
Italy
02 38 591012
Lithuania
44 207 660 0121
Luxembourg
32 2-627-7077
Malta
44 207 660 0121
Netherlands
0800 020 0101
Norway
235 00060
Poland
00800 331 1345
Portugal
213 180 081
Spain
900 902 207
Sweden
0851 992 251
Switzerland
022 5675 330
Turkey
212 444 2726
United Kingdom
0800 026 1418

Need Help Transferring/Syncing Contacts TO PC

I feel like I have searched everywhere for a solution but haven't found one. I am ultimately trying to export my contacts on my iphone 4 to an excel format. If I can do this directly, excellent. If it's a 2-step process, fine.
I did see that I can sync my contacts from my phone to my Windows Address Book (WAB). I tried that using iTunes (Info, Sync Contacts with "Windows Contacts" and apply), but when I went to my contacts folder in windows, the only contact I saw was a contact file for the username on my computer. Every other topic I've read says that this should work, but obviously in my case it's not.
I do not have outlook or manage my phone contacts in any other application, just my phone.
Am I doing something wrong, can anyone help me out? Thank you in advance.
Here's my specs:
Windows 7 Home Premium 64-bit
iTunes version 10.5.1.42
iPhone 4
iOS 5.0.1 (9A405)

Itunes is on but does not have anything refering to "equipment" as for back up the phone syncs everytime its conected to my laptop

New to iPhone and need help with syncing contacts.

I know how to change the settings in the iTunes view so that I can set it to sync, but when I started the transfer of my iPhone contacts it tells me that 25% of my contacts will change. What does this mean? Does this mean that the contacts on my iPhone will change, or the contacts in my Address Book on my MBP will change?
I'm a bit confused by this. I don't want to lose my address book info (mostly e-mail contacts) and I don't want to contaminate my iPhone contacts with the data in my Address Book.
Thanks for any help.
JRH 2

One alternative would be to set up iCloud and then sync your contacts there. This would keep them on www.iCloud.com (see http://www.apple.com/icloud/setup/ to set this up). Another would be to sync them with Google by setting up a gmail account as and exchange account, which enables contact and calendar syncing. To do this see http://support.google.com/mobile/bin/answer.py?hl=en&topic=14252&answer=138740.

Accident email account delete- need help restore all contacts

Help, this morning I accidentially deleted my email account in yahoo, and now ALL my contacts are gone....how do I restore the contacts. I don't have mobile me set up yet.

Were you provided an option to transfer the backup from your Touch to your iPhone that you accepted?
Which supported application on your computer are you syncing contact info with?
With Vista, this can be with Outlook 2003 or 2007, or with the address book used by Windows Mail with Vista - which is the name change for Outlook Express with Vista. The address book is called Windows Contacts I believe and the sync option for contact info is selected under the Info tab for your iPhone sync preferences.

Need help restoring AddressBook contacts (lost on sync with iphone)

Hi,
Just got a new iPhone 3GS, and have .mac. I had duplicate contacts in my iphone. To fix the problem, I deleted one of each, then synced my phone. I got the warning that 5% or more contacts would change, and continued (50% should change, based on my assumptions). I lost all my contacts. I tried to restore in iTunes using "Restore from backup" but only some of the contacts came back. Is there any way to recover the rest of the lost data?
Thanks for your help.

http://support.apple.com/kb/HT1497

Need help with merging contacts! Please help!!!

Hey guys. I have a little problem with my iPhone 4 with iOS 7. I have recently synced all of my contacts with iCloud so that I will be able to export them to my pc, but this is not the problem. Since I was deleting some of the contacts I have noticed that there is a possibility (in the Edit Mode of the contact) to add a Facebook profile. So I tried to do this with a few contacts.
I am attaching a photo of how my contact with Facebook profile linked to it looks like but it's in iCloud (I get the same thing on my iPhone).
Sorry for all the black lines. So when I press the name Betyna ... under the Facebook option I get a new Facebook tab open which says - Page not found. Sorry, this page isn't available. The link you followed may be broken, or the page may have been removed.
This is the same thing I get on my phone.
Can someone help me with a solution to my problem, because I really want to link Facebook profiles to my phone contacts, but without the whole Settings/Facebook/Update Contacts and all?
So please help!!!!!

I'm creating an input source from the string, then i
pass it to the parser. No, you don't. Look at the source again.
byteStream = new
new ByteArrayInputStream(string.getBytes());
InputSource is = new InputSource(byteStream);
parser.parse(byteStream, myParser);//the line that
hat throws the exceptionYou aren't passing the InputSource to the parser at all.
However, why are you using this roundabout way to pass the string to the parser? Why not justparser.parse(new InputSource(new StringReader(string)), myParser);?

Indie Musician Needs Help Integrating ASP Contact Page Into iWeb

Hello Fellow Mac Users. (I just switched from PC to the iMac last month and I am SO happy with it!) The iWeb program is great! I had originally planned to hire someone to create my new music site, but I think what I've figured out how to do in iWeb will work for the time being.
One problem... I want to use a legit contact page (my friend helped design this one for me) which is actually an ASP page. (www.aldenmusic.com/contact.asp) Does anyone know how I can replace my current contact page with the .asp one? I am hosting on another server (Crystaltech) rather than on .mac, if that matters.
I was thinking maybe there is a way to go in and replace the HTML code manually on each page or maybe there is some way to trick iWeb into accepting the .ASP page? I have no idea how this stuff works.
Here is my current site:
www.aldenmusic.com
Any help would be much appreciated!
Thanks in advance for your help!
Nichole ALDEN

I don't think there is any way you can integrate an .asp page into an iWeb site other than by creating a hyperlink to it.

Need Help with hijacked contact lists

Hello all, I am new here, so please forgive me if I'm posting to the wrong board...didn't really see anything more appropriate. I have a problem with a hijacked contact list:
I have three email accounts being forwarded to my BB Curve 8530. Two from Yahoo and one from AOL. In each of these accounts (when accessed directly from yahoo.com or aol.com) have different contacts. Not all of these contacts are in my BB contact list. The other day, one of my yahoo accounts was somehow hacked, and resulted in one of those spam "drugs for sale" emails being sent to people in my contact list. Well, when I investigated, I discovered that actually, someone who is not even in that particular accounts contact list, but another account. How is this possible?
If that is confusing, here's a better summary (using fake email addresses):
[email protected] sent a bogus email message to [email protected]
but, [email protected] is not in [email protected]'s address book. it is in [email protected] [email protected] is not listed in my BB device's contact list.
The only thing I can think os is somehow the BB was hacked, and someone was able to go through all linked contact lists, and send an email across all connected accounts.
How was this able to happen? what can I do to stop it?
thanks!
Lee

This is the Welcome and Introductions section, so Greetings, and welcome!
The 8500 model section would be perfect for your questions,so we'll get it move there.
Meanwhile,
leevalon wrote:
The only thing I can think os is somehow the BB was hacked, and someone was able to go through all linked contact lists, and send an email across all connected accounts.
Sorry, not possible... UNLESS you gave your BlackBerry to someone to use for a while, during which time they spammed all your contacts. Did you?
Do you have a Security password set on the device? If you are afraid of the above happening, setting the password will just that impossible.
But it wasn't hacked.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Need help in tranfering contacts

Similar Messages

Maybe you are looking for